Exp 1_1
# Personalized Greeting Generator
# Prompt the user for their name
name = input("Enter your name: ")
# Prompt the user for their preferred greeting style
greeting = input("Choose a greeting style (e.g., Hello, Hi, Good day): ")
# Combine the inputs into a personalized message
personalized_message = f"{greeting}, {name}!"
# Display the personalized message
print(personalized_message)
print(f"{greeting},{name} how are you?")
print(f"{name} say {greeting}")
OUTPUT:
Enter your name: Priya
Choose a greeting style (e.g., Hello, Hi, Good day): Hello
Hello, Priya!
Hello,Priya how are you?
Priya say Hello
Exp 1_2
# Program to calculate areas of geometric figures
print("Select a geometric figure: Circle, Rectangle, Triangle")
choice = input("Your choice: ").strip().lower()
if choice == "circle":
radius = float(input("Enter the radius of the circle: "))
area = 3.14159 * radius ** 2
print(f"The area of the circle is {area:.2f}")
elif choice == "rectangle":
length = float(input("Enter the length of the rectangle: "))
width = float(input("Enter the width of the rectangle: "))
area = length * width
print(f"The area of the rectangle is {area:.2f}")
elif choice == "triangle":
base = float(input("Enter the base of the triangle: "))
height = float(input("Enter the height of the triangle: "))
area = 0.5 * base * height
print(f"The area of the triangle is {area:.2f}")
else:
print("Invalid choice! Please run the program again.")
OUTPUT:
Select a geometric figure: Circle, Rectangle, Triangle
Your choice: Circle
Enter the radius of the circle: 5
The area of the circle is 78.54
Select a geometric figure: Circle, Rectangle, Triangle
Your choice: Rectangle
Enter the length of the rectangle: 5
Enter the width of the rectangle: 6
The area of the rectangle is 30.00
Exp 2_1
# Program to calculate the gross salary of an employee
# Prompt user to enter the basic salary
basic_salary = float(input("Enter the Basic Salary (BS): "))
# Calculate allowances
da = 0.7 * basic_salary # Dearness Allowance
ta = 0.3 * basic_salary # Travel Allowance
hra = 0.1 * basic_salary # House Rent Allowance
# Calculate gross salary
gross_salary = basic_salary + da + ta + hra
# Display the gross salary
print(f"The Gross Salary is: {gross_salary:.2f}")
OUTPUT:
Enter the Basic Salary (BS): 15000
The Gross Salary is: 31500.00
Exp 2_2
# Get user input for two numbers
num1 = float(input("Enter the first number: "))
num2 = float(input("Enter the second number: "))
# Perform arithmetic operations
addition =num1 + num2
subtraction = num1 - num2
multiplication = num1 * num2
division = num1 / num2
modulus = num1 % num2
# Display the results
print(f"Addition: {num1} + {num2} = {addition}")
print(f"Subtraction: {num1} - {num2} = {subtraction}")
print(f"Multiplication: {num1} * {num2} = {multiplication}")
print(f"Division: {num1} / {num2} = {division}")
print(f"Modulus: {num1} % {num2} = {modulus}")
OUTPUT:
Enter the first number: 10
Enter the second number: 5
Addition: 10.0 + 5.0 = 15.0
Subtraction: 10.0 - 5.0 = 5.0
Multiplication: 10.0 * 5.0 = 50.0
Division: 10.0 / 5.0 = 2.0
Modulus: 10.0 % 5.0 = 0.0
Exp_3
# LIST EXAMPLE
# A list can be modified (mutable)
tasks_list = ["Clean the house", "Buy groceries", "Walk the dog"]
# Add tasks to the list
tasks_list.append("Pay bills")
print("After adding a task:", tasks_list)
# Remove a task from the list
tasks_list.remove("Buy groceries")
print("After removing a task:", tasks_list)
# Update a task in the list
tasks_list[1] = "Take the dog to the vet"
print("After updating a task:", tasks_list)
# Sort the tasks alphabetically
tasks_list.sort()
print("After sorting tasks:", tasks_list)
# TUPLE EXAMPLE
# A tuple cannot be modified (immutable), so we cannot directly
add/remove/update tasks
tasks_tuple = ("Clean the house", "Buy groceries", "Walk the dog")
# Adding a task by creating a new tuple
tasks_tuple = tasks_tuple + ("Pay bills",)
print("\nAfter adding a task to tuple:", tasks_tuple)
# Removing a task by converting to a list, modifying, and converting back to a
tuple
temp_list = list(tasks_tuple)
temp_list.remove("Buy groceries")
tasks_tuple = tuple(temp_list)
print("After removing a task from tuple:", tasks_tuple)
# Updating a task (convert to list, modify, and convert back to tuple)
temp_list = list(tasks_tuple)
temp_list[1] = "Take the dog to the vet"
tasks_tuple = tuple(temp_list)
print("After updating a task in tuple:", tasks_tuple)
# Sorting a tuple (convert to list, sort, and convert back to tuple)
temp_list = list(tasks_tuple)
temp_list.sort()
tasks_tuple = tuple(temp_list)
print("After sorting tasks in tuple:", tasks_tuple)
OUTPUT:
After adding a task: ['Clean the house', 'Buy groceries', 'Walk the dog', 'Pay
bills']
After removing a task: ['Clean the house', 'Walk the dog', 'Pay bills']
After updating a task: ['Clean the house', 'Take the dog to the vet', 'Pay bills']
After sorting tasks: ['Clean the house', 'Pay bills', 'Take the dog to the vet']
After adding a task to tuple: ('Clean the house', 'Buy groceries', 'Walk the dog',
'Pay bills')
After removing a task from tuple: ('Clean the house', 'Walk the dog', 'Pay bills')
After updating a task in tuple: ('Clean the house', 'Take the dog to the vet', 'Pay
bills')
After sorting tasks in tuple: ('Clean the house', 'Pay bills', 'Take the dog to the
vet')
Exp_4_1
# Python program to demonstrate the use of sets and perform set operations
# Managing student enrollments in multiple exams
# Sample student enrollments
cet_students = {"Alice", "Bob", "Charlie", "David"}
jee_students = {"Charlie", "Eve", "Frank", "Alice"}
neet_students = {"George", "Hannah", "Alice", "Eve"}
# Display the enrollments
print("Students enrolled in CET:", cet_students)
print("Students enrolled in JEE:", jee_students)
print("Students enrolled in NEET:", neet_students)
# Union: Students appearing for at least one exam
all_students = cet_students.union(jee_students, neet_students)
print("\nStudents appearing for at least one exam:", all_students)
# Intersection: Students appearing for all three exams
common_students = cet_students.intersection(jee_students, neet_students)
print("\nStudents appearing for all three exams:", common_students)
# Difference: Students appearing for CET but not JEE
cet_not_jee = cet_students.difference(jee_students)
print("\nStudents appearing for CET but not JEE:", cet_not_jee)
# Symmetric Difference: Students appearing in CET or JEE but not both
cet_or_jee_not_both = cet_students.symmetric_difference(jee_students)
print("\nStudents appearing in CET or JEE but not both:",
cet_or_jee_not_both)
# Check if a specific student is enrolled in any exam
student_name = "Alice"
is_enrolled = student_name in all_students
print(f"\nIs {student_name} enrolled in any exam?", is_enrolled)
# Add a new student to a specific exam enrollment
cet_students.add("Ivy")
print("\nUpdated CET enrollment after adding Ivy:", cet_students)
# Remove a student from an exam enrollment
jee_students.discard("Frank")
print("\nUpdated JEE enrollment after removing Frank:", jee_students)
OUTPUT:
Students enrolled in CET: {'Charlie', 'Alice', 'David', 'Bob'}
Students enrolled in JEE: {'Charlie', 'Eve', 'Frank', 'Alice'}
Students enrolled in NEET: {'Eve', 'Hannah', 'Alice', 'George'}
Students appearing for at least one exam: {'Alice', 'David', 'Hannah', 'George',
'Frank', 'Eve', 'Bob', 'Charlie'}
Students appearing for all three exams: {'Alice'}
Students appearing for CET but not JEE: {'David', 'Bob'}
Students appearing in CET or JEE but not both: {'Eve', 'David', 'Bob', 'Frank'}
Is Alice enrolled in any exam? True
Updated CET enrollment after adding Ivy: {'Alice', 'David', 'Ivy', 'Bob', 'Charlie'}
Updated JEE enrollment after removing Frank: {'Charlie', 'Eve', 'Alice'}
Exp_4_2
records = {}
# Adding students
records[1] = {"name": "Alice", "grades": [], "attendance": 0}
records[2] = {"name": "Bob", "grades": [], "attendance": 0}
# Updating grades
records[1]["grades"].append(85)
records[1]["grades"].append(90)
records[2]["grades"].append(78)
# Updating attendance
records[1]["attendance"] += 5
records[2]["attendance"] += 3
# Calculating average grade
average_grade_1 = sum(records[1]["grades"]) / len(records[1]["grades"]) if
records[1]["grades"] else None
average_grade_2 = sum(records[2]["grades"]) / len(records[2]["grades"]) if
records[2]["grades"] else None
# Displaying student records
print(f"Student: {records[1]['name']}, Grades: {records[1]['grades']},
Attendance: {records[1]['attendance']} days, Average Grade:
{average_grade_1}")
print(f"Student: {records[2]['name']}, Grades: {records[2]['grades']},
Attendance: {records[2]['attendance']} days, Average Grade:
{average_grade_2}")
Output:
Student: Alice, Grades: [85, 90], Attendance: 5 days, Average Grade: 87.5
Student: Bob, Grades: [78], Attendance: 3 days, Average Grade: 78.0
Exp_5
while True:
num = input("Enter a number (or type -1 to exit): ")
if num == "-1":
print("Exiting program.")
break
if num.isdigit():
num = int(num)
if num % 2 == 0:
print(f"{num} is even.")
else:
print(f"{num} is odd.")
else:
print("Invalid input. Please enter a numerical value.")
Output:
Enter a number (or type -1 to exit): 5
5 is odd.
Enter a number (or type -1 to exit): 8
8 is even.
Enter a number (or type -1 to exit): 7
7 is odd.
Enter a number (or type -1 to exit): 6
6 is even.
Enter a number (or type -1 to exit): 3
3 is odd.
Enter a number (or type -1 to exit): -1
Exiting program.
Exp_6
def fact(n):
if n==0 or n==1:
return 1
else:
return n*fact(n-1)
num = int (input("Enter number: "))
print(f"factorial of {num} is {fact(num)}")
Output:
Enter number: 7
factorial of 7 is 5040
Exp_7_1
def is_prime(number):
if number <=1:
return False
for i in range(2,int(number**0.5)+1):
if number %i ==0:
return False
return True
number= int(input("Enter any integer: "))
print(is_prime(number) and f"{number} is prime" or f"{number} is not prime")
Output:
Enter any integer: 5
5 is prime
Enter any integer: 6
6 is not prime
Exp_7_2
def add(a, b):
return a+b
def diff(a, b):
return a-b
def prod(a, b):
return a*b
def divide(a, b):
if b!=0:
return a/b
else:
return "Division cannot be done by 0."
def calc():
print("Welcome to the calculator: ")
print("\nSelect the operation.")
print("\n1. Addition \n2.Subtraction \n3.Multiplication \n4.Division\n")
c=input("Enter your choice: ")
if c in ('1', '2', '3', '4'):
n1 = float(input("Enter the first number: "))
n2 = float(input("Enter the second number: "))
if c=='1':
print(f"The result is: {add(n1,n2)}")
if c=='2':
print(f"The result is: {diff(n1,n2)}")
if c=='3':
print(f"The result is: {prod(n1,n2)}")
if c=='4':
print(f"The result is: {division(n1,n2)}")
else:
print("Invalid input. Please select a valid operation.")
calc()
Output:
Welcome to the calculator:
Select the operation.
1. Addition
2.Subtraction
3.Multiplication
4.Division
Enter your choice: 3
Enter the first number: 5
Enter the second number: 4
The result is: 20.0
Exp_8
import re
filename = input("Enter the filename: ")
obj=open(filename,"w")
obj.write("hi these file contains three four and five length string words !!!")
obj.close()
n = int(input("Enter the number elements in lengths: "))
lengths = []
for i in range(n):
num = int(input(f"Enter length {i+1}: "))
lengths.append(num)
with open(filename, 'r') as file:
words = re.findall(r'\b[a-zA-Z]+\b', file.read())
for length in lengths:
filtered_words = [word for word in words if len(word) == length]
print(f'Words of length {length}:', filtered_words)
Output:
Enter the filename: abcd.txt
Enter the number elements in lengths: 5
Enter length 1: 4
Enter length 2: 3
Enter length 3: 2
Enter length 4: 5
Enter length 5: 1
Words of length 4: ['file', 'four', 'five']
Words of length 3: ['and']
Words of length 2: ['hi']
Words of length 5: ['these', 'three', 'words']
Words of length 1: []
Exp_9
try:
num1 = int(input("Enter a numerator for division: "))
num2 = int(input("Enter a denomenator for division: "))
result = num1 / num2
print("Result:", result)
except ValueError:
print("Error: Invalid input! Please enter a number.")
except ZeroDivisionError:
print("Error: Cannot divide by zero!")
except Exception as e:
print("An unexpected error occurred:", e)
finally:
print("Execution completed.")
Output:
Enter a numerator for division: 5
Enter a denomenator for division: 0
Error: Cannot divide by zero!
Execution completed.
Exp_10
import pdb
def divide(a, b):
return a / b # Might cause ZeroDivisionError
x, y = 10, 5# Intentional error
pdb.set_trace() # Start debugging
result = divide(x, y)
print(result)
output:
> c:\users\admin\desktop\python programs\pydeb2.py(8)<module>()
-> pdb.set_trace() # Start debugging
(Pdb) n
> c:\users\admin\desktop\python programs\pydeb2.py(9)<module>()
-> result = divide(x, y)
(Pdb) s
--Call--
> c:\users\admin\desktop\python programs\pydeb2.py(3)divide()
-> def divide(a, b):
(Pdb) p x
10
(Pdb) p y
5
(Pdb) p a
10
(Pdb) p b
5
(Pdb) n
> c:\users\admin\desktop\python programs\pydeb2.py(4)divide()
-> return a / b # Might cause ZeroDivisionError
(Pdb) n
--Return--
> c:\users\admin\desktop\python programs\pydeb2.py(4)divide()->2.0
-> return a / b # Might cause ZeroDivisionError
(Pdb) n
> c:\users\admin\desktop\python programs\pydeb2.py(10)<module>()
-> print(result)
(Pdb) n
2.0
--Return--
> c:\users\admin\desktop\python programs\pydeb2.py(10)<module>()->None
-> print(result)
(Pdb) q
