DATA SHEET
Enova® DGX Audio Insert / Extract Board
DGX-AIE (FG1058-705)
Overview
The DGX-AIE is an audio insert / extract board for the Enova DGX 8, 16, 32 and
Enova DGX 64. The board provides insert or extract access to the first 16 video
input or output positions. The Enova DGX 8, 16 and Enova DGX 32 enclosures both
support one audio insert / extract board on the input side and one on the output
side. The Enova DGX 64 supports 4 audio insert /extract boards on the input side
and four on the output side. The audio insert /extract board simplifies system
design by allowing audio from a source located near the Enova DGX to be plugged
directly into the system. This can dramatically reduce the overall cost of the system
by eliminating the need for additional Transmitters or Receivers. Extract embedded
audio and send to a separate audio system to be distributed throughout an
environment.
COMMON APPLICATIONS
The Enova DGX Audio Insert / Extract Board is ideal for applications when local sources such as computers with
analog audio outputs are plugged directly into the Enova DGX. Inserted audio can be embedded onto any Enova
DGX output. The board also allows de-embed audio from Enova DGX HDMI inputs to be sent to a separate audio
system.
FEATURES
De-embed Audio – Breakaway embedded audio from Enova DGX inputs and send to a separate audio system
to distribute throughout an environment
© 2014 AMX. All rights reserved.
Embed Audio – Insert local analog audio into pre-switched digital video paths or post switched digital audio
paths depending on audio insert/extract board location
Individually Configurable – Each audio access point can be individually configured for insertion or extraction
functionality
Hot Swappable – Easily add or replace I/O boards at any time after deployment - the system automatically
recognizes the new configuration and activates the boards
SPECIFICATIONS
ANALOG AUDIO – AUDIO INSERTION
Audio Signal Type Analog stereo, up to 16 channels per enclosure
Analog Input Level (Max) +3 dBu, unbalanced
Input Impedance 10 kΩ
Analog to Digital Conversion 48 kHz Sample Rate, 24-bit
Analog to Digital Reference Level +3 dBu = 0 dBfs
Optimal Analog Audio Operating Range -30 dBu to +2 dBu
Input Connectors 8 pluggable, dual three-position, terminal blocks each
containing two single-ended stereo contacts (supports
28 to 18 AWG)
ANALOG AUDIO – AUDIO EXTRACTION
Audio Signal Type Analog stereo, up to 16 channels per enclosure
Audio Extraction Signal Type Support Requires 2 CH L-PCM (32, 44.1, 48, 88.2, 96, 176.4 and
192kHz at bit depths of 16, 20 and 24)
Analog Output Level (Max) +2.8 dBu, unbalanced
Output Impedance Drive >= 5 kΩ
Output Frequency Response <± 0.3 dB, 20 Hz to 20 kHz
Audio Output THD+N <0.04%, 1 kHz, -10 dBu to +2.8 dBu
Audio Out SNR >95 dB, 20 Hz to 20 kHz Vin=+3 dBu
Digital to Analog Resolution 24 bit, 2 Channel
Digital to Analog Reference Level 0 dBfs = +3 dBu
Optimal Digital Audio Operating Range -30 dBfs to -2 dBfs
Audio Synchronization TBA
Output Connectors 8 pluggable, dual three-position, terminal blocks each
containing two single-ended stereo contacts (supports
28 to 18 AWG)
About AMX
AMX hardware and software solutions simplify the implementation, maintenance, and use of technology to create effective environments. With the increasing number of
technologies and operating platforms at work and home, AMX solves the complexity of managing this technology with reliable, consistent and scalable systems. Our award-winning
products span control and automation, system-wide switching and audio/video signal distribution, digital signage and technology management. They are implemented worldwide in
conference rooms, homes, classrooms, network operation / command centers, hotels, entertainment venues, broadcast facilities, and more. ©2014 AMX. All rights reserved.
Specifications subject to change. Revised 11-August-2014.
[Link] | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
