IL205AT, IL206AT, IL207AT, IL208AT
[Link]
Vishay Semiconductors
Optocoupler, Phototransistor Output,
With Base Connection in SOIC-8 Package
FEATURES
A 1 8 NC • High BVCEO, 70 V
K 2 7 B • Isolation test voltage, 4000 VRMS
NC 3 6 C • Industry standard SOIC-8A surface
mountable package
NC 4 5 E
• Compatible with dual wave, vapor phase and
IR reflow soldering
• Material categorization: for definitions of
compliance please see [Link]/doc?99912
LINKS TO ADDITIONAL RESOURCES
AGENCY APPROVALS
Related Design Tools Models • UL
Documents
• cUL
DESCRIPTION • DIN EN 60747-5-5 (VDE 0884), available with option 1
The IL205AT, IL206AT, IL207AT, IL208AT are optically • FIMKO
coupled pairs with a gallium arsenide infrared LED and a
silicon NPN phototransistor. Signal information, including a
DC level, can be transmitted by the device while maintaining
a high degree of electrical isolation between input and
output. This family comes in a standard SOIC-8 small outline
package for surface mounting which makes them ideally
suited for high density application with limited space. In
addition to eliminating through-hole requirements, this
package conforms to standards for surface mounted
devices.
A specified minimum and maximum CTR allows a narrow
tolerance in the electrical design of the adjacent circuits. The
high BVCEO of 70 V gives a higher safety margin compared
to the industry standard 30 V.
ORDERING INFORMATION
SOIC-8
I L 2 0 # A T
PART NUMBER TAPE AND
REEL 6.1 mm
CTR (%)
AGENCY CERTIFIED / PACKAGE
10 mA
UL, cUL, FIMKO 40 to 80 63 to 125 100 to 200 160 to 320
SOIC-8 IL205AT IL206AT IL207AT IL208AT
UL, cUL, FIMKO, VDE (option 1) 40 to 80 63 to 125 100 to 200 160 to 320
SOIC-8 - - IL207A-X001T -
Note
• Additional options may be possible, please contact sales office
Rev. 2.0, 13-Jul-2023 1 Document Number: 83614
For technical questions, contact: [Link]@[Link]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT [Link]/doc?91000
IL205AT, IL206AT, IL207AT, IL208AT
[Link]
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Peak reverse voltage VR 6 V
Forward continuous current IF 60 mA
Power dissipation Pdiss 90 mW
Derate linearly from 25 °C 1.2 mW/°C
OUTPUT
Collector emitter breakdown voltage BVCEO 70 V
Emitter collector breakdown voltage BVECO 7 V
Collector-base breakdown voltage BVCBO 70 V
ICMAX DC ICMAX DC 50 mA
ICMAX t < 1 ms ICMAX 100 mA
Power dissipation Pdiss 150 mW
Derate linearly from 25 °C 2 mW/°C
COUPLER
Isolation test voltage VISO 4000 VRMS
Total package dissipation (LED and detector) Ptot 240 mW
Derate linearly from 25 °C 3.3 mW/°C
Operating temperature Tamb -55 to +100 °C
Storage temperature Tstg -55 to +150 °C
Soldering time At 260 °C 10 s
Note
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = 10 mA VF - 1.3 1.5 V
Reverse current VR = 6 V IR - 0.1 100 μA
Capacitance VR = 0 V CO - 13 - pF
OUTPUT
Collector emitter breakdown voltage IC = 100 μA BVCEO 70 - V
Emitter collector breakdown voltage IE = 100 μA BVECO 7 10 - V
Collector emitter leakage current VCE = 10 V ICEO - 5 50 nA
COUPLER
Saturation voltage, collector emitter IC = 2 mA, IF = 10 mA VCEsat - - 0.4 V
Capacitance, input to output CIO - 0.5 - pF
Resistance, input to output RIO - 100 - GΩ
Note
• Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
Rev. 2.0, 13-Jul-2023 2 Document Number: 83614
For technical questions, contact: [Link]@[Link]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT [Link]/doc?91000
IL205AT, IL206AT, IL207AT, IL208AT
[Link]
Vishay Semiconductors
CURRENT TRANSFER RATIO
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IL205AT CTR 40 - 80 %
IL206AT CTR 63 - 125 %
IF = 10 mA, VCE = 5 V
IL207AT CTR 100 - 200 %
IL208AT CTR 100 - 320 %
Current transfer ratio
IL205AT CTR 13 25 - %
IL206AT CTR 22 40 - %
IF = 1 mA, VCE = 5 V
IL207AT CTR 34 60 - %
IL208AT CTR 56 95 - %
SWITCHING CHARACTERICTICS
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IC = 2 mA, RL = 100 Ω,
Switching time ton, toff - 3 - μs
VCC = 10 V
SAFETY AND INSULATION RATINGS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Climatic classification According to IEC 68 part 1 - 55 / 110 / 21 -
Pollution degree (DIN VDE 0109) - 2.0 -
Comparative tracking index CTI 175 - 399
DIN IEC 112 / VDE 0303 part 1,
VIOTM VIOTM 6000 - - V
group IIIa per DIN VDE 6110 175 399
VIORM VIORM 560 - - V
Resistance (input to output) RIO - 1012 - Ω
PSI - - 350 mW
ISI - - 150 mA
TSI - - 165 °C
Creepage distance 4.0 - - mm
Clearance distance 4.0 - - mm
Note
• As per IEC 60747-5-5, §[Link].1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.4 1.5
Normalized to:
1.3 VCE = 10 V
NCTRCE - Normalized CTRCE
VF - Forward Voltage (V)
IF = 10 mA
1.2 VCE = 5 V
TA = - 55 °C 1.0
1.1
1.0 TA = 25 °C
0.5
0.9 TA = 85 °C
0.8
VCE = 0.4 V
0.7 0
0.1 1 10 100 0.1 1 10 100
i205at_01 IF - Forward Current (mA) i205at_02 IF - LED Current (mA)
Fig. 1 - Forward Voltage vs. Forward Current Fig. 2 - Normalized Non-Saturated and Saturated CTRCE vs.
LED Current
Rev. 2.0, 13-Jul-2023 3 Document Number: 83614
For technical questions, contact: [Link]@[Link]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT [Link]/doc?91000
IL205AT, IL206AT, IL207AT, IL208AT
[Link]
Vishay Semiconductors
150 1000
ICE - Collector Emitter Current (mA)
ICB - Collector Base Current (µA)
VCB = 9.3 V
VCE = 10 V 100
100
10
50
1
VCE = 0.4 V
0 0.1
0.1 1 10 100 0.1 1 10 100
i205at_03 IF - LED Current (mA) i205at_06 IF - LED Current (mA)
Fig. 3 - Collector Emitter Current vs. LED Current Fig. 6 - Collector Emitter Photocurrent vs. LED Current
10 5
100
Normalized to:
ICEO - Collector Emitter (nA)
VCB = 9.3 V 10 4
IF = 1 mA
10 3
NICB - Normalized (ICB)
10
10 2
VCE = 10 V
10 1
1 10 0 Typical
10 -1
0.1 10 -2
0.1 1 10 100 - 20 0 20 40 60 80 100
i205at_04 IF - LED Current (mA) i205at_07 TA - Ambient Temperature (°C)
Fig. 4 - Normalized Collector-Base Photocurrent vs. LED Current Fig. 7 - Collector Emitter Photocurrent vs. LED Current
10 2.0
Normalized to: 25 °C Normalized to:
VCB = 9.3 V 50 °C IB = 20 µA
Normalized Saturated hFE
IF = 10 mA VCE = 10 V
1.5 25 °C
NICB - Normalized (ICB)
1
NhFE(sat)
1.0
0.1 VCE = 0.4 V
0.5
0.01 0.0
0.1 1 10 100 0.1 10 100 1000
i205at_05 IF - LED Current (mA) i205at_08 IB - Base Current (µA)
Fig. 5 - Normalized Collector-Base Photocurrent vs. LED Current Fig. 8 - Base Current vs. IF and hFE
Rev. 2.0, 13-Jul-2023 4 Document Number: 83614
For technical questions, contact: [Link]@[Link]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT [Link]/doc?91000
IL205AT, IL206AT, IL207AT, IL208AT
[Link]
Vishay Semiconductors
100
Input:
IF = 10 mA
50
Pulse width = 100 mS
Switching Time (µs)
Duty Cycle = 50 % FF
TO
10
5
TON
1.0
10K 50K 100K 500K 1M
i205at_09 Base Emitter Resistance, RBE (Ω)
Fig. 9 - Typical Switching Characteristics vs.
Base Resistance (Saturated Operation)
Input
VCC = 5 V ton toff
tpdon tpdoff
Input
RL tr tr
td
Output ts
10 % 10 %
VOUT
50 % 50 %
90 % 90 %
i205at_11
Fig. 10 - Switching Test Circuit
Rev. 2.0, 13-Jul-2023 5 Document Number: 83614
For technical questions, contact: [Link]@[Link]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT [Link]/doc?91000
IL205AT, IL206AT, IL207AT, IL208AT
[Link]
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
3.05 ± 0.13
R 0.13
CL 1.27 0.36
6.10 3.91 ± 0.13
0.91
4.32 1.14
0.41
6.6
Pin one ID
7°
4.88 ± 0.13
40°
1.49 ± 0.13
0.38 ± 0.05
ISO method A
0.20 3.18 ± 0.13
5° max.
0.1
0.2
1.27 typ. R 0.25 max. Lead coplanarity
± 0.04 max.
0.51 ± 0.10
0.53
2 places
i178003
PACKAGE MARKING (example)
206A
V XXXX 68
Fig. 11 - Example of IL206AT
Notes
• XXXX = LMC (lot marking code)
• Tape and reel suffix (T) is not part of the package marking
Rev. 2.0, 13-Jul-2023 6 Document Number: 83614
For technical questions, contact: [Link]@[Link]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT [Link]/doc?91000
Legal Disclaimer Notice
[Link]
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Vishay products are not designed for use in life-saving or life-sustaining applications or any application in which the failure of
the Vishay product could result in personal injury or death unless specifically qualified in writing by Vishay. Customers using or
selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized
Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2025 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2025 1 Document Number: 91000
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT [Link]/doc?91000
