One-button emergency
rescue device
System Introduction:
This system needs to dial based on an external telephone
line. Provide an external telephone line to connect to this
system. Pre-store 1 to 4 groups of telephones according to
the rules. When the call is triggered, the system will dial 4
groups of telephones in the pre-stored order. When no one
answers the four groups of telephones, the system will
automatically hang up. When the system is in the calling
state or during a call, the system will hang up immediately
if the call button is pressed again.
System configuration:
1. Power supply DC12V connection lead
2. Telephone line connection lead
3. Button lead
Function introduction:
1. Connect the telephone line to the telephone line lead
2. Connect the button lead to a passive normally open
button
3. Connect the power supply, and after the system
starts normally, the system will make a "beep" sound
4. Use any phone to dial the landline number, and wait
for the system to automatically answer the call to enter
the call state. If you need to set the call phone number,
you can directly press the number keys on the phone to
set the number。
For example: The first group is set to: 133 1111, the second group is set to:
133 2222, the third group is set to: 133 3333, the fourth group is set to: 021-
88888888
The operation method is as follows:
(1) Dial the landline number by phone, and press
the keypad number after the system is connected:
*1133 1111# The system will automatically hang
up at this time, indicating that the first group setting
is successful. If the setting is not successful, the
system will not automatically hang up and need to be
re-entered.
(2) Dial the landline number by phone, and press
the keypad number after the system is connected:
*2133 2222# The system will automatically hang
up at this time, indicating that the second group
setting is successful. If the setting is not successful,
the system will not automatically hang up and need
to be re-entered.
(3) Dial the landline number by phone, and press
the keypad number after the system is connected:
*3133 3333# The system will automatically hang
up at this time, indicating that the third group setting
is successful. If the setting is not successful, the
system will not automatically hang up and need to be
re-entered.
(4) Dial the landline number by phone, and press
the*402188888888# The system will automatically
hang up at this time, indicating that the fourth group
setting is successful. If the setting is not successful,
the system will not automatically hang up and need
to be re-entered.
5. After the setting is completed, press the call
button, the system will beep, and then call the first
group of phones. If no one answers the first group of
phones, the system will automatically call the preset
second group of phones, then the third group, and
the fourth group. If no one answers the fourth group,
the system will automatically hang up.
If one of the groups answers the call, the caller in
the car needs to press the call button once to hang
up, otherwise the system will continue to call the
next group of phones。 keypad number after the
system is connected:
