Butterfly Valve

‘We do not sell a product, but provide you a solution’

There are a lot of products in the world, but it is difficult to find the optimum
taste product. Always, we preserve our efforts in order to grasp what our
customer needs and furnish the optimum solution.

To have a thorough grasp of the requirement, we listen to our customer

with strained ear and have an open mind so that we can make better com-
munication with him. In addition, so as to offer a suitable solution, we are
fully furnished with a variety of products and spare no effort to develop new
products which are optimally tailored to customer needs and desires.

We dare to be proud of that we are your optimum answer.

 Your faithfully, All the staff of DK

Index
•Certificates 3
•Butterfly Valve Sealing Principle 4
•Triple-Eccentric Butterfly Valve 6
•Double-Eccentric Butterfly Valve 12
•Waterworks Butterfly Valve 18
•Butterfly Check Valve 22
•Concentric Butterfly Valves 24
•Butterfly Valve for Marine (JIS F7480) / 32
Long face-to-face dimension
•Lined Butterfly Valve 34
•Cartridge Rubber Butterfly Valve 38
CLASS 300 with Full Lined Body
•Operating Options 40
•Engineering Data 44

Certificates
- ISO 9001 : 2008
- CE PED Certificate of Conformity
- Fire Safe API 607
- ABS Product Design Assessment
- ABS Manufacturing Assessment
- ABS Type Approval

Certificate Number: 12-BK926705-PDA

08/JAN/2017

Pacific Technical Service Co., Ltd.

Cobiz Plaza B-1, # 130-10 Samsung-Dong, Gangnam-Gu, Seoul, Korea
Tel
G : 82-2-418-4209
Fax : 82-2-567-3117
G
e-mail : patech@[Link]
G G
Confirmation of Product Type Approval G
Please refer to the "Service Restrictions" shown below to determine if Unit Certification is required for this product. G
%XWWHUIO\9DOYH3HUIRUPDQFH7HVW&HUWLILFDWH
This certificate reflects the information on the product in the ABS Records as of the date and time the certificate is
G
printed.
Pursuant to the Rules of the American Bureau of Shipping (ABS), the manufacturer of the below listed product held G
a valid Manufacturing Assessment (MA) with expiration date of 06-SEP-2017. The continued validity of the G Certificate No. TS-2009-10-03-FT-DK-150-2 Date : Oct. 28, 2009
Manufacturing Assessment is dependent on completion of satisfactory audits as required by the ABS Rules.
G
And; a Product Design Assessment (PDA) valid until subject to continued compliance with the Rules or standards
used in the evaluation of the product. Applicant / Manufacturer : DK Valve Co., Ltd.
The above entitle the product to be called Product Type Approved. Kind of test : Fire safe test
The Product Design Assessment is valid for products intended for use on ABS classed vessels, MODUs or facilities Test item : Butterfly Valve 2”–150 Lbs Wafer, Concentric 1 unit
which are in existence or under contract for construction on the date of the ABS Rules used to evaluate the
Product. A216 WCB Body, A351 CF8 Disc
ABS makes no representations regarding Type Approval of the Product for use on vessels, MODUs or facilities PTFE Seat Ring, A240 T304 Seat Retainer
built after the date of the ABS Rules used for this evaluation.
A276 T304 Stem, 304+PTFE Upper/Lower Bush,
Due to wide variety of specifications used in the products ABS has evaluated for Type Approval, it is part of our
contract that; whether the standard is an ABS Rule or a non-ABS Rule, the Client has full responsibility for A276 T304+Graphite Stem Packing
continued compliance with the standard. Design standard : API 609:7th:Oct. 2009 Category A
Product Name: Valve, Butterfly Test standard : API 607:5th:June 2005
Model Name(s): CRB Series, HFC Series
Presented to:
DK VALVE CO., LTD. - HWAJEON FACTORY This is to certify that the fire test has been performed by the manufacturer under
143 DAEJEOJUNGANG-RO 286 BEON-GIL
GANGSEO-GU
our witness as above, and the results are satisfied with the requirements of API
Korea, Republic of 607 for the above product, so we hereby confirm the qualification of valves of
Intended Service: Cargo Oil, Bilge, Ballast, Sea Water/Fresh Water, Air Venting, Inert Gas, Heavy
150 Lbs through 300 Lbs rating (PN10, 16, 25, 40) with 2” and below, 2-1/2”,
Fuel Oil, Diesel Oil, Lube Oil, Hydraulic Oil 3”, 4” size per API 607 - Clause 7.3 & 7.4.
Description: CRB Series 1. Body : FC/FCD/SC/SCS/BC/ALBC 2. Disc : SCS/BC/ALBC 3. Seat
Ring : EPDM/NBR/VITON 4. Stem/Disc bolt : SUS 5. O-Ring/Packing : NBR 6.
Packing grand : ACETAL 7. Hand wheel : AD3 8. Indicator : Plastic HFC Series 1. Note
Body/End cover : SC/SCS/BC/ALBC 2. Disc : SCS/BC/ALBC 3. Seat Ring : This certificate reflects only our witnessing findings at the time and place of test and
TEFLON/RUBBER 4. Retainer/Grand flange/Stand : SS400 5.
Stem/Plate/Collar/Grand bolt and nut/Lock pin : SUS 6. Gasket/Packing : Teflon 7. does not refer to any other matters.
Bush : Oilless B/R 8. Grand ring : BC6 9. O-Ring/Packing : NBR 10. Packing Grand
: ACETAL 11. Hand Wheel : AD3 12. Indicator : Plastic G
Tier: 3
Ratings: CRB Series Nominal Diameter : 50mm, 65mm, 80mm, 100mm, 125mm, 150mm, Pacific Technical Service Co., Ltd.
200mm, 250mm, 300mm , 350mm, 400mm, 450mm, 500mm, 600mm 5 Kg/cm2,
10 Kg/cm2, 150LB(10.5Kg/cm2) Intended Temperature : 0 ~ 120 Deg.C HFC
Series Nominal Diameter : 100mm, 125mm, 150mm, 200mm, 250mm, 300mm,
350mm, 400mm, 450mm, 500mm, 550nn, 600mm 5Kg/cm2, 10 Kg/cm2, 16
Kg/cm2, 20 Kg/cm2, 150LB(10.5Kg/cm2), 300LB(21.0Kg/cm2) Intended S. H. Koo / Manager, Industrial Service Dept.
Temperature : 0 ~ 120 Deg.C G
The issue of this certificate shall not relieve the Supplier or Manufacturer from any responsibility or such
Service Restrictions: Unit Certification is not required for this product. If the manufacturer or purchaser
guarantees as may be arranged, nor no interpreted so as in any way to imply acceptance of such products.
request an ABS Certificate for compliance with a specification or standard, the
Neither Pacific Technical Service Co., Ltd. be held responsible in any way whatever the technical
accuracy and contents of the purchaser’s order.G
01/08/2017 [Link] PM Copyright 2001 American Bureau of Shipping. All rights reserved. Page 1 of 2
 Butterfly Valve Sealing Principle

A butterfly valve is constructed to centered seal, single eccentric, double eccentric and triple eccentric seal.
The sealing principles of those structures are illustrate as below.

● Centered seal butterfly valve

With the disc seal center of butterfly valve and rotation center
of stem overlapped, sealing load will be produced between the Body
sealing faces of seat and disc under certain magnitude of in-
terference, thus to ensure effective seal of valve. Lined with Disc

rubber on body, this structure is applicable for medium and Stem

small-bore butterfly valves. Due to the deformation under ex-
Sealing Face
trusion, during the process of opening and closing, the disc is
Sealing Face Interference Drawing
always under extrusion. So, the upper and lower valve shafts
are seriously extruded, which can be bad to the service life of
the valve. And, the open-close moment of the valve is relatively
high. The defect is that disc and seat are always under extru-
sion, scratch, high resistance and serious abrasion. To over- Sealing Structure of
come extrusion and scratch and to ensure good sealing Centered Seal Butterfly Valve
performance, the seat basically uses rubber or other elastic ma-
terials.

● Single eccentric butterfly valve

A-A
Disc Open-Position
The rotation center of the disc (namely center of valve shaft)
and the sealing section of the disc form up an ‘a’ eccentric, mak- Body Valve Shaft
ing disc sealing face gradually disengaged from seat sealing Centerline
Disc
face. Once the disc turns to 15° ~ 25°, the disc sealing face will Stem
be completely disengaged from the seat sealing face. Once
fully opened, a gap ‘X’ will be formed up between the two seal- Body Centerline
Sealing section
ing faces, making the relative mechanical wear and extrusion
Disc Sealing
between the two sealing faces greatly lowered during the Sealring Ring
Excircle
process of open and close, thus to ensure the seal of butterfly
valve. However, as the scratch between the disc and seat does
not disappear during the whole process of open and close,
they are almost similar to concentric butterfly valves in the area Sealing Structure of Single
of application, this is why they have not been popularly used. Eccentric Seal Butterfly Valve

04 [Link]
 Butterfly Valve Sealing Principle

● Double eccentric butterfly valve

Body
The rotation center of the disc (namely the center of valve Valve Shaft
Disc
shaft) and the centerline of body form up a ‘b’ eccentric on Centerline

the base of single eccentric butterfly valve, making the seal- Sealing Ring
Body Centerline
ing face of disc disengaged from seat sealing face more
quickly than single eccentric butterfly valves during the The central Line
process of open and close. Once the disc turns to 8° ~ 12°, of the valve bush

the disc sealing face will be completely disengaged from Sealing section
the seat sealing face. Once fully opened, a gap ‘Y’ will be
formed up between the two sealing faces. This type of but-
terfly valves are designed to have greatly lowered the me- Sealing Structure of Double
Eccentric Seal Butterfly Valve
chanical wear and extrusion deformation between the two
sealing faces, making the sealing performance of butterfly valve much better.
The characteristic of this structure is to make stem axis not only deviated from the center of the disc, but also the
center of the body. The effect of double eccentric is that, when a valve is opened, the disc can be quickly disengaged
from the seat, thus to greatly eliminate the unnecessary excessive extrusion and scratch between the disc and seat,
reduce opening resistance, lower the abrasion and improve the service life of the seat. As scratch has been greatly
lowered, metal seat can be used for a double eccentric butterfly valve, so that butterfly valves are able to be used in
high temperature. However, as its seal is positioned sealing construction, i.e. the sealing face between the disc and
seat is lineal contact, disc extruding seat to produce elastic deformation, thus to effect the sealing performance. This
has high requirement on close position, especially for those with metal seat, and is given poor pressure endurance.

● Triple eccentric butterfly valve

A β eccentric is formed up between Body

the centerline of the seat and the cen- Valve Shaft

Disc Centerline
terline of the body on the base of a
Sealing Ring
double eccentric butterfly valve, mak- Disc Centerline
ing the disc sealing face immediately
disengaged from the seat sealing Body Centerline
face upon the opening of a butterfly
valve, and in close contact with the Sealing section
seat sealing face upon closing.
When fully opened, a gap ‘Y’, which is Close State Diagram of Open State Diagram of
Triple Eccentric Seal Butterfly Valve Triple Eccentric Seal Butterfly Valve
the same as that in a double eccentric
butterfly valve, is formed up between Sealing Principle of Triple Eccentric Seal Butterfly Valve
the two sealing faces. The design of
this type of valves has thoroughly eliminated the mechanical wear and scratch between the two sealing faces, making
the sealing performance and service life of butterfly valves greatly improved. When a valve is closed, with the sealing
ring under the extrusion of the body sealing face and disc, two upward elastic deformations are produced. The sealing
face is fallen under outward tension at long shaft and inward compressive stress at short shaft. The long and short
shafts produce elastic deformation of different directions, thus to maximize the sealing force between the sealing
faces of the valve. This distinctive eccentric combination not only uses cam effect, but also eliminates friction com-
pletely, thus to ensure no friction between the seat and the sealing ring on the disc during the 90° stroke of the valve,
a perfect solution to clear away the possibilities of abrasion and leakage.

Butterfly Valve Sealing Principle 05

 Triple-Eccentric Butterfly Valve

Standard Specifications

● DESIGN
API 609 Cat. B
ASME B 16.34

● FACE TO FACE
API 609 Cat. B
Wafer and Lugged
Double flange Short/Long

● FLANGE STANDARD
ASME B 16.5/16.47
BS 4504/EN 1092-1
JIS B2220
Others on request

● PRESSURE RATING
ASME B 16.34
Class 150/300/600
Class 900/1500

● NOMINAL DIAMETER
3” to 144”
DN 80 to 3600

● OTHER OPTIONS
Anti-static device
Cryogenic design
Others on request

● TESTING
API 598
ASME B 16.104/FCI 70-2
ISO 5208

Applicable Materials
Carbon Steel A105, A216 WCB/WCC/WC6/WC9
Low Temp. Carbon Steel A350 LF2, A352 LCB/LCC
Austenitic Stainless Steel A182 F304/F316, A351 CF8/CF8M/CF3/CF3M
Duplex Stainless Steel A182 F51/F53/F55, A995 4A/5A/6A
Special Alloy Inconel® 625(UNS N06625), 254SMO®(UNS S31254)
Monel® K400/500(UNS N04400/N05500)

06 [Link]
 Triple-Eccentric Butterfly Valve

Triple-Eccentric Geometry

1st offset :
The valve stem is offset behind the seat axis to allow complete
sealing contact around the entire seat.

2nd offset :
The shaft centerline is offset from the pipe and valve which pro-
vides interference free opening and closing of the valve

3rd offset :
The seat cone axis is offset from the shaft centerline to elimi-
nate friction during closing and opening and to achieve uni-
form compressive sealing around the entire seat.

With this geometry, seat seal interference is completely elimi-

nated ensuring long sealing life. The result is torque seating,
process pressure aided frictionless seal. The geometry allows
the body seat to be used as the closed limit stop, aiding oper-
ator adjustment. The triple offset design is ideally suited to
metal seated valves providing bubble-tight performance on
high temperature, high pressure and firesafe applications.

Features and Benefits

•Friction-free sealing DISC DISC DISC

•Bubble tight shut-off
•Low operating torque Hard-
•Extended life cycle facing

•Inherently fire-safe satisfying API 607

•Wide range of service temperature
Hard-Facing Hard-Facing Hard-Facing
•Excellent flow characteristics BODY BODY BODY

•Easy replacement of the disc seat ring

Variety of seat designs
•Anti blow-out stem with retaining systems
•ISO mounting flange suitable for various operator

Triple-Eccentric Butterfly Valve 07

 Triple-Eccentric Butterfly Valve

Double Flanged Type

Elevation

Size L L1 Bolt
CLASS F H D G T F C N d
Inch mm ( SHORT ) ( LONG ) Diameter
150 114 203 137 208 190 127.0 23.9 2 152.4 4 19 5/8"
3 80 300 180 282 139 208 210 127.0 28.4 2 168.3 8 23 3/4"
600 180 356 143 208 210 127.0 31.8 7 168.3 8 23 3/4"
150 127 229 155 213 230 157.2 23.9 2 190.5 8 19 5/8"
4 100 300 190 305 166 233 255 157.2 31.8 2 200.0 8 23 3/4"
600 190 432 182 275 275 157.2 38.1 7 215.9 8 26 7/8"
150 140 267 170 263 280 215.9 25.4 2 241.3 8 23 3/4"
6 150 300 210 403 203 293 320 215.9 36.6 2 269.9 12 23 3/4"
600 210 559 222 300 355 269.7 47.8 7 292.1 12 29 1"
150 152 292 210 308 345 269.7 28.4 2 298.5 8 23 3/4"
8 200 300 230 418 240 330 380 269.7 41.1 2 330.2 12 26 7/8"
600 230 660 248 350 420 269.7 55.6 7 349.2 12 32 1-1/8"
150 165 330 230 340 405 323.9 30.2 2 362.0 12 26 7/8"
10 250 300 250 457 264 375 445 323.9 47.8 2 387.4 16 29 1"
600 250 787 325 436 508 323.9 63.5 7 431.8 16 35 1-1/4"
150 178 356 280 394 483 381.0 31.8 2 431.8 12 26 7/8"
12 300 300 270 502 299 419 521 381.0 50.8 2 450.8 16 32 1-1/8"
600 270 838 348 455 559 381.0 66.5 7 489.0 20 35 1-1/4"
150 190 381 308 435 533 412.8 35.1 2 476.3 12 29 1"
14 350 300 290 762 349 485 584 412.8 53.8 2 514.4 20 32 1-1/8"
600 290 889 378 485 603 412.8 69.9 7 527.0 20 38 1-3/8"
150 216 406 345 480 597 469.9 36.6 2 539.8 16 29 1"
16 400 300 310 838 389 499 648 469.9 57.2 2 571.5 20 35 1-1/4"
600 310 991 425 515 686 469.9 76.2 7 603.2 20 42 1-1/2"
150 222 432 383 517 635 533.4 39.6 2 577.9 16 32 1-1/8"
18 450 300 330 914 460 530 711 533.4 60.5 2 628.6 24 35 1-1/4"
600 330 1092 458 552 743 533.4 82.6 7 654.0 20 45 1-5/8"
150 229 457 393 543 699 584.2 42.9 2 635.0 20 32 1-1/8"
20 500 300 350 991 471 597 755 584.2 63.5 2 685.8 24 35 1-1/4"
600 350 1194 500 658 813 584.2 88.9 7 723.9 24 45 1-5/8"
150 267 508 470 622 813 692.2 47.8 2 749.3 20 35 1-1/4"
24 600 300 390 1143 553 695 914 692.2 69.9 2 812.8 24 42 1-1/2"
600 390 1397 560 725 940 692.2 101.6 7 838.2 24 51 1-7/8"
※ Dimensions and weight are subject to change without prior notice.

08 [Link]
 Triple-Eccentric Butterfly Valve

Class 150/300/600

Cross-sectional (Short) Cross-sectional (Long)

Size L L1 Bolt
CLASS F H D G T F C N d
Inch mm ( SHORT ) ( LONG ) Diameter
150 292 559 490 635 870 749.0 68.7 2 806.5 24 35 1-1/4"
26 650 300 410 1245 970 749.0 84.6 2 876.3 28 45 1-5/8"
600 1448 1015 749.0 132.5 7 914.4 28 51 1-7/8"
150 292 610 555 686 925 800.0 71.9 2 863.6 28 35 1-1/4"
28 700 300 430 1346 1035 800.0 90.9 2 939.8 28 45 1-5/8"
600 1549 1075 800.0 137.8 7 965.2 28 54 2"
150 318 610 580 711 985 857.0 75.1 2 914.4 28 35 1-1/4"
30 750 300 450 1397 1090 857.0 95.7 2 997.0 28 48 1-3/4"
600 1651 705 815 1130 857.0 146.7 7 1022.4 28 54 2"
150 318 660 620 760 1060 914.0 81.4 2 977.9 28 42 1-1/2"
32 800 300 470 1524 1150 914.0 100.5 2 1054.1 28 51 1-7/8"
600 1778 725 870 1195 914.0 154.7 7 1079.5 28 61 2-1/4"
150 318 660 800 1110 965.0 83.0 2 1028.7 32 42 1-1/2"
34 850 300 1205 965.0 105.2 2 1104.9 28 51 1-7/8"
600 1245 965.0 161.0 7 1130.3 28 61 2-1/4"
150 330 711 676 845 1170 1022.0 90.9 2 1085.9 32 42 1-1/2"
36 900 300 510 1727 1270 1022.0 111.6 2 1168.4 32 54 2"
600 2083 1315 1022.0 169.0 7 1193.8 28 67 2-1/2"
150 410 712 870 1240 1073.0 87.8 2 1149.4 32 42 1-1/2"
38 950 300 530 1170 1029.0 108.4 2 1092.2 32 42 1-1/2"
600 1270 1054.0 162.0 7 1162.0 28 61 2-1/4"
150 410 757 915 1290 1124.0 90.9 2 1200.2 36 42 1-1/2"
40 1000 300 550 1240 1086.0 144.8 2 1155.7 32 45 1-5/8"
600 1320 1111.0 169.0 7 1212.9 32 61 2-1/4"
150 410 784 920 1345 1194.0 97.3 2 1257.3 36 42 1-1/2"
42 1050 300 570 1290 1137.0 199.5 2 1206.5 32 45 1-5/8"
600 1405 1168.0 178.5 7 1282.7 28 67 2-1/2"
150 470 824 975 1405 1245.0 102.1 2 1314.5 40 42 1-1/2"
44 1100 300 1355 1194.0 124.3 2 1263.7 32 48 1-3/4"
600 1455 1226.0 184.8 7 1333.5 32 67 2-1/2"
150 470 862 1052 1510 1359.0 108.4 2 1422.4 44 42 1-1/2"
48 1200 300 630 1465 1302.0 133.8 2 1371.6 32 51 1-7/8"
600 1595 1334.0 202.3 7 1460.5 32 74 2-3/4"
※ Dimensions and weight are subject to change without prior notice.

Triple-Eccentric Butterfly Valve 09

 Triple-Eccentric Butterfly Valve

Lug Type Class 150/300/600

Elevation Cross-sectional

Size Bolt Size Bolt

CLASS L F H D G F C N d CLASS L F H D G F C N d
Inch mm Diameter Inch mm Diameter
150 48 137 208 190 127.0 2 152.4 4 19 5/8" 150 165 490 635 870 749 2 806.5 24 35 1-1/4"
3 80 300 48 139 208 210 127.0 2 168.3 8 23 3/4" 26 650 300 209 640 800 970 749 2 876.3 28 45 1-5/8"
600 54 143 208 210 127.0 7 168.3 8 23 3/4" 600 1015 749 7 914.4 28 51 1-7/8"
150 54 155 213 230 157.2 2 190.5 8 19 5/8" 150 165 555 686 925 800 2 863.6 28 35 1-1/4"
4 100 300 54 166 233 255 157.2 2 200.0 8 23 3/4" 28 700 300 209 660 810 1035 800 2 939.8 28 45 1-5/8"
600 64 182 275 275 157.2 7 215.9 8 26 7/8" 600 1075 800 7 965.2 28 54 2
150 57 170 263 280 215.9 2 241.3 8 23 3/4" 150 165 580 711 985 857 2 914.4 28 35 1-1/4"
6 150 300 59 203 293 320 215.9 2 269.9 12 23 3/4" 30 750 300 241 690 825 1090 857 2 997.0 28 48 1-3/4"
600 78 222 300 355 215.9 7 292.1 12 29 1" 600 705 815 1130 857 7 1022.4 28 54 2"
150 64 210 308 345 269.7 2 298.5 8 23 3/4" 150 190 620 760 1060 914 2 977.9 28 42 1-1/2"
8 200 300 73 240 330 380 269.7 2 330.2 12 26 7/8" 32 800 300 241 720 860 1150 914 2 1054.1 28 51 1-7/8"
600 102 248 350 420 269.7 7 349.2 12 32 1-1/8" 600 725 870 1195 914 7 1079.5 28 61 2-1/4"
150 71 230 340 405 323.9 2 362.0 12 26 7/8" 150 190 660 800 1110 965 2 1028.7 32 42 1-1/2"
10 250 300 83 264 375 445 323.9 2 387.4 16 29 1" 34 850 300 241 740 920 1205 965 2 1104.9 28 51 1-7/8"
600 117 325 436 508 323.9 7 431.8 16 35 1-1/4" 600 1245 965 7 1130.3 28 61 2-1/4"
150 81 280 394 483 381.0 2 431.8 12 26 7/8" 150 200 676 845 1170 1022 2 1085.9 32 42 1-1/2"
12 300 300 92 299 419 521 381.0 2 450.8 16 32 1-1/8" 36 900 300 300 750 930 1270 1022 2 1168.4 32 54 2"
600 140 348 455 559 381.0 7 489.0 20 35 1-1/4" 600 1315 1022 7 1193.8 28 67 2-1/2"
150 92 308 435 533 412.8 2 476.3 12 29 1" 150 200 712 870 1240 1073 2 1149.4 32 42 1-1/2"
14 350 300 117 349 485 584 412.8 2 514.4 20 32 1-1/8" 38 950 300 1170 1029 2 1092.2 32 42 1-1/2"
600 155 378 485 603 412.8 7 527.0 20 38 1-3/8" 600 1270 1054 7 1162.0 28 61 2-1/4"
150 102 345 480 597 469.9 2 539.8 16 29 1" 150 216 757 915 1290 1124 2 1200.2 36 42 1-1/2"
16 400 300 133 389 499 648 469.9 2 571.5 20 35 1-1/4" 40 1000 300 1240 1086 2 1155.7 32 45 1-5/8"
600 178 425 515 686 469.9 7 603.2 20 42 1-1/2" 600 1320 1111 7 1212.9 32 61 2-1/4"
150 114 383 517 635 533.4 2 577.9 16 32 1-1/8" 150 251 784 920 1345 1194 2 1257.3 36 42 1-1/2"
18 450 300 149 430 530 711 533.4 2 628.6 24 35 1-1/4" 42 1050 300 1290 1137 2 1206.5 32 45 1-5/8"
600 200 458 552 743 533.4 7 654.0 20 45 1-5/8" 600 1405 1168 7 1282.7 28 67 2-1/2"
150 127 393 543 699 584.2 2 635.0 20 32 1-1/8" 150 251 824 975 1405 1245 2 1314.5 40 42 1-1/2"
20 500 300 159 471 597 775 584.2 2 685.8 24 35 1-1/4" 44 1100 300 1355 1194 2 1263.7 32 48 1-3/4"
600 216 500 658 813 584.2 7 723.9 24 45 1-5/8" 600 1455 1226 7 1333.5 32 67 2-1/2"
150 154 470 622 813 692.2 2 749.3 20 35 1-1/4" 150 276 862 1052 1510 1359 2 1422.4 44 42 1-1/2"
24 600 300 181 553 695 914 692.2 2 812.8 24 42 1-1/2" 48 1200 300 1465 1302 2 1371.6 32 51 1-7/8"
600 232 560 725 940 692.2 7 838.2 24 51 1-7/8" 600 1595 1334 7 1460.5 32 74 2-3/4"
※ Dimensions and weight are subject to change without prior notice.

10 [Link]
 Triple-Eccentric Butterfly Valve

Wafer Type Class 150/300/600

Elevation Cross-sectional

Size Bolt Size Bolt

CLASS L F H C N d CLASS L F H C N d
Inch mm Diameter Inch mm Diameter
150 48 137 208 152.4 4 19 5/8" 150 165 490 635 806.5 4 35 1-1/4"
3 80 300 48 139 208 168.3 4 23 3/4" 26 650 300 209 640 800 876.3 4 45 1-5/8"
600 54 143 208 168.3 4 23 3/4" 600 914.4 4 51 1-7/8"
150 54 155 213 190.5 4 19 5/8" 150 165 555 686 863.6 4 35 1-1/4"
4 100 300 54 166 233 200.0 4 23 3/4" 28 700 300 209 660 810 939.8 4 45 1-5/8"
600 64 182 275 215.9 4 26 7/8" 600 965.2 4 54 2"
150 57 170 263 241.3 4 23 3/4" 150 165 580 711 914.4 4 35 1-1/4"
6 150 300 59 203 293 269.9 4 23 3/4" 30 750 300 241 690 825 997.0 4 48 1-3/4"
600 78 222 300 292.1 4 29 1" 600 705 815 1022.4 4 54 2"
150 64 210 308 298.5 4 23 3/4" 150 190 620 760 977.9 4 42 1-1/2"
8 200 300 73 240 330 330.2 4 26 7/8" 32 800 300 241 690 825 1054.1 4 51 1-7/8"
600 102 248 350 349.2 4 32 1-1/8" 600 725 870 1079.5 4 61 2-1/4"
150 71 230 340 362.0 4 26 7/8" 150 190 660 800 1028.7 4 42 1-1/2"
10 250 300 83 264 375 387.4 4 29 1" 34 850 300 241 740 920 1104.9 4 51 1-7/8"
600 117 325 436 431.8 4 35 1-1/4" 600 1130.3 4 61 2-1/4"
150 81 280 394 431.8 4 26 7/8" 200 676 845 1085.9 4 42 1-1/2"
12 300 300 92 299 419 450.8 4 32 1-1/8" 36 900 300 300 750 930 1168.4 4 54 2"
600 140 348 455 489.0 4 35 1-1/4" 600 1193.8 4 67 2-1/2"
150 92 308 435 476.3 4 29 1" 150 200 712 870 1149.4 4 42 1-1/2"
14 350 300 117 349 485 514.4 4 32 1-1/8" 38 950 300 1092.2 4 42 1-1/2"
600 155 378 485 527.0 4 38 1-3/8" 600 1162.0 4 61 2-1/4"
150 102 345 480 539.8 4 29 1" 150 216 757 915 1200.2 4 42 1-1/2"
16 400 300 133 389 499 571.5 4 35 1-1/4" 40 1000 300 1155.7 4 45 1-5/8"
600 178 425 515 603.2 4 42 1-1/2" 600 1212.9 4 61 2-1/4"
150 114 383 517 577.9 4 32 1-1/8" 150 251 784 920 1257.3 4 42 1-1/2"
18 450 300 149 430 530 628.6 4 35 1-1/4" 42 1050 300 1206.5 4 45 1-5/8"
600 200 458 552 654.0 4 45 1-5/8" 600 1282.7 4 67 2-1/2"
150 127 393 543 635.0 4 32 1-1/8" 150 251 824 975 1314.5 4 42 1-1/2"
20 500 300 159 471 597 685.8 4 35 1-1/4" 44 1100 300 1263.7 4 48 1-3/4"
600 216 500 658 723.9 4 45 1-5/8" 600 1333.5 4 67 2-1/2"
150 154 470 622 749.3 4 35 1-1/4" 150 276 862 1052 1422.4 4 42 1-1/2"
24 600 300 181 553 695 812.8 4 42 1-1/2" 48 1200 300 1371.6 4 51 1-7/8"
600 232 560 725 838.2 4 51 1-7/8" 600 1460.5 4 74 2-3/4"
※ Dimensions and weight are subject to change without prior notice.

Triple-Eccentric Butterfly Valve 11

 Double-Eccentric Butterfly Valve

Standard Specification

● DESIGN
API 609 Cat. B
ASME B 16.34

● FACE TO FACE
API 609 Cat. B
Wafer and Lugged
Double flange Short/Long

● FLANGE STANDARD
ASME B 16.5/16.47
BS 4504/EN 1092-1
JIS B2220
Others on request

● PRESSURE RATING
ASME B 16.34
Class 150/300

● NOMINAL DIAMETER
2” to 144”
DN 50 to 3600

● OTHER OPTIONS
Fire safe design
Anti-static device
Cryogenic design
Others on request

● TESTING
API 598
ASME B 16.104/FCI 70-2
ISO 5208

Applicable Materials
Carbon Steel A105, A216 WCB/WCC/WC6/WC9
Low Temp. Carbon Steel A350 LF2, A352 LCB/LCC
Austenitic Stainless Steel A182 F304/F316, A351 CF8/CF8M/CF3/CF3M
Duplex Stainless Steel A182 F51/F53/F55, A995 4A/5A/6A
Special Alloy Inconel® 625(UNS N06625), 254SMO®(UNS S31254)
Monel® K400/500(UNS N04400/N05500)

12 [Link]
 Double-Eccentric Butterfly Valve

Double-Eccentric Geometry

1st offset :
The first offset is achieved by locating the shaft downstream of Center Line Center Line
of Disc of Valve
the center-line of the seat. This allows for a totally unobstructed
360° sealing surface. Disc in Open
Position

2nd offset : Body 1st

Offset
The second offset locates the shafts off-center of the vertical
axis of the seat.

The combination of these two offsets creates a cam effect as

the disc swings into and out of the seat. The disc lifts quickly
out of the seat in the first few degrees of travel and does not
Seat Stem Disc in Closed
contact the seat again until it is nearly closed. There are no wear Position
points between the seat and disc, while operating torques are 2st
reduced and seat life is extended. Offset

Features and Benefits

Variety of seat design

• Double eccentric geometry to provide superior sealing with

Retainer
minimal seat contact and wear Retainer
Body
Body
• Single piece shaft and disc designed for maximum strength
and flow coefficient
Seat
• Combination mechanical and pressure energized seat de- Seat
Disc
sign for repeatable and reliable sealing performance Disc

• Blow-out proof stem prevents injury and product loss

• Seat option includes PTFE, EPDM, NBR and VITON® soft seats PTFE seat Rubber seat
and flexible metal seats to suit variety of application
• Long life, easy filed replaceable seat placed in body, away
from flow stream, provides bubble tight shut off Retainer
Retainer
• Heavy duty pins connecting valve shaft to disc avoids lost Body Body
motion under high torque conditions
• Low friction bearings provide maximum radial support for
Seat
higher shaft loads and minimize operating torque Seat
Disc Disc
• Cavity free flow passage offers minimum flow resistance and
high Cv.
PTFE+Metal seat Flat metal seat

Double-Eccentric Butterfly Valve 13

 Double-Eccentric Butterfly Valve

Double Flanged Type

Elevation

Size L L1 Bolt
CLASS F H D G T F C N d
Inch mm ( SHORT ) ( LONG ) Diameter
150 114 203 137 208 190 127.0 23.9 2 152.4 4 19 5/8"
3 80
300 180 282 139 208 210 127.0 28.4 2 168.3 8 23 3/4"
150 127 229 155 213 230 157.2 23.9 2 190.5 8 19 5/8"
4 100
300 190 305 166 233 255 157.2 31.8 2 200.0 8 23 3/4"
150 140 267 170 263 280 215.9 25.4 2 241.3 8 23 3/4"
6 150
300 210 403 203 293 320 215.9 36.6 2 269.9 12 23 3/4"
150 152 292 210 308 345 269.7 28.4 2 298.5 8 23 3/4"
8 200
300 230 418 240 330 380 269.7 41.1 2 330.2 12 26 7/8"
150 165 330 230 340 405 323.9 30.2 2 362.0 12 26 7/8"
10 250
300 250 457 264 375 445 323.9 47.8 2 387.4 16 29 1"
150 178 356 280 394 483 381.0 31.8 2 431.8 12 26 7/8"
12 300
300 270 502 299 419 521 381.0 50.8 2 450.8 16 32 1-1/8"
150 190 381 308 435 533 412.8 35.1 2 476.3 12 29 1"
14 350
300 290 762 349 485 584 412.8 53.8 2 514.4 20 32 1-1/8"
150 216 406 345 480 597 469.9 36.6 2 539.8 16 29 1"
16 400
300 310 838 389 499 648 469.9 57.2 2 571.5 20 35 1-1/4"
150 222 432 383 517 635 533.4 39.6 2 577.9 16 32 1-1/8"
18 450
300 330 914 430 530 711 533.4 60.5 2 628.6 24 35 1-1/4"
150 229 457 393 543 699 584.2 42.9 2 635.0 20 32 1-1/8"
20 500
300 350 991 471 597 775 584.2 63.5 2 685.8 24 35 1-1/4"
150 267 508 470 622 813 692.2 47.8 2 749.3 20 35 1-1/4"
24 600
300 390 1143 553 695 914 692.2 69.9 2 812.8 24 42 1-1/2"
※ Dimensions and weight are subject to change without prior notice.

14 [Link]
 Double-Eccentric Butterfly Valve

Class 150/300

Cross-sectional (Short) Cross-sectional (Long)

Size L L1 Bolt
CLASS F H D G T F C N d
Inch mm ( SHORT ) ( LONG ) Diameter
150 292 559 490 635 870 749.0 68.7 2 806.5 24 35 1-1/4"
26 650
300 410 1245 970 749.0 84.6 2 876.3 28 45 1-5/8"
150 292 610 555 686 925 800.0 71.9 2 863.6 28 35 1-1/4"
28 700
300 430 1346 1035 800.0 90.9 2 939.8 28 45 1-5/8"
150 318 610 580 711 985 857.0 75.1 2 914.4 28 35 1-1/4"
30 750
300 450 1397 1090 857.0 95.7 2 997.0 28 48 1-3/4"
150 318 660 620 760 1060 914.0 81.4 2 977.9 28 42 1-1/2"
32 800
300 470 1524 1150 914.0 100.5 2 1054.1 28 51 1-7/8"
150 318 660 800 1110 965.0 83.0 2 1028.7 32 42 1-1/2"
34 850
300 1205 965.0 105.2 2 1104.9 28 51 1-7/8"
150 330 711 676 845 1170 1022.0 90.9 2 1085.9 32 42 1-1/2"
36 900
300 510 1727 1270 1022.0 111.6 2 1168.4 32 54 2"
150 410 712 870 1240 1073.0 87.8 2 1149.4 32 42 1-1/2"
38 950
300 530 1170 1029.0 108.4 2 1092.2 32 42 1-1/2"
150 410 757 915 1290 1124.0 90.9 2 1200.2 36 42 1-1/2"
40 1000
300 550 1240 1086.0 114.8 2 1155.7 32 45 1-5/8"
150 410 784 920 1345 1194.0 97.3 2 1257.3 36 42 1-1/2"
42 1050
300 570 1290 1137.0 119.5 2 1206.5 32 45 1-5/8"
150 470 824 975 1405 1245.0 102.1 2 1314.5 40 42 1-1/2"
44 1100
300 1355 1194.0 124.3 2 1263.7 32 48 1-3/4"
150 470 862 1052 1510 1359.0 108.4 2 1422.4 44 42 1-1/2"
48 1200
300 630 1465 1302.0 133.8 2 1371.6 32 51 1-7/8"
※ Dimensions and weight are subject to change without prior notice.

Double-Eccentric Butterfly Valve 15

 Double-Eccentric Butterfly Valve

Lug Type Class 150/300

Elevation Cross-sectional

Size Bolt Size Bolt

CLASS L F H D G F C N d CLASS L F H D G F C N d
Inch mm Diameter Inch mm Diameter
150 48 130 190 190 127.0 2 152.4 4 19 5/8" 150 165 490 635 870 749.0 2 806.5 24 35 1-1/4"
3 80 26 650
300 48 210 127.0 2 168.3 8 23 3/4" 300 209 640 800 970 749.0 2 876.3 28 45 1-5/8"
150 54 149 209 230 157.2 2 190.5 8 19 5/8" 150 165 555 686 925 800.0 2 863.6 28 35 1-1/4"
4 100 28 700
300 54 160 230 255 157.2 2 200.0 8 23 3/4" 300 209 660 810 1035 800.0 2 939.8 28 45 1-5/8"
150 57 175 260 280 215.9 2 241.3 8 23 3/4" 150 165 580 711 985 857.0 2 914.4 28 35 1-1/4"
6 150 30 750
300 59 203 288 320 215.9 2 269.9 12 23 3/4" 300 241 690 825 1090 857.0 2 997.0 28 48 1-3/4"
150 64 213 298 345 269.7 2 298.5 8 23 3/4" 150 190 620 760 1060 914.0 2 977.9 28 42 1-1/2"
8 200 32 800
300 73 240 330 380 269.7 2 330.2 12 26 7/8" 300 241 690 825 1150 914.0 2 1054.1 28 51 1-7/8"
150 71 247 342 405 323.9 2 362.0 12 26 7/8" 150 190 660 800 1110 965.0 2 1028.7 32 42 1-1/2"
10 250 34 850
300 83 275 375 445 323.9 2 387.4 16 29 1" 300 241 740 920 1205 965.0 2 1104.9 28 51 1-7/8"
150 81 289 394 483 381.0 2 431.8 12 26 7/8" 150 200 676 845 1170 1022.0 2 1085.9 32 42 1-1/2"
12 300 36 900
300 92 313 521 381.0 2 450.8 16 32 1-1/8" 300 300 750 930 1270 1022.0 2 1168.4 32 54 2
150 92 321 426 533 412.8 2 476.3 12 29 1" 150 200 712 870 1240 1073.0 2 1149.4 32 42 1-1/2"
14 350 38 950
300 117 349 584 412.8 2 514.4 20 32 1-1/8" 300 1170 1029.0 2 1092.2 32 42 1-1/2"
150 102 357 462 597 469.9 2 539.8 16 29 1" 150 216 757 915 1290 1124.0 2 1200.2 36 42 1-1/2"
16 400 40 1000
300 133 390 510 648 469.9 2 571.5 20 35 1-1/4" 300 1240 1086.0 2 1155.7 32 45 1-5/8"
150 114 383 498 635 533.4 2 577.9 16 32 1-1/8" 150 251 784 920 1345 1194.0 2 1257.3 36 42 1-1/2"
18 450 42 1050
300 149 427 711 533.4 2 628.6 24 35 1-1/4" 300 1290 1137.0 2 1206.5 32 45 1-5/8"
150 127 418 533 699 584.2 2 635.0 20 32 1-1/8" 150 251 824 975 1405 1245.0 2 1314.5 40 42 1-1/2"
20 500 44 1100
300 159 457 592 775 584.2 2 685.8 24 35 1-1/4" 300 1355 1194.0 2 1263.7 32 48 1-3/4"
150 154 481 596 813 692.2 2 749.3 20 35 1-1/4" 150 276 862 1052 1510 1359.0 2 1422.4 44 42 1-1/2"
24 600 48 1200
300 181 535 680 914 692.2 2 812.8 24 42 1-1/2" 300 1465 1302.0 2 1371.6 32 51 1-7/8"

※ Dimensions and weight are subject to change without prior notice.

16 [Link]
 Double-Eccentric Butterfly Valve

Wafer Type Class 150/300

Elevation Cross-sectional

Size Bolt Size Bolt

CLASS L F H C N d CLASS L F H C N d
Inch mm Diameter Inch mm Diameter
150 48 130 190 152.4 4 19 5/8" 150 165 490 635 806.5 24 35 1-1/4"
3 80 26 650
300 48 168.3 8 23 3/4" 300 209 640 800 876.3 28 45 1-5/8"
150 54 149 209 190.5 8 19 5/8" 150 165 555 686 863.6 28 35 1-1/4"
4 100 28 700
300 54 160 230 200.0 8 23 3/4" 300 209 660 810 939.8 28 45 1-5/8"
150 57 175 260 241.3 8 23 3/4" 150 165 580 711 914.4 28 35 1-1/4"
6 150 30 750
300 59 203 288 269.9 12 23 3/4" 300 241 690 825 997.0 28 48 1-3/4"
150 64 213 298 298.5 8 23 3/4" 150 190 620 760 977.9 28 42 1-1/2"
8 200 32 800
300 73 240 330 330.2 12 26 7/8" 300 241 690 825 1054.1 28 51 1-7/8"
150 71 247 342 362.0 12 26 7/8" 150 190 660 800 1028.7 32 42 1-1/2"
10 250 34 850
300 83 275 375 387.4 16 29 1" 300 241 740 920 1104.9 28 51 1-7/8"
150 81 289 394 431.8 12 26 7/8" 150 200 676 845 1085.9 32 42 1-1/2"
12 300 36 900
300 92 313 450.8 16 32 1-1/8" 300 300 750 930 1168.4 32 54 2"
150 92 321 426 476.3 12 29 1" 150 200 712 870 1149.4 32 42 1-1/2"
14 350 38 950
300 117 349 514.4 20 32 1-1/8" 300 1092.2 32 42 1-1/2"
150 102 357 462 539.8 16 29 1" 150 216 757 915 1200.2 36 42 1-1/2"
16 400 40 1000
300 133 390 510 571.5 20 35 1-1/4" 300 1155.7 32 45 1-5/8"
150 114 383 498 577.9 16 32 1-1/8" 150 251 784 920 1257.3 36 42 1-1/2"
18 450 42 1050
300 149 427 628.6 24 35 1-1/4" 300 1206.5 32 45 1-5/8"
150 127 418 533 635.0 20 32 1-1/8" 150 251 824 975 1314.5 40 42 1-1/2"
20 500 44 1100
300 159 457 592 685.8 24 35 1-1/4" 300 1263.7 32 48 1-3/4"
150 154 481 596 749.3 20 35 1-1/4" 150 276 862 1052 1422.4 44 42 1-1/2"
24 600 48 1200
300 181 535 680 812.8 24 42 1-1/2" 300 1371.6 32 51 1-7/8"

※ Dimensions and weight are subject to change without prior notice.

Double-Eccentric Butterfly Valve 17

 Waterworks Butterfly Valve

Standard Specifications

● DESIGN
AWWA C 504
BS 5155
JIS B 2064

● FACE-TO FACE
BS 5155 Short Type
AWWA C 504 Short Type
Others on request

● FLANGE STANDARD
ASME B 16.5/16.47
BS 4504/EN 1092-1
AWWA C 207
JIS B2220
Others on request

● PRESSURE RATING
AWWA C 504
Class 25/75/150

● NOMINAL DIAMETER
8” to 120”
DN 200 to 3000

● INSTALLATION OPTIONS
HORIZONTAL
VERTICAL

● LINING OPTIONS
FULL RUBBER LINED
RUBBER LINED BODY ONLY

● TESTING
AWWA C 504

Applicable Materials
Body A126 CL.B / A536 / A216 WCB
Disc A536 / A216 WCB / A351 CF8 / B148
Body Seat A276 304 / B148 / NBR
Disc Seat A276 304 / B148 / NBR
Lining Natural Rubber / NBR / EPDM

18 [Link]
 Waterworks Butterfly Valve

Single-Eccentric Geometry

Body

The central line of the valve spindle

Disc

Stem

The central line of the valve bush

Sealing section

Sealring
The sealing outer ring of butterfly board

This offset disc design provides an uninterrupted 360° sealing surface. The sealing surface is not interrupted by the
valve shaft and does not have any continuous contact points between the body sealing surface and the disc sealing
surface. This results in a longer seat life.

Features and Benefits

• Valve bodies shall be cast iron A126 CL.B, ductile Variety of Seat Design
iron A536 or cast steel A216 WCB, short body de-
sign. And, body thickness shall be in strict accor-
Disc
dance with AWWA C504 where applicable.
• Discs shall not have any hollow chambers that can Seat Gland
entrap water. All surfaces shall be visually in-
Gland bolt & nut
spected to assure all structural members are at full
disc strength. Disc and shaft connection shall be
made with stainless steel pins and/or bolts. Body Seat
• Shafts shall be turned, grounded, polished and
constructed of stainless steel Type 304 or 316.
Shafts shall be two-piece, stub type and keyed for Seat on Body Type
actuator connection. Diameter of shafts shall
meet minimum requirements established by
AWWA C504 where applicable. Disc
• Seats shall be constructed of synthetic rubber
Seat Gland
compound such as NBR or EPDM and be a full
360° without interruption. Seats shall be field ad- Gland bolt & nut

justable around the full 360° circumference and Disc Seat

replaceable without dismantling the actuator, disc
of shaft and without removing the valve from the
pipeline. Body Seat

Seat on Disc Type

Waterworks Butterfly Valve 19

 Waterworks Butterfly Valve

DN 200 - 1000

Elevation Cross-sectional

BS 5155 AWWA C 504 Flange

Size Approx.
Short Type Short Type Bolt Hole B1 B2 B3 B4 B5 ØW H1 Weight
Inch mm (Kg)
L L ØD ØC n-Øh Txf

8 200 152 152 340 295 8 - 23 27 x 3 213 425 582 83 240 315 220 96
10 250 165 203 395 350 12 - 23 29 x 3 244 465 622 83 240 315 220 120

12 300 178 203 445 400 12 - 23 31 x 4 276 495 652 121 278 315 283 145
14 350 190 203 505 460 16 - 23 32 x 4 310 538 695 121 278 315 283 195
16 400 216 203 565 515 16 - 28 34 x 4 343 578 735 121 278 315 283 256

18 450 222 203 615 565 20 - 28 35 x 4 367 606 806 177 377 400 377 288

20 500 229 203 670 620 20 - 28 36 x 4 400 638 838 177 377 400 377 353
24 600 267 203 780 725 20 - 31 40 x 4 453 680 880 177 377 400 377 454
28 700 292 305 895 840 24 - 31 46 x 4 525 815 1095 236 443 560 560 582

32 800 318 305 1015 950 24 - 34 49 x 5 596 842 1122 236 443 560 560 686
36 900 330 305 1115 1050 28 - 34 51 x 5 653 964 1244 236 443 560 560 1052

40 1000 410 305 1230 1160 28 - 37 55 x 5 730 1035 1365 333 540 700 560 1280

※ Dimensions and weight are subject to change without prior notice.

20 [Link]
 Waterworks Butterfly Valve

DN 1100 - 3000

Elevation Cross-sectional

BS 5155 AWWA C 504 Flange

Size Approx.
Short Type Short Type Bolt Hole B1 B2 B3 B4 B5 ØW H1 Weight
Inch mm (Kg)
L L ØD ØC n-Øh Txf
44 1100 152 152 340 295 8 - 23 27 x 3 213 425 582 83 240 315 220 96

48 1200 165 203 395 350 12 - 23 29 x 3 244 465 622 83 240 315 220 120

54 1350 178 203 445 400 12 - 23 31 x 4 276 495 652 121 278 315 283 145
60 1500 190 203 505 460 16 - 23 32 x 4 310 538 695 121 278 315 283 195

66 1650 216 203 565 515 16 - 28 34 x 4 343 578 735 121 278 315 283 256

72 1800 222 203 615 565 20 - 28 35 x 4 367 606 806 177 377 400 377 288
80 2000 229 203 670 620 20 - 28 36 x 4 400 638 838 177 377 400 377 353

88 2200 267 203 780 725 20 - 31 40 x 4 453 680 880 177 377 400 377 454

96 2400 292 305 895 840 24 - 31 46 x 4 525 815 1095 236 443 560 560 582
100 2500 318 305 1015 950 24 - 34 49 x 5 596 842 1122 236 443 560 560 686

104 2600 330 305 1115 1050 28 - 34 51 x 5 653 964 1244 236 443 560 560 1052

112 2800 410 305 1230 1160 28 - 37 55 x 5 730 1035 1365 333 540 700 560 1280

120 3000 600 600 3405 3290 68 - 62 75 x 6 2150 2470 3220 600 1350 900 1770 11800

※ Dimensions and weight are subject to change without prior notice.

Waterworks Butterfly Valve 21

 Butterfly Check Valve

General overview

A butterfly check valve with counterweight and hy-

draulic cylinder is very reliable as it can regulate the
closing time of the valve itself. This valve is applied in
pipelines as a non-return device, with flow allowed in
one direction only. The butterfly check valve with
counterweight is double-eccentric type with a tilting
disc, the counterweight lever will facilitate the anti-
hammer device and the oil cylinder will slow down the
closure movement, to reduce any slam with noise.
With the damping system, the water hammer effect
can be prevented effectively by reducing the damping
time. The flow opens the valve in the desired direction,
while back flow forces the valve to close. Full tightness
is ensured by an elastomer-to-metal seat design and
it can be easily replaced without dismantling the valve
from the pipeline.

Mechanism and operation

Main application
• Water
• Energy
• Industry

Application fluid
• Sea water
• Drinking water
• Brackish water
• Grey water
• Solids-laden fluids
• Corrosive fluids
• Gas Non-Return valve in Non-Return valve in 50% Non-Return valve in
damped open position open position damped closed position

Features
• Double-offset free-swinging disc
• Low weight due to short face-to-face dimension
• Absolutely reliable, gravity-powered closing system
• Two-speed closing action prevents surge pressure
• Manual open by an emergency hand pump

22 [Link]
 Butterfly Check Valve

DN 600 - 2000

BS 5155 AWWA C 504 Flange

Size
H1 H2
Short Type Short Type Bolt Hole A1 A2 A3 A4 A5
(REF.) (REF.)
Inch mm
L L ØD ØC n-Øh Txf
24 600 267 203 780 725 20 - 31 40 x 4 620 560 820 815 950 700 450
28 700 292 305 895 840 24 - 31 46 x 4 700 645 820 900 1050 750 500

32 800 318 305 1015 950 24 - 34 49 x 5 760 690 820 940 1200 800 550
36 900 330 305 1115 1050 28 - 34 51 x 5 820 750 1200 1000 1300 850 600

40 1000 410 305 1230 1160 28 - 37 55 x 5 900 920 1200 1240 1500 900 650
44 1100 450 343 1366 1270 32 - 37 61 x 5 970 1000 1200 1320 1600 1000 700
48 1200 470 381 1470 1387 32 - 37 63 x 5 1050 1100 1200 1480 1700 1200 825

54 1350 530 381 1642 1552 36 - 38 68 x 6 1170 1200 1200 1580 1800 1350 900
60 1500 530 381 1800 1710 36 - 38 74 x 6 1270 1300 1300 1700 2000 1500 1000

66 1650 530 457 1950 1680 40 - 48 48 x 5 1350 1400 1300 1800 2200 1650 1150
72 1800 550 457 2115 2020 44 - 48 50 x 5 1450 1450 1300 1850 2400 1850 1250
80 2000 550 550 2325 2230 48 - 48 54 x 5 1550 1550 1500 1950 2600 2000 1350

※ Dimensions and weight are subject to change without prior notice.

Butterfly Check Valve 23

 Concentric Butterfly Valves

Standard Specifications

● DESIGN
API 609 / BS 5155
ISO 5752 / MSS SP 67

● FACE-TO FACE
API 609 Cat. A
Wafer and Lugged
Double flange
ISO 5752 Sr.13/20

● FLANGE STANDARD
ASME B 16.5/16.47
BS 4504/EN 1092-1
JIS B2220
BS 10 Table D & E
Others on request

● PRESSURE RATING
ANSI B 16.34 Class 150
JIS 5K/10K/16K/20K
PN 6/10/16

● NOMINAL DIAMETER
1.5 ” to 160 ”
DN 40 to 4000

● TESTING
API 598
MSS SP 67

Applicable Materials
Body A126 CL.B, A395, A536, A216 WCB, A351 CF8/CF8M
Disc A351 CF8/CF8M, B62 C83600, B148 C95800
Seat EPDM, NBR, FKM, Silicon, Neoprene, PTFE
Stem A276 410/304/316, A564 630, B150 C63000, Monel®

Other materials on request

24 [Link]
 Concentric Butterfly Valve

Features and Benefits

• Compact construction results in low weight, less space in installation

• Central shaft position, 100% bi-directional bubble tight shut off
makes installation acceptable at any direction
• No cavities in the flow passage, easy to clean and disinfect for potable
water system, etc.
• Liner creates seal with mating flanges so no media is in contact with
the valve body
• Integral ISO 5211 top flange for easy fitting of actuators
• Low operating torques results in easy operation and economical ac-
tuator sizing
• One-piece resilient seat with integral O-ring seal eliminates the need
for additional flange gasket
• Extended neck design in consideration of construction method and
operability

Seat Material

● EPDM (Working Temp. 0 ~ 80°C)

EPDM is the abbreviated name for Ethylene Propylene Diene Monomer.
In general industry, called EPT, Nordel, ECD, or EPR. Typically these are the
same material as EPDM.
It is the most universal and economical of seat materials.

● BUNA-N (Working Temp. 0 ~ 70°C)

BUNA-N is the commonly used name for Nitrile rubber.
Nitrile is a copolymer of acrylonitrile and butadiene. BUNA-N is Sometimes
referred to as NBR, Nitrile or Hycar.
BUNA-N is an excellent general purpose seat material which is particularly
suitable for hydrocarbon service.

● FKM (Working Temp. -20 ~ 150°C)

FKM is the ASTM D1418 designation for Fluorinated Hydrocarbon Elas-
tomers such as Viton®. FKM has some outstanding characteristics such as
improved acid, oil and temperature resistance over standard seat materials.

● Silicone (Working Temp. -20 ~ 120°C)

Silicone seats are primarily used for their ability to resist abrasive wear.
Silicone can be used on a reasonable broad range of services.
Silicone will withstand severe impact, recover its original shape after dis-
tortion and resist abrasion better than other elastomers such as EPDM and
BUNA-N.

● Neoprene (Working Temp. -10 ~ 70°C)

Neoprene complies with FDA guidelines and is principally recommended
for food and beverage service. It is resistant to vegetable oils, brine and
oxygen. Same as Polychloroprene and CPE.

Concentric Butterfly Valve 25

 Concentric Butterfly Valve

Wafer Type

Elevation Cross-sectional Size 8” ~ 12”

Size Top flange to ISO 5211

ØD Ød L h1 h2 h3 O
Inch mm Type ØN ØP m ØS
1.5 40 86 40 40 54 122 35 F7 90 70 4 9 10
2 50 105 52 43 57 129 35 F7 90 70 4 9 11
2.5 65 114 65 46 67 139 35 F7 90 70 4 9 11
3 80 129 80 46 78 156 35 F7 90 70 4 9 11
4 100 155 100 52 103 164 35 F7 90 70 4 9 11
5 125 180 125 56 107 187 35 F7 90 70 4 9 12
6 150 207 150 56 122 200 35 F7 90 70 4 9 12
8 200 260 198 60 165 238 35 F7 90 70 4 9 13
10 250 331 248 68 215 286 45 F10 125 102 4 12 15
12 300 377 298 78 245 316 45 F10 125 102 4 12 15
14 350 416 327 78 272 345 45 F10 125 102 4 12 20
16 400 475 387 102 304 382 70 F14 175 140 4 18 23
18 450 535 438 114 333 400 70 F14 175 140 4 18 23
20 500 590 477 127 370 438 80 F16 210 165 4 20 34
22 550 680 518 140 413 475 80 F16 210 165 4 20 34
24 600 695 560 154 430 510 80 F16 210 165 4 20 34
26 650 735 585 165 455 530 80 F16 210 165 4 20 34
28 700 800 690 165 490 580 90 F16 210 165 4 20 35
30 750 857 729 180 535 585 90 F25 300 254 4 22 35
32 800 920 785 190 580 630 90 F25 300 254 6 22 35
34 850 945 820 200 590 660 90 F25 300 254 6 22 35
36 900 1000 870 203 650 700 100 F25 300 254 6 22 38
40 1000 1095 960 216 700 750 100 F25 300 254 6 22 40
42 1050 725 820 100 F25 300 254 6 22 40
※ Dimensions and weight are subject to change without prior notice.

26 [Link]
 Concentric Butterfly Valve

Elevation Cross-sectional Size 16” ~ 40”

Size JIS 5K KS, JIS 10K JIS 16K(20K) BS4504 PN10 BS4504 PN16 ANSI 150 LB
Inch mm ØC F ØE ØC F ØE ØC F ØE ØC F ØE ØC F ØE ØC F ØE
1.5 40 95 4 15 105 4 19 105 4 19 110 4 18 110 4 18 98.5 4 16
2 50 105 4 15 120 4 19 120 8 19 125 4 18 125 4 18 121 4 19
2.5 65 130 4 15 140 4 19 140 8 19 145 4 18 145 4 18 140 4 19
3 80 145 4 19 150 8 19 160 8 23 160 8 18 160 8 18 153 4 19
4 100 165 8 19 175 8 19 185 8 23 180 8 18 180 8 18 191 8 19
5 125 200 8 19 210 8 23 225 8 25 210 8 18 210 8 18 216 8 22
6 150 230 8 19 240 8 23 260 12 25 240 8 18 240 8 23 542 8 22
8 200 280 8 23 290 12 23 305 12 25 295 8 23 295 12 23 299 8 22
10 250 345 12 23 355 12 25 380 12 27 350 12 23 355 12 27 362 12 25
12 300 390 12 23 400 16 25 430 16 27 400 12 23 410 12 27 432 12 25
14 350 435 12 25 445 16 25 480 16 33 460 16 23 470 16 27 476 12 29
16 400 495 16 25 510 16 27 540 16 33 515 16 27 525 16 30 540 16 29
18 450 555 16 25 565 20 27 605 20 33 565 20 27 585 20 31 578 16 32
20 500 605 20 25 620 20 27 660 20 33 620 20 27 650 20 33 635 20 32
22 550
24 600 715 20 27 730 24 33 770 24 39 725 20 30 770 20 36 750 20 35
26 650
28 700 820 24 27 840 24 33 875 24 42 840 24 30 840 24 36 864 28 35
30 750 880 24 33 900 24 33 935 24 42 30 914 28 35
32 800 930 24 33 950 28 33 990 24 48 950 24 33 950 24 39 978 28 41
34 850
36 900 1030 24 33 1050 28 33 1090 28 48 1050 28 33 1050 28 39 1086 32 41
40 1000 1130 28 33 1160 28 39 1210 28 56 1160 28 36 1170 28 42 1200 36 41
42 1050
※ Dimensions and weight are subject to change without prior notice.

Concentric Butterfly Valve 27

 Concentric Butterfly Valve

Lug Type

Elevation Cross-sectional Size 10” ~ 12”

Size Top flange to ISO 5211

ØD Ød L h1 h2 h3 O
Inch mm Type ØN ØP m ØS
1.5 40 86 40 40 54 122 35 F7 90 70 4 9 10
2 50 105 52 43 57 129 35 F7 90 70 4 9 11
2.5 65 114 65 46 67 139 35 F7 90 70 4 9 11
3 80 129 80 46 78 156 35 F7 90 70 4 9 11
4 100 155 100 52 103 164 35 F7 90 70 4 9 11
5 125 180 125 56 107 187 35 F7 90 70 4 9 12
6 150 207 150 56 122 200 35 F7 90 70 4 9 12
8 200 260 198 60 165 238 35 F7 90 70 4 9 13
10 250 331 248 68 215 286 45 F10 125 102 4 12 15
12 300 377 298 78 245 316 45 F10 125 102 4 12 15
14 350 416 327 78 272 345 45 F10 125 102 4 12 20
16 400 475 387 102 304 382 70 F14 175 140 4 18 23
18 450 535 438 114 333 400 70 F14 175 140 4 18 23
20 500 590 477 127 370 438 80 F16 210 165 4 20 34
22 550 680 518 140 413 475 80 F16 210 165 4 20 34
24 600 695 560 154 430 510 80 F16 210 165 4 20 34
26 650 735 585 165 455 530 80 F16 210 165 4 20 34
28 700 800 690 165 490 580 90 F16 210 165 4 20 35
30 750 857 729 180 535 585 90 F25 300 254 4 22 35
32 800 920 785 190 580 630 90 F25 300 254 6 22 35
34 850 945 820 200 590 660 90 F25 300 254 6 22 35
36 900 1000 870 203 650 700 100 F25 300 254 6 22 38
40 1000 1095 960 216 700 750 100 F25 300 254 6 22 40
42 1050 725 820 100 F25 300 254 6 22 40
※ Dimensions and weight are subject to change without prior notice.

28 [Link]
 Concentric Butterfly Valve

Elevation Cross-sectional Size 16” ~ 40”

Size JIS 5K KS, JIS 10K JIS 16K(20K) BS4504 PN10 BS4504 PN16 ANSI 150 LB
Inch mm ØC F ØE ØC F ØE ØC F ØE ØC F ØE ØC F ØE ØC F ØE
1.5 40 95 4 15 105 4 19 105 4 19 110 4 18 110 4 18 98.5 4 16
2 50 105 4 15 120 4 19 120 8 19 125 4 18 125 4 18 121 4 19
2.5 65 130 4 15 140 4 19 140 8 19 145 4 18 145 4 18 140 4 19
3 80 145 4 19 150 8 19 160 8 23 160 8 18 160 8 18 153 4 19
4 100 165 8 19 175 8 19 185 8 23 180 8 18 180 8 18 191 8 19
5 125 200 8 19 210 8 23 225 8 25 210 8 18 210 8 18 216 8 22
6 150 230 8 19 240 8 23 260 12 25 240 8 18 240 8 23 542 8 22
8 200 280 8 23 290 12 23 305 12 25 295 8 23 295 12 23 299 8 22
10 250 345 12 23 355 12 25 380 12 27 350 12 23 355 12 27 362 12 25
12 300 390 12 23 400 16 25 430 16 27 400 12 23 410 12 27 432 12 25
14 350 435 12 25 445 16 25 480 16 33 460 16 23 470 16 27 476 12 29
16 400 495 16 25 510 16 27 540 16 33 515 16 27 525 16 30 540 16 29
18 450 555 16 25 565 20 27 605 20 33 565 20 27 585 20 31 578 16 32
20 500 605 20 25 620 20 27 660 20 33 620 20 27 650 20 33 635 20 32
22 550
24 600 715 20 27 730 24 33 770 24 39 725 20 30 770 20 36 750 20 35
26 650
28 700 820 24 27 840 24 33 875 24 42 840 24 30 840 24 36 864 28 35
30 750 880 24 33 900 24 33 935 24 42 30 914 28 35
32 800 930 24 33 950 28 33 990 24 48 950 24 33 950 24 39 978 28 41
34 850
36 900 1030 24 33 1050 28 33 1090 28 48 1050 28 33 1050 28 39 1086 32 41
40 1000 1130 28 33 1160 28 39 1210 28 56 1160 28 36 1170 28 42 1200 36 41
42 1050
※ Dimensions and weight are subject to change without prior notice.

Concentric Butterfly Valve 29

 Concentric Butterfly Valve

Flange Type

Elevation Cross-sectional

Size Top flange to ISO 5211

ØD Ød L h1 h2 h3 O
Inch mm Type ØN ØP m ØS
1.5 40 86 40 40 54 122 35 F7 90 70 4 9 10
2 50 105 52 43 57 129 35 F7 90 70 4 9 11
2.5 65 114 65 46 67 139 35 F7 90 70 4 9 11
3 80 129 80 46 78 156 35 F7 90 70 4 9 11
4 100 155 100 52 103 164 35 F7 90 70 4 9 11
5 125 180 125 56 107 187 35 F7 90 70 4 9 12
6 150 207 150 56 122 200 35 F7 90 70 4 9 12
8 200 260 198 60 165 238 35 F7 90 70 4 9 13
10 250 331 248 68 215 286 45 F10 125 102 4 12 15
12 300 377 298 78 245 316 45 F10 125 102 4 12 15
14 350 416 327 78 272 345 45 F10 125 102 4 12 20
16 400 475 387 102 304 382 70 F14 175 140 4 18 23
18 450 535 438 114 333 400 70 F14 175 140 4 18 23
20 500 590 477 127 370 438 80 F16 210 165 4 20 34
22 550 680 518 140 413 475 80 F16 210 165 4 20 34
24 600 695 560 154 430 510 80 F16 210 165 4 20 34
26 650 735 585 165 455 530 80 F16 210 165 4 20 34
28 700 800 690 165 490 580 90 F16 210 165 4 20 35
30 750 857 729 180 535 585 90 F25 300 254 4 22 35
32 800 920 785 190 580 630 90 F25 300 254 6 22 35
34 850 945 820 200 590 660 90 F25 300 254 6 22 35
36 900 1000 870 203 650 700 100 F25 300 254 6 22 38
40 1000 1095 960 216 700 750 100 F25 300 254 6 22 40
42 1050 725 820 100 F25 300 254 6 22 40
※ Dimensions and weight are subject to change without prior notice.

30 [Link]
 Concentric Butterfly Valve

Elevation Cross-sectional Size 16” ~ 40”

Size JIS 5K KS, JIS 10K JIS 16K(20K) BS4504 PN10 BS4504 PN16 ANSI 150 LB
Inch mm ØC F ØE ØC F ØE ØC F ØE ØC F ØE ØC F ØE ØC F ØE
1.5 40 95 4 15 105 4 19 105 4 19 110 4 18 110 4 18 98.5 4 16
2 50 105 4 15 120 4 19 120 8 19 125 4 18 125 4 18 121 4 19
2.5 65 130 4 15 140 4 19 140 8 19 145 4 18 145 4 18 140 4 19
3 80 145 4 19 150 8 19 160 8 23 160 8 18 160 8 18 153 4 19
4 100 165 8 19 175 8 19 185 8 23 180 8 18 180 8 18 191 8 19
5 125 200 8 19 210 8 23 225 8 25 210 8 18 210 8 18 216 8 22
6 150 230 8 19 240 8 23 260 12 25 240 8 18 240 8 23 542 8 22
8 200 280 8 23 290 12 23 305 12 25 295 8 23 295 12 23 299 8 22
10 250 345 12 23 355 12 25 380 12 27 350 12 23 355 12 27 362 12 25
12 300 390 12 23 400 16 25 430 16 27 400 12 23 410 12 27 432 12 25
14 350 435 12 25 445 16 25 480 16 33 460 16 23 470 16 27 476 12 29
16 400 495 16 25 510 16 27 540 16 33 515 16 27 525 16 30 540 16 29
18 450 555 16 25 565 20 27 605 20 33 565 20 27 585 20 31 578 16 32
20 500 605 20 25 620 20 27 660 20 33 620 20 27 650 20 33 635 20 32
22 550
24 600 715 20 27 730 24 33 770 24 39 725 20 30 770 20 36 750 20 35
26 650
28 700 820 24 27 840 24 33 875 24 42 840 24 30 840 24 36 864 28 35
30 750 880 24 33 900 24 33 935 24 42 30 914 28 35
32 800 930 24 33 950 28 33 990 24 48 950 24 33 950 24 39 978 28 41
34 850
36 900 1030 24 33 1050 28 33 1090 28 48 1050 28 33 1050 28 39 1086 32 41
40 1000 1130 28 33 1160 28 39 1210 28 56 1160 28 36 1170 28 42 1200 36 41
42 1050
※ Dimensions and weight are subject to change without prior notice.

Concentric Butterfly Valve 31

 Butterfly Valve for Marine (JIS F7480) /
Long face-to-face dimension

Standard Specifications

● DESIGN
JIS F7480

● FACE-TO FACE
JIS F7480

● FLANGE STANDARD
JIS B2210 – 5K / 10K

● PRESSURE RATING
JIS 5K 10K

● NOMINAL DIAMETER
DN 50 to DN 1200

● TESTING
JIF 7400

Applicable Materials
Body FC200, FCD400/450, SC480
Disc SCS13/14, BC6, AL BC3
Seat EPDM, NBR, FKM
Stem SUS 410/304/316

32 [Link]
 Butterfly Valve for Marine (JIS F7480)
Long face-to-face dimension

Wafer / Flange Type

Size Wafer Flange Top flange to ISO 5211

ØD Ød h1 h2 h3 O
Inch mm L L ØN ØP m ØS
2 50 105 52 43 40 57 129 3 90 70 4 9 11
2.5 65 114 65 46 40 67 139 35 90 70 4 9 11
3 80 129 80 46 60 78 156 35 90 70 4 9 11
4 100 155 100 52 60 103 164 35 90 70 4 9 11
5 125 180 125 56 100 107 187 35 90 70 4 9 12
6 150 207 150 56 100 122 200 35 90 70 4 9 12
8 200 260 198 60 100 165 238 35 90 70 4 9 13
10 250 331 248 68 110 215 286 45 125 102 4 12 15
12 300 377 298 78 110 245 316 125 102 4 12 15
14 350 416 327 78 120 272 345 45 125 102 4 12 20
16 400 475 387 102 130 304 382 70 175 140 4 18 23
18 450 535 438 114 150 333 400 70 175 140 4 18 23
20 500 590 477 127 160 370 438 80 230 165 4 20 34
22 550 680 518 154 170 413 475 80 230 165 4 20 34
24 600 695 560 154 170 430 510 80 230 165 4 20 34
26 650 735 585 165 170 455 530 80 230 165 4 20 34
28 700 800 690 165 180 490 580 90 230 165 4 20 35
30 750 857 729 190 190 535 585 90 300 250 4 22 35
32 800 920 785 190 200 580 630 90 300 250 6 22 35
34 850 945 820 203 210 590 660 90 300 250 6 22 35
36 900 1000 870 203 230 650 700 100 300 250 6 22 38
40 1000 1095 960 216 250 700 750 100 300 250 6 22 40
※ Dimensions and weight are subject to change without prior notice.

Butterfly Valve for Marine(JIS F7480) Long face-to-face dimension 33

 Lined Butterfly Valve

Standard Specifications

● DESIGN
API 609 Cat. A
ISO 5752 Sr. 20
MSS SP 67

● FACE TO FACE
API 609 Cat. A
Wafer and Lugged

● FLANGE STANDARD
ASME B 16.5
BS 4504/EN 1092-1
JIS B2220
Others on request

● PRESSURE RATING
ASME B 16.34
Class 150

● NOMINAL DIAMETER
2” to 24”
DN 50 to 600

● TESTING
API 598
High voltage pin hole test

Applicable Materials
Cast Iron A126 CL. B
Ductile Iron A395 Gr.60-40-18, A536 Gr.65-45-12
Austenitic Stainless Steel A351 CF8/CF8M/CF3/CF3M
Duplex Stainless Steel A890 4A/5A/6A, A995 4A/5A/6A
Special Alloy Inconel® 625(UNS N06625), 254SMO®(UNS S31254)
Monel® K400/500(UNS N04400/N05500)

34 [Link]
 Lined Butterfly Valve

Lining materials

PFA
PFA exhibits thermal characteristics like PTFE, being able to withstand super low to high temperature. It is also
transparent and mechanically strong under high temperature. It is easily workable besides applicable with ex-
trusion molding to the same degree as general thermoset plastics. It is used where purity is important, such a
semiconductor wafer baskets, piping couplings and non-corrosive linings. PFA has better mechanical strength
at high temperature than FEP, and excellent moldability for easy processing by extrusion, compression, blow,
transfer and injection molding methods. Due to high bonding strength of carbon, fluorine and oxygen atoms,
PFA demonstrates nearly the same outstanding capabilities as PTFE.

FEP
FEP is a copolymer of tetra-fluoro-ethylene and hexa-fluoro-propylene. FEP consists of carbon and fluorine
atoms, as PTFE does, and has a molecular structure in which one of fluorine atoms bonded to carbon atoms.
FEP has a lower melt viscosity than PTFE and can be processed like other molten thermoplastic resins by extru-
sion, transfer, injection and compression molding. Because the bonding energy between its carbon and fluorine
atoms is so high, and because the carbon chain is completely surrounded by fluorine atoms, FEP fluorocarbon
polymer retains excellent thermal, electrical and chemical stability

PTFE
The fluorine atoms completely cover the carbon chain backbone and protect the carbon-carbon bond from at-
tack. The fluorine atoms are also responsible for low surface energy and exceptional friction characteristics of
PTFE. Because of very high melt viscosity, PTFE does not flow above its melting point. It requires special polymer
processing like past extrusion, compression molding and sintering. Among all the fluoro-plastics products, PTFE
offers the highest heat resistances. It is not corroded d has good electrical insulation and dielectric character-
istics. Moreover, it has a unique non-stick property and the lowest coefficient of friction among solids. It is the
most widely used fluoro-plastic.

Features and Benefits

• Superior bubble tightness by completely lined body with PFA/FEP/PTFE

• Excellent corrosion resistance thanks to the neutral characteristic of PFA/FEP/PTFE
• Improved disc design leading to less deflection at high pressure and tight in-line seal
• Fully encapsulated bottom shaft eliminates potential leak path at bottom of valve
• Cavity-free design making simple sterile cleaning possible and choice of body material independent from
medium
• Extended body and disc liner above the shaft seals provides optimum protection of shaft seals
• Low operating torque and no frictional electricity
• Easy exchange of wearing parts because of the two-piece body design
• Long service life despite of high switching cycle and varying temperature

Lined Butterfly Valve 35

 Lined Butterfly Valve

Lug Type

Elevation Cross-sectional

Size Stem Top Flange to ISO 5211

I A B C D E P T Key
Inch mm b1 a(K) J Type M (F) (S) (W) n Z
( axb )
1.5 40 40 33 50 100 150 80 10 32 6x6 3.5 6 (9.5) 14 F07 90 55 3 70 4 9.5

2 50 50 43 55 120 175 92 10 32 6x6 3.5 6 (9.5) 14 F07 90 55 3 70 4 9.5

2.5 65 64 46 65 130 195 106 11 32 6x6 3.5 6 (9.5) 14 F07 90 55 3 70 4 9.5

3 80 76 46 75 140 215 122 11 32 6x6 3.5 6 (9.5) 16 F07 90 55 3 70 4 9.5

4 100 102 52 95 160 255 150 12 32 6x6 3.5 6 (12.5) 16 F07 90 55 3 70 4 9.5

5 125 127 56 115 180 295 178 12 32 6x6 3.5 6 (12.5) 19 F07 90 55 3 70 4 9.5

6 150 146 56 130 205 335 206 12 40 8x7 3.5 6 (15.0) 19 F07 90 55 3 70 4 9.5
8 200 197 60 160 230 390 258 14 40 8x7 4.0 8 (15.0) 22 F10 125 72 3 102 4 12
10 250 246 68 195 270 465 324 14 40 8x7 4.0 8 (20.0) 22 F10 125 72 3 102 4 12

12 300 292 78 220 300 520 370 16 40 8x7 4.0 8 (20.0) 28 F10 125 72 3 102 4 12

14 350 330 78 250 340 590 410 16 40 8x7 4.0 8 32 F10 125 72 3 102 4 12
16 400 380 102 300 370 670 418 20 50 12 x 8 5.0 12 38 F14 175 100 4 140 4 18

18 450 430 114 320 400 720 528 20 64 12 x 8 5.0 12 38 F14 175 130 4 140 4 18
20 500 482 127 360 440 800 578 20 64 14 x 9 5.5 14 45 F16 210 130 5 165 4 22

22 550 528 142 420 460 880 636 22 64 16 x 10 6.0 16 55 F16 210 130 5 165 4 22
24 600 575 154 450 500 950 680 22 100 16 x 10 6.0 16 55 F16 210 130 5 165 4 22

※ Dimensions and weight are subject to change without prior notice.

36 [Link]
 Lined Butterfly Valve

Wafer Type

Elevation Cross-sectional

Size Stem Top Flange to ISO 5211

I A B C D E P T Key
Inch mm b1 a(K) J Type M (F) (S) (W) n Z
( axb )
1.5 40 40 33 50 100 150 80 10 32 6x6 3.5 6 (9.5) 14 F07 90 55 3 70 4 9.5

2 50 50 43 55 120 175 92 10 32 6x6 3.5 6 (9.5) 14 F07 90 55 3 70 4 9.5

2.5 65 64 46 65 130 195 106 11 32 6x6 3.5 6 (9.5) 14 F07 90 55 3 70 4 9.5

3 80 76 46 75 140 215 122 11 32 6x6 3.5 6 (9.5) 16 F07 90 55 3 70 4 9.5

4 100 102 52 95 160 255 150 12 32 6x6 3.5 6 (12.5) 16 F07 90 55 3 70 4 9.5

5 125 127 56 115 180 295 178 12 32 6x6 3.5 6 (12.5) 19 F07 90 55 3 70 4 9.5

6 150 146 56 130 205 335 206 12 40 8x7 3.5 6 (15.0) 19 F07 90 55 3 70 4 9.5
8 200 197 60 160 230 390 258 14 40 8x7 4.0 8 (15.0) 22 F10 125 72 3 102 4 12
10 250 246 68 195 270 465 324 14 40 8x7 4.0 8 (20.0) 22 F10 125 72 3 102 4 12

12 300 292 78 220 300 520 370 16 40 8x7 4.0 8 (20.0) 28 F10 125 72 3 102 4 12

14 350 330 78 250 340 590 410 16 40 8x7 4.0 8 32 F10 125 72 3 102 4 12
16 400 380 102 300 370 670 418 20 50 12 x 8 5.0 12 38 F14 175 100 4 140 4 18

18 450 430 114 320 400 720 528 20 64 12 x 8 5.0 12 38 F14 175 130 4 140 4 18
20 500 482 127 360 440 800 578 20 64 14 x 9 5.5 14 45 F16 210 130 5 165 4 22

22 550 528 142 420 460 880 636 22 64 16 x 10 6.0 16 55 F16 210 130 5 165 4 22
24 600 575 154 450 500 950 680 22 100 16 x 10 6.0 16 55 F16 210 130 5 165 4 22

※ Dimensions and weight are subject to change without prior notice.

Lined Butterfly Valve 37

 Cartridge Rubber Butterfly Valve
CLASS 300 with Full Lined Body

Standard Specifications

● DESIGN
API 609 Cat. A
ISO 5752 Sr. 20
MSS SP 67

● FACE-TO FACE
API 609 Cat. A
Wafer and Lugged

● FLANGE STANDARD
ASME B 16.5
BS 4504/EN 1092-1
JIS B2220
Others on request

● PRESSURE RATING
20 Bar
285 PSI

● NOMINAL DIAMETER
2” to 24”
DN 50 to 600

● TESTING
Shell : 31 Bar or 450 PSI
Closure : 23 Bar or 325 PSI

Applicable Materials
Cast Iron A126 CL. B
Ductile Iron A395 Gr.60-40-18, A536 Gr.65-45-12
Austenitic Stainless Steel A351 CF8/CF8M/CF3/CF3M
Duplex Stainless Steel A890 4A/5A/6A, A995 4A/5A/6A
Special Alloy Inconel® 625(UNS N06625), 254SMO®(UNS S31254)
Monel® K400/500(UNS N04400/N05500)

Liner Nitrile Rubber with Phenolic Backing

EPDM Rubber with Phenolic Backing

38 [Link]
 Cartridge Rubber Butterfly Valve
CLASS 300 with Full Lined Body

Benefits of Cartridge type seat

Cartridge design seat

• Elastomer is supported by hard phenolic backing which
eliminates seat shifting during installation
• Seat to disc seal is independent of flange support and capa-
ble of full rated dead end service
• Static seat design allows disc to sweep into seat for lower,
Cartridge design seat and more consistent torque
• Smaller mass of elastomer minimizes seat swell

Tongue-and-Groove design seat

• Dynamics of seat based on being installed between two
flanges making seat subject to distortion during installation
• Standard seat design is not rated for full pressure on dead
end service
• Disc is designed to push into seat causing distortion and in-
Tongue-and-Groove design seat consistent torque
• Overabundance of elastomer exaggerates any swelling

Features
Shaft Flange
Valve Body
• One piece wafer and lugged body for strength and stability in ex-
treme environments
Phenolic Phenolic
• Fluid is completely isolated from the body and other external arts Back Back

• Heavy duty top plate is drilled and slotted to ISO 5211

• Discs have a stream lined design providing higher Cvand lower
pressure drop
• The disc edge is contoured to give a tighter seal with lower torque
Disc Shaft Disc
• A self lubricated bearing is machined to tolerances to the shaft and
body eliminating side loading of the shaft Secondary
Shaft/Vacuum Seal
• Blow-out proof deign is achieved by utilizing the shaft retainers to
prevent any vertical movement Primary Disc / Seat Seal
Raised Land
• Torque fluctuation is eliminated because of the consistent con-
Primary Vacuum Seal
formity of the seat provided for by the cartridge design. Weld

• The cartridge design allows full field replacement Primary Flange Seal
(Smooth Conduit)
• Large flange seal area assures no leakage ; no need for gaskets or Pipe
O-rings
Secondary Flange Seal

Cartridge Rubber Buttterfly Valve CLASS 300 with Full Lined Body 39
 Operating Options

Throttling Hand-lever
Notched detent plate and positive-stop gripper
with locking lug insures positive locking in any of
10 positions from full open to full closed allowing
the valve to be set in intermediate positions for
throttling service.

Extension
Extends valve operating shaft or input stem, allowing
service in applications where the valve is inaccessible.
Extension can be totally sealed for submersible or
buried service. The mounting flange dimensions are
identical to the corresponding valve.

Gear box
Notched detent plate and positive-stop gripper
with locking lug insures positive locking in any of
10 positions from full open to full closed allowing
the valve to be set in intermediate positions for
throttling service.

40 [Link]
 Operating Options

Hand-lever type

3 Approximated dimensions
Size LEVER
Inch mm HA P
2 50 238.5 227
2.5 65 257.5 227
3 80 272.5 285
4 100 298.0 285
+$

5 125 333.0 285

6 150 365.0 285
8 200 433.0
10 250
12 300

S L

Gear box type

3 Approximated dimensions
Size GEAR
Inch mm HA P ØW
z:

2 50 262.5 130 150

2.5 65 277.5 130 150
3 80 290.5 130 150
4 100 320.0 130 150
5 125 374.0 160 190
6 150 403.0 210 190
+$

8 200 454.0 220 250

10 250 558.0 270 250
12 300 602.5 270 300
14 350 657.0 330 300
16 400 807.0 330 400
18 450 867.0 330 400
20 500 1013.0 330 400
22 550 1059.0 330 400
24 600 1172.0 330 400
28 700 1310.0 330 700
30 750 1355.0 330 700
32 800 1455.0 330 700
36 900 1510.0 330 800
40 1000 1775.0 330 800

Operating Options 41
 Operating Options

Pneumatic-powered
Pneumatic actuators, of which cylinders are the most common, are the devices providing
power and movement to automated systems, machines and processes. A pneumatic cylinder
is a simple, low cost, easy to install device that is ideal for producing powerful liner movement
over a wide range of velocities, and can be stalled without casing internal damage. Adverse
conditions can be easily tolerated such as high humidity, dry and dusty environments and
repetitive clean-down with high pressure hoses.

Electric-powered
An electric actuator is a motor that makes use of electric energy for producing mechanical
energy. These are used in a number of applications and are favored by many industrial users.
One of the greatest benefits of the electric actuators is the accuracy and precision that they
offer. By employing high precision screws and antibacklash mechanisms, users can get ulti-
mate precision and accuracy, resulting in exact processes and results. It is also important to
note that even though the component costs of electric actuators tend to be on the higher
side, still the operational and maintenance costs of these actuators is lower than the pneu-
matic actuators.

Hydraulic-powered
A hydraulic actuator is rugged and suited for high-force applications. It can produce forces 25 times greater than a
pneumatic cylinder of equal size. It also operate in pressures of up to 4000 psi. A hydraulic actuator can hold force and
torque constant without the pump supplying more fluid or pressure due to the incompressibility of fluids. And, it can
have its pump or motor located a considerable distance away with minimal loss of power. However, a hydraulic actuator
requires many companion parts, including a fluid reservoir, motors, pumps, release valves, and heat exchangers, along
with noise-reduction equipment.

42 [Link]
 Operating Options

Pneumatic actuator
Specifications

Service : On-Off, Throttling

Design : Rack-and-Pinion, Scotch yoke
Operating : Double acting, Single acting with spring return
Mounting : Bottom - ISO 5211, Top/Side – VDI/VDE 3845 Namur
Travel range : 90 degree, -5° ~ +5° adjustable stopper
Accessory : Limit switch, Solenoid valve, P-P/E-P/Smart positioner
Air regulator filter, Volume booster, Speed controller, Lock-up valve
Declutchable override gear box

Electric actuator
Specifications

Service : On-Off, Throttling

Enclosure : Weather proof IP 67, NEMA 4 and 4X, or higher grade on request
Power : 110/220 VAC 1 Ph , 380/440 VAC 3 Ph
Travel range : 90 degree -10°~ +10° or Multi-turn
Limit SW : 4 x SPDT ( 2 for close and 2 for open )
Torque SW : 2 X SPDT ( 1 for close and 1 for open )
Other option : Explosion proof enclosure, Water tight enclosure
Potentiometer, Current position transmitter, Proportional control unit
Integral control unit, Signal lamp unit

Hydraulic actuator
Specifications

Service : On-Off,
Design : Rack-and-Pinion, Scotch yoke, Rotary
Operating : Double acting
Travel range : 90 degree, -5° ~ +5° adjustable stopper
Accessory : Limit switch, Solenoid valve
Declutchable override gear box

Operating Options 43
 Engineering Data

Applicable Standards
Design
API 609 Butterfly Valves: Double Flanged, Lug- and Wafer-Type
API 607 Fire Test for Soft-Seated Quarter Turn Valves
API 6FA Specification for Fire Test for Valves
ASME B 16.34 Valves – Flanged, Threaded, and Welding End
MSS SP 67 Butterfly Valves
MSS SP 68 High Pressure Butterfly Valves with Offset Design
BS 5155 Specification for Butterfly Valves
JIS F7480 Shipbuilding – Rubber seat butterfly valves

Face-to-Face Dimensions
ASME B 16.10 Face-to-Face and End-to-End Dimensions of Valve
ISO 5752 Metal Valves for Use in Flanged Pipe Systems –
Face-to-Face and Centre-to-Face Dimensions

Flange Dimensions
ASME B 16.1 Cast Iron Pipe Flanges and Flanged Fittings
ASME B 16.5 Pipe Flanges and Flanged Fittings
ASME B 16.24 Cast Copper Alloy Pipe Flanges and Flanged Fittings
ASME B 16.42 Ductile Iron Pipe Flanges and Flanged Fittings, Classes 150 and 300
ASME B 16.47 Large Diameter Steel Flange
API 605 Large Diameter Steel Flanges : NPS 26 through NPS 60
MSS SP 44 Steel Pipeline Flanges
BS 4504 Circular Flanges for Pipes, Valves and Fittings
EN 1092-1 Circular Flanges for Pipes, Valves, Fittings and Accessories

Inspection and Testing

API 598 Valve Inspection and Testing
FCI 70-2 Control Valve Seat Leakage
ISO 5208 Industrial Valves – Pressure Testing of Metallic Valves
MSS SP 61 Pressure Testing of Steel Valves
MSS SP 6 Standard Finishes for Contact Faces of Pipe Flanges and
Connecting & End Flanges of Valves and Fittings
MSS SP 25 Standard Marking System for Valves, Fittings, Flanges and Unions
MSS SP 53 Quality Standard for Steel Castings and Forgings for Valves,
Flanges and Fittings and Other Piping Components –
Magnetic Particle Exam Method
MSS SP 54 Quality Standard for Steel Castings for Valves, Flanges and
Fittings and Other Piping Components –
Radiographic Examination Method
MSS SP 55 Quality Standard for Steel Castings for Valves, Flanges and
Fittings and Other Piping Components –
Visual Method for Evaluation of Surface Irregularities
MSS SP 82 Valve Pressure Testing Methods
MSS SP 112 Quality Standard for Evaluation of Cast Surface Finishes –
Visual and Tactile Method
MSS SP 137 Quality Standard for Positive Material Identification of Metal Valves,
Flanges, Fittings, and Other Piping Components

44 [Link]
 Face-to-Face Dimension Comparison Table

API 609 BS 5155 ASME B 16.10 ( MSS SP 67/68 ) JIS F7480

LUG- AND LUG AND WAFER

LUG- AND DOUBLE FLANGED DOUBLE MARINE
WAFER- WAFER FLANGED STYLE LUG AND WAFER
NPS NPS WAFER-TYPE (CAT. B) FLANGED HULL
TYPE (CONCENTRIC) GROOVED STYLE (OFFSET)
(mm) (inch) (CAT. B) VALVE
(CAT. A)
LONG SHORT SHORT LONG SHORT LONGNARROWWIDENARROWWIDE
EXTRA WIDE

A GROUP

40 1.5 106 140 33 33 37 38 86

125/150 150 300 600 150 300 600 150 300 600 PN 16 PN 25 PN 16 PN 16 150 150 150 150 150 150 150 300 600
(122)

50 2 43 108 150 43 43 44 46 81 40
65 2.5 46 112 170 46 46 49 51 97 40
80 3 46 48 48 54 203 282 356 114 180 180 114 180 46 64 127 127 46 49 51 97 48 48 54 60
100 4 52 54 54 64 229 305 432 127 190 190 127 190 52 64 127 178 52 56 57 116 54 54 64 60
125 5 56 140 200 56 70 127 190 56 64 65 148 100
150 6 56 57 59 78 267 403 559 140 210 210 140 210 56 76 127 203 56 70 71 148 57 59 78 100
200 8 60 64 73 102 292 419 660 152 230 230 152 230 60 89 152 216 60 71 75 133 64 73 102 100
250 10 68 71 83 117 330 457 787 165 250 250 165 250 68 114 203 381 68 76 79 159 71 83 117 110
300 12 78 81 92 140 356 502 838 178 270 270 178 270 78 114 203 381 78 83 86 165 81 92 140 110
350 14 78 92 117 155 381 762 889 190 290 290 190 290 78 127 203 406 78 92 95 178 92 117 155 120
400 16 102 102 133 178 406 838 991 216 310 310 216 310 102 140 203 406 79 102 105 178 102 133 178 130
450 18 114 114 149 200 432 914 1092 222 330 330 222 330 114 152 203 406 102 114 117 203 114 149 200 150
500 20 127 127 159 216 457 991 1194 229 350 350 229 350 127 152 203 457 111 127 130 216 127 159 216 160
550 22 170
600 24 154 154 181 232 508 1143 1397 267 390 390 267 390 154 178 203 457 154 157 254 154 181 232 170
650 26 559 1245 1448 292 410 170
700 28 610 1346 1549 292 430 292 430 229 180
750 30 165 610 1397 1651 318 450 305 559 165 190
800 32 660 1524 1778 318 470 318 470 241 200
850 34 210
900 36 200 771 1727 2083 330 510 330 510 241 305 559 200 230
950 38 410 530
1000 40 410 550 410 550 300 250
1050 42 251 410 570 305 610 251
1100 44 280
1200 48 276 470 630 470 630 350 381 660 276 300
Engineering Data

1350 54 381 711

1400 56 530 710 390
1500 60 381 762
1600 64 600 790 440

Engineering Data
1650 66 457 864
1800 72 670 870 490 457 914

45
2000 80 760 950 540
46
Hydrostatic Test Criteria

API 598
DN 100 AND CLASS 1500
Required Required Optional
DN > 100 AND CLASS 600

DN 100 AND CLASS > 1500

Required Required Required
DN > 100 AND CLASS > 600
Shell Low-pressure closure High-pressure closure
Valve Type

150 26 400
Class Pressure ( Bar ) Pressure ( PSI ) Duration Pressure ( Bar ) Pressure ( PSI ) Duration Pressure ( Bar ) Pressure ( PSI ) Duration

Ductile iron 50 15 50 15 50 15
300 66 975
Cast Iron ( DN 50 to 300 ) 125 25 350 65 to 150 60 65 to 150 60 65 to 150 60
110% of max 110% of max
Engineering Data

Cast Iron ( DN 350 to 1200 ) 125 19 265 allowable allowable

4 to 7 60 to 100 pressure pressure
Cast Iron ( DN 50 to 300 ) 250 61 875 200 to 300 120 200 to 300 120 200 to 300 120
at 38 at 38
Cast Iron ( DN 350 to 1200 ) 250 37 525
350 300 350 120 350 120
Steel - flange 150 to 2500 ASME B 16.34 ASME B 16.34

[Link]
50 65 80 100 125 150 200 250 300 350 400 450 500 600 650 700 750 800 900 1000 1050 1200
Maximum Allowable Leakage Rates for Closure Tests

All Resilient Seated Valves 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Metal Seated Valves
- Liquid Test ( drops/min ) 0 5 6 8 10 12 16 20 24 28 32 36 40 48 52 56 60 64 72 80 84 96
- Gas Test ( bubbles/min ) 0 10 12 16 20 24 32 40 48 56 64 72 80 96 104 112 120 128 144 160 168 192

ASME B 16.34
Pressure Testing in accordance with ASME B 16.34
Shell test Closure test Optional Gas Closure test

No less than 1.5 NPS 2 15 No less than 1.1 No less than 1.1 NPS 2 15
Pressure ( Bar ) Pressure ( PSI ) Duration Pressure ( Bar ) Pressure ( PSI ) Duration Pressure ( Bar ) Pressure ( PSI ) Requisite

No less than 1.5 times the 38 C times the 100 F times the 38 C times the 100 F NPS 4 Pc 2500
pressure rating, pressure rating, pressure rating, pressure rating, 2 NPS 8 30
2 NPS 8 60 No less than 5.5 bar No less than 80 psi
rounded off to the next higher 1 bar rounded off to the rounded off to the rounded off to the
10 NPS 18 60
increment. next higher 25 psi next higher 1 bar next higher 25 psi NPS 12 Pc 300
increment. 10 NPS 180 increment. increment. 20 NPS 120
 Pressure-Temperature Rating, ASME B 16.1 / 16.24 / 16.34 / 16.42

Standard Class At 38℃ ( Bar)

ASME B 16.34

A105 A182 F11 A182 F22 A182 F304 A182 F316 A182 F304L A182 F51
A350 LF2 A182 F316L A182 F53
A216 WCC A352 LCB A217 WC6 A217 WC9 A351 CF8 A351 CF8M A351 CE8MN A494 N-12MV
A352 LCC A351 CF3 A351 CF3M A351 CD4MCuN A494 CW-12MW
A351 CD3MWCuN
150 19.6 19.8 18.4 19.8 19.8 19.0 19.0 15.9 20.0 15.9
300 51.1 51.7 48.0 51.7 51.7 49.6 49.6 41.4 51.7 41.4
600 102.1 103.4 96.0 103.4 103.4 99.3 99.3 82.7 10.4 82.7
900 153.2 155.1 144.1 155.1 155.1 148.9 148.9 124.1 155.1 124.1
1500 255.3 258.6 240.1 258.6 258.6 248.2 248.2 206.8 258.6 206.8
2500 425.5 430.9 400.1 430.9 430.9 413.7 413.7 344.7 430.9 344.7
4500 765.9 775.7 720.3 775.7 775.7 744.6 744.6 620.5 775.7 620.5

A126 CL.B A126 CL.B A126 CL.B

ASME B 16.1 ASME B 16.42 ASME B 16.24

A395 B62 C83600 B61 C92200 B148 C95200

NPS 1-12 NPS 14-24 NPS 30-48
125 13.8 10.3 10.3
250 34.5 20.7 20.7
150 17.2 15.5 15.5 13.4
300 44.1 34.5 34.5 35.6
600 71.1
900 106.6
Engineering Data

1500 177.6
2500 295.8

Engineering Data
47
[Link] dk@[Link]
Tel. +82-51-305-3770 | Fax. +82-51-305-3737
143, Daejeojungang-ro 286beon-gil, Gangseo-gu, Busan, Korea. 46702