5610D/5620D
TYPE 5610D/5620D
Universal Cartridge Wet/Dry Running Seal
A – Seat/Mating Ring
B – Face/Primary Ring
C – Spring
D – Retainer
D
C
5620D shown
Product Description Performance Capabilities
The specially engineered, fully interchangeable wet/dry ■ Temperature:
running seal head extends the functionality of the 5600 -30°C to 205°C/-20°F to 400°F
product line for standard ANSI and large bore pumps. ■ Pressure:
The exact combination of face loading and material 5610D:Dry Running - 0.7 bar g/10 psig max.
selection incorporated into this optimized design permits Wet Running - 10.5 bar g/150 psig max.
operation in both wet and dry conditions.
5620D:Dry Running - 0.7 bar g/10 psig max.
The Type 5610D is a single cartridge using the special Containment 24mm - 75mm/1.000" - 3.000"
O-ring pusher wet/dry running seal head.
- 21 bar g/300 psig max.
The Type 5620D is a dual cartridge arrangement having a Containment 80mm - 100mm/3.125" - 4.000"
standard Type 5600 seal inboard and the special O-ring - 14 bar g/200 psig max.
pusher dry running containment seal outboard.
■ Size Range:
For shaft sizes from 24mm - 100mm/1.000" - 4.000"
Design Features ■ Speed:
Type 5610D: Up to 25 m/s / 5000 fpm
■ Wet/dry running capabilities for batch operations and
■ End Play/Axial Float Allowance:
unloading duties. 0.13mm/0.005"
■ Retrofits existing 5600 seal heads.
■ Runout/Out of Squareness:
0.05mm/0.002"
Type 5620D: Typical Applications
■ Provides the safety of dual seal without an external ■ Chemical ■ Light Hydrocarbons
lubrication system.
■ Caustics ■ Unloading Pumps
■ Retrofits existing liquid lubricated 5600 outboard seal
heads. ■ Aqueous Solutions ■ Batch Operations
■ May be used as a quench seal. ■ Crystallizing Fluids
TYPE 5610D/5620D
Universal Cartridge Wet/Dry Running Seal
Type 5610D Wet/Dry Running Seal Head
Type 5620D C
A – Primary Ring - Enables Up To 6mm/1/4" Wear
B – Seal Head Interchangeable With Standard 5600 Seal Heads
C – Low Load Coil Springs Accurately Compensate For Up To
6mm/1/4" Primary Ring Wear
Materials of Construction
SEAL COMPONENTS MATERIALS
Description Standard Options
Primary Ring Premium Carbon —
Mating Ring Sintered Silicon Carbide —
Spring Alloy C-276 —
Retainer 316 Stainless Steel Alloy 20CB3 SS
Disc Alloy C-276
Titanium
O-Ring Fluoroelastomer Buna-N
Ethylene Propylene Neoprene
Perfluoroelastomer
Notes: 1. Materials of construction pertain to the wet/dry running seal head only.
2. Consult the 5610 & 5620 data sheet for material options of other seal components.
3. For secondary containment arrangement, refer to drawing DSK-11722 for recommended piping schematic.
Europe North America Latin America Middle East & Africa
Slough, UK Morton Grove São Paulo, Brazil Dubai, United Arab Emirates
Tel: 44-1753-224000 Tel: 1-847-967-2400 Tel: 55-11-3371-2500 Tel: 971-4-3438940
Fax: 44-1753-224224 Fax: 1-847-967-3915 Fax: 55-11-3371-2599 Fax: 971-4-3438970
Houston Asia
Tel: 1-713-944-6690 Singapore
Fax: 1-713-946-8252 Tel: 65-6512-5200
Fax: 65-6512-5233
For your nearest John Crane facility, please contact one of the locations above.
If the products featured will be used in a potentially dangerous and/or hazardous process, your John Crane representative should be consulted prior to their selection and use.
In the interest of continuous development, John Crane Companies reserve the right to alter designs and specifications without prior notice. It is dangerous to smoke while handling
products made from PTFE. Old and new PTFE products must not be incinerated.
©2006 John Crane Inc. Print 05/06 [Link] ISO 9001, ISO 14001, ISO/TS 16949 Certified S-5610D/5620D
