GLOBAL VARSITY EDUCATIONAL CONSULTANCY
Motion (Linear, Circular, Projectile, etc.)
1. A car moves with a uniform acceleration of 2 m/s². If its initial velocity is 10 m/s, what is its velocity after 5 seconds?
A. 15 m/s B. 20 m/s C. 25 m/s D. 30 m/s
2. A ball is thrown vertically upward with a velocity of 20 m/s. How long will it take to reach its maximum height? (Take g
= 10 m/s²) A. 1 s B. 2 s C. 3 s D. 4 s
3. A car starts from rest and accelerates uniformly at 5 m/s² for 4 s. What is the total distance covered? A. 10 m B. 20 m
C. 40 m D. 80 m
4. A stone is projected horizontally from the top of a cliff. Which of the following remains constant during its motion? A.
Horizontal velocity B. Vertical velocity C. Vertical acceleration D. Both A and C
5. A body moves in a circular path with uniform speed. Which of the following is correct? A. The velocity remains
constant B. The acceleration is zero C. The direction of motion changes continuously D. The force on the body is
away from the center
6. A car traveling at 20 m/s is brought to rest in 4 seconds. What is its deceleration? A. 2.5 m/s² B. 5 m/s² C. 10 m/s² D.
20 m/s²
7. A satellite moves in a circular orbit around the Earth. The force responsible for this motion is called ___. A.
gravitational force B. centrifugal force C. frictional force D. magnetic force
8. The acceleration of a body moving in a circular path is called ___. A. linear acceleration B. tangential acceleration C.
centripetal acceleration D. gravitational acceleration
9. A projectile is fired at an angle of 30° with the horizontal. What happens to its horizontal velocity during its flight? A. It
increases B. It decreases C. It remains constant D. It becomes zero at the peak
10. The motion of a simple pendulum is an example of ___. A. linear motion B. oscillatory motion C. rectilinear motion
D. random motion
Work, Energy, and Power
11. The unit of work in the SI system is ___. A. newton B. joule C. watt D. pascal
12. A force of 10 N is used to push a box a distance of 5 m. How much work is done? A. 2 J B. 10 J C. 50 J D. 500 J
13. An object of mass 2 kg is lifted to a height of 10 m. Calculate its potential energy. (Take g = 10 m/s²) A. 20 J B. 100 J C.
200 J D. 500 J
14. The power output of a machine that does 200 J of work in 5 s is ___. A. 20 W B. 40 W C. 50 W D. 100 W
15. A boy of mass 50 kg runs up a staircase of height 5 m in 10 s. What is his power output? (Take g = 10 m/s²) A. 250 W B.
500 W C. 1000 W D. 2000 W
16. The kinetic energy of a body of mass 4 kg moving with a velocity of 5 m/s is ___. A. 10 J B. 20 J C. 50 J D. 100 J
17. Which of the following is NOT a form of energy? A. Chemical B. Nuclear C. Force D. Thermal
18. The work done by a force of 20 N moving an object a distance of 3 m in the direction of the force is ___. A. 10 J B. 20 J
C. 60 J D. 100 J
Units and Measurement
19. The SI unit of length is ___. A. centimeter B. meter C. kilometer D. foot
20. Which of the following is a fundamental quantity? A. Speed B. Time C. Velocity D. Force
21. The SI unit of mass is ___. A. gram B. kilogram C. pound D. tonne
22. What is the derived unit of force? A. Joule B. Pascal C. Newton D. Watt
23. The SI unit of temperature is ___. A. Celsius B. Kelvin C. Fahrenheit D. Joule
24. Which of the following is NOT a unit of energy? A. Joule B. Kilowatt-hour C. Newton D. Erg
25. One meter is equal to ___. A. 10 cm B. 100 cm C. 1000 cm D. 0.1 cm
26. The SI unit of electric current is ___. A. ampere B. volt C. coulomb D. ohm
27. The unit of pressure in the SI system is ___. A. Newton B. Pascal C. Joule D. Watt
28. What is the dimension of work? A. ML²T⁻² B. MLT⁻² C. ML²T⁻³ D. ML²T⁻¹
General Measurement and Application
29. The vernier caliper is more accurate than a meter rule because ___. A. it measures longer distances B. it has higher
precision C. it uses a digital screen D. it measures in inches
30. The smallest measurement that can be read on a micrometer screw gauge is ___. A. 0.01 mm B. 0.1 mm C. 1 mm D.
0.001 mm
