Scribd
Upload
37 views2 pages

Festo DGPL-40 Linear Drive Specifications

The DGPL-40 linear drive features a stroke range of 10 mm to 3000 mm and a piston diameter of 40 mm, with adjustable pneumatic cushioning and various mounting options. It operates under a pressure range of 0.15 MPa to 0.8 MPa and is suitable for use in explosion protection zones 1 and 2, complying with ATEX and UKCA standards. The drive is constructed from anodized aluminum and is rated IP65 for protection against dust and water.

Uploaded by

Abdelrhman Elsayed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views2 pages

Festo DGPL-40 Linear Drive Specifications

The DGPL-40 linear drive features a stroke range of 10 mm to 3000 mm and a piston diameter of 40 mm, with adjustable pneumatic cushioning and various mounting options. It operates under a pressure range of 0.15 MPa to 0.8 MPa and is suitable for use in explosion protection zones 1 and 2, complying with ATEX and UKCA standards. The drive is constructed from anodized aluminum and is rated IP65 for protection against dust and water.

Uploaded by

Abdelrhman Elsayed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Linear drive

DGPL-40- -
Part number: 175136

n
io
at
nt
se
re

General operating condition


ep
yr
ar
pl
em
Ex

Data sheet
Overall data sheet – Individual values depend upon your configuration.

Feature Value
Stroke 10 mm ... 3000 mm
Piston diameter 40 mm
Cushioning Pneumatic cushioning, adjustable at both ends
Shock absorber, hard characteristic curve
Mounting position optional
Guide Plain-bearing guide
Basic guide
Recirculating ball bearing guide
Heavy-duty guide
Coupling design Positive-locking (slot)
Position detection Via proximity switch
Via attached displacement encoder
With integrated displacement encoder
Variants Supply port at both ends
Protected version
Standard slide
Extended slide
Clamping unit at rear
Clamping unit, underneath
Clamping unit at front
Operating pressure 0.15 MPa ... 0.8 MPa
Operating pressure 1.5 bar ... 8 bar
Mode of operation Double-acting
CE mark (see declaration of conformity) To EU Explosion Protection Directive (ATEX)
UKCA marking (see declaration of conformity) To UK EX instructions
Explosion protection Zone 1 (ATEX)
Zone 2 (ATEX)
ATEX category gas II 2G
Explosion ignition protection type for gas Ex h IIC T4 Gb X
Explosion ambient temperature -10 °C <= Ta <= +60 °C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Corrosion resistance class CRC 0 - No corrosion stress
1 - Low corrosion stress
2 - Moderate corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Degree of protection IP65
Ambient temperature -10 °C ... 60 °C

23/03/2025 - Subject to change - Festo SE & Co. KG 1/2


Feature Value
Cushioning length 30 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 754 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 754 N
alternative connections See product drawing
Pneumatic connection G1/4
Material cover Die-cast aluminium
Coated
Material seals NBR
TPE-U(PU)
Material housing Aluminium
Anodised

23/03/2025 - Subject to change - Festo SE & Co. KG 2/2

You might also like