GP200
General-Purpose Silicone Sealant for
Multi-Use Applications
Technical Data Sheet
CLASS
TRADE SILICONE RANGE EN15651-1,3; F EXT-INT; S1
Description:
Multi‐purpose, high modulus, acetoxy cure silicone sealant with fungicide, suitable for most sealing jobs around
the home. Conforms to BS EN 15651‐1,3:2012.
Features & Benefits: WHITE SPIRIT or MULTI-WIPES prior to curing taking place.
w Contains fungicide.
Maintenance
w Mould resistant.
Resistant to all common household cleaning chemicals. In showers
w Fast setting. and bathrooms best results are obtained with a weekly clean to
w For interior and exterior use. prevent organic build up. Stains can be removed with commercial
w Permanently flexible. bleach.
Uses Coverage
Bond It GP200 is suitable for sealing and waterproofing in areas of Depending upon substrate condition and porosity approximately
high humidity. It has excellent adhesion to glass, glazed surfaces, 10 linear metres with a 6mm bead per cartridge.
ceramic tiles, many plastics and most paints.
It is ideal for the following applications - kitchen work tops, Colour
bathrooms, showers, utility rooms and general DIY applications. GP200 comes in 5 colours: white, black, translucent, grey and
brown.
Limitations
Where bare ferrous metals, brass copper, lead, aluminium or zinc Size
cannot be primed, use Bond It ULTI-MATE silicone sealant. Do not EU3 plastic cartridge.
use on surfaces where water can penetrate through porous
materials to bond interface without first carrying out remedial Shelf Life
work. Not suitable for fixing of mirrors or sealing natural marble. Minimum 12 months from date of manufacture when stored in
Notsuitable for use on bitumen or asphalt. White and trans may original, unopened cartridges.
yellow in colour over time if exposed to direct sunlight.
Storage Conditions
Preparation Store in cool, dry conditions at a temperature between +5oC and
Ensure all surfaces are clean, dry and free from grease or +25oC. Protect from frost and direct sunlight.
any contaminants that may hinder adhesion. For best
results on movement joints, Bond It EXPANDING FOAM is Disposal of Containers
recommended as a backing material, or a suitable backing Do not leave empty containers where residue could be harmful to
tape or rod. All cements, concretes and bare metal surfaces children, animals or the environment. Remove any containers to a
should be primed prior to the application of the silicone. central disposal point in accordance with local regulations.
Timber should be primed and painted.
Health & Safety
Application Please refer to separate safety data sheet (SDS) for full handling,
Apply using a standard sealant gun with the use and storage instructions. Keep out of reach of children.
nozzle cut at an angle of 45°, and to an It is the user’s responsibility to determine suitability for
opening slightly larger than the joint to be use. If in doubt, contact our Technical Department for
sealed. Tool using a stick, plastic spatula or advice.
Bond It SEALANT APPLICATOR TOOL wetted with Note: this information is for general guidance only, since site
soapy water. Do not apply to wet surfaces, although conditions and labour are beyond our control.
wetting immediately afterwards will not have any
adverse effects. Tools can be cleaned in Bond It
Specification Summary
Tooling Time 5-10 minutes
Skin Time Less than 30 minutes
23 23
Cure Time 1-2mm per day
Application Temperature +5oC to +30oC BOND IT
H4 Premier Way, Elland. HX5 9HF. UK
Service Temperature -40oC to +100oC
EN15651-1,3:2012
Tensile Strength 1.11N/mm 2 F EXT- INT, S1
DoP: BDSV DoP: BDSV
Elongation At Break 150% UV Resistance NB: 2538 NB: 0757
Façade sealant for exterior and interior use.
UV Resistance Excellent
Sanitary Sealant.
Ozone Resistance Excellent
Reaction to fire E
Density 0.95g/cm3 Release of chemicals None
Elastic Recovery >70%
Commodity Code 3214101010
Resistance to flow < 3mm
Loss of volume NPD
Product / Order Details
Adhesion / cohesion after
water immersion >25%
Code Colour Fill Barcode UFI
Adhesion / cohesion at
BDSVBR Brown 275ml 5060021361493 V480-E086-X00Y-W6ER maintained extension NF
Adhesion / cohesion at
BDSVWH White 275ml 5060021361516 V480-E086-X00Y-W6ER variable tmperature NF
BDSVT Translucent 275ml 5060021361509 V480-E086-X00Y-W6ER Secant Modulus @ +23oC <0.4N/mm2
Secant Modulus @ -20oC <0.6N/mm2
BDSVBL Black 275ml 5060021368188 V480-E086-X00Y-W6ER
Tensile properties at
BDSVGY Grey 275ml 5056437402189 V480-E086-X00Y-W6ER maintained extension NF
Durability Pass
Microbiological growth S1
Note: The data presented in this leaflet
is in accordance with the present state
of our knowledge, but does not absolve
the user from carefully checking all
supplies immediately on receipt.
We reserve the right to alter product
constants within the scope of technical
progress or new developments. The
recommendations made in this leaflet
should be checked by preliminary
trials because of conditions during
processing over which we have
no control, especially where other
companies raw materials are also being
used. The recommendations do not
absolve the user from the obligation
of investigating the possibility of
infringement of third parties rights and,
if necessary clarifying the
position. Recommendations for use
do not constitute a warranty, either
expressed or implied,
of the fitness or
suitability of the
products for a
particular purpose.
Part of the Bond It Silicone & Sealants Range Version 8: 15/03/24
Supercedes V7 10/10/22
Head Office: Unit H4, Premier Way, Lowfields Business Park, Elland, West Yorkshire. HX5 9HF.
Telephone: +44 (0)1422 315300 Email: salesuk@[Link]
EU Office: SISL (Bond It) Ireland Limited, 70 Sir John Rogerson’s Quay, Dublin 2. Tel: +353 1 960 9411
Website: [Link]
