Brilliance CT TM
6/10/16-slice, 16 Power, 40-channel, 64-channel, Combined Rack
Console, Big Bore Configurations, and MX8000 Dual v. EXP
Schematics Manual, Volume 1
4535 670 87001
Revision F
This document and the information contained in it is proprietary and confidential information of Philips Medical Systems (“Philips”) and may not be
reproduced, copied in whole or in part, adapted, modified, disclosed to others, or disseminated without the prior written permission of the Philips Legal
Department. Use of this document and the information contained in it is strictly reserved for current Philips personnel and Philips customers who have a
current and valid license from Philips for use by the customer’s designated in-house service employee on equipment located at the customer’s designated site.
Use of this document by unauthorized persons is strictly prohibited. Report violation of these requirements to the Philips Legal Department. This document
must be returned to Philips when the user is no longer licensed and in any event upon Philips’ first written request.
Philips Medical Systems © 2005
Philips Medical Systems
© 2005 KONINKLIJKE PHILIPS ELECTRONICS N. V. ALL RIGHTS RESERVED.
Warranty Disclaimer
PHILIPS PROVIDES THIS DOCUMENT WITHOUT WARRANTY OF ANY KIND, IMPLIED OR EXPRESSED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Limitation of Liability
PHILIPS HAS TAKEN CARE TO ENSURE THE ACCURACY OF THIS DOCUMENT. HOWEVER, PHILIPS ASSUMES
NO LIABILITY FOR ERRORS OR OMISSIONS AND RESERVES THE RIGHT TO MAKE CHANGES WITHOUT
FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. PHILIPS
MAY MAKE IMPROVEMENTS OR CHANGES IN THE PRODUCT(S) OR PROGRAM(S) DESCRIBED IN THIS
DOCUMENT AT ANY TIME.
Symbol Descriptions
Attention symbol Radiation warning symbol
Laser warning symbol Biohazard warning symbol
Magnetism warning symbol Projectile warning symbol
Electrical warning symbol Do not touch
Revision History
ECO # Revision Date Comments
-1 May 31, 2004 Preliminary Issue with Dual EXP schematics and manual changed to a 2 volume document.
-2 July 31, 2004 Manual part number pending.
-3 August 15, 2004 Added GMP and GM Power Schematics, final review copy.
A August 31, 2004 Revision A release.
B October 30, 2004 Updated cover for PPCV configuration, added Brilliance 40 rotor / stator fiber optic layout 4535 671 11031.
Updated cover for CRC configuration, added ACCU schematic 4535 670 69951, slip ring transceiver interface 4535 670 97981, and
C February 28, 2005
CRC cables layout 4550 145 03981, updated other drawing revisions.
Converted front matter from Interleaf to FrameMaker, deleted PPCV configuration from front cover, added Accolade (Big Bore) cable
D June 10, 2005 interconnect block diagram 4535 671 02001, 7100/Onco Macquistor schematic 4535 670 26121, and Resolver to Digital converter
schematic 4535 671 06711.
E June 30, 2005 Updated front cover for 64-channel configuration.
Updated numerous drawings to latest revision levels, added S/D Rear Controls Drawing 4535 671 07191 to volume 1, added
F December 1, 2005 Common DMP drawing 4550-145-04092 and CT Box Assy and Wiring Diagram 4535 670 27191 to volume 2, moved common patient
support (couch) and positioning encoder drawings to volume 2.
This document was prepared by the CT PMG Haifa Service Innovation Department.
For any additions, corrections, or suggestions, contact:
CT PMG Haifa Customer Support Department
Email: _1HFA_Support_e2@[Link]
Safety Information
To the User of This Manual
The user of this manual is directed to read and carefully review the instructions, warnings and cautions contained herein prior to beginning installation or service activities. While you may have previously
installed or serviced equipment similar to that described in this manual, changes in design, manufacture or procedure may have occurred which significantly affect the present installation or service.
Installation and Environment
Except for installations requiring certification by the manufacturer per federal standards, see that a radiation protection survey is made by a qualified expert in accordance with NCRP 102, section 7, as
revised or replaced in the future. Perform a survey after every change in equipment, workload, or operating conditions which might significantly increase the probability of persons receiving more than
the maximum permissible dose equivalent.
Diagnostic Imaging Systems - Mechanical-electrical Warning
All of the moveable assemblies and parts of this equipment should be operated with care and routinely inspected in accordance with the manufacturer’s recommendations contained in the equipment
manuals.
Only properly trained and qualified personnel should be permitted access to any internal parts. Live electrical terminals are deadly; be sure line disconnects are opened and other appropriate precautions
are taken before opening access doors, removing enclosure panels, or attaching accessories.
Do not under any circumstances, remove the flexible high tension cables from the x-ray tube housing or high tension generator and/or the access covers from the generator until the main and auxiliary
power supplies have been disconnected. Failure to comply with the above may result in serious or fatal bodily injuries to the operator or those in the area.
Electrical-grounding Instructions
The equipment must be grounded to an earth ground by a separate conductor. The neutral side of the line is not to be considered the earth ground. On equipment provided with a line cord, the
equipment must be connected to properly grounded, three-pin receptacle. Do not use a three-to-two pin adapter.
Diagnostic Imaging Systems - Radiation Warning
X-ray and Gamma-rays are dangerous to both operator and others in the vicinity unless established safe exposure procedures are strictly observed.
The useful and scattered beams can produce serious or fatal bodily injuries to any persons in the surrounding area if used by an unskilled operator. Adequate precautions must always be taken to avoid
exposure to the useful beam, as well as to leakage radiation from within the source housing or to scattered radiation resulting from the passage of radiation through matter.
Those authorized to operate, participate in or supervise the operation of the equipment must be thoroughly familiar and comply completely with the current established safe exposure factors and
procedures described in publications, such as: Subchapter J of Title 21 of the Code of Federal Regulations, "Diagnostic X-ray Systems and Their Major Components", and the national council on radiation
protection (NCRP) no. 102, "Medical X-ray And Gamma-ray Protection For Energies Up To 10 Mev-equipment Design and Use", as revised or replaced in the future.
Those responsible for planning of x-ray and gamma-ray equipment installations must be thoroughly familiar and comply completely with NCRP no. 49, "Structural Shielding Design and Evaluation For
Medical Of X-rays and Gamma-rays of Energies Up to 10 Mev", as revised and replaced in the future. Failure to observe these warnings may cause serious or fatal bodily injuries to the operator or those
in the area.
Add additional safety information as needed
Only qualified and system trained Philips service staff is allowed to perform service (installation, maintenance, quality assurance) on the Brilliance CT systems. Make sure that the latest version of the
TM
service instructions are available. Read the corresponding instructions carefully prior to working on the system. For your own safety and for more detailed safety information, refer only to the current
version of the documents.
Use only specified tools and auxiliary materials. After finishing any service activity, ensure that all covers of the Brilliance CT, including the mylar gasket, are closed
TM
Precautionary Measures Regarding Electrical Voltage
Before you start the procedure outlined in this manual, make sure that you read and understand the warnings listed below.
WARNING PRIOR TO ANY SERVICE AND MAINTENANCE ACTIVITIES INSIDE COMPONENTS:
SWITCH OFF THE SYSTEM AT THE MAIN POWER SUPPLY, (USING THE ON-SITE ON-OFF SWITCH) AND THE INTERNAL/EXTERNAL
UNINTERRUPTIBLE POWER SUPPLY (UPS).
MAKE SURE THAT NO OTHER PERSON CAN SWITCH ON POWER OR SWITCH OFF THE SECURITY MEASURES, WHEN INSTALLATION,
MAINTENANCE OR SERVICE WORK ON THE SYSTEM IS PERFORMED.
WARNING IN ADDITION TO THE WARNINGS LISTED ABOVE, MAKE SURE TO FOLLOW ALL SAFETY GUIDELINES AS DESCRIBED IN THE SAFETY
CHAPTER OF THIS MANUAL. FAILURE TO DO SO CAN RESULT IN SEVERE PERSONAL INJURY.
CAUTION Always use an ESD protection wrist strap when servicing any component in the system.
TABLE OF CONTENTS - VOLUME 1
COMMON SYSTEM
T61-3008 revision A Item E-Stop Loop
BRILLIANCE SYSTEM
N/A Stargate 164 Hardware Block Diagram
4535 670 18351 revision C Stargate 164 System Block Diagram
4535 670 34561 revision B Stargate 164 Stationary Power
4535 671 02001 revision C Accolade (Big Bore) Cable Interconnect Block Diagram
DUAL EXP SYSTEM
T61-3156 revision A Stargate L System Block Diagram
T61-3044 revision A Slip Ring Communications Interface
T61B-1742 revision A Signal Distribution Board
T61-3198 revision D Stationary Power
COMMON GANTRY
T61-2383 revision C Main Drive Processor
T61-3039 revision C Dual Tilt Drive Interface
T61-2170 revision D Fuse Relay Control
T61B-1715 revision B Common Processor Module (CPM)
N/A Slipring Pinout Diagram
T61-2316 revision B Gantry Microphone
16 POWER GANTRY
4535 670 47591 revision A SG 164 BUS
4535 670 47581 revision A SG 164 CAN BUS
4535 670 69951 revision C AC Control Unit (ACCU)
4535 670 20521 revision K ACCU Switch Assembly
4535 670 19581 revision H Fuse Contactor Softstart Assembly
4535 670 13381 revision A Resolver to Digital Converter
4535 670 09291 revision E Gantry Host (GHost)
4535 670 05941 revision B Rotating Host (RHost)
4535 670 17361 revision B Gantry Switch Panels L & R
4535 670 17401 revision C Gantry Display
4535 670 11181 revision A Gantry Intercom
4535 670 17411 revision A Gantry Display / Switch Controller Board
4535 670 10291 revision C Gantry Motion Power Board
4535 670 10361 revision B Gantry Motion Processor Board
4535 671 07191 revision A S/D Rear Controls
4535 670 97981 revision A Slip Ring Transceiver Interface
40-CHANNEL GANTRY
4535 671 11031 revision A Brilliance 40 Rotor / Stator Fiber Optic Layout
BIG BORE GANTRY
4535 671 06711 revision A Resolver to Digital Converter Schematic
DUAL EXP GANTRY
T61-2273 revision C Resolver to Digital Converter
T61B-1714 revision C Reference Converter Box (A-Plane Collimator & DMS Interface)
T61B-1745 revision F Gantry Host (GHost)
T61B-1750 revision G Rotating Host (RHost)
T61B-1747 revision D AC Control Unit Board
T61B-1737 revision A Gantry Switch Panels
T61B-1738 revision C Gantry Display
T61B-1739 revision A Gantry Intercom
HIGH VOLTAGE GENERATOR (SPELLMAN) BLOCK DIAGRAMS (COMMON)
340310-001 revision A High Voltage Generator (Block Diagram)
440856-001 revision B1 AC Module (Block Diagram)
440910-001 revision A CPM (Block Diagram)
440910-002 revision A APM (Block Diagram)
440918-001 revision A Grid Modulator (Block Diagram)
440909-002 revision A HVM Anode (Block Diagram)
440909-001 revision A HVM Cathode (Block Diagram)
440848-001 revision A Inverter Module (Block Diagram)
HIGH VOLTAGE GENERATOR (SPELLMAN) SCHEMATIC DIAGRAMS (COMMON)
440846-001 revision B2 System Control
340309-002 revision A Anode High Voltage Module (HVM)
340309-001 revision A Cathode High Voltage Module (HVM)
440752-001 revision B Inverter
440847-001 revision B AC Board
440851-001 revision C Filament Feedback
16 POWER HIGH VOLTAGE GENERATOR (SPELLMAN) SCHEMATIC DIAGRAM
440949-001 revision A High Speed Starter, 3 - Phase
DUAL EXP HIGH VOLTAGE GENERATOR (SPELLMAN) SCHEMATIC DIAGRAM
440869-001 High Speed Starter (HSS)
Brilliance CT TM
6/10/16-slice, 16 Power, 40-channel, 64-channel, Combined Rack
Console, Big Bore Configurations, and MX8000 Dual v. EXP
Schematics Manual, Volume 2
4535 670 87001
Revision F
This document and the information contained in it is proprietary and confidential information of Philips Medical Systems (“Philips”) and may not be
reproduced, copied in whole or in part, adapted, modified, disclosed to others, or disseminated without the prior written permission of the Philips Legal
Department. Use of this document and the information contained in it is strictly reserved for current Philips personnel and Philips customers who have a
current and valid license from Philips for use by the customer’s designated in-house service employee on equipment located at the customer’s designated site.
Use of this document by unauthorized persons is strictly prohibited. Report violation of these requirements to the Philips Legal Department. This document
must be returned to Philips when the user is no longer licensed and in any event upon Philips’ first written request.
Philips Medical Systems © 2005
Philips Medical Systems
© 2005 KONINKLIJKE PHILIPS ELECTRONICS N. V. ALL RIGHTS RESERVED.
Warranty Disclaimer
PHILIPS PROVIDES THIS DOCUMENT WITHOUT WARRANTY OF ANY KIND, IMPLIED OR EXPRESSED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Limitation of Liability
PHILIPS HAS TAKEN CARE TO ENSURE THE ACCURACY OF THIS DOCUMENT. HOWEVER, PHILIPS ASSUMES
NO LIABILITY FOR ERRORS OR OMISSIONS AND RESERVES THE RIGHT TO MAKE CHANGES WITHOUT
FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. PHILIPS
MAY MAKE IMPROVEMENTS OR CHANGES IN THE PRODUCT(S) OR PROGRAM(S) DESCRIBED IN THIS
DOCUMENT AT ANY TIME.
Symbol Descriptions
Attention symbol Radiation warning symbol
Laser warning symbol Biohazard warning symbol
Magnetism warning symbol Projectile warning symbol
Electrical warning symbol Do not touch
Revision History
ECO # Revision Date Comments
-1 May 31, 2004 Preliminary Issue with Dual EXP schematics and manual changed to a 2 volume document.
-2 July 31, 2004 Manual part number pending.
-3 August 15, 2004 Added GMP and GM Power Schematics, final review copy.
A August 31, 2004 Revision A release.
B October 30, 2004 Updated cover for PPCV configuration, added Brilliance 40 rotor / stator fiber optic layout 4535 671 11031.
Updated cover for CRC configuration, added ACCU schematic 4535 670 69951, slip ring transceiver interface 4535 670 97981, and
C February 28, 2005
CRC cables layout 4550 145 03981, updated other drawing revisions.
Converted front matter from Interleaf to FrameMaker, deleted PPCV configuration from front cover, added Accolade (Big Bore) cable
D June 10, 2005 interconnect block diagram 4535 671 02001, 7100/Onco Macquistor schematic 4535 670 26121, and Resolver to Digital converter
schematic 4535 671 06711.
E June 30, 2005 Updated front cover for 64-channel configuration.
Updated numerous drawings to latest revision levels, added S/D Rear Controls Drawing 4535 671 07191 to volume 1, added
F December 1, 2005 Common DMP drawing 4550-145-04092 and CT Box Assy and Wiring Diagram 4535 670 27191 to volume 2, moved common patient
support (couch) and positioning encoder drawings to volume 2.
This document was prepared by the CT PMG Haifa Service Innovation Department.
For any additions, corrections, or suggestions, contact:
CT PMG Haifa Customer Support Department
Email: _1HFA_Support_e2@[Link]
Safety Information
To the User of This Manual
The user of this manual is directed to read and carefully review the instructions, warnings and cautions contained herein prior to beginning installation or service activities. While you may have previously
installed or serviced equipment similar to that described in this manual, changes in design, manufacture or procedure may have occurred which significantly affect the present installation or service.
Installation and Environment
Except for installations requiring certification by the manufacturer per federal standards, see that a radiation protection survey is made by a qualified expert in accordance with NCRP 102, section 7, as
revised or replaced in the future. Perform a survey after every change in equipment, workload, or operating conditions which might significantly increase the probability of persons receiving more than
the maximum permissible dose equivalent.
Diagnostic Imaging Systems - Mechanical-electrical Warning
All of the moveable assemblies and parts of this equipment should be operated with care and routinely inspected in accordance with the manufacturer’s recommendations contained in the equipment
manuals.
Only properly trained and qualified personnel should be permitted access to any internal parts. Live electrical terminals are deadly; be sure line disconnects are opened and other appropriate precautions
are taken before opening access doors, removing enclosure panels, or attaching accessories.
Do not under any circumstances, remove the flexible high tension cables from the x-ray tube housing or high tension generator and/or the access covers from the generator until the main and auxiliary
power supplies have been disconnected. Failure to comply with the above may result in serious or fatal bodily injuries to the operator or those in the area.
Electrical-grounding Instructions
The equipment must be grounded to an earth ground by a separate conductor. The neutral side of the line is not to be considered the earth ground. On equipment provided with a line cord, the
equipment must be connected to properly grounded, three-pin receptacle. Do not use a three-to-two pin adapter.
Diagnostic Imaging Systems - Radiation Warning
X-ray and Gamma-rays are dangerous to both operator and others in the vicinity unless established safe exposure procedures are strictly observed.
The useful and scattered beams can produce serious or fatal bodily injuries to any persons in the surrounding area if used by an unskilled operator. Adequate precautions must always be taken to avoid
exposure to the useful beam, as well as to leakage radiation from within the source housing or to scattered radiation resulting from the passage of radiation through matter.
Those authorized to operate, participate in or supervise the operation of the equipment must be thoroughly familiar and comply completely with the current established safe exposure factors and
procedures described in publications, such as: Subchapter J of Title 21 of the Code of Federal Regulations, "Diagnostic X-ray Systems and Their Major Components", and the national council on radiation
protection (NCRP) no. 102, "Medical X-ray And Gamma-ray Protection For Energies Up To 10 Mev-equipment Design and Use", as revised or replaced in the future.
Those responsible for planning of x-ray and gamma-ray equipment installations must be thoroughly familiar and comply completely with NCRP no. 49, "Structural Shielding Design and Evaluation For
Medical Of X-rays and Gamma-rays of Energies Up to 10 Mev", as revised and replaced in the future. Failure to observe these warnings may cause serious or fatal bodily injuries to the operator or those
in the area.
Add additional safety information as needed
Only qualified and system trained Philips service staff is allowed to perform service (installation, maintenance, quality assurance) on the Brilliance CT systems. Make sure that the latest version of the
TM
service instructions are available. Read the corresponding instructions carefully prior to working on the system. For your own safety and for more detailed safety information, refer only to the current
version of the documents.
Use only specified tools and auxiliary materials. After finishing any service activity, ensure that all covers of the Brilliance CT, including the mylar gasket, are closed
TM
Precautionary Measures Regarding Electrical Voltage
Before you start the procedure outlined in this manual, make sure that you read and understand the warnings listed below.
WARNING PRIOR TO ANY SERVICE AND MAINTENANCE ACTIVITIES INSIDE COMPONENTS:
SWITCH OFF THE SYSTEM AT THE MAIN POWER SUPPLY, (USING THE ON-SITE ON-OFF SWITCH) AND THE INTERNAL/EXTERNAL
UNINTERRUPTIBLE POWER SUPPLY (UPS).
MAKE SURE THAT NO OTHER PERSON CAN SWITCH ON POWER OR SWITCH OFF THE SECURITY MEASURES, WHEN INSTALLATION,
MAINTENANCE OR SERVICE WORK ON THE SYSTEM IS PERFORMED.
WARNING IN ADDITION TO THE WARNINGS LISTED ABOVE, MAKE SURE TO FOLLOW ALL SAFETY GUIDELINES AS DESCRIBED IN THE SAFETY
CHAPTER OF THIS MANUAL. FAILURE TO DO SO CAN RESULT IN SEVERE PERSONAL INJURY.
CAUTION Always use an ESD protection wrist strap when servicing any component in the system.
TABLE OF CONTENTS - VOLUME 2
BRILLIANCE DMS
552-7195-0020 DMS - Control (DMC)
552-7200-0051 RCOM
552-7200-0043 Left Backplane
552-7200-0033 Right Backplane
552-7200-0025 ADMC
PHIDMP revision 1.0 DMP Power Driver
PHIDMPM revision 1.0 DMP Power Driver - Motors
PHIDMPL revision 1.0 DMP Power Driver - Logic
PHIDMPP revision 1.0 DMP Power Driver - Power
4550-145-04092 Common DMP
DUAL EXP DMS
552-7190-0021 DMS - Control (DMC)
522-7190-0060 Left Motherboard
522-7190-0050 Right Motherboard
T61B-1712 Detector Module
COMMON PATIENT SUPPORT (COUCH)
4535 670 27511 revision A Couch Functional Interconnect Diagram
4535 670 12211 revision A Couch Cabling Interconnect Diagram
T61-2018 revision F Couch Power Board
T61B-1789 revision C Couch Control Board
T61-2570 revision A Couch Relay Board
T61-3095 revision A Couch Vertical Monitor Board
POSITIONING ENCODER (XILINX CORPORATION)
Encpld
Overpld
Cpmpld
BRILLIANCE CONSOLE
4535 670 27191 revision E CT Box Assembly and Interconnect Wiring Diagram
4535 670 17391 revision B CT Box Switch LED Panel
4535 670 17371 revision C CT Box Display
4535 670 24801 revision B CT Box Disp Control and Mixer
BRILLIANCE POWER ACQUISITOR PCB
4535 670 06471 revision A Acquisitor Schematic
BIG BORE GANTRY
4535 670 26121 revision B 7100/Onco Macquistor Schematic
COMBINED RACK CONSOLE (CRC)
4550 145 03981 revision A CRC Cables Layout
DUAL EXP CONSOLE
T61-3107 revision B Console Block Diagram
T61-2681 revision D CT Box Interconnect
T61-2447 revision B CT Box Switch LED Panel
T61B-1740 revision D CT Box Display
T61B-1741 revision C CT Box Mixer
Dual EXP Acquisitor PCB
473-7190-0290 Assembly Diagram
552-7180-1122 Acquisitor Schematic
552-7180-3112 Memory Card Schematic
