TurboMax
INSTANTANEOUS INDIRECT WATER HEATER
Specifications
The indirect water heater shall be a TurboMax®, model _______ as manufactured by THERMO 2000 Inc.
For the 80A and 120A models, the complete unit will meet the requirements of ASME Boiler and Pressure
Vessel Code, Section VIII, div.1. The water heater heat exchanger shall be equipped with copper piping
in the form of parallel helicoidal lines having a maximum operating pressure of 200 psi for the 120A200
model, 125 psi for the 120A125 and 150 psi for the others. All copper components and assembly will
meet the low lead requirements for potable plumbing products and shall adhere to the NSF 61 standard
(International Standard Drinking Water Systems Components Health Effects). The hot water heater shall
have a patented steel injector through which the boiler water fluid enters the top of the tank and a steel
collector through which the boiler water circuit fluid exits at the bottom of the tank. The tank shall be made
of high-carbon steel. All joints shall be arc-welded using the MIG/argon process. The tank shall have a
maximum operating pressure of 200 psi for the 120A200 model, 125 psi for the 120A125 and 150 psi for
the others. The tank shall be encased in a polyurethane insulation limiting thermal loss to ½ °F per hour.
The outer steel jacket shall be painted with baked epoxy. The water heater shall have a temperature
controller (aquastat) that makes contact when the temperature falls below the tank’s water temperature
set point minus an adjustable differential and breaks contact when the temperature rises over the set
point (95 °F to 220 °F). The tank shall have a ¾” drain (ball) valve made of brass, which have a maximum
working pressure of 200 psi. Three adjustable feet support the water heater for leveling. The water heater
shall be shipped from the factory with an ASME rated pressure relief valve set at 30psi (50 psi on models
80A, 120 and 120A) protecting the tank, a thermometer/pressure gauge, and an automatic air vent
(Unless indicated otherwise). The water heater shall be backed by a 15-year warranty on residential
applications and 10 years on commercial applications (consult the terms of the warranty included at the
end of the instruction manual shipped with the water heater).
All rights reserved. TurboMax® is a trade mark of Thermo 2000 inc.
Thermo 2000 reserves the right to modify at any time and without notice colors, components, materials, specifications or models
described or shown in this document
THERMO 2000 INC.
500, 9th avenue, Richmond (Québec) Canada
J0B 2H0
Tel : 819.826.561
Fax : 819.826.6370
[Link]
TurboMax specifications (April 2025)
R
SHOP DRAWING TURBOMAX Indirect water heater THERMO 2000 inc.
TECHNICAL DATA
Tank Heat transfer Domestic Boiler + TXT Weight Shipping
1 Models water
Volume area (sq. ft.) connection connection equipment weight
TURBOMAX 120-9A-200 120 [Link]
® 58.9 pi² 2’’ Copper M 2’’ NPT M 540 lbs 590 lbs
G TURBOMAX 120-9A-125 120 [Link]
® 58.9 pi² 2’’ Copper M 2’’ NPT M 450 lbs 500 lbs
F
TURBOMAX 120-9 ® 119 [Link] 58.9 pi² 2’’ Copper M 2’’ NPT M 430 lbs 480 lbs
90° 4 TURBOMAX 80-5A-150 ® 80 [Link] 32.7 pi² 2’’ Copper M 1-1/2’’ NPT M 317 lbs 362 lbs
TURBOMAX 80-5 ® 80 [Link] 32.7 pi² 1-1/2’’ Copper M 1-1/2’’ NPT M 308 lbs 353 lbs
I TURBOMAX 50-5 50 [Link] 32.7 pi² 1-1/2’’ Copper M 1-1/4’’ NPT M 230 lbs 268 lbs
H
®
TURBOMAX 50-3 ® 50 [Link] 19.6 pi² 1-1/4’’ Copper M 1-1/4’’ NPT M 212 lbs 250 lbs
11 9 5 TURBOMAX 30-3 ® 30 [Link] 19.6 pi² 1-1/4’’ Copper M 1-1/4’’ NPT M 170 lbs 205 lbs
COMPONENT IDENTIFICATION
1 Boiler Water Supply (Inlet)
2 Boiler Water Return (Outlet)
6 3 Domestic Water inlet
4 Domestic Water outlet
5 Pressure relief valve 3/4NPTF
6 Temp. & Press. indicator 1/2NPTM
7 Tank drain valve 3/4NPTF
8 Temperature control
9 Automatic air vent 1/2NPTM
B 10 Adjustable leg
A 11 Extra Tappings " TXT "
J C
D
E
11 10 2 7
The dimensions provided are for reference only. Please contact Thermo2000 for certified dimensions.
DIMENSIONS
MODELS A B C D E F G H I J K
in. in. in. in. in. in. in. degrees in. in. in.
TURBOMAX 120 77 7/16 69 9/16 12 1/8 6 5/16 1 1/2 28 1/16 6 45 5 3/8 13 1/8 43 1/2
TURBOMAX 80 75 3/8 67 5/8 11 1/8 5 5/16 1 1/2 24 1/16 6 45 5 3/8 12 1/8 43 1/2
TURBOMAX 50 60 11/16 52 13/16 11 13/32 7 13/32 1 1/2 22 1/16 4 45 5 1/4 7 13/32 38
TURBOMAX 30 59 11/16 51 5/8 10 13/16 6 13/16 1 1/2 18 1/16 4 45 4 1/4 6 13/16 38
