CUVAN ®
CUVAN® 826
TECHNICAL DATA
Corrosion Inhibitor is an ashless, oil-soluble corrosion inhibitor and
826 metal deactivator for non-ferrous metals. CUVAN 826 has the ability to protect
copper against corrosive sulfur at low treat rates and moderate temperatures.
CHEMICAL COMPOSITION
2,5-dimercapto-1,3,4-thiadiazole derivative
Corrosion Inhibitor
and
TYPICAL PROPERTIES
Metal Deactivator
Appearance Clear amber liquid
Density at 15.6 °C, Mg/m 3
1.04
Viscosity at 100°C, mm /s 2
3.3
Flash Point, PMCC, °C 192
Nitrogen, % 4.8
Sulfur, % 32.9
* The analytical data listed above are not specifications
APPLICATIONS
• Fuel • Turbine Oil • Compressor Oil • Hydraulic Oil
• Engine Oil • Gear Oil • Grease • Metalworking
RECOMMENDED TREAT RATES
Industrial Oil Engine Oil Grease
Treat Rate, % 0.1 – 0.5
ADVANTAGES
• Robust ashless corrosion inhibitor and metal deactivator
• Good solubility in mineral oils, PAO, esters and other synthetic base stocks
• Effective for copper and other nonferrous metals
• Effective in suppress the corrosive action of hydrogen sulfide
• Effective in a broad range of applications range from fuel, lubricant oil, grease
and metal working fluid
SOLUBILITY
Soluble in petroleum and synthetic oils.
STANDARD PACKAGING
450 lb drum
*Please see user advisory on next page.
STORAGE AND HANDLING
Storage
Store in accordance with local regulations. Store in original container protected
from direct sunlight in a dry, cool and well-ventilated area, away from incompatible
materials (see Section 10 of SDS) and food and drink. Keep container tightly closed
and sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabeled containers.
Use appropriate containment to avoid environmental contamination.
Handling
Put on appropriate personal protective equipment (see Section 8). Persons with a
history of skin sensitization problems should not be employed in any process in which
this product is used. Do not get in eyes or on skin or clothing. Do not ingest. Avoid
breathing vapor or mist. Use only with adequate ventilation. Wear appropriate
respirator when ventilation is inadequate. Keep in the original container or an
approved alternative made from a compatible material, kept tightly closed when not
in use. Empty containers retain product residue and can be hazardous. Do not reuse
container. This product has a tendency upon standing to haze. If this should happen,
the product should be heated at 40 ºC (104 ºF) to 50 ºC (122 ºF) to re-homogenize.
REGISTRATION
Please refer for section 15 of SDS for regulatory information.
CONTACT INFORMATION
For samples, product information and/or technical service please contact Vanderbilt
Chemicals, LLC or the Vanderbilt representative in your area:
Vanderbilt Chemicals, LLC
30 Winfield Street, P.O. Box 5150
Norwalk, CT 06856-5150
P: (203) 853-1400
F: (203) 853-1452
[Link]
Vanderbilt (Beijing) Trading, Ltd
Room 220A, Tower A
No. 8 Hengfeng Road
Science Town, Fengtai District
Beijing 100070 P. R. China
P: 011- 86 10 56541176
F: 011- 86 10 56541175
Vanderbilt Worldwide Ltd
12 Park House Alvaston Business Park, Middlewich Road
Nantwich, Cheshire, CW5 6PF
United Kingdom
[Link]
Before using, read, understand and comply with the information and precautions in the Safety Data Sheets, label and other product literature. The information presented
herein, while not guaranteed, was prepared by technical personnel and, to the best of our knowledge and belief, is true and accurate as of the date hereof. No warranty,
representation or guarantee, express or implied, is made regarding accuracy, performance, stability, reliability or use. This information is not intended to be all-inclusive,
because the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. The user is responsible
for determining the suitability of any material for a specific purpose and for adopting such safety precautions as may be required Vanderbilt Chemicals, LLC does not warrant the
results to be obtained in using any material, and disclaims all liability with respect to the use, handling or further processing of any such material. No suggestion for use is intended
as, and nothing herein shall be construed as, a recommendation to infringe any existing patent, trademark or copyright or to violate any federal, state or local law or regulation.
