25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology
New Delhi ✈ Bali (Denpasar)
India ✈ Ayodhya from Rs22,736
Search
India ✈ Dubai
from Rs4,560 from Rs14,905
Search
New Delhi ✈ Hyderabad
Search from Rs7,134
Search
*
Manufacturing Technology: Unit II: Turning Machines
solved anna university problems on
machining time
Turning Machines - Manufacturing Technology
Home | All Subjects | MECH Department | Manufacturing Technology
<< Previous Next >>
solved anna university problems on machining time: Turning Machines - Manufacturing
Technology
SOLVED ANNA UNIVERSITY PROBLEMS ON MACHINING TIME
AU Problem 2.2
A blank 180 mm long and 70 mm diameter is to be machined in a lathe to 175 mm long
and 60 mm diameter. The workpiece rotates at 450 rpm, the feed is 0.3 mm/rev and the
maximum depth of cut is 2 mm. For turning operation; the approach plus over-travel
distance is 6 mm. Assuming that the facing operation is done after the turning. Calculate
the machining time.
Similar to Problem 2.21 on Page 2.60.
[ Ans:- Turning‘time = 4.13 min; Facing time = 0.66 min and Total time, T = 4.79 min]
AU Problem 2.3
A hollow workpiece of 50 mm diameter and 200 mm long is to be turned over in 4 passes.
If the approach length is 20 mm over travel 10 mm, feed 0.8 mm/rev and cutting speed
30 m/min. Find the machining time.
Similar to Problem 2.19 on Page 2.59.
[Ans:- T = 6 min.]
AU Problem 2.4
[Link] 1/6
25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology
Calculate the change gears to cut a single start thread M16 of 2 mm pitch on a centre
lathe, having a lead screw of 6 mm pitch. (A typical set contains the following change
gears with number of teeth: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65 and 70).
Solution:
The gear train consists of 20 teeth on the driver and 60 teeth on driven (lead screw gear)
to be used without intermediate gear. Ans.
AU Problem 2.5
India ✈︎Ayodhya
from Rs4,560 Search
*
A high-strength cast-iron bar 200 mm in diameter is being turned on a lathe at a depth
of cut d = 1.25 mm. The specific power required to machine cast iron is 3.3 W.s/mm3.
The lathe is equipped with a 12 kW electric motor and has a mechanical efficiency of
80%. The spindle speed is 500 rpm. Estimate the maximum feed that can be used before
the lathe begins to stall.
Given data:
D = 200 mm
d = 1.25 mm
Specific power, Ps = 3.3 W.s/mm3
India ✈ Malaysia
from Rs8,247
Search
P = 12 kW = 12000 W
η = 80%
N = 500 rpm
Solution:
[Link] 2/6
25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology
Actual power consumption of motor = P/η = 12/0.8 = 15 kW
AU Problem 2.6
Mumbai ✈ Kolkata
India ✈ Ayodhya from Rs8,805
Search
from Rs4,560 New Delhi ✈ Kolkata
from Rs9,145
Search
Search
India ✈ Dubai Zagreb ✈ New Delhi New Delhi ✈ Bali (Denpasar)
from Rs14,905 from Rs38,220 from Rs22,736
Search Search Search
*
A 150 mm long, 12.5 mm diameter 304 stainless steel rod is being reduced in diameter to
12.0 mm by turning on a lathe. The spindle rotates at N = 400 rpm, and the tool is
travelling at an axial speed of 200 mm/min. Calculate the cutting speed, material
removal rate, cutting time, power dissipated and cutting force.
Given data:
L = 150 mm
D1 = 12.5 mm
D2 = 12.0 mm
N = 400 rpm
Va = 200 mm/min
Solution:
[Link] 3/6
25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology
Specific power for stainless ranges from 2-5 Ws/mm3. It is assumed as 4Ws/mm3.
We know that
Power consumption,
P = Specific power × MRR = 4 × 1924.23/60 = 128.28 W
Manufacturing Technology: Unit II: Turning Machines : Tag: : Turning Machines -
Manufacturing Technology - solved anna university problems on machining time
[Link] 4/6
25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology
Home | All Subjects | MECH Department | UNIT: Manufacturing Technology
<< Previous Next >>
Related Topics
Turning Machines - general purpose machine tools
principle and operation centre of a centre lathe - Turning Machines - Manufacturing
Technology
constructional features of a centre lathe - Turning Machines - Manufacturing Technology
specification of a lathe - Turning Machines - Manufacturing Technology
Types of lathe - Turning Machines - Manufacturing Technology
Headstock mechanisms - Back Geared Headstock, All Geared Headstock
Feed Mechanism - Turning Machines - Manufacturing Technology
work holding devices - Turning Machines - Manufacturing Technology
lathe operations - Turning Machines - Manufacturing Technology
Taper turning methods - Turning Machines - Manufacturing Technology
solved problems on taper turning methods - Turning Machines - Manufacturing Technology
Thread cutting methods - Turning Machines - Manufacturing Technology
special attachments - Turning Machines - Manufacturing Technology
surface roughness in turning - Turning Machines - Manufacturing Technology
Machining time and power estimation - Turning Machines - Manufacturing Technology
Related Subjects
Manufacturing Technology
ME3493 4th semester Mechanical Dept | 2021
Regulation | 4th Semester Mechanical Dept
2021 Regulation
[Link] 5/6
25/03/2025, 13:56 solved anna university problems on machining time - Turning Machines - Manufacturing Technology
We provide Notes, Study material pdf download, lecture notes, important questions and answers, University question paper pdf download,
Question bank for Engineering students in Tamilnadu under Anna University Affiliated colleges. EEE, ECE, MECH, CIVIL, CSE, IT are the major
departments covered by our website. [2021 Regulation, All 8 semester, All 4 years ]
About | Contact Us | Privacy Policy | Terms and Conditions | Disclaimer | DMCA Complaint | Upload Content | Send Content
© 2024 - 2025 Copyright: [Link]
[Link] 6/6
