SCORE:
HOLY ANGEL UNIVERSITY
BASIC EDUCATION DEPARTMENT
Senior High School
REMARKS:
FIRST QUARTER
GENERAL PHYSICS 1
NAME Group 3 DATE October 21, 2023
TEACHE Sir Jericho Gonzales
SECTION Abraham
R
ACTIVITY TITLE: Fluid Mechanics
LEARNING TARGETS:
Relate density, specific gravity, mass, and volume to each other
Relate pressure to area and force
Relate pressure to fluid density and depth
Apply Pascal’s principle in analyzing fluids in various systems
Apply the concept of buoyancy and Archimedes’ principle
Apply Bernoulli’s principle and continuity equation, whenever appropriate, to infer relations involving
pressure, elevation, speed, and flux
REFERENCES
BIBLIOGRAPHY David, O. M., & Arevalo, R. L. (2020). DIWA Senior High School Series:General Physics 1 (Second Edition).
4/F SEDCCO 1 Bldg. 120 Thailand corner Legazpi Streets Legaspi Village, 1229 Makati City, Philippine: DIWA
LEARNING SYSTEMS INC.
Solve the following problems. Write your answers on a separate sheet of paper. Show your complete
solutions.
1. What is the volume in m3 of an object with a mass of 23 kg and a density of 17.5 g/cm3?
2. An object has a density of 0.817 x 103 kg/m3. If the density of water is 1.0 x 103 kg/m3,
a. Calculate the specific gravity of the substance.
b. Will the substance since or float?
c. What percentage of the object is submerged in water?
3. A metal bar weighs 3.0 kg. When it is completely submerged in water as it is hanging from a
portable weighing scale, the scale reads 2.46 kg. The density of gold is 19.32 x 103 kg/m3 and water
is 1.0 x 103 kg/m3.
a. What is the buoyant force exerted by the water on the metal?
b. What is the density of the object?
c. Is the metal made of pure gold?
4. A 35-N object has a density of 2.66 x 103 kg/m3. If it is immersed in a fluid with a density of 700
kg/m3,
a. What is the buoyant force exerted by the fluid on the metal?
b. What is the apparent weight of the object?
5. What should be the cross-sectional area of a piston in order to produce a pressure of 150 Pa using
90 N of force?
6. A hydraulic press has a smaller piston which has an area of 50 cm2, while its larger piston has an
area of 3,500 cm2. How much force is produced on the larger piston if 2000 N is applied on the
smaller piston?
7. Consider a water pipe with varying diameters that is lying along a horizontal ground. The speed of
water flowing through the pipe at point A is 2.00 m/s with gauge pressure of 1.00 x 104 Pa. What is
the gauge pressure at another point in the pipeline where the cross-sectional area is 2/3 of point A?
Documentation
GROUP PICTURE (VIDEO CALL OR CONVERSATION)
NAME CONTRIBUTION/S
1) Ambrocio, Reigniel Brien L. Concept Notes, Number 3
2) Apolan, Austine John P. Concept notes, Number 5
3) Caronan, Clarisse B. Concept Notes, Number 4
4) David, Kassandra Irish D. Concept Notes, Number 6
5) Elbanbuena, Christine Joy DC. Concept Notes, Number 7
6) Ingal, Justine Rain D. Concept Notes, Number 2
7) Uchiyama, Joshua Dronz Concept Notes, Number 1
