BETTER DRILLING FLUID EQUIPMENT INDUSTRIAL LIMITED

[Link]

Inquiries Sales Tel.:0086-534-5737702

DRILLING FLUID & WASTE MANAGEMENT EQUIPMENT

SOLID CONTROL-RECYCLING-DISPOSAL

DRILLING FLUID SOLUTION

0 / 37
BETTER Drilling Fluid Equipment Industrial Limited is an international company focusing on heavy-duty
centrifugal sand pump & parts, drilling fluid & waste management equipment. We pay continuous attention on
quality improve, and constantly introduce and combining domestic and foreign advanced technology to improve
our own quality, and our products have been exported to many countries and regions in the world at present.
Our BETTER heavy-duty centrifugal sand pumps adopt the most reasonable structure design, to provide cost-
effective choice for users at home and abroad, and our pump and parts are interchangeable with the well-known
brand centrifugal pump and parts completely; and we also offer a complete scope of solid control equipment to
meet all the drilling-waste management needs, from optimized solid control, recycling and recovery, to treatment
and disposal. BETTER has the capacity of providing one-stop drilling fluid solution for the worldwide drilling
contractors and strive to develop to be a world-class solids control-cuttings management-drilling fluid processing
equipment supplier.

1 / 37
BETTER Heavy-duty centrifugal pumps Drilling Waste Management Equipment & System

Mission Magnum Style Waste Decanter Centrifuge

MCM 250 Style Vertical Cutting Dryer
Mission Sandmaster Style High G Drying Shaker
Mission XP Style Screw Conveyor
Spacesaver Style Screw Pump
Magnum Vertical Style Submersible Slurry pump
Pump Spare Parts Sand Pump

Solid Control Products & System Solid Control Accessories

Shale Shaker Shaker Screens

Mud Cleaner Hydrocyclones
Drilling Fluid De-sander Butterfly Valve
Drilling Fluid De-silter Mud Gate Valve & Repair Kits
Decanting Centrifuge Air O Grip Union & Air Tube
Vacume Degasser Tank Unions
Jet Mud Mixer Hammer Union & Union Seals
Mud Hopper Rubber Joints
Mud Agitator Expansion Joints
Mud Gun Rig Mattings
Shear pump Pressure Gauge
Water Gas Separator
Flare Igniter
Mud Tank & Mud System

 Oil & Gas Drilling – Solid Control System & Drilling Waste Management
 CBM and Geothermal Well Drilling- Drilling Mud Cleaning System
 HDD & Underground System- Mud Recycling System
 Mining and Environment –Fluid Solid Separation System
 Tunnel Boring Machine Project
 Dredging Slurry Separation

2 / 37
Detailed/Patience/Professional

Detailed introduce equipment information, performance and quality, be patient to handle product inquiry and
technical consultation, to provide the professional design scheme and optimal proposal.

Strict quality control and feedback frequently to the clients about the production, quality inspection at any time;
to deliver on schedule with due quality; Follow up the shipment status and offer collaboration guide on-site
installation.

Provide 12 Months guarantee after commissioning or 18 Months after shipment whichever comes first;

24 hours free telephone service and 12 hours online counseling, to guide the user to solve any question when
the equipment was run on site; regularly follow up the working condition and maintenance and support some
proposal.
3 / 37
BETTER Mission Magnum style Centrifugal Pump

It has an open impeller design that contains wide-tipped vanes and a more tangential circumference of the
suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. It is available in hard
ductile iron, high chrome alloy, stainless steel, and aluminum bronze fluid ends. The pumps can be unitized with
electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration). Sizes
from 3x2x13 to 10x8x14.

Feature:

 Heavy-duty frame design;

 One-piece concentric and thicker casing;
 Same power end, to reduce greatly spares
inventory;
 Open impeller with wider vanes for high viscosity
drilling fluid transferring;
 High quality [Link] angular contact bearings
and I.B. bearing of single roller bearing;
 Tungsten-Tungsten mechanical seals and 3-
piece back-up packing;
 External adjustment of impeller clearance extends pump performance life;
 Replaceable with other popular brand pumps by same pedestal size.

BETTER MCM 250 style Centrifugal Pump

It has a semi-open impeller design that contains wide-

tipped vanes and a more tangential circumference of the
suction allowing the pump to create a smoother flow
pattern when handling abrasive fluids. It is available in
hard ductile iron fluid ends. The pumps can be unitized
with electric motors, diesel engines, and hydraulic motors
(horizontal, vertical, or close-coupled configuration).
Sizes from 3x2x13 to 10x8x14.

Feature:

 All sizes use the same power end;

4 / 37
  Heavy-duty Solid frame design;
 One-piece concentric and thicker casing;
 Wide semi-open impeller creates lower axial thrust for improved bearing life;
 High quality [Link] angular contact bearings and I.B. bearing of single roller bearing;
 Tungsten-Tungsten mechanical seals and 3-piece back-up packing;
 Replaceable with other popular brand pumps by same pedestal size.

BETTER Mission Sandmaster style Centrifugal Pump-Short Frame

It has more compact design and can be adapted for

hydraulic motor drive. These features make it ideal for
use in application such as oilfield frac truck, cementing,
charge pump for water well drilling. The frame and shaft
has been shorten 4” to compare with the general series.
It is a choice when space is a premium and prime mover
options and limited. Sizes from 3x2x13 to 10x8x14.

Feature:

 Wear resistant material extends running time;

 Compact frame design for small space;
 Multiple application in the oil and gas industrial;
 Full open impeller reduces shaft loading;
 Replaceable with other popular brand pumps by same pedestal size.

BETTER Mission Spacesaver style Centrifugal Pump – Close Coupled

It has a very small foot print for applications where space

is a premium. These heavy duty pumps require minimum
mounting space and are close-coupled, eliminating
couplings and coupling alignment considerations. The
SpaceSaver pump has proven in mud pump liner coolant
service, general rig water supply, micro-tunneling mud
mixing and a variety of additional applications. Sizes from
1x1½ to 3x4.

Feature:

 Small foot print design for small space;

5 / 37
  Full open impeller reduces shaft loading;
 3 rings of conventional packing back up standard mechanical seal to provide the utmost reliability and
minimal maintenance.

BETTER Mission XP style Centrifugal Pump - Large Volume

It is ideally suited for pumping high volumes of heavy slurries that are abrasive, corrosive. An excellent choice
for high volume mobile and stationary applications where a small footprint is critical. The low stuffing box pressure
can increase seal life approximately 50%. The extra-heavy shaft is designed for minimum deflection. The heavy
duty bearings are permanently lubricated to minimize maintenance. Sizes 8X6X18, 12x10x23 and 14x12x24.

Feature:

 Full-open wide impeller;

 Long life no adjustment mechanical seal available
for near zero leakage;
 Thick, concentric casing with replaceable casing
wear pad;
 Hard iron and high chrome alloy material optional;
 Large power to ensure large flow rates and head
pressure up to 500ft;
 Small footprint design is versatile for mobile and
stationary application;
 100% compatible with current market offerings.

BETTER Mission Magnum Vertical style Centrifugal Pump

The Vertical centrifugal pump provides the good solution for those small space on the
floor. Common applications include Mud Pumping-offshore/onshore, Solids Control,
and Dredging.

 Feature:
 Including all of the features of horizontal mission magnum style pump;
 Special vertical design for those solution with limited space;
 Close-coupled ex-proof motor drive;
 Casing and fluid end parts are interchangeable with those horizontal pumps.

6 / 37
Pump Spare Parts

All BETTER pumps are built using the excellent quality components, and its parts are 100% identical in all
dimensions to Mission, Halco, SPD Baker Mud Hog, MCM 250 series, Mattco, Harrisburg, and etc. Including
casing assy., impeller(open & semi-open), stuffing box, wear pad, mechanical seal, shaft, shaft sleeve, shaft
packing, power end gaskets, fluid end gaskets, oil seal kits, inboard bearing, outboard bearing, bearing covers,
housing, etc.

HIGH G DRYING SHAKER (HI-G DRYER)

Processing those drilling cuttings from the primary solid control equipment (shale shaker, D-sander, D-
silter) to dry them for transportation;
First-stage in the waste management processing system, to match with vertical cutting dryer to work;
Special structure, long shaker deck and stable
processing result, linear vibration motion
Delivers high-capacity separation efficiency and
operation flexibility;
Durable pretension composite screens, provides
longer screen life and larger screening area;
Deliver high processing capacities, flexible fluid
distribution, generate drier cuttings, lowers solid
waste volume and reduce the drilling waste
disposal cost

7 / 37
 Up to 8.0G operation mode, adjustable vibration frequency, high efficiency, enhance overall solids control
efficiencies
Vibrating Motor: Italy OLI /American Martin, IEC Ex and ATEX Option Available
Surface painting & coating with heavy anticorrosive brand paint
Wedged Type Shaker Screen for fast screens changing
Electrical control system: Explosion-proof electrical system and ABB or Siemens, Schneider electrical
components.

Basic technical specification

 Vibratory Motion Type Linear Motion, Adjustable G force ≤8.0G
 Capacity up to 150m3/h (660GPM)
 Screen Deck angle range -1°~+5°adjustable by electrical or manual, Vibration Amplitude 4.4~6.34mm
 Screen area 585×1165mm 2.73m2 Composite frame or metal frame for optional 4 pcs
 Motor specifications 1.94Kw 2 pcs, ExdIIBt4 / IEC EX/ ATEX
 Feeding type Hopper feeder

HIGH-SPEED VFD DECANTER CENTRIFUGE

Special designed for drilling waste management with superior high G force and high speed for separate
the fine solids (≥2μm);
Speed ranging from 0 to 3900 and generate
centrifugal force of 3000G;
High speed variable frequency centrifuge with its
unique advantages;
Longer bowl, offers big volume, generates High-G
force, slow the drilling fluids, much drier and finer
separation point occur
Stainless steel bowl, scroll, compartment are
available and covered with corrosion-proof coating
so as to have longer lifespan;
German FAG or Swedish SKF brand bearings are
available;
Electrical Components complies with SIEMENS/Schneider ATEX or IEC Ex.
Screw pump and submersible slurry pump are provided for centrifuge liquid feeding for various customers.

8 / 37
Basic technical specification LW550G-VFD

 Hydraulic capacity: 484GPM (110M3/h)

 Effective capacity: 400GPM(90m3/h)
 Operation speed: 3000PRM
 Max. G-Force: 2719 Typical G force: 0~1888
 Bowl Diameter: 550mm
 Bow Length: 1800mm
 Separation point: 2~5μm
 Differential speed: 0~45
 Gearbox Torch: 12000N.M; Gearbox Ration: 57:1
 Main drive motor power: 90KW(120HP); Back drive motor power: 37KW(50HP); Recommend feeding
pump power: 22KW(30HP)
 EX standard: ExdIIBt4 / IEC EX/ ATEX
 Electric Cabinet: PLC + Positive Pressurized

VERTICAL CUTTING DRYER

Also called vertical centrifuges, widely used in oilfield drilling waste recycling processing;
VCD can reach the performance of oil on the cuttings (OOC) to be 3 % ~5% to meet the requirements of
environmental protection;
Capacity up to be 50 tons per hour;
Especially for drying oil-based and compound-
base drilling cuttings mud, also water-based
drilling fluid
Drying drilling solids from oil or synthetic base
fluids by centrifugal force;
A stainless steel screen bowl traps “wet” solids
and accelerates them up to 900 RPM and 420G;
Tungsten carbide protects the flights from
abrasive solids and ensures long operational life;
Strict balance testing for all major rotary components to minimize vibration & noisy;
With individual oil lubrication system with automatic alarm for pressure limit. The main motor and oil pump
motor is interlocked with each other for avoiding the start of the main motor prior to the start of the oil
pump motor;
Screw conveyor equipped on the discharge for transporting the dry cuttings;
Equipped brand screw pump for dryer cuttings cleaning.

9 / 37
Basic technical specification

 Capacity: 30-50 t/h

 Drying Efficiency: OOC≤5%
 Screen Max. Dia.: 930mm
 Screen Opening: 0.25～0.5mm
 Rotation Speed: 0～900 rpm
 Oil tank volume: 48l
 Air Knife input pressure: 0.69Mpa
 Air knife input capacity: 1.8m3/m
 Main motor power 55(75HP)
 Oil pump power 0.55(0.75HP)
 Discharge Auger power 4kw(5HP)
 Flushing pump: on request 1 set, power 3KW(4HP)
 Ex standard ExdIIBt4/IECEX/A-TEX
 Electric Cabinet PLC+Positive pressurized
 Weight 4400kgs Dimension: 2640x1810x1650mm

SCREW PUMP

G Series Screw Pump, ideally for decanter centrifuge feeding, without shearing and agitating, evenly
transfer fluid along axial direction;
The rated discharge pressure increases by the pump grade rising, and each grade rising brings the
pressure increase 0.6 MPa;
Stainless steel Shaft and elastomeric stator, rotor and stator replaceable;
Suitable to transfer the fluids of high viscosity with
hard suspended particles;
Compact structure, small volume and easy
maintenance. Rotor and stator, wearing parts of
this pump, are convenient to replace.
Driven by variable speed motor to connect by
coupling, V-belts or gearbox

Technical Parameter
Model Flow Pressure Max. Speed Motor Power Inlet Size Outlet Size
G20-04 10 m3/h 3Bar 244RPM 4Kw 80mm 80mm
G20-5.5 20 m3/h 3Bar 210RPM 5.5Kw 80mm 80mm
G30-7.5 30 m3/h 3Bar 258RPM 7.5Kw 100mm 100mm

10 / 37
 G40-11 40 m3/h 3Bar 252RPM 11Kw 125mm 125mm
G50-11 50 m3/h 3Bar 273RPM 15Kw 125mm 125mm
G60-15 60 m3/h 3Bar 225RPM 18.5Kw 125mm 125mm
G70-22 70 m3/h 3Bar 230RPM 22Kw 150mm 150mm
G80-22 80 m3/h 3Bar 283RPM 22Kw 150mm 150mm
G90-22 90 m3/h 3Bar 205RPM 22Kw 150mm 150mm

For some applications, horizontal centrifugal pump and submersible slurry pump are requested to feed drilling
mud to the decanter centrifuge.

CENTRIFUGAL SAND PUMPS

BETTER offers a complete line of centrifugal sand pumps, sizes range from 3x2 to 10x8;
Bare pumps, horizontal packages, vertical packages, overhead belt driven configurations are available,
starters are optional;
Explosion-proof electric motors are available up to
200HP in 1200, 1500, 1800, 2400, 3600 RPM;
To transfer the drilling fluid in the solid control
system, feeding desander, desilter, shale shaker
and centrifuge, or to match with mud hopper for
mud mixer, or as charging pump of mud pump,
playing an important role;
Completely identical size with those brand pumps
in the markets; 100% interchangeable spare parts;
Mechanical seal and packing seals are both available.

SUBMERSIBLE SLURRY PUMPS

Vertical single stage and single suction centrifugal pump

Semi-open or open impeller equipped with paddle wheel in the
impeller suction side extension place;
Vertical explosion-proof motor mounted on the base above the fluid
level, coupling connection;
Pump shaft below submerged in the fluid, no bearing, no gland seal;
Suitable for transferring high concentration particles;
The length submerged in the fluid is 800-2500mm on request;
Suction pipe can be equipped if request;

11 / 37
 High hard alloy material adopted, wear resistance, corrosion resistance, and long service life;
Ideal charging pump for decanter centrifuge, shale shaker, desander, desilter.
Technical Parameters
Flow Lift Speed Efficiency Power Dimension Weight
Model
m3/h l/s (m) (rpm) (%) (kW) (mm) (Kg)
50YZ20-18A 10 2.8 10 1430 42 2.2 2710×500×720 364
50YZ20-18 20 5.6 18 1430 42 3 2710×500×720 366
50YZ20-18 30 8.4 10 1430 47 4 2730×500×720 388
50YZ40-10 40 11.2 10 1440 56 5.5 2750×500×720 400
50YZ50-20 50 13.8 20 1440 56 7.5 2810×500×720 583
80YZ80-20A 80 22.2 21 1460 55 11 2650×500×720 610
80YZ80-20 90 25 15.6 1460 51 11 2750×500×720 720
100YZ100-30A 110 30.6 24 1470 54 18.5 2790×600×900 840
100YZ100-30 120 33.3 28 1470 56 22 2810×600×900 880
100YZ160-38 160 44.4 39 1480 52 45 2920×600×900 1300
150YZ250-40B 200 55.6 25 1480 49 37 3160×700×1130 1400
150YZ250-40A 240 66.7 31 1480 50 45 3190×700×1130 1500
1. Submersible length of the pump is 1500mm or customized on request.
Remark 2. Specific gravity 1.2g/cm3 for reference
[Link] explosion-proof motor Ex dⅡ BT4

SCREW CONVEYOR
Screw conveyor (Auger) is popular used in drilling waste management projects for transferring drilling
cuttings with low-cost;
Adopting a multi-sectional composite structure with each section of 12 feet (3.66m), each section
standard length are interchangeable;
The screw conveyor can be flexibly assembled on different drilling sites, with characteristics of simple
operation, stable structure, strong adaptability and high safety, significantly improving the operating
efficiency of equipment and reducing the cost and resources. The flights of screw conveyer adopt wear-
resistant material 16Mn to ensure its service life.
The screw conveyor are manufactured to the highest safety standards and are fitted with protective
grating or cover to prevent foreign bodies entering the conveyor system, and the frame at the bottom
can protect and support the screw conveyor, ensuring its structural stability.

12 / 37
Technical Parameters
Screw Screw Weight Dimension
Model Capacity Power Speed
Diameter Length kg mm
SC12A-24 12 in 24 ft 20 T/h 5.5kw(7.5HP) 1426 9150×450×600
SC12A-36 12 in 36 ft 20 T/h 7.5 kw (10HP) 1855 12950×450×600
SC12A-48 12 in 48 ft 20 T/h 11 kw (15HP) 2318 16750×450×600
SC14A-24 14 in 24 ft 30 T/h 7.5 kw (10HP) 1515 9200×485×650
SC14A-36 14 in 36 ft 30 T/h 11 kw (15HP) 60RPM 2028 13000×485×650
SC14A-48 14 in 48 ft 30 T/h 15 kw (20HP) 2549 16800×485×650
SC16A-24 16 in 24 ft 45 T/h 11 kw (15HP) 1668 9200×545×680
SC16A-36 16 in 36 ft 45 T/h 15 kw (20HP) 2269 13050×545×680
SC16A-48 16 in 48 ft 45 T/h 18.5 kw (25HP) 3344 16950×545×680
Remarks Capacity is for horizontal layout at 60RPM.

DRILLING WASTE MANAGEMENT SYSTEM

Drilling waste management system is used for recycling drilling fluids from drilling cuttings to reuse, and
minimize the drilling waste to save transport cost. It can reduce the OOC to be 3 %~5% for oil-based drilling
cuttings; and for water-based drilling cuttings, it can reduce the water content for each transportation. For a
standard drilling waste management unit, it’s usually built with drying shakers, 1 set vertical cutting dryer, 1 set
decanter centrifuge, 2 sets screw pump for feeding and flushing decanter centrifuge, 2 or more sets screw
conveyor for transporting drilling cuttings, and skid with catching tank for fluids from vertical cutting dryer and
telescopic, electric cradle and control system.

1- Shale Shaker

 2- Mud Cleaner

 3- Screw Conveyor

 4- Vertical cutting dryer

 5- Waste Particle

 6- Recycled mud

 7- Recycled mud tank

 8- Feeding screw pump

 9- Centrifuge

 10- Outlet of waste solid

 11- Clear mud to mud pump

13 / 37
Waste Oily Sand Sludge Treatment & Recycling System

To separate and purify oil, sludge, sand and water from the drilling waste or oil storage tank and reuse
separately, to reduce Environment Pollution and bring economic benefits
To make OOC to be less 2% to meet the environmental protection standard requirement
Large capacity to work continuously 24 hours
Modular design and manufacturing, Compact structure, and easy operation
Consist of Feeding system, Homogeneous tank, Cleaning separation tank, Water heating tank,
Centrifugal sand pump, sand washer, centrifuge, and boiler, etc.
Recycling: Sand to make bricks; Oil to deep processing in refinery; Sludge with small volume and easy
transport; Water to be recycled for cleaning.
Basic technical parameter
Capacity 3-5ton / hour
Total power: 490kw
Oil contents (OOC) ≤ 2%, water contents ≤ 45%
Occupied area: 15x20m

14 / 37
During the drilling process, solids need to be removed from the fluids in order for it to be reused.

There are two options available in order to keep control of the percentage of Solids:

1- Dilution

2- Solids Control Equipment Particle Size (1 μ = 0.0000394 inch)

Category Size Example

Colloidal <2 Bentonite, Clays and very fine solids
Silt 2-74  Barite, Silt and fine solids
Sand 74-2000  Sand and solids
Gravel > 2000  Solids, Gravel and Coal

SHALE SHAKER

First-stage in the process of extracting solids from the drilling fluids or drilling cuttings;

To remove the solids based on the particle size, separated solid particles ≤ 100 microns;

Linear motion, balanced elliptical motion shale shaker and dual motion shale shaker available;

VFD shale shaker available, adjustable vibration frequency;

Heat treatment on complete shale shaker deck for

High G force operation;

High quality paints to provide a good anti-

corrosion protection;

Unique wedge mechanism screen locking to allow

easy &fast screen removal, repair or replacement;

Brand electrical components of ABB, Siemens,

and Schneider adopted;

Brand imported vibration motors of US Martin or Italy OLI adopted, IEC Ex, ATEX and UL Certified;

Flexible feeding type including Weir Feed, Top Feed, and Hopper Feed for different applications;

High G-force, wide screen area, compressed structure, cost-effective, double and triplicate shaker
available.

15 / 37
Technical parameter
Model ZS753-D-3P ZS700-VFD-3P ZS800-3P ZS585-4P ZS585HG-4P
Linear +
Vibration
Balanced Linear Motion
Mode
Elliptical
140m3/h 130m3/h 120m3/h 130m3/h 150m3/h
Capacity
(616GPM) (572GPM) (528GPM) (572GPM) (660GPM)
Vibration 2 x 1.72kw +
2 x 1.5kw 2 x 1.72kw 2x1.86kw 2 x 1.94kw
Motor 1 x 0.4kw
Screen Qty. 3 panels 4 panels
Screen Size 750×1195mm 700×1250mm 700×1050mm 585×1165mm
Screen Area 2.68m2 2.63m2 2.36m2 2.73m2
Adjustable G
≤7.5G ≤8.0G
Force
Vibration
4.14~5.96mm 4.4~6.34mm
Amplitude
Deck Angle
-1°~+5°(Adjustable)
Range
EX Standard ExdIIBt4 / IEC EX/ ATEX
Motor Power 380v @ 50hz, 460v @ 60hz, or customized
Weight (Kg) 1675 1420 1742 1722 1638
2717×1998 2450x1687 2419×2055 2937×1998 2761×1998
Dimension
×1428mm x1420mm ×1474mm ×1428mm ×1428mm
Remarks Specific gravity of mud treated by shale shaker is 1.2g/cm3 ,viscosity:45S,API 40

MUD CLEANER

Combined with Desander, Desilter and an Underflow shale shaker, compact design with small footprint;

Consist of a two-stage separation process using a combination of hydrocyclones mounted over a shale
shaker to operation as a single unit;

16 / 37
 Solids passed through the hydrocylones and separated particles pass through the shaker screens,and
bigger particles remain on the screen and removed manually;

Desander & desilter cones made of Polyurethane ( PU ) or high-chromium cast iron or ceramic;

1-3 pcs Desander cones for optional, each cone can process 500 GPM and makes a separation
between 45 and 75 μm;

8-20 pcs Desilter cones for optional, each cone can process 80 GPM, and makes a separation between
15 and 45 μm;

Effective on both oil-base and water-base weighted and unweighted drilling fluid system in removing
and drying solids;

Minimizing waste generated and reducing disposal costs;

Brand electrical components of ABB, Siemens, and Schneider adopted;

Brand imported vibration motors of US Martin or Italy OLI adopted, IEC Ex, ATEX and UL Certified;

Technical Parameters
Model QJZS800-1S6N QJZS700-1S8N QJZS600-2S12N QJZS600-2S16N
90m3/h 120m3/h 240m3/h 300m3/h
Treating Capacity
396GPM 528GPM 1056GPM 1320GPM
Separation Size 15-75μm
Desander Cones 10"(250mm)×1 10"(250mm)×1 10"(250mm)×2 12"(300mm)×2
Desilter Cones 4"(100mm)×6 4"(100mm)×8 4"(100mm)×12 4"(100mm)×16
Inlet Diameter DN150
Outlet Diameter DN200
Pressure 0.25～0.40MPa
BT-SB5x4x14- BT-SB6x5x14 BT-SB8X6X14 BT-SB8X6X14
Matching Pump
22kw -30kw -55kw -55kw
17 / 37
 Model ZS800-2P ZS700-3P ZS600-3P
Vibrating
Linear Motion
Model
Motor Power 2×1.5kw 2×1.5kw 2×1.5kw
Screen Qty. 2 panel 3 panel 3 panel
Matching
Screen 850×1250mm 700×1050mm 630×1250mm
Shaker
Specification 120～200mesh 120～200mesh 120～200mesh
Screen Area 2.12m2 2.2 m2 2.36 m2
Screen Type Steel Frame Hook strip Steel Frame
Electric Specs 380v @ 50hz, 460v @ 60hz, or customized
EX Standard ExdIIBt4 / IEC EX/ ATEX
Dimension mm 2530×1750×2210 2530×1750×2210 2530×1750×2210 2530×1750×2210
Weight kg 1780 2080 2200 2350
1.4" Cones =10～20m3/h, 10" Cones =90~120m3/h ，12" Cones＞120m3/h
Remark [Link] pump motor power of centrifugal pump is selected as per
S.G. 1.2g/cm3
3. Screens are 120,150,175mesh usually.

DRILLING FLUID DESANDER

Combined with Desander cones and an Underflow shale shaker, compact design with small footprint;

An ideal second-stage separation equipment;

Desander cones made of Polyurethane ( PU ) or high-chromium cast iron or ceramic;

To separate the solids between 45 and 75 μm;1, 2 or 3 pieces of 10" or 12" cones for different
capacities optional;

Clamp type for easy maintenance;

Customized desander acceptable to meet the customer special needs;

Brand electrical components of ABB, Siemens, and Schneider adopted;

Brand imported vibration motors of US Martin or Italy OLI adopted, IEC Ex, ATEX and UL Certified.

Technical Parameters
Model CSQ250×1 CSQ250×1 CSQ250×2 CSQ300×2
90m³/h 120m³/h 240m³/h 300m³/h
Treating Capacity
396GPM 528GPM 1056GPM 1320GPM
Separation Size 40～75μm
Cone Size 10"(250) 10"(250) 10"(250) 12"(300)
Cone Number 1 1 2 2
Pressure 0.25～0.40Mpa
BT-SB5x4x14- BT-SB6x5x14- BT-SB8x6x11- BT-SB8x6x14-
Matching Pump
30kW 37kW 55kW 55kW
Electric Specs 380v @ 50hz, 460v @ 60hz, or customized
EX standard ExdIIBt4 / IEC EX/ ATEX
Inlet Diameter DN150
18 / 37
 Outlet Diameter DN200
Screen
600×1600mm,120-200 mesh
Specification
Bottom Shale Screen Type Soft Hookstrip
Shaker Motor Power 0.4kw x 1
G force ≤7.5Gs
Dimension mm 1200×1200×2000 1470×1400×2000 1500×1750×2020
Weight 585kg 615kg 610kg
1.10"Cones=90~120m3/h ，12" Cones＞120m3/h
[Link] pump motor power of centrifugal pump is selected as per S.G.
Remark 1.2g/cm3
3. Screens are 120,150,175mesh usually.

De-sander Without Underflow Shale Shaker

Model: CSQ -2S / CSQ-3S De-sander

Application: For oil gas drilling un-weighted drilling mud
Result: Wet cuttings, not recommended for Weighted mud and drying solids
Features: No Consumable Screens; Small Footprint; Economic Choice

19 / 37
DRILLING FLUID DESILTER
Combined with Desilter cones and an Underflow shale shaker, compact design with small footprint;

An ideal three-stage separation equipment;

Desilter cones made of Polyurethane (PU) or high-chromium cast iron or ceramic;

To separate the solids of 15 ~ 47 μm; 6, 8, 10, 12 or 16 pcs of 4" cones for different capacities optional;

Customized desilter acceptable to meet the customer special needs;

Brand electrical components of ABB, Siemens, and Schneider adopted;

Brand imported vibration motors of US Martin or Italy OLI adopted, IEC Ex, ATEX and UL Certified.

Technical Parameter
Model CNQ100-6N CNQ100-8N CNQ100-10N CNQ100-12N CNQ100-16N
90m³/h 120m³/h 180m³/h 240m³/h 300m³/h
Treating Capacity
396GPM 528GPM 792GPM 1056GPM 1320GPM
Separation Size 15~47μm
Cone Size 4"(100mm)
Cone Number 6 8 10 12 16
Pressure 0.25~0.40Mpa
BT-SB5×4×14 BT-SB6×5×11 BT-SB6×5×14 BT-SB8×6×11 BT-SB8×6×14
Matching Pump
-22kW -30kW -45kW -55kW -55kW
Electric Specs 380v @ 50hz, 460v @ 60hz, or customized
EX standard ExdIIBt4 / IEC EX/ ATEX
Inlet Diameter DN100 DN150
Outlet Diameter DN125 DN200
Screen 600×1600mm,120-200mesh
Matching Shaker Soft Hook strip
Shaker motor 0.4kW
Dimension mm 1480×1200×1740 1480×1750×1780
Weight 743kg 755kg 768kg 780kg 810kg
1.4" Cones =10～20m3/h
Remark
[Link] pump motor power of centrifugal pump is selected as per S.G. 1.2g/cm3

20 / 37
 Desilter Without Underflow Shale Shaker
Model CNQ -12S / CNQ-16S Desilter
Application For oil gas drilling un-weighted drilling mud
Result Wet cuttings, not recommended for Weighted mud and drying solids
Features Small Footprint; Economic Choice; No Consumable Screens

DECANTING CENTRIFUGE
An ideal forth-stage solid control equipment;

Remove solids of high and low gravity, 2~ 7 μm by centrifugal principle, dry cuttings, barite recovery,
dewatering: Solids and fluids separation with polymer enhancement;

Centrifuge bowl adjustment: deep for an optimum cut, and less depth for more volume, high PRM for
more G force, low RPM for solids with more specific gravity;

Middle-speed & high-speed decanter centrifuges and high-speed variable frequency centrifuge;

Brand electrical components of ABB, Siemens, and Schneider adopted;

Speed can be up to 3500rpm and varied frequency driven.

Technical Parameter
LW LW LW LW LW
Model
350-1000N 450-842N 450-1000N 600-1019N 700-1200N
Max capacity 30 m3/h 40m3/h 50m3/h 60m3/h 90m3/h
Main motor 22kW 30kW 37kW 45kW 55kW
Back motor 5.5kW 5.5kW 7.5kW 11kW 22kW
Feeding pump 5.5kW 5.5kW 5.5kW 7.5kW 11kW
Separation Point 5～7μm
Electric Specs 380V/50HZ or 460V/60HZ or customized
Bowl Dia. 350mm 450mm 450mm 600mm 700mm
Bowl length 1000mm 842mm 1000mm 1019mm 1200mm
Bowl speed 3200rpm 2200rpm 2200rpm 1800rpm 1480rpm

21 / 37
 Separation factor 2007G 1220G 1220G 1088G 859G
2350×1620 2350×1620 2350×1620 2950×1620 3300×1820
Dimension
×1950mm ×1950mm ×1950mm ×1950mm ×2180mm
Weight 3000 kg 3000kg 3000kg 3800 kg 4500 kg

VACUUM DEGASSER
Remove the small entrained gas bubbles suspended in the drilling fluid by gas separator such as H2S,
CO2, and natural gas;

Positioned after shale shaker before hydrocyclones and centrifuge;

As a large agitator for the drilling mud to help desander and desilter’s treatment;

Brand electrical components of ABB, Siemens, and Schneider adopted;

Explosion-proof motor adopted.

Technical Parameters
Model ZCQ240 ZCQ270 ZCQ300 ZCQ360
Main Diameter 700mm 800mm 900mm 1000mm
Treating Capacity ≤240 m3/h ≤270 m3/h ≤300 m3/h ≤360 m3/h
22 / 37
 Vacuum -0.02～-0.04MPa -0.02～-0.04MPa -0.030～-0.055MPa -0.040～-0.065MPa
Speed 860rpm 870rpm 876rpm 880rpm
Efficiency ≥95%
Electric Specs 380V/50HZ Or 460V/60HZ Or customized
EX Standard ExdⅡBT4
Inlet Diameter 114mm 133mm 159mm 159mm
Outlet Diameter 140mm 159mm 219mm 219mm
Motor Power 15kW 22kW 30kW 37kW
Vacuum Power 2.2kW 3kW 4kW 7.5kW
Dimension mm 1750×860×1500 2000×1000×1670 2250×1330×1650 2400×1500×1850
Weight 1150kg 1450 kg 1800 kg 2100 kg

MUD HOPPER / JET MUD MIXER

Used for changing the drilling fluid’s density, viscosity by adding chemical additives, to adjust the drilling
fluid’s proportion;
Better performance when to match with shear pump;
Mud Hopper works with venture tube and original jet nozzle;
Jet Mud Mixer, consisting of mud hopper, centrifugal sand pump, manifolds, and butterfly valve, flexible
couplings and base. Single or double jet mud mixer is both available.
Technical parameter
Model Working Pressure Inlet Size Outlet Size Weight Hopper Diameter
MH-6X6 6 inch 6 inch 174kg 750 x 750mm
MH-6X5 0.25~0.4Mpa 6 inch 5 inch 174kg 750 x 750mm
MH-4X4 4 inch 4 inch 174kg 500 x 500mm
23 / 37
Technical Parameters
Model SLH150-50 SLH150-45 SLH150-35 SLH100-25 SLH100-25
Treating 230-375m3/h 140-230m3/h 120-210 m3/h 70-110 m3/h 30-60m3/h
Capacity 1012-1650GPM 616-1012GPM 528-924GPM 308-484GPM 132-264GPM
Matching BT-SB8x6x14- BT-SB6 x5x11- BT-SB6 x5x14- BT-SB5 x4x14- BT-SB4 x3x13-
Pump 55kw 45kw 30kw 22kw 15kw
Pressure 0.25~0.40Mpa
Feed Inlet 6〃(150mm) 6〃(150mm) 6〃(150mm) 4〃(100mm) 4〃(100mm)
Nozzer
50mm 45mm 35mm 25mm 25mm
Caliber
Inlet Dia. 6〃 6〃 6〃 5〃 4〃
Outlet Dia. 5〃 5〃 5〃 4〃 4〃
Hopper Size 600x600mm 600x600mm 600x600mm 500x500mm 500x500mm
Mixing
100kg/min 80kg/min ≤80kg/min ≤60kg/min ≤40kg/min
Speed
Mud
≤2.8g/cm3 ≤2.4g/cm3 ≤2.0g/cm3 ≤2.0g/cm3 ≤1.5g/cm3
Density
Mud
≤120s ≤120s ≤120s ≤80s ≤60s
Viscosity
Dimension
2200x1760x1250 2200x1760x1100 2200x1760x1100 1800x1720x890 1800x1720x890
mm
weight 1600kg 1350kg 1280kg 950kg 900kg

24 / 37
MUD AGITATOR
Driven by explosion-proof motor directly to connect with gearbox by rigid coupling;
Worm turbine structure reducer adopted for those driven motor 7.5kw above, helical-bevel design or
worm design gearbox is both available;
Horizontal and vertical for optional;
Four blades of impeller welded, and single or double impeller can be designed as per the request of
tank depth, the shaft stabilizer for choice when tank depth over 1.8m;
Compact construction, light weight, balanced transmission, small footprint, low noise, high efficiency

Technical Parameters
Model JBQ3.0 JBQ5.5 JBQ7.5 JBQ11 JBQ15 JBQ18.5 JBQ22
Motor Power 3kw 5.5kw 7.5kw 11kw 15kw 18.5kw 22kw
Impeller Speed 60rpm（@50HZ）/72rpm（@60HZ）
Shaft Length To design as per the tank internal height
Single Impeller
650 850 950 1050 1100 1100 1100
[Link]
Double Impeller Up 800 Up 850 Up 900 Up 900 Up 900
N/A
Dia. mm Down 800 Down 850 Down 900 Down 900 Down 900
Electric Specs 380V/50HZ or 460V/60 or Customized
EX Standard Ex dⅡBT4
Dimension mm 717x560 910×600 1080×650 1250×720 1270×1000 1270×1000
x472 ×560 ×630 ×690 ×727 ×727
Weight 154 kg 252 kg 255 kg 340 kg 430 kg 746 kg 820 kg
Remarks: Shaft weight is not include in the above weight, 15 kg/m for agitator shaft.

25 / 37
MUD GUN
To clean the tank wall and corner to prevent the solids sediment in the mud tank;
To work combining with mud agitator and centrifugal sand pump or shear pump together to finish the
agitation process;
2” and 3” inlet pipe for optional, it depends on the tank size;
Low pressure, middle pressure, high pressure are classified for optional;
Good sealing and wear-resisting replaceable nozzle, regular cleaning the
mud gun nozzle to prevent blockage;
Simple structure design, easy operation and better treatment efficiency.

Technical Parameters
Model NJQ50-3 NJQ30-3R NJQ80-3 NJQ80-3R
Working Pressure ≤6.4 Mpa
Rotation Angel 120°or 360°
Nozzle no. 3
Length 1500mm or customized
Diameter DN50 DN80
Dimension 1900 x 460 x360 mm 1900 x 460 x360 mm
Weight 45 kgs 50 kgs

MUD GAS SEPARATOR

To remove the big bubbles ≥Φ3mm from the drilling fluid or H2S gas;

Positioned before shale shaker to adjust the drilling fluid’s gravity and viscosity ratios;

Usually, to combine work with Flare Ignition System to ensure the drilling security and smoothly.

Technical Parameters
Model ZYQ800 ZYQ1000 ZYQ1200
Treating capacity 200~260m3/h 240~300m3/h 280~360m3/h
Main body 800mm 1000mm 1200mm
Tank wall thickness 10mm 10mm 12mm
Inlet 5" 5" 5"
Outlet 8" 8" 10"
Gas Vent-pipe 8" 8" 8"
Dimension 1600×1600×5720mm 2000×2000×5920mm 2200×2200×6634mm
Weight 1600kg 2100kg 3200kg

26 / 37
FLARE IGNITION SYSTEM
To burn out the harmful gas collected from the mud gas separator in the oil& gas drilling field;
To ensure the drilling security and protect the environment;
Electrical power charge or solar energy charge for optional;
The power for the electric can be direct industry power or battery for remote area application
Remote control by PLC is available.

Technical Parameters
Model DH20/3
Burner(Torch) Nominal Diameter DN200
Burner Height 3m
Charging Power 100V-240V~50/60hz
Ignition voltage 16KV
Ignition frequency 100~1000 times/minute
Dimension 1710×600×3200mm
Weight 400kg

27 / 37
SHEAR PUMP

Horizontal centrifugal pump structure, belt driven for high speed work;

Unique combined mechanical seal and packing seals to ensure no leakage;

Thicker casings than the regular pumps to provide more strength and lifespan;

Stainless steel turbine and shear plate to ensure the continuous shear force;

To improve bentonite particles hydration degree, reduces the bentonite clay need by 30%;

For polymer or clay rapidly hydration provide high shear force.

Technical Parameters
Model JQB6x5-55kw JQB6x5-45kw
Flow 120m3/h 528GPM 100m3/h 440GPM
Lift 45m 35m
Power 55kw 45kw
Electric Specs 380V/50HZ or 460V/60HZ or Customized
EX Standard ExdIIBt4 / IEC EX/ ATEX
Dimension 1050×1000×1280mm 1050×1000×1250mm
Weight 980kg 800kg

MUD TANK

Mud Tank, Water Tank and Oil Tank are available;

Square tank and Cone-shaped tank for optional;
Tank body made of the welding corrugated steel plate
with two layers rust-proof coating for inner wall and
three layer for outer wall;
Brand paint we adopted, marine corrosion-resistant
zinc rich epoxy coating and paining;
Oilfield structure design is horizontal three runner
skid-mounted;
Tank designed with the collapsible ladders, foot
board, two-sided guard rail and water cleaning
pipeline, the optional shanty for sun protection;
High quality raw material but good price.
Mud tanks includes Mud Storage Tank, Mud Mixing
Tank, Mud Trip Tank, Mud Recycling Tank
28 / 37
MUD SYSTEM
Oil & Gas Drilling-Solid control System
Complete the solid control equipment with mud tank mounted on the steel base for drilling rigs up to
3000HP;
HDD &CBM Drilling-Mud recycling system
Also used for waterwell, mining and geothermal well drilling, compact structure design, 200-1500gpm,
mounted on skid, trailer for easy transportation.
Bored Pile & TBM drilling- Mud Cleaning System
Also used for mining slurry separation system and dredging slurry separation system
High efficiency and reasonable design, compact structure, convenient transport, easy operation, to
meet the customized request.

29 / 37
OILFIELD SHAKER REPLACEMENT SCREENS

Screens are highly consumable so extending screen API Screen Size Reference List
life can be significant in reducing costs and improving D100 separation (Micron) API Screen Number
overall profitability, and the good quality screens will
>7801.0 TO 925.0 API 20
optimize solids control efficiency and cut costs. We are
> 550.0 TO 655.0 API 30
aimed at this and do this.
For any qualified screens, consisting of carbon steel > 390.0 TO 462.0 API 40

frame, metal grid, coarse backing layer wire cloth, fine > 275.0 TO 390.0 API 50
middle wire cloth and ultrafine top layer wire cloth by > 231.0 TO 275.0 API 60
excellent bonding technique.
> 196.0 TO 231.0 API 70
Composite frame screen, Steel frame screen, pyramid
> 165.0 TO 196.0 API 80
screen, hook strip flat screen and hook strip soft screen
-4 styles for optional; > 137.5 TO 165.0 API 100

Composite screens are advanced new design, to bring > 116.5 TO 137.5 API 120
the technology from US Brand Company, it creates a > 98.0 TO 116.5 API 140
new period of screens, now widely used in the oilfield
> 82.5 TO 98.0 API 170
shakes.
> 69.0 TO 82.0 API 200
Consist generally of a glass fiber filled, polyurethane
frame with high strength steel internal reinforcing > 58.0 TO 69.0 API 230

structure; one to three layers of stainless steel wire > 49.0 TO 58.0 API 270

cloth are melted directly into the surface of > 41.5 TO 49.0 API 325
polyurethane frame.
> 35.0 TO 41.5 API 400
Feature of reduced screen weight, increased usable
area, higher throughput capacity, significantly longer operation life, flat panel, exclusive plug repair
system, lower screen replacement cost, fast and easy to repair, improved solids control efficiency.
Suitable for Mi-Swaco Mongoose PT, MEERKAT PT, BEM, NOV Brandt Cobra, VSM300

30 / 37
Other styles of popular brand compatible replacement screens available, such as MI-Swaco, NOV Brandt cobra
and VSM300, FLC500 &2000 series, KEMTRON, etc;

Steel frame screens

Feature of light weight, economic price

PWP & PMD shaker screens

Feature light weight, lower price cost, and widely application, suitable model such as FLC500,FLC 2000, Mi-
Swaco ALS

HYDROCYCLONE

A wide variety of hydro-cyclones for desilters and desanders as replacements for major O.E.M. brands
in the 4”, 5”, 6”, 10” & 12” sizes
Made of Polyurethane or abrasion-resistant alloy, Clamp design
The separation of solids is dependent upon feed particle size, fluid density &viscosity, fluid feed pressure
and cone apex size;
Enough feeding pressure is necessary (at least 23m pressure head), less bend and T pipeline to ensure
[Link] loss.

31 / 37
Technical Parameters
Model 12 inch 10 inch 5 inch 4 inch

Normal Diameter 305mm 254mm 125mm 102mm

Material Cast Polyurethane Cast Polyurethane Cast Polyurethane Cast Polyurethane

Capacity ＞120m3/h 90~120m3/h 25~30m3/h 10~20m3/h

Cut Point D50 60-80 μm 50-70 μm 15-25μm 15-20μm

Remark All hydrocyclones require 75ft(22.9m) of head, D50 is dependent on the feeding
particle size.

BUTTERFLY VALVE

DEMCO NE-C style Available in sizes 2”-12”, wafer and lug design
Bi-directional sealing, integral flange seal, ASME/ANSI #150 flange, 10-position locking handle
General style with flange locating holes 2”-64” Wafer and Lug type available, Handle and wheel
operation
Body: CI/DI
Seat:
EPDM/NBR/PTFE/VITON
Disc: DI/CF8/CF8M/Al-bronze
Stem: SS416/SS304/SS316
Pin: SS316/SS416
Bushing: Polymer
Pressure 200psi

32 / 37
HAMMER SEAL UNION

Hammerseal Unions / Tank Unions to join mud tanks without the work associated with flanged
connections quickly; Even if the tanks are not aligned perfectly, still made up tight for a non-leak seal;
Sealing fluid pressures up to 150 psi against the outside diameter of the connecting pipe. Including O-
ring, available sizes in 4”, 6”

AIR O GRIP UNION & AIR TUBE

Seal-O-Grip Unions w/ Nitrile Pneumatic Tube air-inflatable connectors for low-pressure fluid or mud
suction and return lines;

Carbon steel body welds in place on mud tanks or manifold pipe, with NBR air tube for sealing even if
the connecting pipe is not perfectly aligned;

Available sizes in 4”-16”

33 / 37
HAMMER UNION & UNION SEAL KITS

Hammer unions are widely used in the fluid or mud manifolds, it was divided by union color code, to use
for lower-pressure, middle-pressure and high-pressure standard trim or H2S trim;
Available sizes in Fig100, Fig101, Fig200, Fig201, Fig206, Fig207, Fig211, Fig300, Fig400, Fig402,
Fig600, Fig602, Fig1002, Fig1003, Fig1502, Fig2002, Fig2202.
All the exported hammer unions are made of 35CrMo alloy steel
with quality seals.
Our hammer union seals ,O-ring, Lip seal rings, stainless steel
backed seal rings, and brass backed seal rings are available in
Buna, Viton, Buna with a brass ring, Viton with a stainless steel
ring, and Teflon. There are other sizes and materials available.

PART NO. DESCRIPTION

HOGHUO206B2 Fig. 206 Hammer Union O-Ring Seal, 2", Buna
HOGHUO206B3 Fig. 206 Hammer Union O-Ring Seal, 3", Buna
HOGHUSB2 Hammer Union Seal, 2", Buna
HOGHUSB3 Hammer Union Seal, 3", Buna
HOGHUSB4 Hammer Union Seal, 4", Buna
HOGHUSBB2 Hammer Union Seal, 2", Buna w/ Brass Ring
HOGHUSBB3 Hammer Union Seal, 3", Buna w/ Brass Ring
HOGHUSBB4 Hammer Union Seal, 4", Buna w/ Brass Ring
HOGHUSV2 Hammer Union Seal, 2", Viton
HOGHUSV3 Hammer Union Seal, 3", Viton
HOGHUSV4 Hammer Union Seal, 4", Viton
HOGHUSVSS2 Hammer Union Seal, 2", Viton w/ Stainless Steel Ring
HOGHUSVSS3 Hammer Union Seal, 3", Viton w/ Stainless Steel Ring
HOGHUSVSS4 Hammer Union Seal, 4", Viton w/ Stainless Steel Ring
HOGHUST2 Hammer Union Seal, 2", Teflon
HOGHUST3 Hammer Union Seal, 3", Teflon
HOGHUST4 Hammer Union Seal, 4", Teflon

EXPENSION JOINT /FLEXIABLE RUBBER COUPLINGS /DRESSER SLEEVE

We supply series of stainless steel expansion joint, rubber expansion joint, rubber couplings and dresser
sleeve, which is needed to be used in the drilling fluid & solid control system.

34 / 37
MUD GATE VALVES & PARTS

Interchangeable with OTECO 2” 3” 4” at 2000, 3000,

5000psi & DEMCO DM type 2” 3” 4” at 2000, 3000,
5000psi
Minor or major repair kits are available, including gate,
seat, bonnet seal, etc.

DRILLING RIG MATTINGS

BETTER offers series of rig mats and drilling rig

matting to safely and sensitively work on any location.
Our rig mats consist of H 6 x 15# steel beam welded
and inserted pine nailed by M39 long studs together
for superior. The average life of our drilling rig mats is
approximately 10 years, though some have remained
active for 15 – 20 years.
Regular specification
6” thick x 8’ wide x 10’ long
6” thick x 8’ wide x 15’ long
6” thick x 8’ wide x 20’ long
6” thick x 8’ wide x 25’ long
6” thick x 8’ wide x 30’ long
6” thick x 8’ wide x 40’ long
Custom Sizes Available

PRESSURE GUAGES

Interchangeable with Cameron D & F, OTECO model 6, 7, 8; for standard & salt water & H2S gas

35 / 37
BETTER DRILLING FLUID EQUIPMENT INDUSTRIAL LIMITED

China headquarter: No.80 Changxing Road, Ecnomic Development zone, dezhou, Shandong, China

Post code: 253000

Tel.: +86-534-5737702

Fax: +86-534-5737703

E-mail: sales@[Link]

BETTER DRILLING FLUID SOLUTION CO., LTD.

China headquarter: No.80 Changxing Road, Ecnomic Development zone, dezhou, Shandong, China

Post code: 253000

Tel.: +86-534-5737702

Fax: +86-534-5737703

E-mail: sales@[Link]

36 / 37