DATASHEET

B&R AUTOMATION
5D5212.03

OTHER SYMBOLS:
5D521203, 5D5212 03, 5D5212.03

RGB ELEKTRONIKA AGACIAK CIACIEK

SPÓŁKA JAWNA

Jana Dlugosza 2-6 Street

51-162 Wrocław www.rgbelektronika.pl
Poland

[email protected]
+48 71 325 15 05

www.rgbautomatyka.pl

www.rgbautomatyka.pl
www.rgbelektronika.pl
YOUR
PARTNER IN
MAINTENANCE
Repair this product with RGB ELEKTRONIKA ORDER A DIAGNOSIS ∠

LINEAR
ENCODERS PLC
SYSTEMS
INDUSTRIAL
COMPUTERS
ENCODERS CNC
CONTROLS
SERVO AMPLIFIERS
MOTORS

CNC
MACHINES
OUR SERVICES
POWER
SUPPLIERS

OPERATOR
SERVO
PANELS
DRIVERS

At our premises in Wrocław, we have a fully equipped servicing facility. Here we perform all the repair
works and test each later sold unit. Our trained employees, equipped with a wide variety of tools and
having several testing stands at their disposal, are a guarantee of the highest quality service.

Buy this product at RGB AUTOMATYKA BUY ∠

Product Catalog Provit 5000/5600

Perfection in Automation
www.br-automation.com
 Imprint

Providing a high-quality catalog is very important to us. In spite of this conscientious

approach, however, B&R cannot guarantee or assume liability for the correctness,
timeliness, or completeness of the contents and information contained herein. B&R
shall not be held liable for possible tangible or intangible damages caused by in-
correct or incomplete information unless proven to be caused by intent or gross
negligence on the part of B&R. We additionally reserve the right to update the con-
tents and technical characteristics of the products contained herein at any time.

Product Catalog Provit 5000/5600

Publisher:
Bernecker + Rainer Industrie-Elektronik Ges.m.b.H
B&R Strasse 1
5142 Eggelsberg
Austria

Tel.: +43 (0) 7748/6586-0

Fax: +43 (0) 7748/6586-26

[email protected]
www.br-automation.com

Photo credits: B&R

Printing and processing:

Vorarlberger Verlagsanstalt AG, Dornbirn, Austria
www.vva.at

MM-E00631.418

 Provit 5000/5600
Table of contents

System characteristics ................................................................................. 2 4

Typical topologies .........................................................................................2 6
Product overview .......................................................................................... 2 10

Product data sheets ...................................................................................... 2 16

General technical data ..................................................................................2 23

Dimensions ....................................................................................................2 24

Legend strips .................................................................................................2 29

Accessories ....................................................................................................2 30

Index .............................................................................................................. 2 52

Provit 5000/5600 
 System characteristics

Provit 5000/5600 – Modular industrial PCs

24 VDC COM2 ISA/PCI Reset CD-ROM Unlike many other IPC complete solutions, Provit industrial PCs
100 - 240 VAC RS232 slots button drive from B&R have an uncompromising modular design. This means
Floppy that display units and IPC5000C or IPC5600C controllers can be se-
lected and combined as desired when using Provit 5000 and Provit
5600 systems. Limitations, such as the largest display requiring
the most memory and fastest processor, simply don't exist. This
allows both the display unit as well as the controller to be optimally
matched to the respective application.

Made by B&R
Provit industrial PCs are "Made by B&R". As a result, all of the rele-
vant components such as the motherboard and housing are devel-
oped and manufactured by B&R. The latest production and testing
equipment guarantees the high quality that industrial users expect
for continuous operation.

Individually configurable
COM1 PS/2 IPC5000C and IPC5600C industrial PCs offer unique flexibility in
Display RS232 LPT1 mouse this performance class. Their division into bus and system units
means that these industrial PCs can be configured with a varied
Status Ethernet PS/2 number of slots. For example, the IPC5000C can be equipped with
LEDs VGA monitor 10/100 USB keyboard two or five half-size PCI, ISA and PCI/ISA slots. A bus unit with
five slots is available for the IPC5600C as well (four of these slots
IPC5000C, 2 slots are for full-size cards). All bus units are offered in two versions
for 120/230 VAC or 24 VDC. The processor and RAM can also be
selected from the available product spectrum.

Status 24 VDC Floppy Reset CD-ROM Integrated industrial communication

LEDs 100 - 240 VAC button drive IPC5000C and IPC5600C controllers are equipped with all the nec-
COM2 ISA/PCI essary interfaces required for industrial communication:
RS232 slots
• 2 x RS232
• 1 x parallel
• 2 x USB
• 2 x PS/2 for keyboard and mouse
• 1 x VGA for external monitor (in addition to the display unit)
• 1 x Ethernet 10/100 MBit/s
• External floppy drive or remote CD-ROM drive

In addition, other insert cards with interface expansions can be

used at any time.

Reliable operation with CompactFlash

Modularity plays a role even for the mass memory. Instead of an
installed hard disk, the IPC5000C has a slot which can be used to
COM1 PS/2 connect either a hard drive, a CompactFlash adapter, or a combi-
RS232 USB mouse nation of both. CompactFlash memory has an available capacity
between 64 MB and 8 GB. The IPC5600C also offers a second slot
Ethernet PS/2 so that two hard drives can be combined here as well. All of these
VGA monitor Display 10/1000 LPT1 keyboard options are enough to guarantee secure operation for all applica-
tions, even under unusual conditions.
IPC5000C, 5 slots

 Provit 5000/5600
 Extensive system diagnostics
24 VDC Floppy Reset In addition to demands on mechanical stability and load capacity,
100 - 240 VAC button operational safety and diagnostics also play a crucial role. For this
VGA COM2 ISA/PCI PS/2 reason, a logbook is available on the Provit 5000 and Provit 5600
monitor RS232 slots mouse devices to record operating hours, power-on cycles, overtempera-
ture hours, and fan and display operating times. This information
can then be interpreted by the user to gain insight into the opera-
tional status of the IPC.

Optimal user guidance with

touch screen and function keys
Provit 5000/5600 display units are available with diagonals of 10.4"
to 15" and VGA to XGA resolution. The front of the panels feature
IP65 protection from sprayed water. Devices are available with a
touch screen, a touchpad (Provit 5600), and function keys to en-
sure optimum user guidance. Function keys can be individually
marked with symbols using legend strips. Both key and LED func-
tions can be easily defined using software.

Display USB

Status Ethernet COM1 PS/2

LEDs 10/100 RS232 LPT1 keyboard IPC5600C

Product comparison: IPC5000C / IPC5600C

IPC5000C IPC5600C
Processor Intel Celeron 566, Pentium III 600, Pentium III 850 Intel Celeron 566, Pentium III 600, Pentium III 850
Memory 64 - 512 MB 64 - 512 MB
Graphics ATI Rage Mobility M, 4 MB video RAM ATI Rage Mobility M, 4 MB video RAM
Ethernet 1 x 10/100 MBit/s 1 x 10/100 MBit/s
Slots 2 or 5, half-size 5 (1 x half-size, 4 x full-size)
HDD √ √
2 x HDD - √
HDD + CF √ √
2 x CF √ √
Integrated drives CD-ROM CD-ROM, FDD
CD-RW CD-RW, FDD
DVD-ROM, FDD
FDD
Power supply 100 - 240 VAC 100-240 VAC
24 VDC 24 VDC

Provit 5000/5600 
 Typical topologies

Industrial PC for centralized control and visualization

The controller program runs on an industrial PC. The visualization project is integrated with Visual Compo-
nents. A display unit is connected to the PC. The PC is networked over Ethernet TCP/IP; additional Power
Panel-based operator terminals can be also connected via Ethernet. Communication to I/O systems with
axes is handled via fieldbus systems (CAN, ETHERNET Powerlink).

Ethernet TCP/IP Visualization and operation Line communication

Control system

Local / Remote Display Unit

Display unit Power Panel Power Panel Power Panel

Industrial PC

Remote I/O systems

ETHERNET Powerlink

X67 X67 X67

X20 I/O 50 20
Sensors
Actuators Sensors
Actuators

Remote I/O systems

Actuators
Sensors

CAN bus Motion control

System 2003 Remote I/O systems

Actuators
Sensors
ACOPOS ACOPOS ACOPOS System 2003

Control system IPC5000/5600: Compact industrial PCs

Visualization and operation Power Panel: Integrated control, operation, and visualization
Motion control ACOPOS: Intelligent servo drives
Distributed I/O systems X20 System
X67 System: Remote I/O with IP67 protection
System 2003: Compact controllers, remote I/O

 Provit 5000/5600
The PC as a visualization device

The visualization application runs on the 5000/5600 industrial PC as a SCADA application. The control tasks
interact with one or more underlying PLC stations where I/O systems and drives are connected locally or
remotely over fieldbus systems. Additional SCADA stations can be networked via Ethernet TCP/IP.

Ethernet TCP/IP Visualization and operation Line communication

Power Panel Power Panel Power Panel

Display unit
Industrial PC

Control system Control system

Actuators

Actuators
Sensors

Sensors
System 2005 System 2005

Motion control Motion control

Remote I/O systems Remote I/O systems

Acopos Acopos X67 X67 X67 Acopos Acopos X67 X67 X67
X20 System X20 System

Sensors Sensors Sensors Sensors

Actuators Actuators Actuators Actuators

Control system System 2005: Embedded PC-based automation

IPC5000/5600: Compact industrial PCs
Visualization and operation Power Panel: Integrated control, operation, and visualization
IPC5000/5600: Compact industrial PCs
Motion control ACOPOS: Intelligent servo drives
Distributed I/O systems X20 System
X67 System: Remote I/O with IP67 protection

Provit 5000/5600 
 Typical topologies

Industrial PC as a server

Windows XP Professional or Embedded runs on the industrial PC with real-time expansion for
control and drive technology. Automation Runtime AR010 handles the control. Mobile Panel and Power
Panel devices operate on Windows CE as thin clients. Communication to the industrial PC occurs via Eth-
ernet TCP/IP and the Remote Desktop Protocol.

Ethernet TCP/IP Visualization and operation Line communication

Power Panel Power Panel Power Panel

Mobile Panel
Control system
Remote I/O systems
CAN bus

System 2003 X67 X67 X67

X20 System
Industrie PC Sensors
Actuators
ETHERNET Powerlink

Motion control

Remote I/O systems

ACOPOS ACOPOS ACOPOS System 2003

Sensors
Actuators

Control system IPC5000/5600: Compact industrial PCs

Visualization and operation Power Panel: Integrated control, operation, and visualization
Mobile Panel: More than just operation and monitoring
Motion control ACOPOS: Intelligent servo drives
Distributed I/O systems X20 System
X67 System: Remote I/O with IP67 protection
System 2003: Compact controllers, remote I/O

 Provit 5000/5600
Provit 5000/5600 
 Product overview

Device configuration

IPC5000C

Model number Description Number / Combinations

System unit 5C5001.32 FDD connection 2 14 Select 1
5C5001.42 Remote CD-ROM connection 2 14
Bus unit 5C5000.21 2 slots, 100-240 VAC 2 15 Select 1
5C5000.22 2 slots, 24 VDC 2 15
5C5000.31 5 slots, 100-240 VAC 2 15
5C5000.32 5 slots, 24 VDC 2 15
Processor 5C5002.14 Intel Celeron 566 MHz Select 1
5C5002.15 Intel Pentium III 600 MHz
5C5002.16 Intel Pentium III 850 MHz
Memory 9A0004.11 64 MB PC100 DIMM module Select up to 2
9A0004.12 128 MB PC100 DIMM module (any combination)
9A0004.14 256 MB PC100 DIMM module
Mass memory 5A5001.15 30 GB hard disk Select 1
5A5001.16 30 GB hard disk / CompactFlash slot CompactFlash is also necessary for 5A5002.02 and 5A5002.03.
5A5002.02 CompactFlash adapter, 2 slots
5A5002.03 CompactFlash adapter, 1 slot
Drives 5A5009.01 CD-ROM drive Optional, select a maximum of 1
5A5009.02 CD-RW drive Note: Combining 5A5001.16 with 5A5002.02 is not possible.
Display units 2 16 Optional

IPC5600C

Model number Description Number / Combinations

System unit 5C5601.32 FDD connection 2 14 Required
Bus unit 5C5600.03 5 slots, 115/230 VAC 2 15 Select 1
5C5600.04 5 slots, 24 VDC 2 15
Processor 5C5002.14 Intel Celeron 566 MHz Select 1
5C5002.15 Intel Pentium III 600 MHz
5C5002.16 Intel Pentium III 850 MHz
Memory 9A0004.11 64 MB PC100 DIMM module Select up to 2
9A0004.12 128 MB PC100 DIMM module (any combination)
9A0004.14 256 MB PC100 DIMM module
Mass memory 5A5001.15 30 GB hard disk Select up to 2
5A5002.03 CompactFlash adapter, 1 slot CompactFlash is also necessary for 5A5002.02 and 5A5002.03.
Drives 5A5600.01 FDD drive Optional, select a maximum of 1
5A5600.02 FDD/CD-ROM drive
5A5600.05 FDD/DVD-ROM drive
5A5600.07 FDD/CD-RW drive
Display units 2 16 Optional

10 Provit 5000/5600
System units

Model number Short description

5C5001.32 Provit 5000 controller system unit 2 14
For Intel Celeron and Pentium III processors, 4 MB video memory, Intel 82440 BX chipset, 3 DIMM slots, 2 serial interfaces, and 1 parallel interface.
Connections for FPD, monitor, PS/2 AT keyboard, PS/2 mouse, USB, external FDD, and Ethernet 10/100 (twisted pair). Without processor.
5C5001.42 Provit 5000 controller system unit 2 14
For Intel Celeron and Pentium III processors, 4 MB video memory, Intel 82440 BX chipset, 3 DIMM slots, 2 serial interfaces, and 1 parallel interface.
Connections for FPD, monitor, PS/2 AT keyboard, PS/2 mouse, USB, remote CD-ROM drives, and Ethernet 10/100 (twisted pair). Without processor.
5C5601.32 Provit 5600 controller system unit 2 14
For Intel Celeron and Pentium III processors, 4 MB video memory, Intel 82440 BX chipset, 3 DIMM slots, 2 serial interfaces, and 1 parallel interface.
Connections for FPD, monitor, PS/2 AT keyboard, PS/2 mouse, USB, external FDD, and Ethernet 10/100 (twisted pair). Without processor.

Bus units

Model number Short description

5C5000.21 Provit 5000 controller bus unit, 2 slots (1 BR PCI/ISA, 1 half-size PCI). Ready for add-on CD-ROM drive. 2 15
Supply voltage 100-240 VAC. For 5C5001.xx system units.
5C5000.22 Provit 5000 controller bus unit, 2 slots (1 BR PCI/ISA, 1 half-size PCI). Ready for add-on CD-ROM drive. 2 15
24 VDC supply voltage. For 5C5001.xx system units.
5C5000.31 Provit 5000 controller bus unit, 5 slots (1 BR ISA, 1 half-size ISA, 1 half-size ISA/PCI, 2 half-size PCI). 2 15
Prepared for add-on CD-ROM drive. 100 VAC supply voltage. For 5C5001.xx system units.
5C5000.32 Provit 5000 controller bus unit, 5 slots (1 BR ISA, 1 half-size ISA, 1 half-size ISA/PCI, 2 half-size PCI). 2 15
Prepared for add-on CD-ROM drive. 24 VDC supply voltage. For 5C5001.xx system units.
5C5600.03 Provit 5600 controller bus unit, 5 slots (1 half-size ISA, 1 full-size ISA, 1 full-size ISA/PCI, 2 full-size PCI). 2 15
115/230 VAC supply voltage. For 5C5601.xx system units.
5C5600.04 Provit 5600 controller bus unit, 5 slots (1 half-size ISA, 1 full-size ISA, 1 full-size ISA/PCI, 2 full-size PCI). 2 15
24 VDC supply voltage. For 5C5601.xx system units.

Provit 5000/5600 11
 Product overview

Processors

Model number Short description

5C5002.14 Intel Celeron 566 MHz processor
128 KB L2 cache, 66 MHz front side bus
For 5C5001.1x, 5C5601.1x, 5C5001.2x, 5C5601.2x, 5C5001.3x, 5C5601.3x und 5C5001.4x system units; incl. heat sink and fans.
5C5002.15 Intel Pentium III 600 MHz processor
256 KB L2 cache, 100 MHz front side bus
For 5C5001.1x, 5C5601.1x, 5C5001.2x, 5C5601.2x, 5C5001.3x, 5C5601.3x und 5C5001.4x system units; incl. heat sink and fans.
5C5002.16 Intel Pentium III 850 MHz processor
256 KB L2 cache, 100 MHz front side bus
For 5C5001.1x, 5C5601.1x, 5C5001.2x, 5C5601.2x, 5C5001.3x, 5C5601.3x und 5C5001.4x system units; incl. heat sink and fans.

Memory

Model number Short description

9A0004.11 DIMM module, 64 MB PC100 CL2
9A0004.12 DIMM module, 128 MB PC100 CL2
9A0004.14 DIMM module, 256 MB PC100 CL2

Mass memory

Model number Short description

5A5001.15 30 GB Fujitsu hard disk (fixed)
5A5001.16 30 GB hard disk (fixed) / CompactFlash slot
5A5002.02 Dual silicon disk adapter for CompactFlash with 2 slots for operating CompactFlash with the IPC5000C, IPC5600C
5A5002.03 Silicon disk adapter for CompactFlash with 1 slot for operating CompactFlash with the IPC5000C, IPC5600C

12 Provit 5000/5600
Provit 10.4" display units

Model number Short description

5D5210.01 Provit 5000 display unit, 10.4" VGA TFT color display with touch screen (resistive), IP65 protection (front side). 2 16
5D5211.02 Provit 5000 display unit, 10.4" SVGA TFT color display with touch screen (resistive), IP65 protection (front side). 2 16
5D5510.10 Provit 5000 display unit, 10.4" VGA TFT color display, 23 function and 20 system keys, IP65 protection (front side). 2 17
5D5600.01 Provit 5600 display unit, 10.4" VGA TFT color display, 52 function and 26 system keys, PS/2 keyboard interface, IP65 protection (front side). 2 18
5D5600.02 Provit 5600 display unit, 10.4" VGA TFT color display with touchpad (resistive), 52 function and 26 system keys, 2 18
PS/2 keyboard interface, IP65 protection (front side).
5D5600.03 Provit 5600 display unit, 10.4" VGA TFT color display with touchpad (resistive), 52 function and 26 system keys, 2 18
PS/2 keyboard interface, IP65 protection (front side).

Provit 12.1" display units

Model number Short description

5D5211.03 Provit 5000 display unit, 12.1" SVGA TFT color display with touch screen (resistive), IP65 protection (front side). 2 19
5D5601.01 Provit 5600 display unit, 12.1" SVGA TFT color display, 52 function and 26 system keys, PS/2 keyboard interface, IP65 protection (front side). 2 20
5D5601.02 Provit 5600 display unit, 12.1" VGA TFT color display with touchpad (resistive), 52 function and 26 system keys, 2 20
PS/2 keyboard interface, IP65 protection (front side).
5D5601.03 Provit 5600 display unit, 12.1" VGA TFT color display with touch screen (resistive), 52 function and 26 system keys, 2 20
PS/2 keyboard interface, IP65 protection (front side).

Provit 15" display units

Model number Short description

5D5212.02 Provit 5000 display unit, 15" XGA TFT color display with touch screen (resistive), IP65 protection (front side). 2 21
5D5212.04 Provit 5000 IP65 display unit, 15" XGA TFT color display with touch screen (resistive), IP65 protection (front side). 420 x 330 mm (W x H). 2 22

Provit 5000/5600 13
 System units

The system unit is the

central component of the
IPC5000C/IPC5600C.
It contains a chipset, socket
for the processor and RAM
as well as interfaces (serial,
display, etc.).

Mainboard 5C5001.2 5C5001.42 5C5601.2

General information Real-time clock, CMOS backup in the FlashPROM, temperature monitoring (CPU, I/O, display unit)
BIOS AWARD Elite BIOS, Plug and Play compatible AWARD Elite BIOS, Plug and Play compatible AWARD Elite BIOS,
Plug and Play compatible
Processor socket Socket 370 Socket 370 Socket 370
DRAM socket 2 x DIMM PC100, max. 512 MB 2 x DIMM PC100, max. 512 MB 2 x DIMM PC100, max. 512 MB
Slots (hard disk/CF adapter) 1 1 2
Interfaces 5C5001.2 5C5001.42 5C5601.2
COM1 / COM2 Serial RS232, 115 kBit/s, not electrically isolated, 9-pin DSUB plug
LPT1 SPP, EPP, and ECP mode, not electrically isolated, 25-pin DSUB socket
USB 2 x USB 1.1 ports, connection type A 2 x USB 1.1 ports, connection type A 2 x USB 1.1 ports, connection type A
Keyboard Enhanced AT PS/2 Enhanced AT PS/2 Enhanced AT PS/2
Mouse PS/2 PS/2 PS/2
CRT 15-pin DSUB socket 15-pin DSUB socket 15-pin DSUB socket
Display (Panellink) 9-pin DSUB socket 9-pin DSUB socket 9-pin DSUB socket
Ethernet 1 x 10BaseT / 100BaseT 1 x 10BaseT / 100Base T 1 x 10BaseT / 100Base T
External disk drive Yes No Yes
Remote IDE No Yes No
Graphics 5C5001.2 5C5001.42 5C5601.2
VGA controller ATI Rage Mobility M ATI Rage Mobility M ATI Rage Mobility M
Graphics memory 4 MB 4 MB 4 MB

Optional accessories
5A2001.01 External 3.5" floppy disk drive, beige front
5A2001.02 Transparent door for external floppy disk drive 5A2001.01 and 5A2001.05, with lock, sealed with gasket, IP55 protection (front side)
5A2001.05 External 3.5" floppy disk drive, black front
5A5003.03 Front cover for remote CD-ROM drive 5A5003.07
5A5003.07 Remote CD-ROM, incl. mounting bracket, no front cover, for connecting to 5C5001.2x and 5C5601.2x system units,
dimensions 156 x 52 x 164 mm (W x H x D)
5A5009.01 Provit 5000 controller CD-ROM, for 5C5000.2x and 5C5000.3x bus units
5A5009.02 Provit 5000 controller CD-RW, for 5C5000.2x and 5C5000.3x bus units
5A5600.01 Provit 5600 controller FDD, for 5C5601.xx system units
5A5600.02 Provit 5600 controller FDD and CD-ROM, for 5C5601.xx system units
5A5600.05 Provit 5600 controller FDD and DVD-ROM, for 5C5601.xx system units
5A5600.07 Provit 5600 controller FDD and CD-RW, for 5C5601.xx system units
5A5603.01 Fan filters for 5C5600.0x, 10 pieces
AT keyboard (19")
Operating systems
CompactFlash cards

14 Provit 5000/5600
Bus units added to the
system units complete the
housing. They contain PCI
and ISA slots as well as the
power supply.

Slots 5C5000.21 5C5000.22 5C5000.31 5C5000.32 5C5600.03 5C5600.04

Total 2 2 5 5 5 5
B&R ISA 16-bit 1) 1 1 1 1 - -
Half-size ISA 16-bit - - 1 1 1 1
Half-size ISA 16-bit / PCI 32-bit 1 1 1 1 - -
Half-size PCI 32-bit - - 2 2 - -
Full-size ISA 16-bit - - - - 1 1
Full-size ISA 16-bit / PCI 32-bit - - - - 1 1
Full-size PCI 32-bit - - - - 2 2
1) Standard 16-bit ISA interface, but with specific mechanical properties

Supply voltage 5C5000.21 5C5000.22 5C5000.31 5C5000.32 5C5600.03 5C5600.04

Input voltage 100 - 240 VAC 24 VDC 100 - 240 VAC 24 VDC 100 - 240 VAC 24 VDC
50 - 60 Hz 50 - 60 Hz 50 - 60 Hz
Fans 5C5000.21 5C5000.22 5C5000.31 5C5000.32 5C5600.03 5C5600.04
Type / Design Ball bearings, analog control Ball bearings, analog control Ball bearings, analog control
Number
ø 40 mm 2 2 1 1 - -
ø 50 mm - - 2 1 - -
ø 80 mm - - - - 1 1

Optional accessories
9A0001.03 Power cable for IPC5000 / 5600, length 2 m, with standard German plug

Provit 5000/5600 15
 Provit 5000 10.4" display units with touch screen

Display 5D5210.01 5D5211.02

Type TFT color TFT color
Colors 262,144 262,144
Resolution VGA, 640 x 480 pixels SVGA, 800 x 600 pixels
Diagonal 10.4“ 10.4“
Brightness 200 cd/m2 280 cd/m2
Half-brightness time 50,000 h 55,000 h
Touch screen Analog resistive Analog resistive
Interfaces 5D5210.01 5D5211.02
Display Panellink (IPC5000C/IPC5600C) Panellink (IPC5000C/IPC5600C)
Touch RS232 RS232
Distance Max. 10 m Max. 10 m
1) Only remote operation is possible with the IPC5600C due to its mechanical dimensions.

Environmental conditions 5D5210.01 5D5211.02

Temperature
Operation 0 to 50°C 0 to 50°C
Storage -20 to +60°C -20 to +60°C
Relative humidity
Operation 5 - 85%, non-condensing 5 - 85%, non-condensing
Storage T ≤ 40°C: 5% to 90%, non-condensing T ≤ 40°C: 5% to 90%, non-condensing
T > 40°C: < 90%, non-condensing T > 40°C: < 90%, non-condensing
Mechanics 5D5210.01 5D5211.02
Protection type IP65 (front side) IP65 (front side)
IP20 (back side) IP20 (back side)
Outer dimensions (W x H x D [mm]) 310 x 236 x 45 310 x 236 x 45
Weight Approx. 2 kg Approx. 2.4 kg

Optional accessories1)
5A5004.05 Remote CD-ROM / display cable, length 5 m, for Provit 5000/5600.
5A5004.06 Remote panel cable 5 m, 1 x 70°, for Provit 5000/5600, with angled plug.
5A5004.10 Remote CD-ROM / display cable, length 10 m, for Provit 5000/5600.
5A5004.11 Remote panel cable 10 m, 1 x 70°, for Provit 5000/5600, with angled plug.
9A0014.05 RS232 extension cable for remote operation of a display unit with touch screen, length 5 m.
9A0014.10 RS232 extension cable for remote operation of a display unit with touch screen, length 10 m.
1) Attachment cable (30 cm) for the display and touch screen are included with the delivery of display units.

16 Provit 5000/5600
 Display 5D5510.10
Type TFT color
Colors 262,144
Resolution VGA, 640 x 480 pixels
Diagonal 10.4“
Brightness 200 cd/m2
Half-brightness time 50,000 h
Keys 5D5510.10
Function keys 23, with LEDs
System keys 20
Interfaces 5D5510.10
Display Panellink (IPC5000C/IPC5600C) 1)
Distance Max. 10 m
1) Only remote operation is possible with the IPC5600C due to its mechanical dimensions.

Environmental conditions 5D5510.10

Temperature
Operation 0 to 50°C
Storage -20 to +60°C
Relative humidity
Operation 5 - 85%, non-condensing
Storage T ≤ 40°C: 5% to 90%, non-condensing
T > 40°C: < 90%, non-condensing
Mechanics 5D5510.10
Protection type IP65 (front side)
IP20 (back side)
Outer dimensions (W x H x D [mm]) 310 x 387 x 38
Weight Approx. 3.7 kg

Optional accessories1)
5A5004.05 Remote CD-ROM / display cable, length 5 m, for Provit 5000/5600.
5A5004.06 Remote panel cable 5 m, 1 x 70°, for Provit 5000/5600, with angled plug.
5A5004.10 Remote CD-ROM / display cable, length 10 m, for Provit 5000/5600.
5A5004.11 Remote panel cable 10 m, 1 x 70°, for Provit 5000/5600, with angled plug.
5A2500.09 A4 slide-in legend strip template for display units 5D2510.10, 5D2510.22, and 5D5510.10, 1 sheet, with CorelDraw template. 2 29
1) Attachment cable (40 cm) for the display and touch screen are included with the delivery of display units.

Provit 5000/5600 17
 Provit 5600 10.4" display units

Display 5D5600.01 5D5600.02 5D5600.0

Type TFT color TFT color TFT color
Colors 262,144 262,144 262,144
Resolution VGA, 640 x 480 pixels VGA, 640 x 480 pixels VGA, 640 x 480 pixels
Diagonal 10.4“ 10.4“ 10.4“
Brightness 200 cd/m2 200 cd/m2 200 cd/m2
Half-brightness time 50,000 h 50,000 h 50,000 h
Touch - Touchpad Analog resistive touch screen
Keys 5D5600.01 5D5600.02 5D5600.0
Function keys 46, with LEDs 46, with LEDs 46, with LEDs
System keys Number pad, cursor pad, 6 Windows system keys
Interfaces 5D5600.01 5D5600.02 5D5600.0
Display Panellink (IPC5000C/IPC5600C) Panellink (IPC5000C/IPC5600C) Panellink (IPC5000C/IPC5600C)
Touchpad / touch screen - RS232 RS232
Distance Max. 10 m Max. 10 m Max. 10 m
Other 5D5600.01 5D5600.02 5D5600.0
Reset button Accessible behind front cover
AT keyboard (PS/2) Socket accessible behind front cover
FDD panel Optional, accessible behind front cover (maximum distance 1.8 m)
IPC5600C integrated drive Accessible behind front cover if the display unit and PC are mounted together
Environmental conditions 5D5600.01 5D5600.02 5D5600.0
Operational temperature 0 to 50°C
Storage temperature -20 to +60°C
Relative humidity - operation 5 - 85%, non-condensing
Relative humidity - storage T ≤ 40°C: 5% to 90%, non-condensing, T > 40°C: < 90%, non-condensing
Mechanics 5D5600.01 5D5600.02 5D5600.0
Protection type IP65 (front side), IP20 (back side)
Outer dimensions (W x H x D [mm]) 482 x 310 x 31 (19 inch x 7 HU) 482 x 310 x 31 (19 inch x 7 HU) 482 x 310 x 31 (19 inch x 7 HU)
Weight Approx. 4.5 kg Approx. 4.5 kg Approx. 4.5 kg

Optional accessories 1)
5A5004.05 Remote CD-ROM / display cable, length 5 m, for Provit 5000/5600.
5A5004.06 Remote panel cable 5 m, 1 x 70°, for Provit 5000/5600, with angled plug.
5A5004.10 Remote CD-ROM / display cable, length 10 m, for Provit 5000/5600.
5A5004.11 Remote panel cable 10 m, 1 x 70°, for Provit 5000/5600, with angled plug.
5A5600.03 Provit 5600 FDD panel, for display units 5D560x.xx.
5A5602.01 A4 slide-in 10.4" legend strip template for 5D5600.0x display units, 1 sheet, with CorelDraw template. 2 29
9A0014.05 RS232 extension cable for remote operation of a display unit with touch screen, length 5 m.
9A0014.10 RS232 extension cable for remote operation of a display unit with touch screen, length 10 m.
1) Attachment cable (40 cm) for the display and touch screen are included with the delivery of display units.

1 Provit 5000/5600
Provit 5000 12.1" display unit with touch screen

Display 5D5211.03
Type TFT color
Colors 262,144
Resolution SVGA, 800 x 600 pixels
Diagonal 12.1“
Brightness 300 cd/m2
Half-brightness time 50,000 h
Touch screen Analog resistive
Interfaces 5D5211.03
Display Panellink (IPC5000C/IPC5600C)
Touch RS232
Distance Max. 10 m
1) Only remote operation is possible with the IPC5600 due to its mechanical dimensions.

Environmental conditions 5D5211.03

Temperature
Operation 0 to 50°C
Storage -20 to +60°C
Relative humidity
Operation 5 - 85%, non-condensing
Storage T ≤ 40°C: 5% to 90%, non-condensing
T > 40°C: < 90%, non-condensing
Mechanics 5D5211.03
Protection type IP65 (front side)
IP20 (back side)
Outer dimensions (W x H x D [mm]) 379 x 300 x 50
Weight Approx. 4.1 kg

Optional accessories 1)
5A5004.05 Remote CD-ROM / display cable, length 5 m, for Provit 5000/5600.
5A5004.06 Remote panel cable 5 m, 1 x 70°, for Provit 5000/5600, with angled plug.
5A5004.10 Remote CD-ROM / display cable, length 10 m, for Provit 5000/5600.
5A5004.11 Remote panel cable 10 m, 1 x 70°, for Provit 5000/5600, with angled plug.
9A0014.05 RS232 extension cable for remote operation of a display unit with touch screen, length 5 m.
9A0014.10 RS232 extension cable for remote operation of a display unit with touch screen, length 10 m.
1) Attachment cable (40 cm) for the display and touch screen are included with the delivery of display units.

Provit 5000/5600 19
 Provit 5600 12.1" display units

Display 5D5601.01 5D5601.02 5D5601.0

Type TFT color TFT color TFT color
Colors 262,144 262,144 262,144
Resolution SVGA, 800 x 600 pixels SVGA, 800 x 600 pixels SVGA, 800 x 600 pixels
Diagonal 12.1“ 12.1“ 12.1“
Brightness 300 cd/m2 300 cd/m2 300 cd/m2
Half-brightness time 50,000 h 50,000 h 50,000 h
Touch - Touchpad Analog resistive touch screen
Keys 5D5600.01 5D5600.02 5D5600.0
Function keys 46, with LEDs 46, with LEDs 46, with LEDs
System keys Number pad, cursor pad, 6 Windows system keys
Interfaces 5D5600.01 5D5600.02 5D5600.0
Display Panellink (IPC5000C/IPC5600C) Panellink (IPC5000C/IPC5600C) Panellink (IPC5000C/IPC5600C)
Touchpad / touch screen - RS232 RS232
Distance Max. 10 m Max. 10 m Max. 10 m
Other 5D5600.01 5D5600.02 5D5600.0
Reset button Accessible behind front cover
AT keyboard (PS/2) Socket accessible behind front cover
FDD panel Optional, accessible behind front cover (maximum distance 1.8 m)
IPC5600C integrated drive Accessible behind front cover if the display unit and PC are mounted together
Environmental conditions 5D5601.01 5D5601.02 5D5601.0
Operational temperature 0 to 50°C
Storage temperature -20 to +60°C
Relative humidity - operation 5 - 85%, non-condensing
Relative humidity - storage T ≤ 40°C: 5% to 90%, non-condensing, T > 40°C: < 90%, non-condensing
Mechanics 5D5601.01 5D5601.02 5D5601.0
Protection type IP65 (front side) IP65 (front side) IP65 (front side)
IP20 (back side) IP20 (back side) IP20 (back side)
Outer dimensions (W x H x D [mm]) 482 x 310 x 31 (19 inch x 7 HU) 482 x 310 x 31 (19 inch x 7 HU) 482 x 310 x 31 (19 inch x 7 HU)
Weight Approx. 4.5 kg Approx. 4.5 kg Approx. 4.5 kg

Optional accessories 1)
5A5004.05 Remote CD-ROM / display cable, length 5 m, for Provit 5000/5600.
5A5004.06 Remote panel cable 5 m, 1 x 70°, for Provit 5000/5600, with angled plug.
5A5004.10 Remote CD-ROM / display cable, length 10 m, for Provit 5000/5600.
5A5004.11 Remote panel cable 10 m, 1 x 70°, for Provit 5000/5600, with angled plug.
5A5602.02 A4 slide-in 12.1" legend strip template for 5D5601.0x display units, 1 sheet, with CorelDraw template. 2 29
9A0014.05 RS232 extension cable for remote operation of a display unit with touch screen, length 5 m.
9A0014.10 RS232 extension cable for remote operation of a display unit with touch screen, length 10 m.
1) Attachment cable (40 cm) for the display and touch screen are included with the delivery of display units.

20 Provit 5000/5600
Provit 5000 15" display unit with touch screen

Display 5D5212.02
Type TFT color
Colors 262,144
Resolution XGA, 1024 x 768 pixels
Diagonal 15“
Brightness 200 cd/m2
Half-brightness time 50,000 h
Touch screen Analog resistive
Interfaces 5D5212.02
Display Panellink (IPC5000C/IPC5600C)
Touch RS232
Distance Max. 10 m
1) Mounting on IPC5600 only possible using a separate cable set (model no. 5A5601.02)
Environmental conditions 5D5212.02
Temperature
Operation 0 to 50°C, depending on installation
Storage -20 to +60°C
Relative humidity
Operation 5 - 85%, non-condensing
Storage T ≤ 40°C: 5% to 90%, non-condensing
T > 40°C: < 90%, non-condensing
Mechanics 5D5212.02
Protection type IP65 (front side)
IP20 (back side)
Outer dimensions (W x H x D [mm]) 435 x 330 x 51
Weight Approx. 5.4 kg

Optional accessories 1)
5A5004.05 Remote CD-ROM / display cable, length 5 m, for Provit 5000/5600.
5A5004.06 Remote panel cable 5 m, 1 x 70°, for Provit 5000/5600, with angled plug.
5A5004.10 Remote CD-ROM / display cable, length 10 m, for Provit 5000/5600.
5A5004.11 Remote panel cable 10 m, 1 x 70°, for Provit 5000/5600, with angled plug.
9A0014.05 RS232 extension cable for remote operation of a display unit with touch screen, length 5 m.
9A0014.10 RS232 extension cable for remote operation of a display unit with touch screen, length 10 m.
1) Attachment cable (40 cm) for the display and touch screen are included with the delivery of display units.

Provit 5000/5600 21
 Provit 5000 15" display unit with touch screen

Display 5D5212.04
Type TFT color
Colors 262,144
Resolution XGA, 1024 x 768 pixels
Diagonal 15“
Brightness 200 cd/m2
Half-brightness time 50,000 h
Touch screen Analog resistive
Interfaces 5D5212.04
Display Panellink (IPC5000C/IPC5600C)
Touch RS232
Distance Max. 10 m
Environmental conditions 5D5212.04
Temperature
Operation 0 to 50°C, depending on installation
Storage -20 to +60°C
Relative humidity
Operation 5 - 85%, non-condensing
Storage T ≤ 40°C: 5% to 90%, non-condensing
T > 40°C: < 90%, non-condensing
Mechanics 5D5212.04
Protection type IP65 (front side)
IP20 (back side)
Outer dimensions (W x H x D [mm]) 420 x 330 x 38
Weight Approx. 5.5 kg

Optional accessories 1)
5A5004.05 Remote CD-ROM / display cable, length 5 m, for Provit 5000/5600.
5A5004.10 Remote CD-ROM / display cable, length 10 m, for Provit 5000/5600.
5A5007.01 Panel flange adapter type A for display unit 5D5212.04
9A0014.05 RS232 extension cable for remote operation of a display unit with touch screen, length 5 m.
9A0014.10 RS232 extension cable for remote operation of a display unit with touch screen, length 10 m.
1) Attachment cable (40cm) for the display and touch screen are included with the delivery of display units.

22 Provit 5000/5600
General technical data

General technical data IPC5000C IPC5600C

Standards / Compliance
Temperature IEC 61131-2 / IEC 60068-2-x IEC 61131-2 / IEC 60068-2-x
Shock / Tests carried out IEC 61131-2 / IEC 60068-2-27 (except hard disk) IEC 61131-2 / IEC 60068-2-27 (except hard disk)
Vibration / Tests carried out IEC 61131-2 / IEC 60068-2-6 (except hard disk) IEC 61131-2 / IEC 60068-2-6 (except hard disk)
Emission / Tests carried out EN 50081-2 / EN 55022+A1 EN 50081-2 / EN 55022+A1
Immunity / Tests carried out IEC 61131-2 / IEC 61000-4-x IEC 61131-2 / IEC 61000-4-x
Protection type IP20 IP20
Mounting orientation Vertical, ±45° Vertical, ±45°
Operation
Temperature 0 to 50°C 0 to 50°C
Relative humidity 5 to 95% (non-condensing) 5 to 95% (non-condensing)
Weight
2-slot design Approx. 3.9 kg Approx. 7.9 kg
5-slot design Approx. 5 kg
Measurements (W x H x D [mm])
2-slot design 270 x 92.4 x 196
5-slot design 270 x 157.4 x 196 276.9 x 164.9 x 399.2

Provit 5000/5600 23
 Dimensions

2-slot IPC5000C with add-on drive 5-slot IPC5000C with add-on drive

5-slot IPC5600C

All dimensions in mm

24 Provit 5000/5600
 C D
G H

B F

E
A

Outer dimensions - display

Model number A B C D E F G H
5D5210.01 310 236 19.1 271.8 19.6 196.8 41 4
5D5211.02 310 236 19.1 271.8 19.6 196.8 41 4
5D5211.03 379 300 21 337 20.5 259 39.5 5
5D5212.02 435 330 16 403 16 298 39.8 6
5D5510.10 310 387 19.1 271.8 31.3 336.9 40.5 4
5D5600.01 482.6 310.4 28 436.5 16 278 23.3 8
5D5600.02 482.6 310.4 28 436.5 16 278 23.3 8
5D5600.03 482.6 310.4 28 436.5 16 278 23.3 8
5D5601.01 482.6 310.4 28 436.5 16 278 23.3 8
5D5601.02 482.6 310.4 28 436.5 16 278 23.3 8
5D5601.03 482.6 310.4 28 436.5 16 278 23.3 8
All dimensions in mm

Provit 5000/5600 25
 Dimensions

Cutout dimensions - 5D5210.01, 5D5211.02 Cutout dimensions - 5D5211.03

Cutout dimensions - 5D5212.02 Cutout dimensions - 5D5600.0x, 5D5601.0x

All dimensions in mm

26 Provit 5000/5600
Cutout dimensions - 5D5510.10

All dimensions in mm

Provit 5000/5600 27
 Dimensions

420 38

4
R1
330

238

314

Outer dimensions - 5D5212.04 Fastening dimensions - 5D5212.04

Flange dimensions - 5A5007.01

All dimensions in mm

28 Provit 5000/5600
Legend strips

Model number Short description

5A2500.09 Legend strip template 10.4".
For display units 5D2510.10, 5D2510.22 and 5D5510.10. For 2 devices.

Function keys
with legend strips System keys

Model number Short description

5A5602.01 Legend strip template 10.4".
For display units 5D5600.01, 5D5600.02 and 5D5600.03. For 1 device.

Function keys
with legend strips

System keys
Function keys
with legend strips

Model number Short description

5A5602.02 Legend strip template 12.1".
For display units 5D5601.01, 5D5601.02 and 5D5601.03. For 1 device.

Function keys
with legend strips

System keys
Function keys
with legend strips

Provit 5000/5600 29
 Accessories
Product overview

Terminal blocks
Model number Short description
0TB103.8 Connector, 24 VDC, 3-pin male, screw clamps, 3.31 mm², protected against vibration by the screw flange 2 34
0TB103.9 Connector, 24 VDC, 3-pin female, screw clamps, 3.31 mm², protected against vibration by the screw flange 2 34
0TB103.91 Connector, 24 VDC, 3-pin female, cage clamps, 3.31 mm², protected against vibration by the screw flange 2 34
0TB704.9 Terminal block, 4-pin, screw clamps, 1.5 mm² 2 35
0TB704.91 Terminal block, 4-pin, cage clamps, 2.5 mm² 2 35
0TB2105.9010 Terminal block, 5-pin, screw clamps, 1.5 mm² 2 36
0TB2105.9110 Terminal block, 5-pin, cage clamps, 2.5 mm² 2 36
0TB708.91 Terminal block, 8-pin, cage clamps, 1.5 mm² 2 37
0TB710.91 Terminal block, 10-pin, cage clamps, 1.5 mm² 2 38
7TB710.9 Terminal block, 10-pin, screw clamps, 1.5 mm² 2 39
7TB710.91 Terminal block, 10-pin, cage clamps, 2.5 mm² 2 39
0TB1111.8010 Terminal block, 11-pin, screw clamps, 1.5 mm², protected against vibration by the screw flange 2 40
0TB1111.8110 Terminal block, 11-pin, cage clamps, 1.5 mm², protected against vibration by the screw flange 2 40
7TB712.9 Terminal block, 12-pin, screw clamps, 1.5 mm² 2 41
7TB712.91 Terminal block, 12-pin, cage clamps, 1.5 mm² 2 41
7TB718.9 Terminal block, 18-pin, screw clamps, 1.5 mm² 2 42
7TB718.91 Terminal block, 18-pin, cage clamps, 1.5 mm² 2 42

Infrastructure components

Model number Short description

0AC808.9 8x industrial hub (Layer 2), 24 VDC, 10/100 MBit/s with auto-sensing, MDIX switch for channel 1 2 43
0AC401.9 Encoder 5 V - 24 V, converter for 5 V encoders (abs. or incr.) 2 44
0AC912.9 Bus adapter, CAN, 1 CAN interface 2 46
0AC913.92 Bus adapter, CAN, 2 CAN interfaces, including 30 cm connection cable (DSUB connector) 2 46
0AC913.93 Bus adapter, CAN, 2 CAN interfaces, including 30 cm connection cable (TB704) 2 46
0G1000.00-090 Bus connector, RS485, for Profibus networks 2 44
7AC911.9 Bus connector, CAN bus 2 44
ECINT1-1 RS232/RS485 interface converter, electrically isolated, for coupling RS232 interface modules 2 45
to an RS485 twisted pair bus, without lightning protection
ECINT1-11 RS232/RS485 interface converter, electrically isolated, for coupling RS232 interface modules 2 45
to an RS485 twisted pair bus, with lightning protection

CompactFlash
Model number Short description
5CFCRD.0064-03 CompactFlash 64 MB ATA/IDE SiliconSystems
5CFCRD.0128-03 CompactFlash 128 MB ATA/IDE SiliconSystems
5CFCRD.0256-03 CompactFlash 256 MB ATA/IDE SiliconSystems
5CFCRD.0512-03 CompactFlash 512 MB ATA/IDE SiliconSystems
5CFCRD.1024-03 CompactFlash 1024 MB ATA/IDE SiliconSystems
5CFCRD.2048-03 CompactFlash 2048 MB ATA/IDE SiliconSystems
5CFCRD.4096-03 CompactFlash 4096 MB ATA/IDE SiliconSystems
5CFCRD.8192-03 CompactFlash 8192 MB ATA/IDE SiliconSystems

30 Accessories
PC cards

Model number Short description

0MC111.9 PC card, 2 MB FlashPROM
0MC112.9 PC card, 4 MB FlashPROM
0MC211.9 PC card, 2 MB SRAM
9A0015.99 CompactFlash adapter; for operating CompactFlash in a PC card slot

USB accessories

Model number Short description

5MD900.USB2-01 USB 2.0 drive combination, consists of DVD-ROM/CD-RW, FDD, Compact Flash slot (type II), USB connection (type A front, 2 47
type B back); 24 VDC; (screw clamp 0TB103.9 or cage clamp 0TB103.91)
5A5003.03 Front cover for USB drive combination 5MD900.USB2-01
5CAUSB.0018-00 USB 2.0 cable type A-B; 1.8 m
5CAUSB.0050-00 USB 2.0 cable type A-B; 5 m
5MMUSB.0256-00 USB 2.0 flash drive 256 MB
5MMUSB.0512-00 USB 2.0 flash drive 512 MB
5MMUSB.1024-00 USB 2.0 flash drive 1024 MB

Accessories 31
 Accessories
Product overview

Cable Model number Short description

0G0001.00-090 Cable PC <-\> PLC/PW, RS232, online cable
0G0010.00-090 Cable I/O bus expansion, 1 m, bus expansion for System 2005
0G0012.00-090 Cable I/O bus expansion, 2 m, bus expansion for System 2005
9A0017.01 Null modem cable RS232, 0.6 m, for connecting UPS and IPC
9A0017.02 Null modem cable RS232, 1.8 m, for connecting UPS and IPC
X20CA0E61.0002 EPL connection cable RJ45 to RJ45, 0.2 m 2 48
X20CA0E61.0010 EPL connection cable RJ45 to RJ45, 1.0 m 2 48
X20CA0E61.0020 EPL connection cable RJ45 to RJ45, 2.0 m 2 48
X20CA0E61.0050 EPL connection cable RJ45 to RJ45, 5.0 m 2 48
X20CA0E61.0100 EPL connection cable RJ45 to RJ45, 10.0 m 2 48
X20CA0E61.0150 EPL connection cable RJ45 to RJ45, 15.0 m 2 48
X20CA0E61.0500 EPL connection cable RJ45 to RJ45, 50.0 m 2 48
X67CA0E41.0050 EPL attachment cable RJ45 to M12, 5.0 m 2 48
X67CA0E41.0150 EPL attachment cable RJ45 to M12, 15.0 m 2 48
X67CA0E41.0500 EPL attachment cable RJ45 to M12, 50.0 m 2 48
X67CA0X99.1000 Cable for custom prefabrication, 100.0 m

19" AT keyboard

Model number Short description

5E9600.01-010 AT keyboard, 19 inch, front mount installation, IP65 from front, German keyboard layout 2 50
5E9600.01-020 AT keyboard, 19 inch, front mount installation, IP65 from front, US keyboard layout 2 50

Batteries Model number Short description

0AC200.9 Lithium batteries, 5 pcs., 3 V / 950 mAh, cylindrical battery
0AC201.9 Lithium batteries, 5 pcs., 3 V / 950 mAh, button cell
4A0006.00-000 Lithium batteries, 3 V / 950 mAh, button cell

Other Model number Short description

0AC171.9 Glass tube fuses 5 x 20 mm, 20 pcs., 3.15 A T / 250 V
0AC301.9 Accessory, 8x shielding clamp 2 49
5AC900.1100-00 Touch screen pen (5x)
9A0013.01 Pen for resistive touch screen

Data sheets for product-specific accessories can be found in the sections for the respective product families.

32 Accessories
Accessories 33
 Terminal blocks

The single-row 3-pin terminal

block TB103 is used to connect
the supply voltage.

Brief overview 0TB103.8 0TB103.9 0TB103.91

Number of pins 3 (male) 3 (female) 3 (female)
Type of terminal Screw clamps Screw clamps Cage clamps
Distance between contacts 5.08 mm 5.08 mm 5.08 mm
Contact resistance ≤5 mΩ ≤5 mΩ ≤5 mΩ
Rated voltage 300 V 300 V 300 V
Rated current1) 10 A / contact 10 A / contact 10 A / contact
Connection cross section
AWG lines 22 - 12 AWG TBD AWG 26 - 12 AWG
Solid wire lines 0.20 - 2.50 mm² 0.20 - 2.50 mm² 0.20 - 2.50 mm²
Fine wire lines without wire tip sleeves 0.20 - 1.50 mm² 0.20 - 1.50 mm² 0.20 - 2.50 mm²
Fine wire lines with wire tip sleeves 0.20 - 1.50 mm² 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Wire tip sleeves with plastic covering 0.20 - 1.50 mm² 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Cable type Copper wires only (no aluminum wires!) Copper wires only (no aluminum wires!) Copper wires only (no aluminum wires!)
Comment Protected against vibration by the screw Protected against vibration by the screw Protected against vibration by the screw
flange flange flange
Rated values according to UL Rated values according to UL Rated values according to UL

1) The respective limit data for the I/O modules must be taken into consideration.

34 Accessories
Terminal blocks

The single-row 4-pin terminal block

TB704 is used as the supply voltage ter-
minal block and the connection terminal
for fieldbuses.

Brief overview 0TB704.9 0TB704.91 1)

Number of pins 4 4
Type of terminal Screw clamps Cage clamps
Distance between contacts 5.08 mm 5.08 mm
Contact resistance ≤5 mΩ ≤5 mΩ
Rated voltage 300 V 300 V
Rated current2) 10 A / contact 10 A / contact
Connection cross section
AWG lines TBD AWG 26 - 12 AWG
Solid wire lines 0.20 - 2.50 mm² 0.20 - 2.50 mm²
Fine wire lines without wire tip sleeves 0.20 - 1.50 mm² 0.20 - 2.50 mm²
Fine wire lines with wire tip sleeves 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Wire tip sleeves with plastic covering 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Cable type Copper wires only (no aluminum wires!) Copper wires only (no aluminum wires!)
Comment Rated values according to UL Rated values according to UL

1) The terminal block in the cage clamp design cannot be added together.

2) The respective limit data for the I/O modules must be taken into consideration.

Accessories 35
 Terminal blocks

The single-row 5-pin terminal block

TB2105 is also used as a connection
terminal for fieldbuses.

Brief overview 0TB2105.9010 0TB2105.9110 1)

Number of pins 5 5
Type of terminal Screw clamps Cage clamps
Distance between contacts 5.08 mm 5.08 mm
Contact resistance ≤5 mΩ ≤5 mΩ
Rated voltage 300 V 300 V
Rated current2) 10 A / contact 10 A / contact
Connection cross section
AWG lines TBD AWG 26 - 12 AWG
Solid wire lines 0.20 - 2.50 mm² 0.20 - 2.50 mm²
Fine wire lines without wire tip sleeves 0.20 - 1.50 mm² 0.20 - 2.50 mm²
Fine wire lines with wire tip sleeves 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Wire tip sleeves with plastic covering 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Cable type Copper wires only (no aluminum wires!) Copper wires only (no aluminum wires!)
Comment Rated values according to UL Rated values according to UL

1) The terminal block in the cage clamp design cannot be added together.

2) The respective limit data for the I/O modules must be taken into consideration.

36 Accessories
Terminal blocks

The single-row 8-pin terminal block

TB708 is used for making connections
on various B&R modules.

Brief overview 0TB708.91

Number of pins 8
Type of terminal Cage clamps
Distance between contacts 3.5 mm
Contact resistance ≤4.2 mΩ
Rated voltage 300 V
Rated current1) 10 A / contact
Connection cross section
AWG lines 26 - 14 AWG
Solid wire lines 0.20 - 1.50 mm²
Fine wire lines without wire tip sleeves 0.20 - 1.50 mm²
Fine wire lines with wire tip sleeves 0.20 - 1.50 mm²
Wire tip sleeves with plastic covering 0.20 - 1.00 mm²
Cable type Copper wires only (no aluminum wires!)
Comment Mechanical removal help
Rated values according to UL

1) The respective limit data for the I/O modules must be taken into consideration.

Accessories 37
 Terminal blocks

The single-row 10-pin terminal block

0TB710 is used for making connections
on an XV module.

Brief overview 0TB710.91

Number of pins 10
Type of terminal Cage clamps
Distance between contacts 3.5 mm
Contact resistance ≤4.2 mΩ
Rated voltage 300 V
Rated current1) 10 A / contact
Connection cross section
AWG lines 26 - 14 AWG
Solid wire lines 0.20 - 1.50 mm²
Fine wire lines without wire tip sleeves 0.20 - 1.50 mm²
Fine wire lines with wire tip sleeves 0.20 - 1.50 mm²
Wire tip sleeves with plastic covering 0.20 - 1.00 mm²
Cable type Copper wires only (no aluminum wires!)
Comment Mechanical removal help
Rated values according to UL

1) The respective limit data for the I/O modules must be taken into consideration.

38 Accessories
Terminal blocks

The single-row 10-pin terminal block

7TB710 is used to connect
I/O modules.

Brief overview 7TB710.9 7TB710.91

Number of pins 10 10
Type of terminal Screw clamps Cage clamps
Distance between contacts 5.08 mm 5.08 mm
Contact resistance ≤2 mΩ ≤5 mΩ
Rated voltage 300 V 300 V
Rated current 1) 10 A / contact 10 A / contact
Connection cross section
AWG lines 24 - 12 AWG 26 - 12 AWG
Solid wire lines 0.20 - 2.50 mm² 0.20 - 2.50 mm²
Fine wire lines without wire tip sleeves 0.20 - 2.50 mm² 0.20 - 2.50 mm²
Fine wire lines with wire tip sleeves 0.25 - 2.50 mm² 0.20 - 1.50 mm²
Wire tip sleeves with plastic covering 0.25 - 2.50 mm² 0.20 - 1.50 mm²
Cable type Copper wires only (no aluminum wires!) Copper wires only (no aluminum wires!)
Comment Rated values according to UL Rated values according to UL

1) The respective limit data for the I/O modules must be taken into consideration.

Accessories 39
 Terminal blocks

The single-row 11-pin terminal block

TB1111 is used for making connections
on various B&R modules.

Brief overview 0TB1111.8010 0TB1111.8110

Number of pins 11 11
Type of terminal Screw clamps Cage clamps
Distance between contacts 3.5 mm 3.5 mm
Contact resistance ≤4.2 mΩ ≤4.2 mΩ
Rated voltage 300 V 300 V
Rated current1) 10 A / contact 10 A / contact
Connection cross section
AWG lines 28 - 14 AWG 26 - 14 AWG
Solid wire lines 0.20 – 1.50 mm² 0.20 - 1.50 mm²
Fine wire lines without wire tip sleeves 0.20 – 1.50 mm² 0.20 - 1.50 mm²
Fine wire lines with wire tip sleeves 0.20 – 1.50 mm² 0.20 - 1.50 mm²
Wire tip sleeves with plastic covering 0.20 – 1.50 mm² 0.20 - 1.00 mm²
Cable type Copper wires only (no aluminum wires!) Copper wires only (no aluminum wires!)
Comment Protected against vibration by the screw flange Protected against vibration by the screw flange
Rated values according to UL Rated values according to UL

1) The respective limit data for the I/O modules must be taken into consideration.

40 Accessories
Terminal blocks

The single-row 12-pin terminal block

TB712 is used for making connections
on various I/O modules. Removal is
simplified by two ejection levers on the
terminal block.

Brief overview 7TB712.9 7TB712.91

Number of pins 12 12
Type of terminal Screw clamps Cage clamps
Distance between contacts 3.5 mm 3.5 mm
Contact resistance ≤4.2 mΩ ≤4.2 mΩ
Rated voltage 300 V 300 V
Rated current1) 10 A / contact 10 A / contact
Connection cross section
AWG lines 28 - 14 AWG 26 - 14 AWG
Solid wire lines 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Fine wire lines without wire tip sleeves 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Fine wire lines with wire tip sleeves 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Wire tip sleeves with plastic covering 0.20 - 1.50 mm² 0.20 - 1.00 mm²
Cable type Copper wires only (no aluminum wires!) Copper wires only (no aluminum wires!)
Comment Mechanical removal help Mechanical removal help
Rated values according to UL Rated values according to UL

1) The respective limit data for the I/O modules must be taken into consideration.

Accessories 41
 Terminal blocks

The single-row 18-pin terminal block

TB718 is used for making connections
on various I/O modules. Removal is
simplified by two ejection levers on the
terminal block.

Brief overview 7TB718.9 7TB718.91

Number of pins 18 18
Type of terminal Screw clamps Cage clamps
Distance between contacts 3.5 mm 3.5 mm
Contact resistance ≤4.2 mΩ ≤4.2 mΩ
Rated voltage 300 V 300 V
Rated current1) 10 A / contact 10 A / contact
Connection cross section
AWG lines 28 - 14 AWG 26 - 14 AWG
Solid wire lines 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Fine wire lines without wire tip sleeves 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Fine wire lines with wire tip sleeves 0.20 - 1.50 mm² 0.20 - 1.50 mm²
Wire tip sleeves with plastic covering 0.20 - 1.50 mm² 0.20 - 1.00 mm²
Cable type Copper wires only (no aluminum wires!) Copper wires only (no aluminum wires!)
Comment Mechanical removal help Mechanical removal help
Rated values according to UL Rated values according to UL

1) The respective limit data for the I/O modules must be taken into consideration.

42 Accessories
Ethernet hub
AC808

The AC808 Ethernet hub is a standalone device that can be used universally as a Level 2 hub
in standard Ethernet or ETHERNET Powerlink networks. It is suitable for both 100 MBit/s (Fast
Ethernet) and 10 MBit/s networks. The hub recognizes the transfer speed for the channels auto-
matically.1)

The Ethernet connections are made using RJ45 connectors. The pin assignments can be crossed
for the first channel using switches.

The hub can be installed horizontally or vertically on the mounting rail. It also has fastening pos-
sibilities on the sides for direct mounting.

Brief overview 0AC808.9

Type 8x industrial hub (Layer 2)
Interface Ethernet 10/100 Base-T (ANSI/IEEE 802.3)
Cable length Max. 100 m between two stations (segment length)
Transfer rate 10 or 100 MBit/s; 100 MBit/s used for devices with 10/100 MBit/s auto-negotiation 1)
Port design Shielded RJ45 ports
Power supply 24 VDC, max. 5.2 W, protection against reverse polarity
General information 0AC808.9
Status indicators Network activity for each channel, link/collision for each channel, supply voltage
Diagnostics
Bus function Yes, with status LED
Hub supply Yes, with status LED
Certification CE, C-UL-US, GOST-R
Mechanical characteristics 0AC808.9
Dimensions (W x H x D) 115 x 43 (51 with mounting rail) x 86 mm
Protection type IP20
Installation Mounting rail installation and mounting rail adapter included in delivery
Mounting orientation Vertical or horizontal
Operating temperature
Horizontal installation 0°C to +60°C
Vertical installation 0°C to +50°C
Storage temperature -25°C to +70°C
Relative humidity 5 to 95%, non-condensing
Comment Order 1 x TB704 terminal block separately

1) Note: If devices that use 10 MBit/s as well as 100 MBit/s are connected, then there is no communication between these devices. Devices with 10/100 MBit/s auto-negotiation

are always operated at 100 MBit/s on the hub.

Required accessories
0TB704.9 Accessory, terminal block, 4-pin, screw clamps, 1.5 mm² 2 35
0TB704.91 Accessory, terminal block, 4-pin, cage clamps, 2.5 mm² 2 35

Accessories 43
 Level converter
Bus connectors

Brief overview 0AC401.9

Power supply 24 VDC
Overvoltage protection External fuse specified at 10 AT
Input frequency 100 kHz
Power consumption Typ. 6.0 W @ 24 V, the encoder supply (+5 V) is loaded with 500 mA
General information 0AC401.9
Certification CE, C-UL-US, GOST-R
Mechanical characteristics 0AC401.9
Dimensions (W x H x D) 77 x 112.5 x 58 mm
Protection type IP20
Installation DIN rail installation
Mounting orientation Horizontal or vertical
Operating temperature 0°C to +55°C
Storage temperature -20°C to +70°C
Relative humidity 0 - 95%, non-condensing

The RS485 bus connector is The AC911 bus connector is

used to connect a controller used to connect a controller to
to a Profibus network or an a CAN network. The termina-
RS485 network. The termina- tion resistor is integrated in
tion resistor is integrated in the bus connector. The termi-
the bus connector. The termi- nating resistor can be turned
nating resistor can be turned on or off.
on or off.

Brief overview 0G1000.00-090 7AC911.9

Interface
Fieldbus Profibus DP, RS485 network -
Type RS485 CAN
Design 9-pin DSUB plug 9-pin DSUB socket
Connection For two bus lines using screw clamps For two bus lines using screw clamps
Terminating resistors Can be switched on Can be switched on
Stress relief Integrated Integrated
Certification CE, GOST-R CE, GOST-R

44 Accessories
Interface converters
ECINT1

The INT1 interface converter is used to convert RS232 interface signals to an RS485 signal level.
It is used if:

• Data transfer over a long distance is required which cannot be bridged by an RS232 interface.
The distance between two stations can be max. 5000 m when using shielded RS485 cables.
• Electrical isolation is required for the interface.
• A PLC is to be connected to a network using an RS232 interface.

The INT1-11 interface converter is equipped with lightning protection.

Brief overview ECINT1-1 ECINT1-11

Power supply 24 VDC, maximum 4.3 W, protection against reverse polarity 24 VDC, maximum 4.3 W, protection against reverse polarity
Overvoltage protection Yes Yes
Maximum baud rate 115.2 kBaud 115.2 kBaud
Cable length
RS232 Max. 10 m Max. 10 m
RS485 Max. 5,000 m Max. 5,000 m
Operating modes Point-to-point Point-to-point
RS422 network RS422 network
RS485 network RS485 network
Terminating resistors Can be switched on Can be switched on
Lightning protection - Yes
General information ECINT1-1 ECINT1-11
Status indicators RS232 signal lines, RS485 active, supply voltage RS232 signal lines, RS485 active, supply voltage
Diagnostics
Interface function Yes, with status LED Yes, with status LED
Power supply Yes, with status LED Yes, with status LED
Certification CE, GOST-R CE, GOST-R
Mechanical characteristics ECINT1-1 ECINT1-11
Dimensions (W x H x D) 100 x 73 x 114 mm 100 x 73 x 114 mm
Protection type IP20 IP20
Installation Mounting rail or back wall installation using Mounting rail or back wall installation using
M5 screws M5 screws
Mounting orientation Any Any
Operating temperature 0°C to +60°C 0°C to +60°C
Storage temperature -20°C to +70°C -20°C to +70°C
Relative humidity 0 - 95%, non-condensing 0 - 95%, non-condensing

Accessories 45
 Bus adapters
CAN 1x, CAN 2x

Brief overview 0AC912.9 0AC913.92 0AC913.93

Bus adapter CAN 1x CAN 2x CAN 2x
Connection to controller 9-pin DSUB socket, Using 30 cm cable with Using 30 cm cable with
connection made by customer 9-pin DSUB housing 4-pin plug
Networking Using 9-pin terminal block Using 9-pin DSUB plug (C1) and Using 9-pin DSUB plug (C1) and
9-pin DSUB socket (C2) 9-pin DSUB socket (C2)
Terminating resistors Can be switched on Can be switched on Can be switched on
Installation DIN rail installation DIN rail installation DIN rail installation
Mounting orientation Horizontal or vertical Horizontal or vertical Horizontal or vertical
Certification CE, GOST-R CE, GOST-R CE, GOST-R

46 Accessories
USB drive combination

General information 5MD900.USB2-01

Transfer rate Low speed (1.5 MBit/s), full speed (12 MBit/s), to high speed (480 MBit/s)
Maximum cable length 5 m (without hub)
CD/DVD formats Read Write
CD-ROM CD-R/RW
CD-RW DVD-R/RW
CD-R DVD-RAM
CD-DA DVD+R/RW
Photo CD (single/multi-session) DVD+R (double layer)
Enhanced CD
DVD-ROM
DVD-R, +R
DVD-RW, +RW
DVD video
DVD RAM (4.7 GB, 2.6 GB)
CD/DVD speed CD: 24 x / DVD: 8 x CD: 24 x / DVD: 8 x
Floppy disk drive 1.44 MB
CompactFlash slot Type II
Interfaces USB 2.0: front (type A), back (type B)
Power supply 24 VDC ±25%
Environmental conditions 5MD900.USB2-01
Environmental temperature
Operation +5°C to +45°C
Storage -20°C to +60°C
Transport -40°C to +65°C
Relative humidity
Operation 8 - 80% (non-condensing)
Storage 5 - 95% (non-condensing)
Transport 5 - 95% (non-condensing)
Mechanical characteristics 5MD900.USB2-01
Protection type IP65 front side (only with optional front cover), IP20 back side
Dimensions (W x H x D) 156 x 52 x 140 mm

Required accessories
0TB103.9 Connector, 24 VDC, 3-pin female, screw clamps, 3.31 mm², 2 34
protected against vibration by the screw flange
0TB103.91 Connector, 24 VDC, 3-pin female, cage clamps, 3.31 mm², 2 34
protected against vibration by the screw flange
5A5003.03 Controller R-IDE front cover
5CAUSB.0018-00 USB 2.0 cable type A-B; 1.8 m
5CAUSB.0050-00 USB 2.0 cable type A-B; 5 m
5SWUTI.0000-00 Nero CD-RW OEM software. Only available with a CD-RW drive.

Accessories 47
 ETHERNET Powerlink cables

ETHERNET Powerlink cable

RJ45 to RJ45

Length Connection cable

Model number Short description
0.2 m X20CA0E61.0002 EPL connection cable RJ45 to RJ45, 0.2 m
1.0 m X20CA0E61.0010 EPL connection cable RJ45 to RJ45, 1.0 m
2.0 m X20CA0E61.0020 EPL connection cable RJ45 to RJ45, 2.0 m
5.0 m X20CA0E61.0050 EPL connection cable RJ45 to RJ45, 5.0 m
10.0 m X20CA0E61.0100 EPL connection cable RJ45 to RJ45, 10.0 m
15.0 m X20CA0E61.0150 EPL connection cable RJ45 to RJ45, 15.0 m
50.0 m X20CA0E61.0500 EPL connection cable RJ45 to RJ45, 50.0 m

ETHERNET Powerlink cable

RJ45 to M12

Length Connection cable

Model number Short description
5m X67CA0E41.0050 EPL attachment cable RJ45 to M12, 5.0 m
15 m X67CA0E41.0150 EPL attachment cable RJ45 to M12, 15.0 m
50 m X67CA0E41.0500 EPL attachment cable RJ45 to M12, 50.0 m

For detailed information and support: www.br-automation.com

48 Accessories
8 connection shielding clamp
AC301

The AC301 8 connection shielding clamp is used for optimal cable shielding for analog signal
lines, as well as encoder and counter signals. The cable shields are screwed directly on the shield
bracket. The required mounting materials are included in the delivery.

Short description 0AC301.9

Number of cable shield clamps 8
Type of terminal 4 x screw clamps (sets of two)
Dimensions including shield clamps (W x H x D) 76 x 25 x 22 mm

Accessories 49
 19" AT keyboard

General information 5E9600.01-010 5E9600.01-020

Keyboard format German English
Installation Front mount installation, 19" format Front mount installation, 19" format
Connection PS/2 plug PS/2 plug
Environmental conditions 5E9600.01-010 5E9600.01-020
Environmental temperature
Operation 0°C to +55°C 0°C to +55°C
Storage / Transport -20°C to +60°C -20°C to +60°C
Relative humidity 5 - 95% (non-condensing) 5 - 95% (non-condensing)
Mechanical characteristics 5E9600.01-010 5E9600.01-020
EN 60529 protection IP65 (front side) IP65 (front side)
Dimensions (W x H x D) 482.6 x 177 x 35 mm 482.6 x 177 x 35 mm

50 Accessories
Accessories 51
 Index

0 5A5003.03 2 31 5E9600.01-020 2 50

0AC171.9 2 32 5AC900.1100-00 2 32 5MD900.USB2-01 2 47

0AC200.9 2 32 5C5000.21 2 15 5MMUSB.0256-00 2 31

0AC201.9 2 32 5C5000.22 2 15 5MMUSB.0512-00 2 31

0AC301.9 2 32 5C5000.31 2 15 5MMUSB.1024-00 2 31

0AC401.9 2 44 5C5000.32 2 15

0AC808.9 2 43 5C5001.32 2 14 7
0AC912.9 2 46 5C5001.42 2 14 7AC911.9 2 44

0AC913.92 2 46 5C5002.14 2 12 7TB710.9 2 39

0AC913.93 2 46 5C5002.15 2 12 7TB710.91 2 39

0G0001.00-090 2 32 5C5002.16 2 12 7TB712.9 2 41

0G0010.00-090 2 32 5C5600.03 2 15 7TB712.91 2 41

0G0012.00-090 2 32 5C5600.04 2 15 7TB718.9 2 42

0G1000.00-090 2 44 5C5601.32 2 14 7TB718.91 2 42

0MC111.9 2 31 5CAUSB.0018-00 2 31

0MC112.9 2 31 5CAUSB.0050-00 2 31 9
0MC211.9 2 31 5CFCRD.0064-03 2 30 9A0004.11 2 12

0TB103.8 2 34 5CFCRD.0128-03 2 30 9A0004.12 2 12

0TB103.9 2 34 5CFCRD.0256-03 2 30 9A0004.14 2 12

0TB103.91 2 34 5CFCRD.0512-03 2 30 9A0013.01 2 32

0TB1111.8010 2 40 5CFCRD.1024-03 2 30 9A0015.99 2 31

0TB1111.8110 2 40 5CFCRD.2048-03 2 30 9A0017.01 2 32

0TB2105.9010 2 36 5CFCRD.4096-03 2 30 9A0017.02 2 32

0TB2105.9110 2 36 5CFCRD.8192-03 2 30

0TB704.9 2 35 5D5210.01 2 16 ECINT

0TB704.91 2 35 5D5211.02 2 16 ECINT1-1 2 45

0TB708.91 2 37 5D5211.03 2 19 ECINT1-11 2 45

0TB710.91 2 38 5D5212.02 2 21

5D5212.04 2 22 X20
4 5D5510.10 2 17 X20CA0E61.0002 2 48

4A0006.00-000 2 32 5D5600.01 2 18 X20CA0E61.0010 2 48

5D5600.02 2 18 X20CA0E61.0020 2 48

5 5D5600.03 2 18 X20CA0E61.0050 2 48

5A5001.15 2 12 5D5601.01 2 20 X20CA0E61.0100 2 48

5A5001.16 2 12 5D5601.02 2 20 X20CA0E61.0150 2 48

5A5002.02 2 12 5D5601.03 2 20 X20CA0E61.0500 2 48

5A5002.03 2 12 5E9600.01-010 2 50

52 Index
X67
X67CA0E41.0050 2 48

X67CA0E41.0150 2 48

X67CA0E41.0500 2 48

X67CA0X99.1000 2 32

Index 53
54 Index
Provit 5000/5600 55
 All trademarks presented are the property of their respective company. We reserve the right to make technical changes.
COMPANY HEADQUARTERS
Bernecker + Rainer Industrie-Elektronik Ges.m.b.H.
B&R Strasse 1
5142 Eggelsberg
Austria

© 2006 by B&R. All rights reserved.

Tel.: +43 (0) 77 48 / 65 86 - 0
Fax: +43 (0) 77 48 / 65 86 - 26
[email protected]

MM-E00631.418
www.br-automation.com

Always close by - 120 offices in more than 50 countries - www.br-automation.com/contact

Argentina • Australia • Austria • Belarus • Belgium • Brazil • Bulgaria • Canada • Chile • China • Croatia • Cyprus • Czech Republic
Denmark • Egypt • Emirates • Finland • France • Germany • Greece • Hungary • India • Indonesia • Ireland • Israel • Italy • Japan • Korea
Kyrgyzstan • Malaysia • Mexico • The Netherlands • Norway • Pakistan • Poland • Portugal • Romania • Russia • Singapore
Slovakia • Slovenia • South Africa • Spain • Sweden • Switzerland • Taiwan • Thailand • Turkey • Ukraine • United Kingdom • USA