Scribd
Upload
49 views1 page

2 PX 13

This document provides detailed specifications for structural design and fabrication, including dimensions, materials, and coating requirements. It outlines compliance with various Indian standards for construction and design parameters specific to a project in Rampura, Rajasthan. Additionally, it includes notes on tolerances and concrete specifications for foundations.

Uploaded by

naveen.preetindustries
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views1 page

2 PX 13

This document provides detailed specifications for structural design and fabrication, including dimensions, materials, and coating requirements. It outlines compliance with various Indian standards for construction and design parameters specific to a project in Rampura, Rajasthan. Additionally, it includes notes on tolerances and concrete specifications for foundations.

Uploaded by

naveen.preetindustries
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

1 2 3 4 5 7 8

GENERAL NOTES :-

1. ALL DIMENSION ARE IN MM UNLESS OTHERWISE SPECIFIED.


a 2. DO NOT SCALE THE DWG. ONLY WRITTEN DIMENSIONS SHALL BE a
FOLLOWED.
3. FABRICATION & ERECTION SHALL BE CARRIED OUT IN ACCORDANCE WITH
IS:800 AND IS:802
1NO's-11.5Ø EARTHING HOLE 4. DESIGN LOAD CALCULATION SHALL BE AS PER IS 875.
2NO's-13.5Ø HOLE 2NO's-13.5 HOLE 2NO's-13.5 HOLE
50 FOR M12 BOLT FOR M12 BOLT FOR M12 BOLT 2 NO's-11.5 HOLE 50 25
5. STRUCTURAL DESIGN SHALL BE AS PER IS 801.
FOR M10 BOLT
888 600 200 925 MATERIAL :-

b 1. DIMENSION FOR ALL COLD ROLLED STEEL, HAT, CHANNEL SECTION SHALL b
BE AS PER IS-811.
65

2. STEEL GRADE FOR COLUMNS & BRACING CONNECTING CHANNEL SHALL BE

190
S390GD.
3. STEEL GRADE FOR RAFTER, BRACINGS & PURLINS SHALL BE FY550.
60

4. RAW MATERIAL FOR COLUMN & BRACING CONNECTOR SHALL BE AS PER


EN 10346_2015.
4. RAW MATERIAL FOR RAFTER, BRACINGS & PURLINS SHALL BE AS PER
74 IS:15961 (2012).
2738 5. ALL STRUCTURAL FASTENER SHOULD BE GI GRADE 5.6.
6. MODULE MOUNTING BOLTS SHALL BE STAINLESS STEEL SS304.

VIEW X-X COATING :-

c 1. COLUMNS & BRACING CONNECTING CHANNEL SHALL BE MAGSURE 4.5, c


450GSM.
2. ALL OTHER MEMBERS SHALL BE GALVALUME AZ150 GRADE AND COATING
SHALL BE AS PER IS:15961-2012.

200 100 1338 100 1000


FOUNDATION :-
40

1. ALL CONCRETE MIX M:25 UNLESS OTHERWISE SPECIFIED.

80
2. ALL CONCRETE SHALL BE MACHINE MIXED AND MACHINE VIBRATED.
3. CLEAR COVER TO MAIN STEEL 100MM.

2738 TOLERANCE:-
4NO's-11.5Ø HOLE
1. THICKNESS TOLERANCE AS PER IS: 852-1985.
d FOR M10 BOLT VIEW Y-Y 2. HOLE TO HOLE DISTANCE +/- 1 MM
d
3. EDGE CUTTING +/- 1MM
4. OFFSET +/- 1 MM
5. OVERALL LENGTH +/- 2 MM
6. THE DEVIATION FROM THE ANGLE OF 90 Deg. SHALL NOT EXCEED 1 Deg.

DESIGN PARAMETER :-

1. LOACTION - RAMPURA, HANUMANGARH, RAJASTHAN


2. WIND SPEED - 180KMPH
3. GROUND CLEARANCE - 1000MM
4. TILT ANGLES - 22 DEGREE FIXED.
2 NO's-11.5ØHOLE 5. MODULE MAKE - Renew 545Wp Bifacial
25 50 6. MODULE SIZE - 2278X1134X33.
e FOR M10 BOLT e
1225
A - ISSUED FOR INFORMATION
50

100
B - ISSUED FOR APPROVAL

C - ISSUED FOR CONSTRUCTION

D - AS BUILT
1300

20
VIEW X-X

2
f 190 f

100
2

40

80 BOTTOM COLUMN CL-2


20

100CU40X2
COLUMN CL-1
190CS80X2X20
40

g g
1300

VIEW X-X
Suntrik Solutions

REV. NO. DATE DESCRIPTION MADE CHECK APPROVED DRAWING NAME :


00 18.11.2024 FIRST SUBMISSION NS NS AK COLUMN - CL-1 & CL-2 FOR 2PX26_2PX13
01 14.12.2024 FINAL NS NS AK
h PROJECT NAME : h

2PX26_2Px13
1 2 3 4 5 7

You might also like