Scribd
Upload
205 views2 pages

Model FAL-EAL

KMC Fresh Air Louvers are designed to supply fresh air to buildings and Air Handling Units, featuring a washable aluminum filter and insulating gasket to prevent infiltration. They are suitable for both air intake and exhaust applications, constructed from durable aluminum alloy with options for various sizes and finishes. Proper selection of louvers is based on free area, water penetration, and airflow resistance.

Uploaded by

grantllc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
205 views2 pages

Model FAL-EAL

KMC Fresh Air Louvers are designed to supply fresh air to buildings and Air Handling Units, featuring a washable aluminum filter and insulating gasket to prevent infiltration. They are suitable for both air intake and exhaust applications, constructed from durable aluminum alloy with options for various sizes and finishes. Proper selection of louvers is based on free area, water penetration, and airflow resistance.

Uploaded by

grantllc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

FAL / EAL

Louvers

Fresh Air & Exhaust Air Louvers

Introduction
KMC Fresh Air Louver is a simple form of filter
louver. It is composed of an Exhaust louver
combined with Aluminium filter fixed at the back.

The fresh air louver is used to supply fresh air to


the buildings or Air Handling Units (AHU).

The filter is made from washable aluminium


media and is fixed on the back side of the louver.

Insulating gasket is fixed around the back of the


frame to prevent infiltration between the frame
and the wall.

Application
• Louvers are used for, both, air intake and air
exhaust
• Used in building internal and external
applications for the intake of fresh air or
exhaust of contaminated air.
• Weather resistant and suitable for us in
external applications

Product Features
• Frame and Blade Constructed from 1.2mm
thick extruded aluminum alloy 6063-T6
profiles.
• Fixed Louvers arranged horizontally and
inclined down to 45°
• Suitable for external walls as well as screens
• Frame Flange width 30mm
• High free Area hence lower pressure drop

Options
• Maximum single section upto 2000mm in
height and 2000mm in width
• For larger sizes, multiple sections possible.
• Can by supplied with various insect and bird
screens
• Optional – complete with Aluminum Pre-filters
and Volume Control Dampers if required
• Powder Coated to RAL 9010 as standard
• Other powder coated Finishes available.
• Formed Aluminum Construction with 1.6 and
2.0mm thick

Selection Procedure
The proper selection of Louver depends on
following three basic criteria:
• Louver Free Area Product Selection Check List
• Select Unit size based on desired performance characteristics.
• Water penetration
• Select Finish.
• Resistance to Air flow
Pl. refer the selection example shown in the
catalogue.

www.kmcqatar.com 1
FAL / EAL
Louvers

Fresh Air & Exhaust Air Louvers

Pressure Drop
Water Penetration at maximum 3.5 m/s (700 fpm) Free area velocity
Free Area : 50% for 1200mm (48”) (W) x 1200mm (48”) (H) test size

Free Area in sq. mt

2 www.kmcqatar.com

You might also like