2D BARCODE SCANNER

WIRELESS 2.4GHz + BLUETOOTH + USB

FOR QR CODES AND LINEAR BARCODES

USER MANUAL
HBCS-2DUWB

www.hamletcom.com
Dear Customer,
thanks for choosing an Hamlet product. Please carefully follow the instructions for its use and maintenance and,
once this item has run its life span, we kindly ask You to dispose of it in an environmentally friendly way, by putting
it in the separate bins for electrical/electronic waste, or to bring it back to your retailer who will collect it for free.

We inform You this product is manufactured with materials and components in compliance with RoHS Directive
2011/65/EU & 2015/863/EU, WEEE Directive 2002/96/CE, 2003/108/CE Italian Legislative Decree 2005/151 and
RED Directive 2014/53/EU for the following standards:
EN 300 328 V2.2.2
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 62479: 2010
EN IEC 62368-1: 2020 + A11: 2020

CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.

The complete CE declaration of conformity of the product can be obtained by contacting Hamlet at
[email protected].
Visit www.hamletcom.com for complete information on Hamlet products and to access downloads and technical
support.
Imported by: CARECA ITALIA SPA - Scandiano (RE) . Italy

All trademarks and company names mentioned in this manual are used for description purpose only and remain
property of their respective owners. The material in this document is for information only. Contents, specifications
and appearance of the product are indicative and may change without notice.

LED Devices
Hamlet products using led sources comply with IEC 60825-1, EN 60825-1: 2014. The led classification is marked on
one of the labels on the product. Class 1 Led devices are not considered to be hazardous when used for their
intended purpose.
The following statement is required to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result
in hazardous led light exposure.
Class 2 Led scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the
user should avoid staring directly into the light beam. Momentary exposure to a Class 2 Led is not known to be
harmful.
In accordance with Clause 5, IEC 60825 and EN 60825, the following information is provided to the user:
CLASS 1: CLASS 1 LED PRODUCT
CLASS 2: VISIBLE LED RADIATION - DO NOT STARE INTO BEAM - CLASS 2 LED PRODUCT
Use instructions

All the functions of this barcode scanner are set by scanning the setting barcodes. First, scan

"enter setup mode" barcode, and then scan the function barcode to be set, then scan the

"exit setup mode" barcode after finishing setting. Some common function barcodes can

scan the function barcode directly to complete the setting. This kind of barcode

identification is ★, such as "★ power display".

Enter Setup Mode

Exit Setup Mode

Restore Wireless Parameters

If in use of the process, accidentally scan to other function settings code, which led to the

scanning function can not be usednormally, through the scan initialization barcode to

restore to the initialization state.

Restore Wireless Parameters

Instructions:

This bar code is most likely to be used in the following situations:

1. Error in scanner setting.

2. You forget what settings you made for scanners before, and you don't want to use the

previous settings.

3. Set up the scanner to use some unusual functions, and use after completion.
Setting Custom Default Settings

By setting custom default settings, the default values of wireless parameters of wireless

barcoder can be set to the required functions. First scan the "Enter Settings Mode" bar code,

then scan the required wireless parameter function, and then scan the "Exit Settings Mode"

bar code after the completion of settings. The existing function will replace the original

factory default value after the settings are completed, and the original state will not be

restored even if the settings for restoring wireless parameters are set.

Setting Custom Default Settings

Version

Display version information

Wireless Matching Function Settings

This equipment can complete the wireless pairing operation in accordance with the

following steps, the default factory has good pairing.

Matching with Receiver

1. Pull out the wireless Receiver from the computer.

2. Scan " Enter Setup Mode ".

3. Scanning " Matching with Dongle " enters the matching mode, at which time the scanner

light is extinguished and the code cannot be read.

4. Insert the receiver into the computer USB interface.

5. When you hear "DI", the receiver pair is successful.

6. Scan "Exit Setup Mode"

Communication mode switching

a: Start the scanner and scan the "Enter Setup Mode" bar code

Enter Setup Mode

b: Scanning a Bar Code for a Communication Mode Based on Requirements

2.4G Mode

Virtual Bluetooth Mode

Bluetooth HID Mode

Bluetooth SPP Mode

 Bluetooth BLE Mode
c: Scan the "Exit Setup Mode" bar code and set up the communication mode to complete.

Exit Setup Mode

Shutdown

Users can set bar codes by referring to "automatic sleep time". When users do not need the

scanner to be in working state, they first scan the "Enter Setting Mode" bar code, and then

scan the "Shutdown Instruction" to set bar codes. When the settings are completed, the

scanner will be shut down immediately.

Shutdown
Electric quantity display

When users need to view the current scanner power, they can directly scan the "power

display" set bar code, and view the current scanner power.

★Electric quantity display

Wireless transmission mode

The barcode scanner has two operating modes: Synchronous Mode and storage mode,

through a different set code to operate the mode switch:

a: First scan “Enter setup mode ”barcode

b: Scan the required operating mode barcode

c: Scan “Exit Set mode”barcode to switch the desired mode of operation

Synchronous mode

Scanning "Synchronization Mode" sets bar code, setting bar coder as synchronization mode,

users scan common bar code, that is, sweep-and-pass, and discard it when disconnected.

★Synchronous mode*
Storage mode

Scanning "storage mode" sets bar code, setting bar coder as storage mode, users scan

common bar code, do not upload directly to the computer, data will be stored in the bar

code.

★ Storage mode
Data Control (Data Processing for Storage

Mode)

Data upload

When users need to upload data stored in barcodes to computers or mobile devices,

scanning "data upload" can upload data to computers or mobile devices.

When using data upload, the barcode stored by the original barcoder will not be deleted

unless the data is scanned to clear the barcode.

★data upload

Total data

When users need to count the total amount of data stored in barcodes, scanning "Total

Data" can upload the total amount of data stored in barcoders to computers or mobile

devices.

★Total data
Data clear

When the user needs to clear the data stored in the barcoder, scanning "data clear" can

clear all the data stored in the barcoder.

★data clear
Long press 8 seconds into Bluetooth HID search

When using Bluetooth Barcoder, the Bluetooth configuration connection can be faster when
the HID search of Bluetooth is opened for 8 seconds.
A: Start the scanner and scan the "Enter Setup Mode" bar code

Enter Setup Mode

B: Functional Barcode for Scanning

long press 8 seconds to enter Bluetooth HID search

Close long press 8 seconds to enter Bluetooth HID search

C: Scan the "Exit Setup Mode" bar code and set up the communication mode to complete.

Exit Setup Mode

BarCoder Matching Steps

Computer Matching (2.4 G)

For 2.4G matching steps, support XP, Win7, Win8, Win10, etc.

A: Start the scanner, scan “Enter Setup Mode” barcode

Enter Setup Mode

B: Scan“2.4G Mode”barcode

2.4G Mode

C: Scan the "Matching with Receiver" bar code and enter the pairing state. The blue light on

the left flashes quickly.

Note: At this time, the scanner is in a paired state, and the scanner does not glow when

pressing the key.

Matching with Receiver

D: Insert Dongle (receiver) and hear a "drop" sound, indicating the success of the

connection pairing. The blue indicator on the right is always on.

E: Scan the "Exit Setup Mode" bar code to complete the matching process.

Exit Setup Mode

Bluetooth terminal matching

Using Bluetooth mode, support Android, IOS system or PC terminal with Bluetooth function.

Method 1:

A: Start the bar coder, press the button for 8 seconds, and enter the Bluetooth HID matching

mode. The left and right blue lights flicker alternately.

B: Turn Bluetooth on the device and search for "Barcode Scanner HID".

C: Click on the "Barcode Scanner HID" Bluetooth device to enter the pairing state.

d: Match success "Di" sound, the right blue light is always bright
Method 2：

a: Start the scanner, scan “Enter Setup Mode” barcode

Enter Setup Mode

b: Scan the “Bluetooth HID mode” barcode

Bluetooth HID Mode

c: Scan the “Paired With Dongle” barcode, enter the pair state. The left and right blue

light will flash alternately. ( Or click the button double times to exit setup mode, back to the

scanning state.)

Paired With Dongle

d: Open Bluetooth in the device and search for the Barcode scanner HID

e: Click the Bluetooth device to enter the match status

f: Match success "Di" sound, the right blue light is always bright

g: Scan “Exit Setup Mode” barcode

 Exit Setup Mode

Android, IOS system keyboard settings

(Bluetooth function)

IOS keyboard out or hide（HID Mode）

★Out Or Hide

Double click for out IOS keyboard（Only HID Mode）

★Double click for out IOS keyboard

Double click for close IOS keyboard（Only HID Mode）

★Double Click For Close IOS keyboard

For keyboard display of Android system, please contact the supplier for Bluetooth input

method APP (because of Android system, some mobile phone manufacturers can display

virtual keyboard when connecting Bluetooth scanner)

Transission Speed Setting

a：Start the scanner and scan the "Enter Setup Mode" barcode

Enter Setup Mode

b: Select the desired keyboard language

Fast

Medium

Low

Very Low

c: scan”Exit Setup Mode”barcode

Exit Setup Mode
Set Bluetooth Name

A: start scanning scanner, "enter setup mode" bar code

enter setup mode

B: Scan "Set Bluetooth Name" Barcode

Set Bluetooth Name

C: Scan Bluetooth Name Barcode

Note: The default name of Bluetooth is "Barcode Scanner". After this step is set, the bar

code will be set to the name of Bluetooth.

A) Names can only be set to 16 bytes at most. If the name bar code exceeds 16 bytes, the

first 16 bytes are used as Bluetooth names by the scanner.

B) The complete name of Bluetooth includes: Bluetooth name + protocol type, which only

supports modification of Bluetooth name. After changing the Bluetooth name, the names of

all Bluetooth protocols have changed.

For example, if the Bluetooth name is Scanner, then the Bluetooth HID name is Scanner HID,

the SPP name is Scnaner SPP, and the BLE name is Scanner BLE.
 Sample Bluetooth Name “Scanner“

C: Scan "Exit Setup Mode" bar code, set successfully.

Exit Setup Mode

Read Bluetooth Name

Scanning the "Read Bluetooth Name" bar code will query the Bluetooth name of the

scanner.

Scanning the "Read Bluetooth Name" bar code will query the Bluetooth name of the

scanner.

Read Bluetooth Name

Sound setting

A：Start the scanner and scan into the setup mode barcode

Enter Setup Mode

B: Select the appropriate sound size or frequency to scan according to the needs and set

the bar code

turn sound off

Low volume

Middle volume

High volume *
 Buzzer frequency 2K

Buzzer frequency 2.7K

C: Scan "Exit Settings Mode" bar code, set successfully.

Exit Setup Mode

Vibration setting

a：Start the scanner and scan into the setup mode barcode

Enter Setup Mode

B: Select the bar code that you want to turn on or off the vibration

Turn Off Vibration (optional)

Turn On Vibration (optional)

C: scan”Exit Setup Mode”barcode

Exit Setup Mode

Note: Vibration function is selected for some products.
Sleep time setting

a：Start the scanner and scan into the setup mode barcode

Enter Setup Mode

b: Select the sleep interval bar code

Sleep interval 30s

Sleep interval 1min

Sleep interval 2min

Sleep interval 5min

 Sleep interval 10min

Sleep interval 30min

Never Sleep

Sleep Immediately

c: scan”Exit Setup Mode”barcode

Exit Setup Mode

Language Settings

a：Start the scanner and scan into the setup mode barcode

Enter Setup Mode

b: Select the desired keyboard language

English

Germany

French

Spanish
 Italian

Japanese

Belgian

International general keyboard

c: scan”Exit Setup Mode”barcode

Exit Setup Mode

Note: The international general keyboard supports all PC-side small languages.
Suffix setting

A: Start the scanner and scan the "Enter Setup Mode" bar code

Enter Setup Mode

B: Select the appropriate terminator to scan according to the requirement and set the bar

code. The default is CR.

Add CR*

Add LF

Add CR+LF

Add TAB
 None

C: Scan "Exit Setup Mode" bar code, complete settings

C: Scan "Exit Setup Mode" bar code, complete settings

Case conversion settings

A: Start the scanner and scan the "Enter Setup Mode" bar code

Enter Setup Mode

B: Select the appropriate barcode settings to scan according to the requirements, and do

not convert case to case.

Convert to lowercase

Convert to uppercase

Case interchange

No case conversion *

C: Scan "Exit Setup Mode" bar code, complete settings

Exit Setup Mode
Hidden Character GS Replacement Function

A: Start the scanner and scan the "Enter Setup Mode" bar code

Enter Setup Mode

B: Select the appropriate settings to scan the bar code according to the requirement, and

set whether the GS character bit "|" needs to be replaced.

Open GS character instead of "|"

Close the GS character and replace it with "|"*

C: Scan "Exit Settings Mode" bar code, complete settings

Exit Setup Mode

.
Add prefix and suffix settings

This product supports up to 32 byte prefix and suffix settings.

A: Start the scanner and scan the "Enter Setup Mode" bar code

Enter Setup Mode

B: Select the appropriate bar code to scan according to the requirements, and set the prefix

and suffix to add.

Set prefix

Set suffix

C: Scan "Exit Settings Mode" bar code, complete settings

Exit Setup Mode

Setting the prefix and suffix steps

A: First scan the "Enter Settings Mode" bar code;

B: Scan the "Set Prefix" or "Set Suffix" barcodes;

C: Scanning the barcode corresponding to the characters that need to be added according

to Appendix-Character Table;

C: Scan the "Exit Settings Mode" bar code to complete the settings.

Cancel the prefix and suffix steps

A: First scan the "Enter Settings Mode" bar code;

B: Scan the "Set Prefix" or "Set Suffix" barcodes;

C: Scan the "Exit Settings Mode" bar code to complete the settings.
Hidden Character Settings

This product supports hiding up to four characters before and after

A: Start the scanner and scan the "Enter Setup Mode" bar code

Enter Setup Mode

B: Select the appropriate settings to scan the barcode according to the requirements, and

set the front or back of the hidden barcode.

Hidden Bar Code Front

Hide the back of the bar code

C: Select the appropriate bar code to scan and set the number of hidden characters

according to the requirement

Hide 1 bits
 Hide 2 bits

Hide 3 bits

Hide 4 bits

C: Scan "Exit Settings Mode" bar code, complete settings

Exit Setup Mode

Scan mode

Auto sense mode

Auto sense off *

Auto sense on


Center mode

When the center mode is turned on, the scanner will only

recognize the bar code located in the center area of the picture

facing the scanner lens. This configuration is off by default。

Center mode OFF *

 Center mode ON

Buzzer

Volume

Low

High *
Decoded success beep

OFF

ON *

Decoded success beep voice frequency

voice frequency 1 *

voice frequency 2（ 2.7K）

 voice frequency 3

Decoded success beep duration

Long *c

Short

False warning beep voice frequency

When the data transmission fails, the code scanning gun will

issue four error warning sounds. When it scans an unrecognized

configuration code, the code scanning gun will issue a single

error warning sound.

 Low *

Intermediate

High
Barcode type selection

Trun on / off all barcodes type

Opening all bar code types may result in slower decoding speed.
It is recommended to open the required bar code type according
to the usage scenario. All barcodes are on by default.

Turn on all barcode type *

Turn off all barcode type

Trun on / off all 1D barcodes type

Turn on all 1D barcodes *

 Turn off all 1D barcodes

Trun on / off all 2D barcodes type

Turn on all 2D barcodes *

Turn off all 2D barcodes

Codabar

Enable Codabar
 Disable Codabar

Codabar Start character/end character

Not sending Start character/end character *

Send Start character/end character

Codabar Length limit setting

Codabar Minimum length limit（0~50 bits）

 Codabar Maximum length limit（0~50 bits）

Code 39

Enable Code 39

Disable Code 39

Code 39 check bit

Disable check bit *

Enable but not to send check bit

Send check bit

Code 39 Full ASCII

Turn on Full ASCII

Turn off Full ASCII *

Code 39 Length limit setting

Code 39 Minimum length limit（0~50 bits）

 Code 39 Maximum length limit（0~50 bits）

Code 32 (code39 needs to be turned on)

Enable Code 32

Disable Code 32

Interleaved 2 of 5（ITF25）

Enable ITF25
 Disable ITF25

Interleaved 2 of 5（ITF25）check bit

Disable check bit *

Enable but not to send check bit

Send check bit

Interleaved 2 of 5（ITF25）length selection

ITF25 random lengths（6-50 bits）*

ITF25 6 bits length

ITF25 8 bits length

ITF25 10 bits length

ITF25 12 bits length

 ITF25 14 bits length

ITF25 16 bits length

ITF25 18 bits length

ITF25 20 bits length

ITF25 22 bits length

 ITF25 24 bits length

Interleaved 2 of 5 Length limit setting

Interleaved 2 of 5 Minimum length limit（0~50 bits）

Interleaved 2 of 5 Maximum length limit（0~50 bits）

Industrial 2 of 5（Industrial 2 of 5）

Enable Industrial 2 of 5
 Disable Industrial 2 of 5

Industrial 2 of 5 Length limit setting

Industrial 2 of 5 Minimum length limit（0~50 bits）

Industrial 2 of 5 Maximum length limit（0~50 bits）

Matrix 2 of 5（Matrix 2 of 5）（4-24 bits）

Enable Matrix 2 of 5
 Disable Matrix 2 of 5

Matrix 2 of 5 Length limit setting

Matrix 2 of 5 Minimum length limit（0~50 bits）

Matrix 2 of 5 Maximum length limit（0~50 bits）

Code 93

Enable Code 93
 Disable Code 93

Code 93 Length limit setting

Code 93 Minimum length limit（0~50 bits）

Code 93 Maximum length limit（0~50 bits）

Code 11

Enable Code 11
 Diable Code 11 *

Code 11 Check bit output

Send check bit

Not to send check bit *

Code 11 check bit selection

Disable check bit *

Code 11 1 bit

Code 11 2 bits

Code 11 Length limit setting

Code 11 Minimum length limit（0~50 bits）

 Code 11 Maximum length limit（0~50 bits）

Code 128

Enable Code 128

Disable Code 128

ISBT-128

Enable ISBT 128

Disable ISBT 128

GS1-128

Enable GS1-128

Disable GS1-128

GS1-128 Length limit setting

GS1-128 Minimum length limit（0~50 bits）

GS1-128 Maximum length limit（0~50 bits）

UPC-A

Enable UPC-A

Disable UPC-A

UPC-A check bit

Send check bit *

Not to send check bit

UPC-A convert to EAN-13

 Enable UPC-A convert to EAN-13

Disable UPC-A convert to EAN-13 *

UPC-E

Enable UPC-E

Disable UPC-E
UPC-E check bit

Send check bit *

Not to send check bit

UPC-E extend to UPC-A

Enable UPC-E extend to UPC-A

Disable UPC-E extend to UPC-A *

EAN/JAN-8

Enable EAN/JAN-8
 Disable EAN/JAN-8

EAN/JAN-13

Enable EAN/JAN-13

Disable EAN/JAN-13

UPC/EAN/JAN extracode

Ignore UPC/EAN/JAN extracode *

 Decode UPC/EAN/JAN extracode

Adapt UPC/EAN/JAN extracode

EAN13 convert to ISBN

Enable EAN13 convert to ISBN code

Disable EAN13 convert to ISBN code *

EAN13 convert to ISSN

Enable EAN13 convert to ISSN code

Disable EAN13 convert to ISSN code *

GS1 DataBar（RSS14）

Enable GS1 DataBar

Disabel GS1 DataBar

GS1 DataBar Limited

Enable GS1 DataBar Limited

Disable GS1 DataBar Limited

GS1 DataBar Expanded

Enable GS1 DataBar Expanded

Disable GS1 DataBar Expanded

MSI code

Enable MSI code

Disable MSI code

MSI check bit output

Send MSI code check bit

Not to send MSI code check bit

MSI check bit selection

1 bit

2 bits
MSI code 2 bits check bit selection

MOD10/MOD10

MOD10/MOD11

MSI code length limit setting

MSI code minimum length

MSI code Maximum Length

Febraban（ Brazil bank document barcode）

Note: Please turn off the AIM ID function before enable the Frabraban function.
Febraban（ITF25）

Enable Febraban（ITF25）

Disable Febraban（ITF25）（Factory default）

Febraban（CODE128）

Enable Febraban（CODE128）

Febraban（CODE128）（Factory default）

Febraban parity

Enable Febraban parity

Disable Febraban parity（Factory default）

PDF417

Enable PDF417

Disable PDF417

Micro PDF417

Enable Micro PDF417

Disable Micro PDF417

QR Code

Enable QR

Disable QR

Micro QR

Enable Micro QR

Disable Micro QR
Data Matrix

Enable Data Matrix

Disable Data Matrix

Aztec Code

Enable Aztec

Disable Aztec
Appendix -Led&Buzzer state description

LED Light Description

Left blue LED 1 Flash briefly if scanning

Right blue LED 2 successfully Wireless connection

Red LED Charging

Blue 2 off, blue 1 Flash quickly 2.4G pairing mode

Blue 1 off, Blue 2 Flash quickly SPP pairing mode

Blue 1 and Blue2 alternately flash HID pairing mode

Blue 1 and Blue 2 Synchronize flash quickly BLE pairing mode

Appendix - buzzer prompt sound

Buzzer Description

A long Sound Power ON/OFF

A short sound(low frequency) Scan common barcode, or paired, wireless

connection success

3 short sound(low frequency) Wireless transmission failor buffer full

5 short sound(low frequency) and stop Battery without electricity

scanning

2 short sound(low frequency) Wireless disconnection

2 short sound(high frequency) Setup code scanning is not work

Note: The lighting instructions in this section vary slightly according to different product

configurations. If you need to know more, you can contact the supplier.
Appendix - Character List

Serial character 1D Setup Code 2D Setup Code

number

1 SOH

2 ^B

3 ^C

4 EOT

5 ENQ

6 ACK

7 BEL
8 Back Space

9 Tab

10 LF

11 VT

12 FF

13 CR

14 F1

15 F2
16 F3

17 F4

18 F5

19 F6

20 F7

21 F8

22 F9

23 F10
24 F11

25 F12

26 SUB

27 Esc

28 Right Arrow

29 Left Arrow

30 Up Arrow

Down
31
Arrow
32 空格

33 !

34 "

35 #

36 $

37 %

38 &

39 '
40 (

41 )

42 *

43 +

44 ,

45 -

46 .

47 /
48 0

49 1

50 2

51 3

52 4

53 5

54 6

55 7
56 8

57 9

58 :

59 ;

60 <

61 =

62 >

63 ?
64 @

65 A

66 B

67 C

68 D

69 E

70 F

71 G
72 H

73 I

74 J

75 K

76 L

77 M

78 N

79 O
80 P

81 Q

82 R

83 S

84 T

85 U

86 V

87 W
88 X

89 Y

90 Z

91 [

92 \

93 ]

94 ^

95 _
96 `

97 a

98 b

99 c

100 d

101 e

102 f

103 g
104 h

105 i

106 j

107 k

108 l

109 m

110 n

111 o
112 p

113 q

114 r

115 s

116 t

117 u

118 v

119 w
120 x

121 y

122 z

123 {

124 |

125 }

126 ~

127 DEL
Appendix -Common Questions

1. What to do if can not connected to Bluetooth?

Make sure the phone is android 3.0 or above, it can be connected directly

2. Why part of the bar code can not scan?

Factory default settings are closed due to some of bar code is not commonly used. It can

normally scan if you just open the corresponding bar code settings . If you do not know the

corresponding bar code type, please contact the manufacturer

3. Why barcodes can not be uploaded to a computer or phone?

A.Make sure barcode scanner has been successfully matched.If yes,LED

display is blue

B.Pls check whether inventory function is opened. (In inventory mode, bar code will not

automatically upload, you need to manually scan the corresponding bar code to upload)

C. Change to normal mode, you can scan while uploading

4. How to do if computer or mobile phone can not find the Bluetooth scanner ?

To confirm whether the selected communication mode is Bluetooth HID mode. If it is other

communication mode, pls contact the supplier for relevant testing tools.

5. Bluetooth scanner has been connected with the phone or computer before, how how

to pair with the phone or computer pair again?

Select the paired Bluetooth in the Bluetooth search interface , and then search connection

and pair again.

6.How to do if unable to automatically connect after Re-plug the Bluetooth adapter or

restart the phone?

In case of that if the computer or mobile phone is not connected with other Bluetooth

devices or scanning equipment and other computers or mobile phones simply re-start the

Bluetooth scanner and it can be automatically connected.

7. Why unable to connect after switch to other communication mode?

Remove the paired Bluetooth device after switching mode andthen re-connect the pairing

to connect the device.

8. How to change more scan settings？

Please contact the supplier directly