ASME BPE

TUBES & FITTINGS

The environment, health and safety are critical topics in todays society and in order to
protect and provide confidence to the life sciences, food and beverage consumers, a high
level of professional knowledge and competence is required. With decades of experience
in designing and manufacturing hygienic products, NOXTING has created and introduced
the `Ultra‘ sanitary product line with optimized and improved fluid processing as well as
enhanced CIP cleaning capabilities specifically focusssing on our clients product safety.

Our products are certified in accordance with all relevant and latest edition industry
standards, such as ASME BPE, EN, BS, ANSI, DIN, 3A, ISO and many others. We use only the
highest quality imported stainless steel with special emphasis on ferrite levels and
corrosion resistance, in accordance with BS EN ISO 9001:2000

We use original sealing materials, such as EPDM, PTFE, TFM and varius other polymers,
supplied from top brand European manufacturers.

NOXTING is able to supply a wide and varied range of products in accordance with the
follwoing standards: DIN, ISO, BS and ASME BPE, plus we can provide products conforming
to various other standards on demand and as required.

NOXTING s.r.o. Page: 2 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
Generally, Clamp Liners, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404
material. The material conforms typically to ASTM A182 and A276 and for specials requiring boiler grade material, these
are produced from ASTM A479. Certification also references the NACE MR0175-03 standard in most cases. Generally low
sulphur grades of stainless steel are used for good welding characteristics. Our standard range of clamp fittings covers
sizes from 4 mm to 12” (300mm) and encompasses the following internationally recognised standards.

Standards
• ASME BPE-2002
• BS 4825 Part 3 / ISO 2037
• DIN 32676
• DIN 11864-3
• 3A Standard
• ISO 2852 and SMS 3017A
• SMS 3008
• ISO 1127 Schedule Pipe Size
• BS 6362 Schedule Pipe Size
• ASTM A312 Schedule Pipe

Materials
A wide range of non-standard material is also available for the Liners, adapters and blanks, in addition to the standard
AISI 316L stainless steel. These include:
• AISI 316Ti Wn 1.4571
• AISI 316L (BN-2) Wn 1.4435 with low ferrite
• 6Mo materials & AL6-XN, 904L & 254 SMO
• Duplex alloys including SAF2507 UNS 32750
• Hastelloy C22 and C276
• Nickel Alloys such as Monel 400
• Titanium
• Nylon, ABS and Polypropylene Aluminium
• Aluminium

Surface Finish
The standard internal surface finish for clamp Liners is 0.8 - 1.0 µm Ra, with enhanced finishes of 0.38 µm Ra or better
available on request. Electro-polishing is also available to order.

NOXTING s.r.o. Page: 3 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Certification
Material traceability is available with EN 10204 3.1 certificates on all clamp ferrules and blanks, while a
certificate of conformity is offered for the clamps and seals.

Compatibility
Where the environment is deemed aggressive to either the seal or the clamp union, please provide details of the
media and operating conditions including pressure and temperature. Our technical department will assist you in the
selection of the most appropriate material and clamp system. See our technical information document for selection data
relating to stainless steel and sealing materials.

NOXTING s.r.o. Page: 4 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
ASME BPE 2014 – DT Range of Bioprocessing Fittings

NOXTING offer the full range of ASME BPE Bioprocessing Fittings in both SF1 and SF4 surface finishes. The
standard provides a good manufacturing guide to the common installation problems and offers solutions and examples
of what is considered to be acceptable and unacceptable for the design of modern Bio-Pharmaceutical installations. The
standard also covers process vessel design, pump and valve selection and installation. The DT fittings are designed for
orbital and automatic welding procedures and include, clamp ferrules, bends, tees, reducers, instrument tees and end
caps. The DT fittings are offered in accordance with the range listed in the current 2014 standard, although for continuity
we have chosen to keep to the original DT references specified in the original BPE standard, namely DT-7 to DT-30 as the
industry is already familiar with these items. Standard DT fittings are offered to SF-1 surface finish at 0.51µM Ra Max for
both tube and fittings, with SF-4 (0.38µM Ra Max) being available on special order. The welding tangents of all DT the
fittings have a controlled sulphur content of between 0.005 and 0.017%. This range is meant to balance with the sulphur
content usually found in tube and should leads to a more even welding process. Material certification is offered to
EN10204 3.1 for all fittings and tube supplied to ASME BPE.

High purity raw materials

The product made of imported stainless steel with high purity ASTM 316L, BS EN ISO 9001:2000.

Element C Si Mn P S Cr Ni Mo

% ≤0.030 ≤1.00 ≤2.00 ≤0.035 0.005 - 0.017 16.0 - 18.0 10.0-14.0 2.0-3.0

Product standard

UNS Seamless pipe and Welding pipe Forge Piece

ASTM A270 ASTM A743

S31603
ASTM A270M EN 1.4409

Surface finishing
The original MP and EP surface treatment technology, inner surface roughness of BPE series from a 0.5 µm to
Ra 0.375µm, outer surface roughness of BPE series always Ra 0.8 µm. The minimum value of electrolytic
polishing can reach Ra 0.12.

The inner surface (ID) The outer surface (OD)

The maximum surface The maximum surface ASME BPE Surface
Polishing Code
cleanliness Ra cleanliness Ra processing code
Polishing method Polishing method
µ-in µ-m µ-in µ-m

Mechanically Mechanically
HG 20 0.5 32 0.8 SF1
Polished-MP Polished-MP

Mechanically
4G 15 0.375 Polished-MP & 32 0.8 Mechanically SF4
Electro-polished-EP Polished-MP

NOXTING s.r.o. Page: 5 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
CODING / not all codec combinations are available /
Code A 1 3 2 2 0 0 8 0 0 0 2 4 2
Position
1 2 2 3 4 5 5 5 6 6 6 7 8 9
Position 1 > Product
A 0 Components B Valve C Spare parts
Position 2 > Type
0 0 Pipe 1 0 0 Clamp 13MHH3 2 0 Flange
0 1 Bend 90° 1 1 1 Clamp TC 2 1 Tank Flange NA
0 2 Bend 45° 1 2 2 Clamp 13MHP 2 2 Cross
0 3 Tee 1 3 3 Clamp Ferrule 2 3 O-ring
0 4 Tee reducer 1 4 4 Blind Clamp 2 4 Union
0 5 Cocentric reducer 1 5 5 U Bend
0 6 Excentric reducer 1 6 6 Liner
0 7 Seal clamp 1 7 7 Male
0 8 Clamp 13MHH-O 1 8 8 Nut
0 9 Clamp 13MHH-T 1 9 9 Nut Blind / Blind
Position 3 > Design
X 0 Desing 0 - 9
Position 4 > Standard
0 0 Not identification 3 ISO
1 1 DIN 4 3A
2 2 ASME BPE
Position 5 and 6 > Dimension

DIN ASME, 3A ISO

0 0 8 8 0 0 8 1/4“ 0 0 8
0 1 0 10 0 1 0 3/8“ 0 1 0
0 1 5 15 0 1 5 1/2“ 0 1 5
0 2 0 20 0 2 0 3/4“ 0 2 0
0 2 5 25 0 2 5 1“ 0 2 5 25
0 3 2 32 0 3 2 1 1/4“ 0 3 2 32
0 4 0 40 0 4 0 1 1/2“ 0 4 0 40
0 5 0 50 0 5 0 2“ 0 5 0 50
0 6 5 65 0 6 5 2 1/2“ 0 6 5 65
0 8 0 80 0 8 0 3“ 0 8 0 80
1 0 0 100 1 0 0 4“ 1 0 0 100
1 2 5 125 1 2 5
1 5 0 150 1 5 0 6“ 1 5 0
2 0 0 200 2 0 0
Position 7 > Material
1 0 AISI 304
2 1 AISI 316 L
3 2 ISO.4487
Position 8 > Finisch
1 0 SF4 4 4 0,8
2 1 SF1 5 5 Extra
3 2 0,2
Position 9 > Polisching
0 0 without
1 1 Mechanically
2 2 Electropolish

NOXTING s.r.o. Page: 6 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
Size range of finished sanitary tubes
DIN 11850 DIN 11850
ISO 3A DIN ASME BPE BS GB
Series 2 Series 1
NOM. OD T NOM. OD T NOM. OD T NOM. OD T NOM. OD T NOM. OD T NOM. OD T NOM. OD T
Size Size Size Size Size Size Size Size
1/4" 6.35 0.89
DN 10 13 1.5 DN 10 12 1.0 DN 10 12 1.5 3/8" 9.53 0.89
1/2” 12.7 1.65 DN 15 19 1.5 DN 15 18 1.0 DN 15 18 1.5 1/2" 12.7 1.65 1/2" 12.7 1.6 1/2" 12.7 1.5
3/4" 19.1 1.65 DN 20 23 1.5 DN 20 22 1.0 DN 20 22 1.5 3/4" 19.1 1.65 3/4" 19.1 1.6 3/4" 19.1 1.5
25 25.0 1.2 1” 25.4 1.65 DN 25 29 1.5 DN 25 28 1.0 DN 25 28 1.5 1" 25.4 1.65 1” 25.4 1.6 1” 25.4 1.5
32 31.8 1.2 DN 32 35 1.5 DN 32 34 1.0 DN 32 34 1.5 1 1/4" 31.8 1.6 1 1/4" 31.8 1.5
38 38.0 1.2 1 1/2" 38.1 1.65 1 1/2" 38.1 1.65 1 1/2" 38.1 1.6 1 1/2" 38.1 1.5
DN 40 41 1.5 DN 40 40 1.0 DN 40 40 1.5
51 51.0 1.2 2" 50.8 1.65 DN 50 53 1.5 DN 50 52 1.0 DN 50 52 1.5 2" 50.8 1.65 2" 50.8 1.6 2" 50.8 1.5
63 63.5 1.6 2 1/2" 63.5 1.65 2 1/2" 63.5 1.65 2 1/2" 63.5 1.6 2 1/2" 63.5 1.5
DN 65 70 2 2 1/2" 63.5 2
76 76.1 1.6 3" 76.2 1.65 3" 76.2 1.65 3" 76.2 1.6 3" 76.2 1.5
DN 80 85 2 3" 76.2 2
3 1/2" 88.9 2
101 101.6 2 4" 10 1.6 2.11 DN 100 104 2 4" 101.6 2.11 4" 101.6 2 4" 101.6 2
104 104.0 2 DN 125 129 2 4 1/2" 114.3 2
5" 129 2
129 129.0 2 6" 152.4 2.77 DN 150 154 2 6" 152.4 2.77 6" 154 2
204 204.0 2 8" 203.2 2.77 DN 200 204 2 8" 204 2
10" 254 2

Standard size DT-3-2 (ASME BPE)

Size Tube Wall Centerline Radius
Tube O.D
Thickness (CLR), R
Size, in in. mm in. mm in. mm
1 /4" 0.250 63.5 0.035 0.89 0.563 14.30

3/8" 0.375 9.53 0.035 0.89 1.125 28.58

1/2" 0.500 12.70 0.065 1.65 1.125 28.58

3/4" 0.750 19.05 0.065 1.65 1.125 28.58

1" 1.000 25.40 0.065 1.65 1.500 38.10

1½ 1.500 38.10 0.065 1.65 2.250 57.15

2" 2.000 50.80 0.065 1.65 3.000 76.20

2½ 2.500 63.50 0.065 1.65 3.750 92.25

3" 3.000 76.20 0.065 1.65 4.500 114.30

4" 4.000 101.60 0.083 2.11 6.000 152.40

6" 6.000 152.40 0.109 2.77 9.000 228 .60

NOXTING s.r.o. Page: 7 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
Hygienic Clamp: Rated Internal Working Pressure

13MHH Clamp 13MHH3 Clamp 13MHP Clamp

Nom.Size 70°F / 21°C 250°F / 121°C 70°F / 21°C 250°F / 121°C 70°F / 21°C 250°F / 121°C

PSI bar PSI bar PSI bar PSI bar PSI bar PSI bar

1/2" & 3/4" 1500 103 1200 83 1500 103 1200 83

1" & 1 1/2" 500 34 250 17 600 41 300 21 1500 103 1200 83

2" 450 31 250 17 550 38 275 19 1000 69 800 55

2 1/2 " 400 28 200 14 450 31 225 16 1000 69 800 55

3" 350 24 150 10 350 24 160 11 1000 69 800 55

4" 200 14 125 9 250 17 150 10 1000 69 800 55

5" 175 12 100 7

6" 150 10 75 5

8" 100 7 50 3

10 " 40 3 30 2

Material features of the union ring seal

EPDM NBR Viton Silicone Teflon
-48 ÷ 135°C -40 ÷ 120°C -29 ÷ 204°C -62 ÷ 232°C -40 ÷ 232°C
Temperature Range
-55 ÷ 275°F -40 ÷ 248°F -20 ÷ 400°F -80 ÷ 450°F -40 ÷ 450°F

Acid Resistance Good-Excellent Good Good Good Good-Excellent

Alkali Resistance Good -Excellent Good Poor-Good Poor-Fair Good -Excellent

Gasoline Resistance Poor-Fair Good-Excellent Good -Excellent Good Good-Excellent

Diesel Resistance Good Good Good-Excellent Good Good-Excellent

Abrasion Resistance Good -Excellent Good Good Good-Excellent Good- Excellent

Compression Set Fair Good Good-Excellent Good-Excellent Fair

NOXTING s.r.o. Page: 8 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
Standard size and tolerance of DT-7-1 (ASME BPE)
A B C
Size, in. Dimension Tolerance Dimension Tolerance Dimension Tolerance Tolerance
Type A
1/4" 0.250 ± 0.005 0.180 ± 0.005 0.984 ± 0.005 - 0.005

3/8” 0.375 ± 0.005 0.305 ± 0.005 0.984 ± 0.005 - 0.005

1/2" 0.500 ± 0.005 0.370 ± 0.005 0.984 ± 0.005 - 0.005

3/4" 0.750 ± 0.005 0.620 ± 0.005 0.984 ± 0.005 - 0.005

Type B
1.0” 1.000 ± 0.005 0.870 ± 0.005 1.984 ± 0.008 - 0.005

1.5” 1.500 ± 0.008 1.370 ± 0.005 1.984 ± 0.008 - 0.005

2.0” 2.000 ± 0.008 1.870 ± 0.005 2.516 ± 0.008 - 0.008

2.5” 2.500 ± 0.010 2.370 ± 0.005 3.047 ± 0.008 - 0.008

3.0” 3.000 ± 0.010 2.870 ± 0.005 3.579 ± 0.010 - 0.010

4.0” 4.000 ± 0.015 3.834 ± 0.005 4.682 ± 0.015 - 0.015

6.0” 6.000 ± 0.030 7.782 ± 0.005 6.570 ± 0.030 - 0.030

Tube
Size L / mm / T / in / mm / Order No.
1/4 “ 6 100 0.035 / 0.89 / A00020080002XX
3/8 “ 6 100 0.035 / 0.89 / A00020100002XX
1/2 “ 6 100 0.065 / 1.65 / A00020150002XX
3/4 “ 6 100 0.065 / 1.65 / A00020200002XX
1“ 6 100 0.065 / 1.65 / A00020250002XX
1 1/2 “ 6 100 0.065 / 1.65 / A00020400002XX
2“ 6 100 0.065 / 1.65 / A00020500002XX
21/2 “ 6 100 0.065 / 1.65 / A00020650002XX
3“ 6 100 0.065 / 1.65 / A00020800002XX
4“ 6 100 0.083 / 2.11 / A00021000002XX
6“ 6 100 0.109 / 2.77 / A00021500002XX

Gasket – Clamp / (Type B) Un-lipped DT-7-1 /

Size A / in / mm / B / in / mm / C / in / mm / Order No.

1/2“ 0.866 / 22.0 / 0.374 / 9.5 / A0702015000X00
3/4“ 0.866 / 22.0 / 0.625 / 15.9 / A0702020000X00
1“ 1.984 / 50.4 / 1.718 / 43.6 / 0.901 / 22.9 / A0702025000X00
1 1/2“ 1.984 / 50.4 / 1.718 / 43.6 / 1.401 / 35.6 / A0702040000X00
2“ 2.516 / 63.9 / 2.218 / 56.3 / 2.374 / 60.3 / A0702050000X00
2 1/2“ 3.047 / 77.4 / 2.781 / 70.6 / 2.901 / 73.7 / A0702065000X00
3“ 3.579 / 90.9 / 3.281 / 83.3 / 3.874 / 98.4 / A0702080000X00
4“ 4.682 / 118.9 / 4.344 / 110.3 / 4.842 / 123.0 / A0702100000X00
6“ 6.570 /166.9 / 5.838 / 148.3 / A0702150000X00
Order: X > E=EPDM, T=Teflon, P=PTFE, N=NBR, S=Silicone

NOXTING s.r.o. Page: 9 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Clamp 13 MHH-O
Size A / mm / Order No.
1/2“ 28.6 A0800020000100
3/4“ 28.6 A0800020000100
1“ 53.9 A0800040000100
1 1/2“ 53.9 A0800040000100
2“ 67.4 A0800050000100
2 1/2“ 80.9 A0800065000100
3“ 94.4 A0800080000100
4“ 122.4 A0800100000100
6“ 170.4 A0800150000100
8“ 221.2 A0800200000100
10“ 272.0 A0800250000100

Clamp 13 MHH-T
Size A / mm / Order No.
1/2“ 28.6 A0900020000100
3/4“ 28.6 A0900020000100
1“ 53.9 A0900040000100
1 1/2“ 53.9 A0900040000100
2“ 67.4 A0900050000100
2 1/2“ 80.9 A0900065000100
3“ 94.4 A0900080000100
4“ 122.4 A0900100000100
6“ 170.4 A0900150000100
8“ 221.2 A0900200000100
10“ 272.0 A0900250000100

Clamp 13 MHH3
Size A / mm / Order No.
1“ 53.9 A1000040000100
1 1/2“ 53.9 A1000040000100
2“ 67.4 A1000050000100
2 1/2“ 80.9 A1000065000100
3“ 94.4 A1000080000100
4“ 122.4 A1000100000100

NOXTING s.r.o. Page: 10 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Clamp TC - T
Size A / mm / Order No.
1“ 53.9 A1100040000100
1 1/2“ 53.9 A1100040000100
2“ 67.4 A1100050000100
2 1/2“ 80.9 A1100065000100
3“ 94.4 A1100080000100
4“ 122.4 A1100100000100

Clamp TC - V
Size A / mm / Order No.
1/2“ 28.0 A1110020000100
3/4“ 28.0 A1110020000100
1“ 53.9 A1110040000100
1 1/2“ 53.9 A1110040000100
2“ 67.4 A1110050000100
2 1/2“ 80.9 A1110065000100
3“ 94.4 A1110080000100
4“ 122.0 A1110100000100

Clamp TC - X
Size A / mm / Order No.
1“ 53.9 A1120040000100
1 1/2“ 53.9 A1120040000100
2“ 67.4 A1120050000100
2 1/2“ 80.9 A1120065000100
3“ 94.4 A1120080000100
4“ 122.4 A1120100000100

NOXTING s.r.o. Page: 11 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Clamp High Pressure / 13MHP /
Size A / mm / Order No.
1/2“ 28.6 A1200020000100
3/4“ 28.6 A1200020000100
1“ 52.0 A1200040000100
1 1/2“ 52.0 A1200040000100
2“ 65.5 A1200050000100
2 1/2“ 79.0 A1200065000100
3“ 92.5 A1200080000100
4“ 158.8 A1200100000100
6“ 170.4 A1200150000100

Clamp Blind / DT-31 (BPE 2009) DT-4.1.5-2 (BPE 2014) /

Size A / in / mm / B / in / mm / Order No.
1/2“ 0.187 / 4.7/ 0,984 / 25.0 / A1400015000100
3/4“ 0.187 / 4.7/ 0.984 / 25.0 / A1400020000100
1“ 0.250 / 6.4 / 1.984 / 50.4 / A1400025000100
1 1/2“ 0.250 / 6.4 / 1.984 / 50.4 / A1400040000100
2“ 0.250 / 6.4 / 2.516 / 63.9 / A1400050000100
2 1/2“ 0.250 / 6.4 / 3.047 / 77.5 / A1400065000100
3“ 0.250 / 6.4 / 3.579 / 90.9 / A1400080000100
4“ 0.312 / 7.9 / 4.682 / 119.0 / A1400100000100
6“ 0.437 / 11.1 / 6,570 /166.9 / A1400150000100

Tank Clamp Flange - Welded

Size B / mm / C / mm / D / mm / Order No.
3/4 “ 2.145 / 54.5 / 0.236 / 6.0 / 0.984 / 25.0 / A21000150002XX
1“ 3.326 / 84.5 / 0.236 / 6.0 / 0.984 / 25.0 / A21000250002XX
1 1/2 “ 3.326 / 84.5 / 0.236 / 6.0 / 0.984 / 25.0 / A21000400002XX
2“ 3.917 / 99.5 / 0.236 / 6.0 / 0.984 / 25.0 / A21000500002XX
2 1/2 “ 4.409 / 112.0 / 0.394 / 10.0 / 1.496 / 38.0 / A21000650002XX
3“ 5.157 / 131.0 / 0.394 / 10.0 / 1.496 / 38.0 / A21000800002XX

NOXTING s.r.o. Page: 12 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Clamp Liner Mini / BS Standard (4825 Part 3) DT-4.1.1-4 (BPE 2014) /
Size A / in / mm / B / in / mm / C / in / mm / Order No.
1/2“ 0.500 / 12.7 / 0,500 / 12.7 / 0,984 / 25.0 / A132201500002xx
3/4“ 0.500 / 12.7 / 0,750 / 19.1 / 0.984 / 25.0 / A132202000002xx
1“ 0.500 / 12.7 / 1.000 / 25.4 / 1.984 / 50.4 / A132202500002xx
1 1/2“ 0.500 / 12.7 / 1.500 / 38.1 / 1.984 / 50.4 / A132204000002xx
2“ 0.500 / 12.7 / 2.000 / 50.8 / 2.516 / 63.9 / A132205000002xx
2 1/2“ 0.500 / 12.7 / 2.500 / 63.5 / 3.047 / 77.5 / A132206500002xx
3“ 0.500 / 12.7 / 3.000 / 76.2 / 3.579 / 90.9 / A132208000002xx
4“ 0.625 / 15.9 / 4.000 / 101.6/ 4.682 / 119 / A132210000002xx

Clamp Liner Short / BS Standard (4825 Part 3) DT-4.1.1-4 (BPE 2014) /

Size A / in / mm / B / in / mm / C / in / mm / Order No.
1/4“ 1.130 / 28.7 / 0.250 / 6.35 / 0,984 / 25.0 / A131200800002xx
3/8“ 1.130 / 28.7 / 0.375 / 9.53 / 0,984 / 25.0 / A131201000002xx
1/2“ 1.130 / 28.7 / 0,500 / 12.7 / 0,984 / 25.0 / A131201500002xx
3/4“ 1.130 / 28.7 / 0,750 / 19.1 / 0.984 / 25.0 / A131202000002xx
1“ 1.130 / 28.7 / 1.000 / 25.4 / 1.984 / 50.4 / A131202500002xx
1 1/2“ 1.130 / 28.7 / 1.500 / 38.1 / 1.984 / 50.4 / A131204000002xx
2“ 1.130 / 28.7 / 2.000 / 50.8 / 2.516 / 63.9 / A131205000002xx
2 1/2“ 1.130 / 28.7 / 2.500 / 63.5 / 3.047 / 77.5 / A131206500002xx
3“ 1.130 / 28.7 / 3.000 / 76.2 / 3.579 / 90.9 / A131208000002xx
4“ 1.130 / 28.7 / 4.000 / 101.6/ 4.682 / 119 / A131210000002xx
6“ 1.500 / 38.1 / 6.000 / 152.4 / 6.570 / 166.9 / A131215000002xx

Clamp Liner / BS Standard (4825 Part 3) DT-4.1.1-4 (BPE 2014) /

Size A / in / mm / B / in / mm / C / in / mm / Order No.
1/4“ 1.750 / 44.5 / 0.250 / 6.35 / 0,984 / 25.0 / A130200800002xx
3/8“ 1.750 / 44.5 / 0.375 / 9.53 / 0,984 / 25.0 / A130201000002xx
1/2“ 1.750 / 44.5 / 0,500 / 12.7 / 0,984 / 25.0 / A130201500002xx
3/4“ 1.750 / 44.5 / 0,750 / 19.1 / 0.984 / 25.0 / A130202000002xx
1“ 1.750 / 44.5 / 1.000 / 25.4 / 1.984 / 50.4 / A130202500002xx
1 1/2“ 1.750 / 44.5 / 1.500 / 38.1 / 1.984 / 50.4 / A130204000002xx
2“ 2.250 / 57.2 / 2.000 / 50.8 / 2.516 / 63.9 / A130205000002xx
2 1/2“ 2.250 / 57.2 / 2.500 / 63.5 / 3.047 / 77.5 / A130206500002xx
3“ 2.250 / 57.2 / 3.000 / 76.2 / 3.579 / 90.9 / A130208000002xx
4“ 2.250 / 57.2 / 4.000 / 101.6/ 4.682 / 119.0 / A130210000002xx
6“ 3.000 / 76.2 / 6.000 / 152.4 / 6.570 / 166.9 / A130215000002xx

NOXTING s.r.o. Page: 13 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Bend 45° – Welded / DT-8 (BPE 2009) DT-4.1.1-4 (BPE 2014) /
Size A / in / mm / R / in / mm / Order No.
1/2“ 2.250 / 57.2 / 1.125 / 28.6 / A02020150002XX
3/4“ 2.250 / 57.2 / 1.125 / 28.6 / A02020200002XX
1“ 2.250 / 57.2 / 1.500 / 38.1 / A02020250002XX
1 1/2“ 2.500 / 63.5 / 2.250 / 57.2 / A02020400002XX
2“ 3.000 / 76.2 / 3.000 / 76.2 / A02020500002XX
2 1/2“ 3.375 / 85.7 / 3.750 / 95.3 / A02020650002XX
3“ 3.625 / 92.1 / 4.500 / 114.3 / A02020800002XX
4“ 4.500 / 114.3 / 6.000 / 152.4 / A02021000002XX
6“ 6.250 / 158.8 / 9.000 / 228.6 / A02021500002XX

Bend 45° - Weld/Clamp / DT-13 (BPE 2009) DT-4.1.1-5 (BPE 2014) /

Size A / in / mm / R / in / mm / B / in / mm / Order No.

1/2“ 2.250 / 57.2 / 1.125 / 28.6 / 1.000 / 25.4 / A02120150002XX
3/4“ 2.250 / 57.2 / 1.125 / 28.6 / 1.000 / 25.4 / A02120200002XX
1“ 2.250 / 57.2 / 1.500 / 38.1 / 1.125 / 28.6 / A02120250002XX
1 1/2“ 2.500 / 63.5 / 2.250 / 57.2 / 1.438 / 36.5 / A02120400002XX
2“ 3.000 / 76.2 / 3.000 / 76.2 / 1.750 / 44.5 / A02120500002XX
2 1/2“ 3.375 / 85.7 / 3.750 / 95.3 / 2.063 / 52.4 / A02120650002XX
3“ 3.625 / 92.1 / 4.500 / 114.3 / 2.375 / 60.3 / A02120800002XX
4“ 4.500 / 114.3 / 6.000 / 152.4 / 3.125 / 79.4 / A02121000002XX
6.0“ 6.250 / 158.8 / 9.000 / 228.6 / 5.250 / 133.4 / A02121500002XX

Bend 45° - Clamp / DT-17 (BPE 2009) DT-4.1.1-6 (BPE 2014) /

Size A / in / mm / R / in / mm / Order No.
1/2“ 2.250 / 57.2 / 1.125 / 28.6 / A02220150002XX
3/4“ 2.250 / 57.2 / 1.125 / 28.6 / A02220200002XX
1“ 2.250 / 57.2 / 1.500 / 38.1 / A02220250002XX
1 1/2“ 2.500 / 63.5 / 2.250 / 57.2 / A02220400002XX
2“ 3.000 / 76.2 / 3.000 / 76.2 / A02220500002XX
2 1/2“ 3.375 / 85.7 / 3.750 / 95.3 / A02220650002XX
3“ 3.625 / 92.1 / 4.500 / 114.3 / A02220800002XX
4“ 4.500 / 114.3 / 6.000 / 152.4 / A02221000002XX
6.0“ 6.250 / 158.8 / 9.000 / 228.6 / A02221500002XX

NOXTING s.r.o. Page: 14 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Bend 90° - Welded / DT-8 (BPE 2009) DT-4.1.1-4 (BPE 2014) /
Size A / in / mm / R / in / mm / Order No.
3/8“ 2.625 / 66.7 / 1.125 / 28.6 / A01020100002XX
1/2“ 3.000 / 76.2 / 1.125 / 28.6 / A01020150002XX
3/4“ 3.000 / 76.2 / 1.125 / 28.6 / A01020200002XX
1“ 3.000 / 76.2 / 1.500 / 38.1 / A01020250002XX
1 1/2“ 3.750 / 95.3 / 2.250 / 57.2 / A01020400002XX
2“ 4.750 / 120.7 / 3.000 / 76.2 / A01020500002XX
2 1/2“ 5.500 / 139.7 / 3.750 / 95.3 / A01020650002XX
3“ 6.250 / 158.8 / 4.500 / 114.3 / A01020800002XX
4“ 8.000 / 203.2 / 6.000 / 152.4 / A01021000002XX
6“ 11.500 / 292.1 / 9.000 / 228.6 / A01021500002XX

Bend 90° - Weld/Clamp / DT-13 (BPE 2009) DT-4.1.1-5 (BPE 2014) /

Size A / in / mm / R / in / mm / B / in / mm / Order No.
3/8“ 2.625 / 66.7 / 1.125 / 28.6 / 1.625 /41.3 / A01120100002XX
1/2“ 3.000 / 76.2 / 1.125 / 28.6 / 1.625 /41.3 / A01120150002XX
3/4“ 3.000 / 76.2 / 1.125 / 28.6 / 1.625 /41.3 / A01120200002XX
1“ 3.000 / 76.2 / 1.500 / 38.1 / 2.000 / 50.8 / A01120250002XX
1 1/2“ 3.750 / 95.3 / 2.250 / 57.2 / 2.750 / 69.9 / A01120400002XX
2“ 4.750 / 120.7 / 3.000 / 76.2 / 3.500 / 88.9 / A01120500002XX
2 1/2“ 5.500 / 139.7 / 3.750 / 95.3 / 4.250 / 108.0 / A01120650002XX
3“ 6.250 / 158.8 / 4.500 / 114.3 / 5.000 / 127.0 / A01120800002XX
4“ 8.000 / 203.2 / 6.000 / 152.4 / 6.625 / 168.3 / A01121000002XX
6“ 11.500 / 292.1 / 9.000 / 228.6 / 10.500 / 266.7 / A01121500002XX

Bend 90° - Clamp / DT-17 (BPE 2009) DT-4.1.1-6 (BPE 2014) /

Size A / in / mm / R / in / mm / Order No.

1/2“ 1.625 /41.3 / 1.125 / 28.6 / A01220150002XX
3/4“ 1.625 /41.3 / 1.125 / 28.6 / A01220200002XX
1“ 2.000 / 50.8 / 1.500 / 38.1 / A01220250002XX
1 1/2“ 2.750 / 69.9 / 2.250 / 57.2 / A01220400002XX
2“ 3.500 / 88.9 / 3.000 / 76.2 / A01220500002XX
2 1/2“ 4.250 / 108.0 / 3.750 / 95.3 / A01220650002XX
3“ 5.000 / 127.0 / 4.500 / 114.3 / A01220800002XX
4“ 6.625 / 168.3 / 6.000 / 152.4 / A01221000002XX
6“ 10.500 / 266.7 / 9.000 / 228.6 / A01221500002XX

NOXTING s.r.o. Page: 15 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Bend 180° - welded / DT-23 (BPE 2009) DT-4.1.1-7 (BPE 2014) /
Size A / in / mm / B / in / mm / Order No.
1/2 “ 4.500 / 114.3 / 3.000 / 76.2 / A15020150002XX
3/4 “ 4.500 / 114.3 / 3.000 / 76.2 / A15020200002XX
1“ 3.000 / 76.2 / 3.000 / 76.2 / A15020250002XX
1 1/2 “ 4.500 / 114.3 / 4.500 / 114.3 / A15020400002XX
2“ 6.000 / 152.4 / 5.000 / 127.0 / A15020500002XX
2 1/2 “ 7.500 / 190.5 / 5.750 / 146.1 / A15020650002XX
3“ 9.000 / 228.6 / 6.500 / 165.1 / A15020800002XX
4“ 12.000 / 304.8 / 8.500 / 215.9 / A15021000002XX
6“ 18.000 / 457.2 / 11.500 / 292.1 / A15021500002XX

NOXTING s.r.o. Page: 16 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Tee / DT-9 (BPE 2009) DT-4.1.2-1 (BPE 2014) /
Size A / in / mm / Order No.
1/4 “ 1.750 / 44.5 / A03020080002XX
3/8 “ 1.750 / 44.5 / A03020100002XX
1/2 “ 1.875 / 47.6 / A03020150002XX
3/4 “ 2.000 / 50.8 / A03020200002XX
1“ 2.152 / 54.0 / A03020250002XX
1 1/2 “ 2.375 / 60.3 / A03020400002XX
2“ 2.875 / 73.0 / A03020500002XX
2 1/2 “ 3.125 / 79.4 / A03020650002XX
3“ 3.375 / 85.7 / A03020800002XX
4“ 4.125 / 104.8 / A03021000002XX
6“ 5.625 / 142.9 / A03021500002XX

Tee – Weld/Clamp / DT-15 (BPE 2009) DT-4.1.2-2 (BPE 2014) /

Size A / in / mm / B / in / mm / Order No.
1/2 “ 1.875 / 47.6 / 1.000/ 25.4 / A03120150002XX
3/4 “ 2.000 / 50.8 / 1.125 / 28.6 / A03120200002XX
1“ 2.152 / 54.0 / 1.125 / 28.6 / A03120250002XX
1 1/2 “ 2.375 / 60.3 / 1.375 /34.9 / A03120400002XX
2“ 2.875 / 73.0 / 1.625 / 41.3 / A03120500002XX
2 1/2 “ 3.125 / 79.4 / 1.875 / 47.6 / A03120650002XX
3“ 3.375 / 85.7 / 2.125 / 54.0 / A03120800002XX
4“ 4.125 / 104.8 / 2.750 / 69.9 / A03121000002XX
6“ 5.625 / 142.9 / 4.625 / 117.5 / A03121500002XX

Tee Instrument - Welded/Clamp / DT-25 (BPE 2009) DT-4.1.2-3 (BPE 2014) /

Size A / in / mm / B / in / mm / C / in / mm / Order No.
1/4 “ 0.875 / 22.2 / 1.750 / 44.5 / 1.750 / 44.5 / A03220080002XX
3/8 “ 0.875 / 22.2 / 1.750 / 44.5 / 1.750 / 44.5 / A03220100002XX
1/2 “ 0.875 / 22.2 / 1.875 / 47.6 / 1.875 / 47.6 / A03220150002XX
3/4 “ 1.000/ 25.4 / 2.000 / 50.8 / 2.000 / 50.8 / A03220200002XX
1“ 1.125 / 28.6 / 2.152 / 54.0 / 2.152 / 54.0 / A03220250002XX
1 1/2 “ 1.375 /34.9 / 2.375 / 60.3 / 2.375 / 60.3 / A03220400002XX
2“ 1.625 / 41.3 / 2.875 / 73.0 / 2.875 / 73.0 / A03220500002XX
2 1/2 “ 1.875 / 47.6 / 3.125 / 79.4 / 3.125 / 79.4 / A03220650002XX
3“ 2.125 / 54.0 / 3.375 / 85.7 / 3.375 / 85.7 / A03220800002XX
4“ 2.750 / 69.9 / 4.125 / 104.8 / 4.125 / 104.8 / A03221000002XX
6“ 4.625 / 117.5 / 5.625 / 142.9 / 5.625 / 142.9 / A03221500002XX

NOXTING s.r.o. Page: 17 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Tee - Clamp / DT-18 (BPE 2009) DT-4.1.2-4 (BPE 2014) /
Size A / in / mm / Order No.
1/2 “ 2.250 / 57.2 / A03320150002XX
3/4 “ 2.375 / 60.3 / A03320200002XX
1“ 2.625 / 66.7 / A03320250002XX
1 1/2 “ 2.875 / 73.0 / A03320400002XX
2“ 3.375 / 85.7 / A03320500002XX
2 1/2 “ 3.625 / 92.1 / A03320650002XX
3“ 3.875 / 98.4 / A03320800002XX
4“ 4.750 / 120.7 / A03321000002XX
6“ 7.125 /181.0 / A03321500002XX

Tee Short - Clamp / DT-18 (BPE 2009) DT-4.1.2-5 (BPE 2014) /

Size A / in / mm / B / in / mm / Order No.
1/2 “ 2.250 / 57.2 / 1.000 / 25.4 / A03420150002XX
3/4 “ 2.375 / 60.3 / 1.125 / 28.6 / A03420200002XX
1“ 2.625 / 66.7 / 1.125 / 28.6 / A03420250002XX
1 1/2 “ 2.875 / 73.0 / 1.375 / 34.9 / A03420400002XX
2“ 3.375 / 85.7 / 1.625 / 41.3 / A03420500002XX
2 1/2 “ 3.625 / 92.1 / 1.875 / 47.6 / A03420650002XX
3“ 3.875 / 98.4 / 2.125 / 54.0 / A03420800002XX
4“ 4.750 / 120.7 / 2.750 / 69.9 / A03421000002XX
6“ 7 125 /181.0 / 4.625 / 117.5 / A03421500002XX

NOXTING s.r.o. Page: 18 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Tee Instrument - Welded/Clamp
Size X Size Y A / in / mm / B / in / mm / Order No.
1/2 “ 1 1/2 “ 2.500 / 63.5 / 0.875 / 22.20 / A04320150402XX
3/4 “ 1 1/2 “ 2.500 / 63.5 / 1.000 / 25.40 / A04320200402XX
1“ 1 1/2 “ 2.500 / 63.5 / 1.125 / 28.60 / A04320250402XX
1 1/2 “ 2“ 2.750 / 69.9 / 1.000 / 25.40 / A04320150502XX
3/4 “ 2“ 2.750 / 69.9 / 1.125 / 28.60 / A04320400502XX
1“ 2“ 2.750 / 69.9 / 1.250 / 31.75 / A04320250502XX
1 1/2 “ 2“ 2.750 / 69.9 / 1.500/ 38.10 / A04320400502XX

Tee Instrument - Clamp

Size X Size Y A / in / mm / B / in / mm / Order No.
1/2 “ 1 1/2 “ 3.000 / 76.2 / 0.875 / 22.20 / A04420150402XX
3/4 “ 1 1/2 “ 3.000 / 76.2 / 1.000 / 25.40 / A04420200402XX
1“ 1 1/2 “ 3.000 / 76.2 / 1.125 / 28.60 / A04420250402XX
1 1/2 “ 2“ 3.250 / 82.6 / 1.000 / 25.40 / A04420150502XX
3/4 “ 2“ 3.250 / 82.6 / 1.125 / 28.60 / A04420400502XX
1“ 2“ 3.250 / 82.6 / 1.250 / 31.75 / A04420250502XX
1 1/2 “ 2“ 3.250 / 82.6 / 1.500/ 38.10 / A04420400502XX

NOXTING s.r.o. Page: 19 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Cross - Welded
Size A / in / mm / Order No.
1/2 “ 12.7 x 1.65 A22020150002XX
3/4 “ 19.1 x 1.65 A22020200002XX
1“ 25.4 x 1.65 A22020250002XX
1 1/2 “ 38.1 x 1.65 A22020400002XX
2“ 50.8 x 1.65 A22020500002XX
21/2 “ 63.5 x 1.65 A22020650002XX
3“ 76.2 x 1.65 A22020800002XX
4“ 101.6 x 2.11 A22021000002XX
6“ 152.4 x 2.11 A22021500002XX

Cross - Clamp

Size A / in / mm / Order No.

1/2 “ 2.250 / 57.2 / A22220150002XX
3/4 “ 2.375 / 60.3 / A22220200002XX
1“ 2.625 / 66.7 / A22220250002XX
1 1/2 “ 2.875 / 73.0 / A22220400002XX
2“ 3.375 / 85.7 / A22220500002XX
21/2 “ 3.625 / 92.1 / A22220650002XX
3“ 3.875 / 98.4 / A22220800002XX
4“ 4.750 / 120.7 / A22221000002XX

NOXTING s.r.o. Page: 20 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Tee Reducing – welded / DT-10 (BPE 2009) DT-4.1.2-6 (BPE 2014) /
Size X Size Y A / in / mm / B / in / mm / Order No.
1/2 “ 3/8 “ 1.857 / 74.6 / 1.857 / 74.6 / A04020150102XX
3/4 “ 1/4 “ 2.000 / 50.8 / 2.000 / 50.8 / A04020200082XX
3/4 “ 3/8 “ 2.000 / 50.8 / 2.000 / 50.8 / A04020200102XX
3/4 “ 1/2 “ 2.000 / 50.8 / 2.000 / 50.8 / A04020200152XX
1“ 1/4 “ 2.125 / 54.0 / 2.125 / 54.0 / A04020250082XX
1“ 3/8 “ 2.125 / 54.0 / 2.125 / 54.0 / A04020250102XX
1“ 1/2 “ 2.125 / 54.0 / 2.125 / 54.0 / A04020250152XX
1“ 3/4 “ 2.125 / 54.0 / 2.125 / 54.0 / A04020250202XX
1 1/2 “ 1/4 “ 2.375 / 60.3 / 2.375 / 60.3 / A04020400082XX
1 1/2 “ 1/2 “ 2.375 / 60.3 / 2.375 / 60.3 / A04020400152XX
1 1/2 “ 3/4 “ 2.375 / 60.3 / 2.375 / 60.3 / A04020400202XX
1 1/2 “ 1“ 2.375 / 60.3 / 2.375 / 60.3 / A04020400252XX
2“ 1/4 “ 2.875 / 73.0 / 2.625 / 66.7 / A04020500082XX
2“ 3/8 “ 2.875 / 73.0 / 2.625 / 66.7 / A04020500102XX
2“ 1/2 “ 2.875 / 73.0 / 2.625 / 66.7 / A04020500152XX
2“ 3/4 “ 2.875 / 73.0 / 2.625 / 66.7 / A04020500202XX
2“ 1“ 2.875 / 73.0 / 2.625 / 66.7 / A04020500252XX
2“ 1 1/2 “ 2.875 / 73.0 / 2.625 / 66.7 / A04020500402XX
2 1/2 “ 3/8 “ 3.125 / 79.4 / 2.875 / 73.0 / A04020650102XX
2 1/2 “ 1/2 “ 3.125 / 79.4 / 2.875 / 73.0 / A04020650152XX
2 1/2 “ 3/4 “ 3.125 / 79.4 / 2.875 / 73.0 / A04020650202XX
2 1/2 “ 1“ 3.125 / 79.4 / 2.875 / 73.0 / A04020650252XX
2 1/2 “ 1 1/2 “ 3.125 / 79.4 / 2.875 / 73.0 / A04020650402XX
2 1/2 “ 2“ 3.125 / 79.4 / 2.875 / 73.0 / A04020650502XX
3“ 1/2 “ 3.375 / 85.7 / 3.125 / 79.4 / A04020800152XX
3“ 3/4 “ 3.375 / 85.7 / 3.125 / 79.4 / A04020800202XX
3“ 1“ 3.375 / 85.7 / 3.125 / 79.4 / A04020800252XX
3“ 1 1/2 “ 3.375 / 85.7 / 3.125 / 79.4 / A04020800402XX
3“ 2“ 3.375 / 85.7 / 3.125 / 79.4 / A04020800502XX
3“ 2 1/2 “ 3.375 / 85.7 / 3.125 / 79.4 / A04020800652XX
4“ 1/2 “ 4.125 / 104.8 / 3.625 / 92.1 / A04021000152XX
4“ 3/4 “ 4.125 / 104.8 / 3.625 / 92.1 / A04021000202XX
4“ 1“ 4.125 / 104.8 / 3.625 / 92.1 / A04021000252XX
4“ 1 1/2 “ 4.125 / 104.8 / 3.625 / 92.1 / A04021000402XX
4“ 2“ 4.125 / 104.8 / 3.875 / 98.4 / A04021000502XX
4“ 2 1/2 “ 4.125 / 104.8 / 3.875 / 98.4 / A04021000652XX
4“ 3“ 4.125 / 104.8 / 3.875 / 98.4 / A04021000802XX
6“ 1“ 5.625 / 142.9 / 4.875 / 123.8 / A04021500252XX
6“ 1 1/2 “ 5.625 / 142.9 / 4.875 / 123.8 / A04021500402XX
6“ 2“ 5.625 / 142.9 / 4.875 / 123.8 / A04021500502XX
6“ 2 1/2 “ 5.625 / 142.9 / 4.875 / 123.8 / A04021500652XX
6“ 3“ 5.625 / 142.9 / 4.875 / 123.8 / A04021500802XX
6“ 4“ 5.625 / 142.9 / 5.125 / 130.2 / A04021501002XX

NOXTING s.r.o. Page: 21 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Tee Reducing – Welded/Clamp / DT-14 (BPE 2009) DT-4.1.2-7 (BPE 2014) /
Size X Size Y A / in / mm / B / in / mm / Order No.
3/4 “ 1/2 “ 2.000 / 50.8 / 1.000 / 25.4 / A04120200152XX
1“ 1/2 “ 2.125 / 54.0 / 1.125 / 28.6 / A04120250152XX
1“ 3/4 “ 2.125 / 54.0 / 1.125 / 28.6 / A04120250202XX
1 1/2 “ 1/2 “ 2.375 / 60.3 / 1.375 /34.9 / A04120400152XX
1 1/2 “ 3/4 “ 2.375 / 60.3 / 1.375 /34.9 / A04120400202XX
1 1/2 “ 1“ 2.375 / 60.3 / 1.375 /34.9 / A04120400252XX
2“ 1/2 “ 2.875 / 73.0 / 1.625 / 41.3 / A04120500152XX
2“ 3/4 “ 2.875 / 73.0 / 1.625 / 41.3 / A04120500202XX
2“ 1“ 2.875 / 73.0 / 1.625 / 41.3 / A04120500252XX
2“ 1 1/2 “ 2.875 / 73.0 / 1.625 / 41.3 / A04120500402XX
2 1/2 “ 1/2 “ 3.125 / 79.4 / 1.875 / 47.6 / A04120650152XX
2 1/2 “ 3/4 “ 3.125 / 79.4 / 1.875 / 47.6 / A04120650202XX
2 1/2 “ 1“ 3.125 / 79.4 / 1.875 / 47.6 / A04120650252XX
2 1/2 “ 1 1/2 “ 3.125 / 79.4 / 1.875 / 47.6 / A04120650402XX
2 1/2 “ 2“ 3.125 / 79.4 / 1.875 / 47.6 / A04120650502XX
3“ 1/2 “ 3.375 / 85.7 / 2.125 / 54.0 / A04120800152XX
3“ 3/4 “ 3.375 / 85.7 / 2.125 / 54.0 / A04120800202XX
3“ 1“ 3.375 / 85.7 / 2.125 / 54.0 / A04120800252XX
3“ 1 1/2 “ 3.375 / 85.7 / 2.125 / 54.0 / A04120800402XX
3“ 2“ 3.375 / 85.7 / 2.125 / 54.0 / A04120800502XX
3“ 2 1/2 “ 3.375 / 85.7 / 2.125 / 54.0 / A04120800652XX
4“ 1/2 “ 4.125 / 104.8 / 2.625 / 66.7 / A04121000152XX
4“ 3/4 “ 4.125 / 104.8 / 2.625 / 66.7 / A04121000202XX
4“ 1“ 4.125 / 104.8 / 2.625 / 66.7 / A04121000252XX
4“ 1 1/2 “ 4.125 / 104.8 / 2.625 / 66.7 / A04121000402XX
4“ 2“ 4.125 / 104.8 / 2.625 / 66.7 / A04121000502XX
4“ 2 1/2 “ 4.125 / 104.8 / 2.625 / 66.7 / A04121000652XX
4“ 3“ 4.125 / 104.8 / 2.625 / 66.7 / A04121000802XX
6“ 1“ 5.625 / 142.9 / 3.625 / 92.1 / A04121500252XX
6“ 1 1/2 “ 5.625 / 142.9 / 3.625 / 92.1 / A04121500402XX
6“ 2“ 5.625 / 142.9 / 3.625 / 92.1 / A04121500502XX
6“ 2 1/2 “ 5.625 / 142.9 / 3.625 / 92.1 / A04121500652XX
6“ 3“ 5.625 / 142.9 / 3.625 / 92.1 / A04121500802XX
6“ 4“ 5.625 / 142.9 / 3.750 / 95.3 / A04121501002XX

NOXTING s.r.o. Page: 22 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Tee Reducing - Clamp / DT-19 (BPE 2009) DT-4.1.2-8 (BPE 2014) /
Size X Size Y A / in / mm / B / in / mm / Order No.
1/2 “ 3/8 “ 2.375 / 60.3 / 2.375 / 60.3 / A04220150102XX
3/4 “ 1/2 “ 2.500 / 63.5 / 2.500 / 63.5 / A04220200152XX
1“ 1/4 “ 2.625 / 66.7 / 2.625 / 66.7 / A04220250082XX
1“ 1/2 “ 2.625 / 66.7 / 2.625 / 66.7 / A04220250152XX
1“ 3/4 “ 2.625 / 66.7 / 2.625 / 66.7 / A04220250202XX
1 1/2 “ 1/2 “ 2.875 / 73.0 / 2.875 / 73.0 / A04220400152XX
1 1/2 “ 3/4 “ 2.875 / 73.0 / 2.875 / 73.0 / A04220400202XX
1 1/2 “ 1“ 2.875 / 73.0 / 2.875 / 73.0 / A04220400252XX
2“ 1/2 “ 3.375 / 85.7 / 3.125 / 79.4 / A04220500152XX
2“ 3/4 “ 3.375 / 85.7 / 3.125 / 79.4 / A04220500202XX
2“ 1“ 3.375 / 85.7 / 3.125 / 79.4 / A04220500252XX
2“ 1 1/2 “ 3.375 / 85.7 / 3.125 / 79.4 / A04220500402XX
2 1/2 “ 1/2 “ 3.375 / 85.7 / 3.375 / 85.7 / A04220650152XX
2 1/2 “ 3/4 “ 3.375 / 85.7 / 3.375 / 85.7 / A04220650202XX
2 1/2 “ 1“ 3.375 / 85.7 / 3.375 / 85.7 / A04220650252XX
2 1/2 “ 1 1/2 “ 3.375 / 85.7 / 3.375 / 85.7 / A04220650402XX
2 1/2 “ 2“ 3.625 / 92.1 / 3.375 / 85.7 / A04220650502XX
3“ 1/2 “ 3.875 / 98.4 / 3.625 / 92.1 / A04220800152XX
3“ 3/4 “ 3.875 / 98.4 / 3.625 / 92.1 / A04220800202XX
3“ 1“ 3.875 / 98.4 / 3.625 / 92.1 / A04220800252XX
3“ 1 1/2 “ 3.875 / 98.4 / 3.625 / 92.1 / A04220800402XX
3“ 2“ 3.875 / 98.4 / 3.625 / 92.1 / A04220800502XX
3“ 2 1/2 “ 3.875 / 98.4 / 3.625 / 92.1 / A04220800652XX
4“ 1/2 “ 4.750 / 120.7 / 4.125 / 104.5 / A04221000152XX
4“ 3/4 “ 4.750 / 120.7 / 4.125 / 104.5 / A04221000202XX
4“ 1“ 4.750 / 120.7 / 4.125 / 104.5 / A04221000252XX
4“ 1 1/2 “ 4.750 / 120.7 / 4.125 / 104.5 / A04221000402XX
4“ 2“ 4.750 / 120.7 / 4.375 / 111.5 / A04221000502XX
4“ 2 1/2 “ 4.750 / 120.7 / 4.375 / 111.5 / A04221000652XX
4“ 3“ 4.750 / 120.7 / 4.375 / 111.5 / A04221000802XX
6“ 3“ 7.125 /181.0 / 5.375 / 136.5 / A04221500802XX
6“ 4“ 7.125 /181.0 / 5.750 / 146.1 / A04221501002XX

NOXTING s.r.o. Page: 23 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Tee Reducing Short - Clamp / DT-20 (BPE 2009) DT-4.1.2-9 (BPE 2014) /
Size A A / in / mm / B / in / mm / Order No.
3/4 “ 1/2 “ 2.500 / 63.5 / 1.000 / 25.4 / A04320200152XX
1“ 1/2 “ 2.625 / 66.7 / 1.125 / 28.6 / A04320250152XX
1“ 3/4 “ 2.625 / 66.7 / 1.125 / 28.6 / A04320250202XX
1 1/2 “ 1/2 “ 2.875 / 73.0 / 1.375 /34.9 / A04320400152XX
1 1/2 “ 3/4 “ 2.875 / 73.0 / 1.375 /34.9 / A04320400202XX
1 1/2 “ 1“ 2.875 / 73.0 / 1.375 /34.9 / A04320400252XX
2“ 1/2 “ 3.375 / 85.7 / 1.625 / 41.3 / A04320500152XX
2“ 3/4 “ 3.375 / 85.7 / 1.625 / 41.3 / A04320500202XX
2“ 1“ 3.375 / 85.7 / 1.625 / 41.3 / A04320500252XX
2“ 1 1/2 “ 3.375 / 85.7 / 1.625 / 41.3 / A04320500402XX
2 1/2 “ 1/2 “ 3.375 / 85.7 / 1.875 / 47.6 / A04320650152XX
2 1/2 “ 3/4 “ 3.375 / 85.7 / 1.875 / 47.6 / A04320650202XX
2 1/2 “ 1“ 3.375 / 85.7 / 1.875 / 47.6 / A04320650252XX
2 1/2 “ 1 1/2 “ 3.375 / 85.7 / 1.875 / 47.6 / A04320650402XX
2 1/2 “ 2“ 3.375 / 85.7 / 1.875 / 47.6 / A04320650502XX
3“ 1/2 “ 3.875 / 98.4 / 2.125 / 54.0 / A04320800152XX
3“ 3/4 “ 3.875 / 98.4 / 2.125 / 54.0 / A04320800202XX
3“ 1“ 3.875 / 98.4 / 2.125 / 54.0 / A04320800252XX
3“ 1 1/2 “ 3.875 / 98.4 / 2.125 / 54.0 / A04320800402XX
3“ 2“ 3.875 / 98.4 / 2.125 / 54.0 / A04320800502XX
3“ 2 1/2 “ 3.875 / 98.4 / 2.125 / 54.0 / A04320800652XX
4“ 1/2 “ 4.750 / 120.7 / 2.625 / 66.7 / A04321000152XX
4“ 3/4 “ 4.750 / 120.7 / 2.625 / 66.7 / A04321000202XX
4“ 1“ 4.750 / 120.7 / 2.625 / 66.7 / A04321000252XX
4“ 1 1/2 “ 4.750 / 120.7 / 2.625 / 66.7 / A04321000402XX
4“ 2“ 4.750 / 120.7 / 2.625 / 66.7 / A04321000502XX
4“ 2 1/2 “ 4.750 / 120.7 / 2.625 / 66.7 / A04321000652XX
4“ 3“ 4.750 / 120.7 / 2.625 / 66.7 / A04321000802XX
6“ 1/2 “ 7.125 /181.0 / 3.625 / 92.1 / A04321500152XX
6“ 3/4 “ 7.125 /181.0 / 3.625 / 92.1 / A04321500202XX
6“ 1“ 7.125 /181.0 / 3.625 / 92.1 / A04321500252XX
6“ 1 1/2 “ 7.125 /181.0 / 3.625 / 92.1 / A04321500402XX
6“ 2“ 7.125 /181.0 / 3.625 / 92.1 / A04321500502XX
6“ 2 1/2 “ 7.125 /181.0 / 3.625 / 92.1 / A04321500652XX
6“ 3“ 7.125 /181.0 / 3.625 / 92.1 / A04321500802XX
6“ 4“ 7.125 /181.0 / 3.750 / 95.3 / A04321501002XX

NOXTING s.r.o. Page: 24 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Concentric Reducer Short – Welded / DT-11 (BPE 2009) DT-4.1.3-1 (BPE 2014) /
Size X Size Y A / in / mm / Order No.
3/8 “ 1/4 “ 1.625 / 41.3 / A05420100082XX
1/2 “ 1/4 “ 1.875 / 47.6 / A05420150082XX
1/2 “ 3/8 “ 1.875 / 47.6 / A05420150102XX
3/4 “ 3/8 “ 2.000 / 50.8 / A05420200102XX
3/4 “ 1/2 “ 2.125 / 54.0 / A05420200152XX
1“ 3/8 “ 2.250 /57.2 / A05420250102XX
1“ 1/2 “ 2.500 / 63.5 / A05420250152XX
1“ 3/4 “ 2.125 / 54.0 / A05420250202XX
1 1/2 “ 3/8 “ 3.000 / 76.2 / A05420400102XX
1 1/2 “ 1/2 “ 2.750 / 69.9. / A05420400152XX
1 1/2 “ 3/4 “ 3.000 / 76.2 / A05420400202XX
1 1/2 “ 1“ 2.500 / 63.5 / A05420400252XX
2“ 1/2 “ 3.606 / 91.6 / A05420500152XX
2“ 3/4 “ 3.375 / 85.7 / A05420500202XX
2“ 1“ 3.375 / 85.7 / A05420500252XX
2“ 1 1/2 “ 2.500 / 63.5 / A05420500402XX
2 1/2 “ 1/2 “ 4.878 / 123.9 / A05420650152XX
2 1/2 “ 3/4 “ 4.625 / 117.5 / A05420650202XX
2 1/2 “ 1“ 4.625 / 117.5 / A05420650252XX
2 1/2 “ 1 1/2 “ 3.375 / 85.7 / A05420650402XX
2 1/2 “ 2“ 2.500 / 63.5 / A05420650502XX
3“ 1/2 “ 6.625 / 168.3 / A05420800152XX
3“ 3/4 “ 6.125 / 155.6 / A05420800202XX
3“ 1“ 5.625 / 142.9 / A05420800252XX
3“ 1 1/2 “ 4.255 / 108.0 / A05420800402XX
3“ 2“ 3.375 / 85.7 / A05420800502XX
3“ 2 1/2 “ 2.625 / 66.7 / A05420800652XX
4“ 1/2 “ 8.375 / 212.7 / A05421000152XX
4“ 3/4 “ 8.125 / 206.4 / A05421000202XX
4“ 1“ 7.375 / 187.3 / A05421000252XX
4“ 1 1/2 “ 6.375 / 161.9 / A05421000402XX
4“ 2“ 5.125 / 130.2 / A05421000502XX
4“ 2 1/2 “ 4.250 / 108.0 / A05421000652XX
4“ 3“ 3.875 / 98.4 / A05421000802XX
6“ 3“ 7.250 / 184.2 / A05421500802XX
6“ 4“ 5.625 / 142.9 / A05421501002XX

NOXTING s.r.o. Page: 25 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Concentric Reducer Long – Welded / DT-11 (BPE 2009) DT-4.1.3-1 (BPE 2014) /
Size X Size Y A / in / mm / Order No.
1/2 “ 1/4 “ 3.250 /82.6 / A05020150082XX
1/2 “ 3/8 “ 3.250 /82.6 / A05020150102XX
3/4 “ 3/8 “ 3.250 /82.6 / A05020200082XX
3/4 “ 1/2 “ 4.000 / 101.6 / A05020200152XX
1“ 3/8 “ 4.500 / 114.3 / A05020250102XX
1“ 1/2 “ 4.500 / 114.3 / A05020250152XX
1“ 3/4 “ 4.500 / 114.3 / A05020250202XX
1 1/2 “ 3/8 “ 4.000 / 101.6 / A05020400102XX
1 1/2 “ 1/2 “ 6.000 / 152.4 / A05020400152XX
1 1/2 “ 3/4 “ 5.550 / 139.7 / A05020400202XX
1 1/2 “ 1“ 5.000 / 127.0 / A05020400252XX
2“ 1/2 “ 7.750 / 196.9 / A05020500152XX
2“ 3/4 “ 7.250 / 184.2 / A05020500202XX
2“ 1“ 7.250 / 184.2 / A05020500252XX
2“ 1 1/2 “ 5.250 / 133.4 / A05020500402XX
2 1/2 “ 1/2 “ 9.750 / 247.7 / A05020650152XX
2 1/2 “ 3/4 “ 9.250 / 235.0 / A05020650202XX
2 1/2 “ 1“ 9.250 / 235.0 / A05020650252XX
2 1/2 “ 1 1/2 “ 7.250 / 184.2 / A05020650402XX
2 1/2 “ 2“ 5.550 / 139.7 / A05020650502XX
3“ 1/2 “ 13.250 / 336.6 / A05020800152XX
3“ 3/4 “ 12.250 / 311.2 / A05020800202XX
3“ 1“ 11.250 / 285.8 / A05020800252XX
3“ 1 1/2 “ 9.250 / 235.0 / A05020800402XX
3“ 2“ 7.500 / 190.5 / A05020800502XX
3“ 2 1/2 “ 5.550 / 139.7 / A05020800652XX
4“ 1/2 “ 17.500 / 444.5 / A05021000152XX
4“ 3/4 “ 16.500 / 419.1 / A05021000202XX
4“ 1“ 15.500 / 393.7 / A05021000252XX
4“ 1 1/2 “ 13.500 / 342.9 / A05021000402XX
4“ 2“ 11.750 / 298.5 / A05021000502XX
4“ 2 1/2 “ 9.750 / 247.5 / A05021000652XX
4“ 3“ 7.750 / 196.9 / A05021000802XX
6“ 3“ 10.000 / 254.0 / A05021500802XX
6“ 4“ 10.000 / 254.0 / A05021501002XX

NOXTING s.r.o. Page: 26 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Concentric Reducer Short - Weld/Clamp / DT-26 (BPE 2009) DT-4.1.3-2 (BPE 2014) /
Size X Size Y A – in / mm / Order No.
3/8 “ 1/4 “ 2,125 / 54.0 / A05320100082XX
1/2 “ 1/4 “ 2.375 / 60.3 / A05320150082XX
1/2 “ 3/8 “ 2.375 / 60.3 / A05320150102XX
3/4 “ 3/8 “ 2.500 / 63.5 / A05320200102XX
3/4 “ 1/2 “ 2.625 / 66.7 / A05320200152XX
1“ 3/8 “ 2.750 / 69.9 / A05320250102XX
1“ 1/2 “ 3.000 / 76.2 / A05320250152XX
1“ 3/4 “ 2.625 / 66.7 / A05320250202XX
1 1/2 “ 3/8 “ 3.500 / 88.9 / A05320400102XX
1 1/2 “ 1/2 “ 3.250 / 82.6 / A05320400152XX
1 1/2 “ 3/4 “ 3.500 / 88.9 / A05320400202XX
1 1/2 “ 1“ 3.000 / 76.2 / A05320400252XX
2“ 1/2 “ 4.105 / 104.3 / A05320500152XX
2“ 3/4 “ 3.875 / 98.4 / A05320500202XX
2“ 1“ 3.875 / 98.4 / A05320500252XX
2“ 1 1/2 “ 3.000 / 76.2 / A05320500402XX
2 1/2 “ 1/2 “ 5.378 / 136.6 / A05320650152XX
2 1/2 “ 3/4 “ 5.125 / 130.2 / A05320650202XX
2 1/2 “ 1“ 5.125 / 130.2 / A05320650252XX
2 1/2 “ 1 1/2 “ 3.875 / 98.4 / A05320650402XX
2 1/2 “ 2“ 3.000 / 76.2 / A05320650502XX
3“ 1/2 “ 7.125 / 181.0 / A05320800152XX
3“ 3/4 “ 6.625 / 168.3 / A05320800202XX
3“ 1“ 6.125 / 155.6 / A05320800252XX
3“ 1 1/2 “ 4.750 / 120.7 / A05320800402XX
3“ 2“ 3.875 / 98.4 / A05320800502XX
3“ 2 1/2 “ 3.125 / 79.4 / A05320800652XX
4“ 1/2 “ 8.995 / 228.5 / A05321000152XX
4“ 3/4 “ 8.750 / 222.2 / A05321000202XX
4“ 1“ 7.995 / 203.1 / A05321000252XX
4“ 1 1/2 “ 6.995 / 177.7 / A05321000402XX
4“ 2“ 5.750 / 146.1 / A05321000502XX
4“ 2 1/2 “ 4.875 / 123.8 / A05321000652XX
4“ 3“ 4.500 / 114.3 / A05321000802XX
6“ 3“ 8.000 / 203.2 / A05321500802XX
6“ 4“ 6.375 / 161.9 / A05321501002XX

NOXTING s.r.o. Page: 27 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Concentric Reducer Long - Weld/Clamp / DT-26 (BPE 2009) DT-4.1.3-2 (BPE 2014) /
Size X Size Y A / in / mm / Order No.
3/4 “ 1/2 “ 3.000 / 76.2 / A05120200152XX
1“ 1/2 “ 3.500 / 88.9 / A05120250152XX
1“ 3/4 “ 3.000 / 76.2 / A05120250202XX
1 1/2 “ 1/2 “ 4.500 / 114.3 / A05120400152XX
1 1/2 “ 3/4 “ 4.000 / 101.6 / A05120400202XX
1 1/2 “ 1“ 4.000 / 101.6 / A05120400252XX
2“ 1/2 “ 6.500 / 165.1 / A05120500152XX
2“ 3/4 “ 6.000 / 152.4 / A05120500202XX
2“ 1“ 6.000 / 152.4 / A05120500252XX
2“ 1 1/2 “ 4.000 / 101.6 / A05120500402XX
2 1/2 “ 1“ 8.000 / 203.2 / A05120650252XX
2 1/2 “ 1 1/2 “ 6.000 / 152.4 / A05120650402XX
2 1/2 “ 2“ 4.248 / 107.9 / A05120650502XX
3“ 1“ 10.000 / 254.0 / A05120800252XX
3“ 1 1/2 “ 8.000 / 203.2 / A05120800402XX
3“ 2“ 6.250 / 158.8 / A05120800502XX
3“ 2 1/2 “ 4.250 / 108.0 / A05120800652XX
4“ 1“ 14.125 / 358.8 / A05121000252XX
4“ 1 1/2 “ 12.125 / 308.0 / A05121000402XX
4“ 2“ 10.375 / 263.5 / A05121000502XX
4“ 2 1/2 “ 8.375 / 212.7 / A05121000652XX
4“ 3“ 6.375 / 161.9 / A05121000802XX
6“ 3“ 9.000 / 228.6 / A05121500802XX
6“ 4“ 9.000 / 228.6 / A05121501002XX

NOXTING s.r.o. Page: 28 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Concentric Reducer Short – Clamp / DT-21 (BPE 2009) DT-4.1.3-3 (BPE 2014) /
Size X Size Y A / in / mm / Order No.
3/4 “ 1/2 “ 2.000 / 50.8 / A05220200152XX
1“ 1/2 “ 2.500 / 63.5 / A05220250152XX
1“ 3/4 “ 2.000 / 50.8 / A05220250202XX
1 1/2 “ 1/2 “ 3.500 / 88.9 / A05220400152XX
1 1/2 “ 3/4 “ 3.000 / 76.2 / A05220400202XX
1 1/2 “ 1“ 3.000 / 76.2 / A05220400252XX
2“ 1/2 “ 5.500 / 139.7 / A05220500152XX
2“ 3/4 “ 5.000 / 127.0 / A05220500202XX
2“ 1“ 5.000 / 127.0 / A05220500252XX
2“ 1 1/2 “ 3.000 / 76.2 / A05220500402XX
2 1/2 “ 1/2 “ 7.500 / 190.5 / A05220650152XX
2 1/2 “ 3/4 “ 7.000 / 177.8 / A05220650202XX
2 1/2 “ 1“ 7.000 / 177.8 / A05220650252XX
2 1/2 “ 1 1/2 “ 5.000 / 127.0 / A05220650402XX
2 1/2 “ 2“ 3.000 / 76.2 / A05220650502XX
3“ 1“ 9.000 / 228.6 / A05220800252XX
3“ 1 1/2 “ 7.000 / 177.8 / A05220800402XX
3“ 2“ 5.000 / 127.0 / A05220800502XX
3“ 2 1/2 “ 3.000 / 76.2 / A05220800652XX
4“ 1“ 13.125 /333.4 / A05221000252XX
4“ 1 1/2 “ 11.125 / 282.6 / A05221000402XX
4“ 2“ 9.125 / 231.8 / A05221000502XX
4“ 2 1/2 “ 7.125 / 181.0 / A05221000652XX
4“ 3“ 5.125 / 130.2 / A05221000802XX
6“ 3“ 7.500 / 190.5 / A05221500802XX
6“ 4“ 7.625/ 193.7 / A05221501002XX

NOXTING s.r.o. Page: 29 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Concentric Reducer Short – Clamp / DT-21 (BPE 2009) DT-4.1.3-3 (BPE 2014) /
Size X Size Y A – in / mm / Order No.
3/8 “ 1/4 “ 2.625 / 66.7 / A05520100082XX
1/2 “ 1/4 “ 2.874 / 73.0 / A05520150082XX
1/2 “ 3/8 “ 2.874 / 73.0 / A05520150102XX
3/4 “ 3/8 “ 3.000 / 76.2 / A05520200102XX
3/4 “ 1/2 “ 3.125 / 79.4 / A05520200152XX
1“ 3/8 “ 3.244 / 82.6 / A05520250102XX
1“ 1/2 “ 3.500 / 88.9 / A05520250152XX
1“ 3/4 “ 3.125 / 79.4 / A05520250202XX
1 1/2 “ 3/8 “ 4.000 / 101.6 / A05520400102XX
1 1/2 “ 1/2 “ 3.751 / 95.3 / A05520400152XX
1 1/2 “ 3/4 “ 4.000 / 101.6 / A05520400202XX
1 1/2 “ 1“ 3.500 / 88.9 / A05520400252XX
2“ 1/2 “ 4.606 / 117.0 / A05520500152XX
2“ 3/4 “ 4.374 / 111.1 / A05520500202XX
2“ 1“ 4.374 / 111.1 / A05520500252XX
2“ 1 1/2 “ 3.500 / 88.9 / A05520500402XX
2 1/2 “ 1/2 “ 5.877 / 149.3 / A05520650152XX
2 1/2 “ 3/4 “ 5.625 / 142.9 / A05520650202XX
2 1/2 “ 1“ 5.625 / 142.9 / A05520650252XX
2 1/2 “ 1 1/2 “ 4.374 / 111.1 / A05520650402XX
2 1/2 “ 2“ 3.500 / 88.9 / A05520650502XX
3“ 1/2 “ 7.625 / 193.7 / A05520800152XX
3“ 3/4 “ 7.125 / 181.0 / A05520800202XX
3“ 1“ 6.625 / 168.3 / A05520800252XX
3“ 1 1/2 “ 5.251 / 133.4 / A05520800402XX
3“ 2“ 4.374 / 111.1 / A05520800502XX
3“ 2 1/2 “ 3.625 / 92.1 / A05520800652XX
4“ 1/2 “ 9.496 / 241.2 / A05521000152XX
4“ 3/4 “ 9.248 / 234.9 / A05521000202XX
4“ 1“ 8.496 / 215.8 / A05521000252XX
4“ 1 1/2 “ 7.496 / 190.4 / A05521000402XX
4“ 2“ 6.236 / 158.4 / A05521000502XX
4“ 2 1/2 “ 5.374 / 136.5 / A05521000652XX
4“ 3“ 5.000 / 127 / A05521000802XX
6“ 3“ 8.500 / 215.9 / A05521500802XX
6“ 4“ 7.000 /177.8 / A05521501002XX

NOXTING s.r.o. Page: 30 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Eccentric Reducer Short - Welded / DT-11 (BPE 2009) DT-4.1.3-1 (BPE 2014) /
Size X Size Y A / in / mm / Order No.
3/8 “ 1/4 “ 1.625 / 41.3 / A06020100082XX
1/2 “ 1/4 “ 1.875 / 47.6 / A06020150082XX
1/2 “ 3/8 “ 1.875 / 47.6 / A06020150102XX
3/4 “ 3/8 “ 2.000 / 50.8 / A06020200102XX
3/4 “ 1/2 “ 2.125 / 54.0 / A06020200152XX
1“ 3/8 “ 2.250 /57.2 / A06020250102XX
1“ 1/2 “ 2.500 / 63.5 / A06020250152XX
1“ 3/4 “ 2.125 / 54.0 / A06020250202XX
1 1/2 “ 3/8 “ 3.000 / 76.2 / A06020400102XX
1 1/2 “ 1/2 “ 2.750 / 69.9. / A06020400152XX
1 1/2 “ 3/4 “ 3.000 / 76.2 / A06020400202XX
1 1/2 “ 1“ 2.500 / 63.5 / A06020400252XX
2“ 1/2 “ 3.606 / 91.6 / A06020500152XX
2“ 3/4 “ 3.375 / 85.7 / A06020500202XX
2“ 1“ 3.375 / 85.7 / A06020500252XX
2“ 1 1/2 “ 2.500 / 63.5 / A06020500402XX
2 1/2 “ 1/2 “ 4.878 / 123.9 / A06020650152XX
2 1/2 “ 3/4 “ 4.625 / 117.5 / A06020650202XX
2 1/2 “ 1“ 4.625 / 117.5 / A06020650252XX
2 1/2 “ 1 1/2 “ 3.375 / 85.7 / A06020650402XX
2 1/2 “ 2“ 2.500 / 63.5 / A06020650502XX
3“ 1/2 “ 6.625 / 168.3 / A06020800152XX
3“ 3/4 “ 6.125 / 155.6 / A06020800202XX
3“ 1“ 5.625 / 142.9 / A06020800252XX
3“ 1 1/2 “ 4.255 / 108.0 / A06020800402XX
3“ 2“ 3.375 / 85.7 / A06020800502XX
3“ 2 1/2 “ 2.625 / 66.7 / A06020800652XX
4“ 1/2 “ 8.375 / 212.7 / A06021000152XX
4“ 3/4 “ 8.125 / 206.4 / A06021000202XX
4“ 1“ 7.375 / 187.3 / A06021000252XX
4“ 1 1/2 “ 6.375 / 161.9 / A06021000402XX
4“ 2“ 5.125 / 130.2 / A06021000502XX
4“ 2 1/2 “ 4.250 / 108.0 / A06021000652XX
4“ 3“ 3.875 / 98.4 / A06021000802XX
6“ 3“ 7.250 / 184.2 / A06021500802XX
6“ 4“ 5.625 / 142.9 / A06021501002XX

NOXTING s.r.o. Page: 31 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Eccentric Reducer Long - Welded / DT-11 (BPE 2009) DT-4.1.3-1 (BPE 2014) /
Size X Size Y A / in / mm / Order No.
1/2 “ 3/8 “ 3.250 / 82.6 / A06320150102XX
3/4 “ 3/8 “ 3.250 / 82.6 / A06320200082XX
3/4 “ 1/2 “ 4.000 / 101.6 / A06320200152XX
1“ 3/8 “ 4.500 / 114.3 / A06320250102XX
1“ 1/2 “ 4.500 / 114.3 / A06320250152XX
1“ 3/4 “ 4.500 / 114.3 / A06320250202XX
1 1/2 “ 3/8 “ 4.000 / 101.6 / A06320400102XX
1 1/2 “ 1/2 “ 6.000 / 152.4 / A06320400152XX
1 1/2 “ 3/4 “ 5.550 / 139.7 / A06320400202XX
1 1/2 “ 1“ 5.000 / 127.0 / A06320400252XX
2“ 1/2 “ 7.750 / 196.9 / A06320500152XX
2“ 3/4 “ 7.250 / 184.2 / A06320500202XX
2“ 1“ 7.250 / 184.2 / A06320500252XX
2“ 1 1/2 “ 5.250 / 133.4 / A06320500402XX
2 1/2 “ 1/2 “ 9.750 / 247.7 / A06320650152XX
2 1/2 “ 3/4 “ 9.250 / 235.0 / A06320650202XX
2 1/2 “ 1“ 9.250 / 235.0 / A06320650252XX
2 1/2 “ 1 1/2 “ 7.250 / 184.2 / A06320650402XX
2 1/2 “ 2“ 5.550 / 139.7 / A06320650502XX
3“ 1/2 “ 13.250 / 336.6 / A06320800152XX
3“ 3/4 “ 12.250 / 311.2 / A06320800202XX
3“ 1“ 11.250 / 285.8 / A06320800252XX
3“ 1 1/2 “ 9.250 / 235.0 / A06320800402XX
3“ 2“ 7.500 / 190.5 / A06320800502XX
3“ 2 1/2 “ 5.550 / 139.7 / A06320800652XX
4“ 1/2 “ 17.500 / 444.5 / A06321000152XX
4“ 3/4 “ 16.500 / 419.1 / A06321000202XX
4“ 1“ 15.500 / 393.7 / A06321000252XX
4“ 1 1/2 “ 13.500 / 342.9 / A06321000402XX
4“ 2“ 11.750 / 298.5 / A06321000502XX
4“ 2 1/2 “ 9.750 / 247.5 / A06321000652XX
4“ 3“ 7.750 / 196.9 / A06321000802XX
6“ 3“ 10.000 / 254.0 / A06321500802XX
6“ 4“ 10.000 / 254.0 / A06321501002XX

NOXTING s.r.o. Page: 32 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Eccentric Reducer Short - Weld/Clamp / DT-26 (BPE 2009) DT-4.1.3-2 (BPE 2014) /
Size X Size Y A / in / mm / Order No.
3/8 “ 1/4 “ 2,125 / 54.0 / A06120100082XX
1/2 “ 1/4 “ 2.375 / 60.3 / A06120150082XX
1/2 “ 3/8 “ 2.375 / 60.3 / A06120150102XX
3/4 “ 3/8 “ 2.500 / 63.5 / A06120200102XX
3/4 “ 1/2 “ 2.625 / 66.7 / A06120200152XX
1“ 3/8 “ 2.750 / 69.9 / A06120250102XX
1“ 1/2 “ 3.000 / 76.2 / A06120250152XX
1“ 3/4 “ 2.625 / 66.7 / A06120250202XX
1 1/2 “ 3/8 “ 3.500 / 88.9 / A06120400102XX
1 1/2 “ 1/2 “ 3.250 / 82.6 / A06120400152XX
1 1/2 “ 3/4 “ 3.500 / 88.9 / A06120400202XX
1 1/2 “ 1“ 3.000 / 76.2 / A06120400252XX
2“ 1/2 “ 4.105 / 104.3 / A06120500152XX
2“ 3/4 “ 3.875 / 98.4 / A06120500202XX
2“ 1“ 3.875 / 98.4 / A06120500252XX
2“ 1 1/2 “ 3.000 / 76.2 / A06120500402XX
2 1/2 “ 1/2 “ 5.378 / 136.6 / A06120650152XX
2 1/2 “ 3/4 “ 5.125 / 130.2 / A06120650202XX
2 1/2 “ 1“ 5.125 / 130.2 / A06120650252XX
2 1/2 “ 1 1/2 “ 3.875 / 98.4 / A06120650402XX
2 1/2 “ 2“ 3.000 / 76.2 / A06120650502XX
3“ 1/2 “ 7.125 / 181.0 / A06120800152XX
3“ 3/4 “ 6.625 / 168.3 / A06120800202XX
3“ 1“ 6.125 / 155.6 / A06120800252XX
3“ 1 1/2 “ 4.750 / 120.7 / A06120800402XX
3“ 2“ 3.875 / 98.4 / A06120800502XX
3“ 2 1/2 “ 3.125 / 79.4 / A06120800652XX
4“ 1/2 “ 8.995 / 228.5 / A06121000152XX
4“ 3/4 “ 8.750 / 222.2 / A06121000202XX
4“ 1“ 7.995 / 203.1 / A06121000252XX
4“ 1 1/2 “ 6.995 / 177.7 / A06121000402XX
4“ 2“ 5.750 / 146.1 / A06121000502XX
4“ 2 1/2 “ 4.875 / 123.8 / A06121000652XX
4“ 3“ 4.500 / 114.3 / A06121000802XX
6“ 3“ 8.000 / 203.2 / A06121500802XX
6“ 4“ 6.375 / 161.9 / A06121501002XX

NOXTING s.r.o. Page: 33 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Eccentric Reducer Long - Weld/Clamp / DT-26 (BPE 2009) DT-4.1.3-2 (BPE 2014) /
Size X Size Y A / in / mm / Order No.
3/4 “ 1/2 “ 3.000 / 76.2 / A05120200152XX
1“ 1/2 “ 3.500 / 88.9 / A05120250152XX
1“ 3/4 “ 3.000 / 76.2 / A05120250202XX
1 1/2 “ 1/2 “ 4.500 / 114.3 / A05120400152XX
1 1/2 “ 3/4 “ 4.000 / 101.6 / A05120400202XX
1 1/2 “ 1“ 4.000 / 101.6 / A05120400252XX
2“ 1/2 “ 6.500 / 165.1 / A05120500152XX
2“ 3/4 “ 6.000 / 152.4 / A05120500202XX
2“ 1“ 6.000 / 152.4 / A05120500252XX
2“ 1 1/2 “ 4.000 / 101.6 / A05120500402XX
2 1/2 “ 1“ 8.000 / 203.2 / A05120650252XX
2 1/2 “ 1 1/2 “ 6.000 / 152.4 / A05120650402XX
2 1/2 “ 2“ 4.248 / 107.9 / A05120650502XX
3“ 1“ 10.000 / 254.0 / A05120800252XX
3“ 1 1/2 “ 8.000 / 203.2 / A05120800402XX
3“ 2“ 6.250 / 158.8 / A05120800502XX
3“ 2 1/2 “ 4.250 / 108.0 / A05120800652XX
4“ 1“ 14.125 / 358.8 / A05121000252XX
4“ 1 1/2 “ 12.125 / 308.0 / A05121000402XX
4“ 2“ 10.375 / 263.5 / A05121000502XX
4“ 2 1/2 “ 8.375 / 212.7 / A05121000652XX
4“ 3“ 6.375 / 161.9 / A05121000802XX
6“ 3“ 8.750 / 222.3 / A05121500802XX
6“ 4“ 9.000 / 228.6 / A05121501002XX

NOXTING s.r.o. Page: 34 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Eccentric Reducer Short - Clamp / DT-21 (BPE 2009) DT-4.1.3-3 (BPE 2014) /
Size X Size Y A / in / mm / Order No.
3/4 “ 1/2 “ 2.000 / 50.8 / A05220200152XX
1“ 1/2 “ 2.500 / 63.5 / A05220250152XX
1“ 3/4 “ 2.000 / 50.8 / A05220250202XX
1 1/2 “ 1/2 “ 3.500 / 88.9 / A05220400152XX
1 1/2 “ 3/4 “ 3.000 / 76.2 / A05220400202XX
1 1/2 “ 1“ 3.000 / 76.2 / A05220400252XX
2“ 1/2 “ 5.500 / 139.7 / A05220500152XX
2“ 3/4 “ 5.000 / 127.0 / A05220500202XX
2“ 1“ 5.000 / 127.0 / A05220500252XX
2“ 1 1/2 “ 3.000 / 76.2 / A05220500402XX
2 1/2 “ 1/2 “ 7.500 / 190.5 / A05220650152XX
2 1/2 “ 3/4 “ 7.000 / 177.8 / A05220650202XX
2 1/2 “ 1“ 7.000 / 177.8 / A05220650252XX
2 1/2 “ 1 1/2 “ 5.000 / 127.0 / A05220650402XX
2 1/2 “ 2“ 3.000 / 76.2 / A05220650502XX
3“ 1“ 9.000 / 228.6 / A05220800252XX
3“ 1 1/2 “ 7.000 / 177.8 / A05220800402XX
3“ 2“ 5.000 / 127.0 / A05220800502XX
3“ 2 1/2 “ 3.000 / 76.2 / A05220800652XX
4“ 1“ 13.125 /333.4 / A05221000252XX
4“ 1 1/2 “ 11.125 / 282.6 / A05221000402XX
4“ 2“ 9.125 / 231.8 / A05221000502XX
4“ 2 1/2 “ 7.125 / 181.0 / A05221000652XX
4“ 3“ 5.125 / 130.2 / A05221000802XX
6“ 3“ 7.625 / 193.7 / A05221500802XX
6“ 4“ 7.625/ 193.7 / A05221501002XX

NOXTING s.r.o. Page: 35 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 Eccentric Reducer Long – Clamp / DT-21 (BPE 2009) DT-4.1.3-3 (BPE 2014) /
Size X Size Y A / in / mm / Order No.
3/8 “ 1/4 “ 2.625 / 66.7 / A06220100082XX
1/2 “ 1/4 “ 2.874 / 73.0 / A06220150082XX
1/2 “ 3/8 “ 2.874 / 73.0 / A06220150102XX
3/4 “ 3/8 “ 3.000 / 76.2 / A06220200102XX
3/4 “ 1/2 “ 3.125 / 79.4 / A06220200152XX
1“ 3/8 “ 3.244 / 82.6 / A06220250102XX
1“ 1/2 “ 3.500 / 88.9 / A06220250152XX
1“ 3/4 “ 3.125 / 79.4 / A06220250202XX
1 1/2 “ 3/8 “ 4.000 / 101.6 / A06220400102XX
1 1/2 “ 1/2 “ 3.751 / 95.3 / A06220400152XX
1 1/2 “ 3/4 “ 4.000 / 101.6 / A06220400202XX
1 1/2 “ 1“ 3.500 / 88.9 / A06220400252XX
2“ 1/2 “ 4.606 / 117.0 / A06220500152XX
2“ 3/4 “ 4.374 / 111.1 / A06220500202XX
2“ 1“ 4.374 / 111.1 / A06220500252XX
2“ 1 1/2 “ 3.500 / 88.9 / A06220500402XX
2 1/2 “ 1/2 “ 5.877 / 149.3 / A06220650152XX
2 1/2 “ 3/4 “ 5.625 / 142.9 / A06220650202XX
2 1/2 “ 1“ 5.625 / 142.9 / A06220650252XX
2 1/2 “ 1 1/2 “ 4.374 / 111.1 / A06220650402XX
2 1/2 “ 2“ 3.500 / 88.9 / A06220650502XX
3“ 1/2 “ 7.625 / 193.7 / A06220800152XX
3“ 3/4 “ 7.125 / 181.0 / A06220800202XX
3“ 1“ 6.625 / 168.3 / A06220800252XX
3“ 1 1/2 “ 5.251 / 133.4 / A06220800402XX
3“ 2“ 4.374 / 111.1 / A06220800502XX
3“ 2 1/2 “ 3.625 / 92.1 / A06220800652XX
4“ 1/2 “ 9.496 / 241.2 / A06221000152XX
4“ 3/4 “ 9.248 / 234.9 / A06221000202XX
4“ 1“ 8.496 / 215.8 / A06221000252XX
4“ 1 1/2 “ 7.496 / 190.4 / A06221000402XX
4“ 2“ 6.236 / 158.4 / A06221000502XX
4“ 2 1/2 “ 5.374 / 136.5 / A06221000652XX
4“ 3“ 5.000 / 127 / A06221000802XX
6“ 3“ 8.500 / 215.9 / A06221500802XX
6“ 4“ 7.000 /177.8 / A06221501002XX

NOXTING s.r.o. Page: 36 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
Comment

NOXTING s.r.o. Page: 37 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1
 NOXTING s.r.o.
[email protected]
www.noxting.com

Copyright © 2019 NOXTING s.r.o., All rights reserved

NOXTING s.r.o. Page: 38 / 38 E [email protected]

W www.noxting.com
N-CC-2-1906-r1