Dresser-Rand PHE
Reciprocating Process Compressor
The Dresser-Rand PHE Versatility and Performance Like all Dresser-Rand business reciprocating
reciprocating process The PHE is a horizontally opposed, two- process compressors, the PHE is engineered
compressor provides an throw, reciprocating compressor designed to our high standards, ensuring long-lasting
economical solution where for long-term, process gas service. Designed reliability. It offers a versatile alternative to
full-time, medium volume to API-618 specifications. It can handle a larger, more costly compressors, providing
service is a requirement. Its variety of drivers with either direct or an economic solution for requirements that
proven performance, balanced V-belt connections and can be fitted demand full-time performance in lower
with either lubricated or non-lubricated volume service.
design, and wide range of
cylinders ranging from 1.625 to 19 inches
cylinder selections make the
(41 to 483 mm) in bore diameter.
PHE an excellent choice for a
variety of applications.
[Link]/reciprocating-compressors
Designed and Built With Precision Specifications
With its fine-grain, cast iron frame, the Maximum HP 240 (179kW)
PHE is engineered to provide maximum
Standard strokes 7 inch (178 mm)
support for the running gear and related
components. The rigid frame design and Number of throws 2
balanced crankshaft minimize vibration
Cylinder bore range 1.625 to 19.0 inches (41 to 483 mm)
and provide for low moments and
minimal foundation requirements.
Forged from high tensile strength alloy
steel, the crankshaft is fully stress
relieved and heat-treated. The bearing
journals and crankpin are precision
ground and polished to exacting L
tolerances.
Rugged, precision-machined aluminum
main and crankpin bearings are
generously sized for best run-in and 30in.
long-lasting service. All bearings are (76cm)
ROD
force-lubricated per API-618 REMOVAL
DISTANCE
specifications. Connecting rods are
60in. 180in.
die-forged steel with rifle-drilled (152cm) (457cm)
passages for positive lubrication of the
crosshead
pin and bushing. A shoe-less aluminum
crosshead is standard and requires no
Outstanding Cylinder Dimensions
adjustment.
Design and Selection For API-type distance pieces add
With experience in a wide variety 18 inches (457 mm) to the width
of services, our cylinders provide dimension and 9 inches (229 mm) to
outstanding service and reliability. the rod removal distance.
Our engineering expertise ensures
that each cylinder provides maximum
performance and reliability with
minimum maintenance cost. Cylinder
materials include cast iron, nodular iron,
cast steel, fabricated carbon or stainless
steel, and forged steel. Most cylinders
are available for either lubricated or
non-lubricated service.
Published by Published by Subject to changes and errors. The information given
Siemens Energy Global GmbH & Co. KG Siemens Energy, Inc. in this document only contains general descriptions
Transformation of Industry Transformation of Industry and/or performance features which may not always
Siemenspromenade 9 4400 N Alafaya Trail specifically reflect those described, or which may
91058 Erlangen Orlando, FL 32826 undergo modification in the course of further
Germany USA development of the products. The requested
performance features are binding only when they are
expressly agreed upon in the concluded contract. All
© Siemens Energy, 2021 product designations may be trademarks or product
Siemens Energy is a trademark licensed by names of Siemens Energy Global GmbH & Co. KG or
Siemens AG. other companies whose use by third parties for their
own purposes could violate the rights of the owners.
