Safety Data Sheet

Hazardous, NON-Dangerous Goods

1. MATERIAL AND SUPPLY COMPANY IDENTIFICATION

Product name: PROSIL 10

Synonyms Product Code Bar Code
Prosil 10 Almond Ivory 102170
Prosil 10 Aluminium 102166
Prosil 10 Black 300ml 102168
Prosil 10 Black Sausage 102179
Prosil 10 Brown 102173
Prosil 10 Classic Cream 102164
Prosil 10 Ivory 102175
Prosil 10 L/Grey Sausage 102178
Prosil 10 Light Grey 300ml 102162
Prosil 10 Mist Green 102172
Prosil 10 Off White 300ml 102169
Prosil 10 Stone Beige 102165
Prosil 10 Trans Sausage 600ml 102180
Prosil 10 Translucent 300ml 102167
Prosil 10 White 300ml 102163
Prosil 10 Woodland Grey 102171
Prosil Aluminium Sausage 102368
Prosil 10PN Stone Beige 102369
Prosil 10PN Translucent 102370
Prosil 10 Stone Beige 102630

Recommended use: General purpose silicone sealant

Supplier: Admil, a division of DuluxGroup (Australia) Pty Ltd

ABN: 67 000 049 427
Street Address: 1956 Dandenong Road
Clayton VIC 3168
Australia
Telephone: Australia - 1800 810 114

Emergency Telephone number: Australia – 1800 220 770; New Zealand – 0800 220 770

2. HAZARDS IDENTIFICATION

This material is hazardous according to health criteria of Safe Work Australia.

Signal Word
Warning

Hazard Classifications
Eye Damage/Irritation - Category 2A
Sensitisation - Skin - Category 1

Hazard Statements
H317 May cause an allergic skin reaction.

Product Name: PROSIL 10 Reference No: SELGHSEN000875

Issued: 28 October 2019 Version: 7.4 Page 1 of 7
 Safety Data Sheet
H319 Causes serious eye irritation.

Prevention Precautionary Statements

P102 Keep out of reach of children.
P103 Read carefully and follow all instructions.
P261 Avoid breathing dust, fume, gas, mist, vapours or spray..
P264 Wash hands, face and all exposed skin thoroughly after handling.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves/protective clothing protective clothing, gloves, eye/face
protection and suitable respirator.

Response Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P302+P352 IF ON SKIN: Wash with plenty of water .
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.

Storage Precautionary Statement

Not allocated

Disposal Precautionary Statement

P501 Dispose of contents/container in accordance with local, regional, national and
international regulations.

Poison Schedule: Not Applicable

DANGEROUS GOOD CLASSIFICATION

Not classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods
by Road & Rail" and the "New Zealand NZS5433: Transport of Dangerous Goods on Land".

3. COMPOSITION INFORMATION

CHEMICAL ENTITY CAS NO PROPORTION

2-Butanone, O,O',O''-(methylsilylidyne)trioxime 22984-54-9 1 - 10 % (w/w)

2-Butanone, O,O',O''-(ethenylsilylidyne)trioxime 2224-33-1 <1 % (w/w)
Cyclotetrasiloxane, octamethyl- 556-67-2 <1 % (w/w)
Methyl ethyl ketoxime 96-29-7 <1 % (w/w)
N-[3-(Trimethoxysilyl)propyl]ethylenediamine 1760-24-3 <1 % (w/w)
Ingredients determined to be non-hazardous or below reporting limits Balance
____________
100%

4. FIRST AID MEASURES

If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 131 126, New Zealand 0800
764 766).

Inhalation: Remove victim from exposure - avoid becoming a casualty. Remove contaminated clothing and
loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until
fully recovered. Seek medical advice if effects persist.

Skin Contact: Effects may be delayed. If skin or hair contact occurs, remove contaminated clothing and flush
skin and hair with running water. If swelling, redness, blistering or irritation occurs seek medical assistance.

Product Name: PROSIL 10 Reference No: SELGHSEN000875

Issued: 28 October 2019 Version: 7.4 Page 2 of 7
 Safety Data Sheet
Eye contact: If in eyes, hold eyelids apart and flush the eyes continuously with running water. Continue flushing
until advised to stop by the Poisons Information Centre or a Doctor; or for at least 15 minutes and transport to
Doctor or Hospital.

Ingestion: Rinse mouth with water. If swallowed, do NOT induce vomiting. Give a glass of water to drink.
Never give anything by the mouth to an unconscious patient. If vomiting occurs give further water. Seek medical
advice.

PPE for First Aiders: Wear safety shoes, overalls, gloves, safety glasses. Available information suggests that
gloves made from nitrile rubber should be suitable for intermittent contact. However, due to variations in glove
construction and local conditions, the user should make a final assessment. Always wash hands before smoking,
eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storing or
re-using.

Notes to physician: Treat symptomatically. Effects may be delayed.

5. FIRE FIGHTING MEASURES

Hazchem Code: Not applicable.

Suitable extinguishing media: If material is involved in a fire use water fog (or if unavailable fine water spray),
alcohol resistant foam, standard foam, dry agent (carbon dioxide, dry chemical powder).

Specific hazards: Combustible material.

Fire fighting further advice: On burning or decomposing may emit toxic fumes. Fire fighters to wear self-
contained breathing apparatus and suitable protective clothing if risk of exposure to vapour or products of
combustion or decomposition.

6. ACCIDENTAL RELEASE MEASURES

SMALL SPILLS
Wear protective equipment to prevent skin and eye contamination. Avoid inhalation of vapours or dust. Wipe up
with absorbent (clean rag or paper towels). Collect and seal in properly labelled containers or drums for disposal.

LARGE SPILLS
Clear area of all unprotected personnel. Slippery when spilt. Avoid accidents, clean up immediately. Wear
protective equipment to prevent skin and eye contamination and the inhalation of vapours. Work up wind or
increase ventilation. Contain - prevent run off into drains and waterways. Use absorbent (soil, sand or other inert
material). Collect and seal in properly labelled containers or drums for disposal. If contamination of crops,
sewers or waterways has occurred advise local emergency services.

Dangerous Goods - Initial Emergency Response Guide No: Not applicable

7. HANDLING AND STORAGE

Handling: Avoid eye contact and skin contact. Avoid inhalation of vapour, mist or aerosols.

Storage: Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from foodstuffs. Store
away from incompatible materials described in Section 10. Store away from sources of heat and/or ignition.
Keep container standing upright. Keep containers closed when not in use - check regularly for leaks.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Product Name: PROSIL 10 Reference No: SELGHSEN000875

Issued: 28 October 2019 Version: 7.4 Page 3 of 7
 Safety Data Sheet
National occupational exposure limits: No value assigned for this specific material by Safe Work Australia.

Biological Limit Values: As per the "National Model Regulations for the Control of Workplace Hazardous
Substances (Safe Work Australia)" the ingredients in this material do not have a Biological Limit Allocated.

Engineering Measures: Natural ventilation should be adequate under normal use conditions.

Personal Protection Equipment: SAFETY SHOES, OVERALLS, GLOVES, SAFETY GLASSES.

Wear safety shoes, overalls, gloves, safety glasses. Available information suggests that gloves made from nitrile
rubber should be suitable for intermittent contact. However, due to variations in glove construction and local
conditions, the user should make a final assessment. Always wash hands before smoking, eating, drinking or
using the toilet. Wash contaminated clothing and other protective equipment before storing or re-using.

Hygiene measures: Keep away from food, drink and animal feeding stuffs. When using do not eat, drink or
smoke. Wash hands prior to eating, drinking or smoking. Avoid contact with clothing. Avoid eye contact and skin
contact. Avoid inhalation of vapour, mist or aerosols. Ensure that eyewash stations and safety showers are close
to the workstation location.

9. PHYSICAL AND CHEMICAL PROPERTIES

Form: Liquid
Colour: Various
Odour: Characteristic

Solubility: Insoluble in water

Specific Gravity: 1.03
Relative Vapour Density (air=1): >1
Vapour Pressure (20 °C): N Av
Flash Point (°C): 96 (CC)
Flammability Limits (%): N App
Autoignition Temperature (°C): N Av
Melting Point/Range (°C): N Av
Boiling Point/Range (°C): N Av
pH: N App
Viscosity: N Av
Total VOC (g/Litre): N Av

(Typical values only - consult specification sheet)

N Av = Not available, N App = Not applicable

10. STABILITY AND REACTIVITY

Chemical stability: This material is thermally stable when stored and used as directed.

Conditions to avoid: Elevated temperatures and sources of ignition.

Incompatible materials: Oxidising agents.

Hazardous decomposition products: Oxides of carbon and nitrogen, smoke and other toxic fumes.

Hazardous reactions: No known hazardous reactions.

11. TOXICOLOGICAL INFORMATION

No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the
product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs are:
Product Name: PROSIL 10 Reference No: SELGHSEN000875
Issued: 28 October 2019 Version: 7.4 Page 4 of 7
 Safety Data Sheet
Acute Effects

Inhalation: Material may be an irritant to mucous membranes and respiratory tract.

Skin contact: Contact with skin may result in irritation. A skin sensitiser. Repeated or prolonged skin contact
may lead to allergic contact dermatitis.

Ingestion: Swallowing can result in nausea, vomiting and irritation of the gastrointestinal tract.

Eye contact: An eye irritant.

Acute toxicity

Inhalation: This material has been classified as non-hazardous. Acute toxicity estimate (based on ingredients):
LC50 > 20.0 mg/L for vapours or LC50 > 5.0 mg/L for dust and mist or LC50 > 20,000 ppm for gas

Skin contact: This material has been classified as non-hazardous. Acute toxicity estimate (based on
ingredients): >2,000 mg/Kg bw

Ingestion: This material has been classified as non-hazardous. Acute toxicity estimate (based on ingredients):
>2,000 mg/Kg bw

Corrosion/Irritancy: Eye: this material has been classified as not corrosive or irritating to eyes. Skin: this
material has been classified as not corrosive or irritating to skin.

Sensitisation: Inhalation: this material has been classified as not a respiratory sensitiser. Skin: this material has
been classified as a Category 1 Hazard (skin sensitiser).

Aspiration hazard: This material has been classified as non-hazardous.

Specific target organ toxicity (single exposure): This material has been classified as non-hazardous.

Chronic Toxicity

Mutagenicity: This material has been classified as non-hazardous.

Carcinogenicity: This material has been classified as non-hazardous.

Reproductive toxicity (including via lactation): This material has been classified as non-hazardous.

Specific target organ toxicity (repeat exposure): This material has been classified as non-hazardous.

12. ECOLOGICAL INFORMATION

Avoid contaminating waterways.

Acute aquatic hazard: This material has been classified as non-hazardous. Acute toxicity estimate (based on
ingredients): >100 mg/L

Long-term aquatic hazard: This material has been classified as non-hazardous. Non-rapidly or rapidly
degradable substance for which there are adequate chronic toxicity data available OR in the absence of chronic
toxicity data, Acute toxicity estimate (based on ingredients): >100 mg/L, where the substance is not rapidly
degradable and/or BCF < 500 and/or log Kow < 4.

Ecotoxicity: No information available.

Persistence and degradability: No information available.

Bioaccumulative potential: No information available.

Product Name: PROSIL 10 Reference No: SELGHSEN000875

Issued: 28 October 2019 Version: 7.4 Page 5 of 7
 Safety Data Sheet
Mobility: No information available.

13. DISPOSAL CONSIDERATIONS

Persons conducting disposal, recycling or reclamation activities should ensure that appropriate personal
protection equipment is used, see "Section 8. Exposure Controls and Personal Protection" of this SDS.

If possible material and its container should be recycled. If material or container cannot be recycled, dispose in
accordance with local, regional, national and international Regulations.

14. TRANSPORT INFORMATION

ROAD AND RAIL TRANSPORT

Not classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods
by Road & Rail" and the "New Zealand NZS5433: Transport of Dangerous Goods on Land".

MARINE TRANSPORT
Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG
Code) for transport by sea.

AIR TRANSPORT
Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous
Goods Regulations for transport by air.

15. REGULATORY INFORMATION

This material is not subject to the following international agreements:

Montreal Protocol (Ozone depleting substances)
The Stockholm Convention (Persistent Organic Pollutants)
The Rotterdam Convention (Prior Informed Consent)
Basel Convention (Hazardous Waste)
International Convention for the Prevention of Pollution from Ships (MARPOL)

This material/constituent(s) is covered by the following requirements:

• All components of this product are listed on or exempt from the Australian Inventory of Industrial
Chemicals (AIIC).
• All components of this product are listed on or exempt from the New Zealand Inventory of Chemical
(NZIoC).

HSNO Group Standard: HSR002679 - Surface Coatings and Colourants (Toxic [6.7]) Group Standard

16. OTHER INFORMATION

Reason for issue: Minor Text Changes

This Safety Data Sheet has been prepared by Chemical Data Services Pty Ltd (chemdata.com.au) on behalf of its
client.

Safety Data Sheets are updated frequently. Please ensure that you have a current copy.

This SDS summarises at the date of issue our best knowledge of the health and safety hazard information of the
product, and in particular how to safely handle and use the product in the workplace. Since DuluxGroup
(Australia) Pty Ltd and DuluxGroup (New Zealand) Pty Ltd cannot anticipate or control the conditions under which
the product may be used, each user must, prior to usage, review this SDS in the context of how the user intends
to handle and use the product in the workplace.

Product Name: PROSIL 10 Reference No: SELGHSEN000875

Issued: 28 October 2019 Version: 7.4 Page 6 of 7
 Safety Data Sheet
If clarification or further information is needed to ensure that an appropriate assessment can be made, the user
should contact this company.

Our responsibility for product as sold is subject to our standard terms and conditions, a copy of which is sent to
our customers and is also available upon request.

Product Name: PROSIL 10 Reference No: SELGHSEN000875

Issued: 28 October 2019 Version: 7.4 Page 7 of 7