Please take note, SCB machine currently are using two type of EPP for both ATM and
CDM which are:
1) EPP V6 (PC1500xe USB and PC4000)
2) EPP J6.1 (PC280N RP3 and CINEO4060)
There are differences procedures to enter the TMK as below.
Procedure if change new EPP
If you are require to change the EPP, Please make sure you are replacing the correct EPP type and refer below procedure for key in Terminal Master Key (TMK)
or known as A key B Key:
To key in TMK for EPP v6 To key in TMK for EPP J6.1
1) Replaced EPP 1) Replaced EPP
2) Collect 2 envelope/slips that consist of two TMK components 2) Collect 2 envelope/slips that consist of two TMK components
of 32 characters each from branch officer. of 32 characters each from branch officer.
3) Please ensure the sequence number on top right slips are 3) Please ensure the sequence number on top right slips are
match, otherwise please request for other set. match, otherwise please request for other set.
4) From SOP, go to 06 Access then select 08 Enter SKE A. Key in 4) From SOP, go to 06 Access then select function 10 CHG PWD
both components until get the final Verify Key. OP1, change old password from 000000 to 111111. After that
- For info, go to function 11 CHG PWD OP2, change old password from
To key in alphabet A – F, press once Blank key in 000000 to 111111.
between Correction Key and Enter Key then follow with 5) Then back to 06 Access then select 08 Enter SKE A. Key in
Number Key 1 – 6 (1 = A, 2=B, 3=C, 4=D, 5=E, 6=F) For both components until gets the final Verify Key. Please use
Example: new password that has been changed earlier on function 10
For A (press once BLANK key then press no. 1 key) and 11. (111111).
- For info,
For B (press once BLANK key then press no. 2 key) To key in alphabet A – F, press and Hold *(left hand side
5) Once get the verify key, please call DN SCB MS team (03- button 0) then follow with Number Key 1 – 6 (1 = A,
62096221/6222/6223/6224) and ask to connect with Euronet 2=B, 3=C, 4=D, 5=E, 6=F) For Example:
to check the verify key and load the full CI. During the
For A (press and Hold * key then press no. 1 key)
process, you are requiring to provide Euronet with Sequence
Number and verify key. For B (press and Hold * key then press no. 2 key)
6) Please follow instruction Euronet personel. Once machine 6) Once get the verify key, please call DN SCB MS team (03-
up please perform normal transaction otherwise please call 62096221/6222/6223/6224) and ask to connect with Euronet
SCB Account specialist. to check the verify key and load the full CI. During the
process, you are requiring to provide Euronet with Sequence
Number and verify key.
7) Please follow instruction Euronet personel. Once machine
up please perform normal transaction otherwise please call
SCB Account specialist.
Procedure if require to refresh TMK (Enter new TMK)
If you been assigning to Refresh TMK, please follow below instruction:
To key in TMK for EPP v6 To key in TMK for EPP J6.1
1) Collect 2 envelope/slips that consist of two TMK 1) Collect 2 envelope/slips that consist of two TMK components
components of 32 characters each from branch officer. of 32 characters each from branch officer.
2) Please ensure the sequence number on top right slips 2) Please ensure the sequence number on top right slips are
are match, otherwise please request for other set. match, otherwise please request for other set.
3) Please initialize EPP from SOP by go to 50 Vendor Menu then
3) Please initialize EPP from SOP by go to 50 Vendor Menu
02 Init EPP.
then 02 Init EPP.
4) Next go to 06 Access then select 08 Enter SKE A. Key in both
4) Next from SOP, go to 06 Access then select 08 Enter SKE components until gets the final Verify Key. Please use
A. Key in both components until get the final Verify Key. password 111111 for both component OP1 and OP2.
- For info, - For info,
To key in alphabet A – F, press once Blank key in To key in alphabet A – F, press and Hold *(left hand side
between Correction Key and Enter Key then follow button 0) then follow with Number Key 1 – 6 (1 = A,
with Number Key 1 – 6 (1 = A, 2=B, 3=C, 4=D, 5=E, 2=B, 3=C, 4=D, 5=E, 6=F) For Example:
6=F) For Example: For A (press and Hold * key then press no. 1 key)
For A (press once BLANK key then press no. 1 key) For B (press and Hold * key then press no. 2 key)
For B (press once BLANK key then press no. 2 key)
5) Once get the verify key, please call DN SCB MS team 5) Once get the verify key, please call DN SCB MS team (03-
(03-62096221/6222/6223/6224) and ask to connect 62096221/6222/6223/6224) and ask to connect with Euronet
with Euronet to check the verify key and load the full CI. to check the verify key and load the full CI. During the
During the process, you are requiring to provide Euronet process, you are requiring to provide Euronet with Sequence
with Sequence Number and verify key. Number and verify key.
6) Please follow instruction Euronet personel. Once 6) Please follow instruction by Euronet personnel. Once
machine up please perform normal transaction (Bal Enquiry)
machine up please perform normal transaction
otherwise please call SCB Account specialist.
otherwise please call SCB Account specialist.
