Accurate Dosing
with Repeatable Performance
Aggressive Chemical Dosing Pump Range
INTRODUCING ROTO AGGRESSIVE CHEMICAL
DOSING PUMP
The Roto Aggressive Chemical (AC) Dosing Pump is
our product designed for use with aggressive
chemicals. Suitability is achieved by using materials
of construction that are resistant to the array of
aggressive chemicals found across Industry.
Progressive Cavity Pumps of the dosing type have
distinct advantages over other pump types
commonly used for dosing. The main advantages
are a steady flow without pulsation, a high degree
of accuracy, the ability to handle entrained solids,
suction lift and handling of pressure of up to 24
bar.
Flow - 0.17 to 132 GPH / 0.68-500 LPH
Pressure - Up to 350 PSI / 24 bar
DISTINCTIVE FEATURES & BENEFITS
• Capacity is directly proportional to speed.
• High dosing accuracy of +/-1%.
• Low NPSH required & Inherently Self- Priming.
• Smooth & Non-Pulsating Flow.
• No need to use Pulsation Dampeners or additional valves.
• No vapor lock & non-clogging
• Easily handles clean and clear liquids to abrasive, corrosive, shear
sensitive, viscous and solid laden.
• Easily interchangeability with other models by changing few
components.
ROTO ADVANTAGES
ROTO ADVANTAGES
1. ROTOR
Available in Titanium or Hastelloy material options.
2. STATOR
The elastomeric stator is molded with integral sealing gasket on both ends effectively prevents corrosion of
the stator tube. This design ensures that the pumped media remains isolated, not coming into contact with
the stainless steel metal tube or bonding adhesive. The stator elastomers include; Natural, Nitrile, EPDM,
Chloro-sulphonated rubber, HNBR, Fluoro-elastomer, and Ter-fluoroelastomer.
3. CONNECTIONS
Available in 1" NPT Connection at Suction
and 1/2” NPT Connection at Discharge in
CPVC or Glass Filled PTFE materials.
4. PUMP HOUSING
Designed for 900 interval rotation for ease
in installation. Options available in CPVC
or Glass Filled PTFE materials.
ROTO ADVANTAGES
5. SHAFT SEALING
Available with Single / Double Mechanical Seal. These pumps have provision for Plan 62 as standard. These
pumps have Seal Housing in Hastelloy as standard .
6. TIE RODS
Four SS316 Tie Rods provides torsional stability & greater resistance to
corrosion.
7. PUMP LANTERN
Can accommodate various drives including IEC, NEMA C / Gear
Motors. These can be directly flanged to the pump without
additional couplings or guards.
ROTO ADVANTAGES
8. DRIVE OPTIONS
1. 90V DC Motor – 600 RPM Direct Online.
2. 0.37 kW/0.5 HP Geared Motor.
3. Gearbox and Motor as per NEMA/IEC standard.
4. 0.37 kW/0.5 HP Geared Motor with Integrated VFD to
optimize and control the dosing process.
5. Servo Motor.
6. Tophat version in bare shaft option.
9. PLUG IN SHAFT
The pump and drive are designed for effortless
disassembly, allowing for rapid replacement of
rotating parts and the shaft seal. Dovel pin
ensures a secure shaft-to-drive connection,
while the retaining ring safeguards the bearing
against contamination or shaft leakages.
APPLICATIONS
STRONG ACIDS WASTE WATER OTHER APPLICATIONS
• Hydrochloric Acid (HCl) • Milk of Lime • pH Control
• Sulfuric Acid (H2SO4) • Polymer Solutions • Boiler Water Treatment
• Nitric Acid (HNO3) • Metallic Salts • Flocculants
• Polyelectrolyte • Disinfection
OXIDIZING AGENTS • Poly-aluminium Chloride Solution • Corrosion Inhibitors
• Sodium Hypochlorite (NaClO) • Polyacrylamide Solution • Coagulation (organic and
• Potassium Permanganate • Alum/Polyacrylamide/Concentrated inorganic)
(KMnO4) • Flocculants • Cleaning Chemicals
• Hydrogen Peroxide (H2O2) • Oxygen Scavengers
• Organic or Inorganic
OAGULANTS AND FLOCCULANTS
Contaminate Removal
DISINFECTANTS • Aluminium Sulfate (Al2(SO4)3)
• Boundary Layer Injection
• Sodium Hypochlorite (NaOCl) • Ferric Chloride (FeCl3)
• Chlorine Dioxide (ClO2) • Polyaluminum Chloride (PAC)
• Ozone (O3) • Polyelectrolytes
STRONG BASES
• Sodium Hydroxide (NaOH)
• Calcium Hydroxide (Ca(OH)2)
• Ammonium Hydroxide (NH4OH)
INDUSTRIES
PAPER SUGAR WASTE WATER
CHEMICAL OIL & GAS
SELECTION TABLE
• Flow values are calculated at 500 RPM.
• All values are in LPH
DIMENSIONS
Note - All dimensions are in mm.
