Foxboro™ DCS

V91 Virtualization Server

PSS 41H-4V91
Product Specification

November 2022

https://www.se.com
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its
subsidiaries referred to in this guide are the property of Schneider Electric SE or its
subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished
for informational use only. No part of this guide may be reproduced or transmitted in
any form or by any means (electronic, mechanical, photocopying, recording, or
otherwise), for any purpose, without the prior written permission of Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide
or its content, except for a non-exclusive and personal license to consult it on an "as is"
basis. Schneider Electric products and equipment should be installed, operated,
serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information
contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informational
content of this material or consequences arising out of or resulting from the use of the
information contained herein.
Overview V91 Virtualization Server

Overview
Virtualization is a technology that allows consolidation of multiple servers into a single
physical server. This consolidation into a 2U rack-mounted package consumes fewer
plant resources. The package is easier to install and maintain. It delivers the
technological foundation for high available topologies enabling live migration from
running VMs from one physical server instance to a redundant partner and centralized
management (CVM) of two or more virtualization servers. The V91 Foxboro DCS
Virtualization Server can host up to fourteen Virtual Machines (VM).
The Model V91 Foxboro DCS virtualization server host is a 2U rack-mount server
running the Microsoft Windows Server® 2016 operating system. In addition, a virtual
machine running the Microsoft Windows Server 2016 operating system can be used
as a Domain Controller for the V91 Model host servers. Through the use of Microsoft
Hyper-V virtualization technology, the V91 is capable of hosting virtual machines
running Microsoft Windows Server 2016 operating system.
The virtual machines that are supported include:
• Foxboro DCS virtual machines with Control Core Services v9.4 or later and
Control Software v7.1 or later on the Foxboro DCS Control Network
• Virtual machines using the Schneider Electric-provided virtual machine operating
system image on networks other than the Control Network
The V91 Server is available with a user-configurable model code.
NOTE: The cover image represents a fully configured server and might show
configuration options (for example, hard disks or PCI cards) that are not part of an
actual product order.

PSS 41H-4V91, Rev C 3

V91 Virtualization Server Features

Features
The Model V91 Host Server running Server 2016 allows for the following features:
• Replication - Replica VMs are automatically created and synchronized to a
replica V91 host
• Live Migration - Ability to move an active VM from one host to another with no
disruption to the operator
• Centralized Management - Ability to monitor and maintain one or more V91
Virtualization Servers from a remote location
• NIC Teaming - Provides redundancy at the Virtualization host for off control
networks
• VM Export without shutdown
NOTE: In order to take advantage of Replication, Live Migration, and
Centralized Management, a user-supplied network, referred to as the Virtual
Host Network, and a Server 2016 Active Directory domain are required. A
user-friendly application is provided to simplify the installation and
configuration of this domain.
Other Model V91 Server features include:
• A single or dual processor (each with eight cores), up to 384 GB of memory, up to
eight internal hard drives, redundant hot-swappable power supplies, and optional
Redundant Array of Independent Disks (RAID) configurations
• The ability to host up to 14 virtual machines running Microsoft Windows Server
2016. One of the virtual machines can be configured to run Microsoft Windows
Server 2016 operating system as a Domain Controller for V91 host servers.
• McAfee® Endpoint Security helps provide security on the V91 server
• Security by Local Group Policies to provide additional layer of protection
• Virtual machines on a V91 can:
◦ Be a control processor host and/or provide historization and Foxboro DCS
monitoring functions as a Schneider Electric station
◦ Serve as a Foxboro DCS workstation or Control Core Services application
platform and a human interface station (can open the VM directly)
◦ Function as Remote Desktop Services servers to support up to 30 Foxboro™
DCS FoxView per VM or up to 10 Foxboro™ DCS Control HMI remote clients
per VM with a limit of 60 RDP sessions across all VMs on a V91 server
◦ Support enterprise security Foxboro DCS software with optional McAfee
software package. McAfee Endpoint Security provides additional security
enhancement features to help complement the security features already built
into our products. For stations operating in Local Edition mode, McAfee
Endpoint Security (ENS) provides advanced Threat Prevention. For stations
operating in Enterprise Edition mode, McAfee ePolicy Orchestrator (ePO)
provides all the security of ENS plus Rogue System Detection, Application
Whitelisting, Integrity Control and Device Control for Data Loss Prevention
(DLP). The license entitlement for the first five years after purchase for all of
the listed options is included for the V91 server. After the five years, a renewal
is required with the purchase of the McAfee five year license (J0202AS) for
each V91 server using any McAfee products.
NOTE: McAfee Endpoint Security is included with Model V91, However, it is
not pre-installed/ configured on the system. For additional McAfee security
protection options, see PSS 41S-4MCAFEE.

4 PSS 41H-4V91, Rev C

Features V91 Virtualization Server

V91 Physical Operating System Environment (POSE):

Windows Server 2016 Operating System
The Physical Operating System Environment (POSE) on the V91 server is the
Windows Server 2016 operating system. This pre-installed Windows Server 2016
operating system image on the V91 provides the foundation necessary to support
hosting of virtual machines. The image includes:
• Microsoft Hyper-V virtualization technology, which is required for creating,
hosting, and managing virtual machines
• Veritas System Recovery Virtual Edition for backing up of an entire V91 server
(including all of the hosted virtual machines). A backup can be done live, without
rebooting the V91 or any of the individual virtual machines
• Operating system hardening:
◦ Unnecessary services, software, and programs are removed
◦ Unneeded software ports are disabled
◦ Secure BIOS changes
Since the V91’s POSE Windows Server 2016 operating system’s entire purpose is to
support Schneider Electric virtual machines, the only software to be installed on it is
Schneider Electric-supplied software directly related to the health and support of
virtual machines.
In addition, Foxboro DCS, Foxboro DCS Control Software, or third-party applications
cannot be installed on the Windows Server 2016 operating system image shipped
with the V91 server virtualization host.
The V91 server supports these peripherals: a mouse, QWERTY keyboard, 23-inch flat
panel LCD monitor (purchased separately), optional USB touchscreen (purchased
separately with the monitor), and 1Gb copper / fiber network interface. The V91 server
does not support the use of serial GCIO annunciator keyboards, Foxboro DCS USB
annunciator keyboards, remote graphics units, GPS time synch cards, or local
printers.

V91 Virtual Operating System Environment (VOSE): Virtual

Machines
The V91 server is shipped with a Schneider Electric-created virtual machine operating
system image. By using this supplied virtual machine operating system image with the
Microsoft Hyper-V technology, the V91’s virtual operating system environments
(VOSE) can be created. Each virtual machine created with the Schneider Electric-
supplied image has its own self-contained virtual operating system environment
(VOSE) which includes:
• 64-bit Windows Server 2016 operating system which is required for loading
software applications onto the virtual machine
• Veritas System Recovery 2018 Virtual Edition v18 (K0204BE) software; which is
required for backing up individual virtual machines. The procedure to back-up a
virtual machine using Veritas System Recovery is very similar to performing the
procedure on a physical machine.
• Operating system hardening:
◦ Unnecessary services, software, and programs are removed
◦ Software ports not required are disabled
Virtual machines can be used with Control Core Services v9.4 or later and Control
Software v7.1 or later on the Foxboro DCS Control Network, and can also provide a
platform for Schneider Electric, third-party, and user-written applications.

PSS 41H-4V91, Rev C 5

V91 Virtualization Server Features

A virtual machine can:

• Host Foxboro DCS control stations
• Serve as an application platform
• Run Remote Desktop Services (formally known as Terminal Services)
• Connect to a thin client over the DCS Auxiliary Communications Network to
provide human-machine interface (HMI) station functionality
• Use security enhancements provided by these McAfee software packages:
◦ For stations operating in Local Edition mode, McAfee Endpoint Security (ENS)
provides advanced Threat Prevention
◦ For stations operating in Enterprise Edition mode, McAfee ePolicy
Orchestrator (ePO) provides all the security of ENS plus Rogue System
Detection, Application Whitelisting, Integrity Control and Device Control for
Data Loss Prevention (DLP)
NOTE: Virtual machines (VMs) can be ordered with or without EndPoint
Protection (EPP). Ordering without EPP is only applicable for markets where local
teams add an EPP solution to the VMs before delivering to client. When ordered
with EPP selected, McAfee Endpoint Security licensing is included with each VM.
However, it is not pre-installed/configured on the system.

NOTICE
POTENTIAL SYSTEM VULNERABILITIES
Install and configure EPP on all virtual machines (VMs) to help protect against
system vulnerabilities.
Failure to follow these instructions can result in system vulnerabilities.

The virtual machines hosted by the V91 server connect to the network through
internal virtual switches that map virtual machines to the V91’s physical 1Gb copper /
fiber Ethernet ports. The virtual switch network can be configured to map network
connectivity to:
• The Control Network
• The DCS Auxiliary Communications Network (ACN), a 1Gb network comprised of
managed Ethernet switches
• Other auxiliary networks
A combination of these different network types can be used.
The virtual machine’s network connectivity is configured independently from other
virtual machines hosted by the same V91 server. Each network utilizes a dedicated
physical 1Gb copper / fiber Ethernet port. The Control Network has two dedicated
1Gb Ethernet ports while the DCS Auxiliary Communications Network (ACN) has one
or more dedicated 1Gb Ethernet ports optionally configured to use NIC teaming.
With the exception of the Ethernet network ports, virtual machines cannot access the
V91 physical ports (serial, USB, etc.) Therefore, virtual machines only support
peripherals that are connected through the network, such as thin clients and network
printers. Remote graphics units, GPS time synch cards, and local printers are not
supported on virtual machines. A virtual machine can access the USB annunciator
keyboard through a thin client.

6 PSS 41H-4V91, Rev C

Features V91 Virtualization Server

Virtual Machine Configurations

A V91 server can host virtual machines with these configurations:
• Single processor virtual machines
• Multi-processor virtual machines (only supported for virtual machines with Control
Core Services v9.4 or higher connected to the Control Network and virtual
machines using the Schneider Electric-provided virtual machine operating system
image on networks other than the Control Network)
• A mix of single processor virtual machines and multi-processor virtual machines

Sizing
• A V91 server can support up to fourteen virtual machines.
• The maximum number of RDP sessions depends on the number and types of
applications being run in the remote sessions. This includes the number of
process control points being updated, number of alarms being delivered, number
of displays open, etc. If your application needs are high, you might find the actual
number of client sessions to be lower. Experimental results indicate that for
planning purposes, the number of RDP sessions per virtual machine cannot
exceed 30 RDP sessions for FoxView VMs and 10 RDP sessions for Control HMI
VMs.
• The total number of RDP sessions across all VMs on a V91 server cannot exceed
60.

Licensing
There are no Foxboro DCS licenses associated with the V91 server itself. However,
each virtual machine must have the proper Foxboro DCS license. Virtual machine
Foxboro DCS licenses are identical to physical machine licenses.

Optional High Availability For Vital Applications

The Foxboro DCS has the option of running vital run-time applications such as the
Control HMI, current Alarm Displays, and Historian (collectors and servers) in parallel
on two separate machines. When this functionality is combined with virtualization to
run on two physical V91 servers - separated geographically to keep a single condition
from affecting both hosts – time, effort, and cost to restore system can be reduced.
V91 Server enhances the virtualization product offering by providing the ability to
automate the creation of VM replicas from one V91 host to another using Microsoft
Replication. It also reduces disruption of planned maintenance with the ability to move
live VMs from one V91 host to another with no operator interruption using Live
Migration.

PSS 41H-4V91, Rev C 7

V91 Virtualization Server V91 Recommended Minimum (Base) Configuration

V91 Recommended Minimum (Base) Configuration

The V91 default configuration is the minimum recommended hardware for supporting
two virtual machines. Options are available to increase the capacity of the V91 to
support additional virtual machines or reduce RAID and security peripherals if they are
not required.
The Model V91 server base configuration includes:
• Microsoft Hyper-V virtualization technology through the pre-configured and
installed Windows Server 2016 physical operating system environment (POSE)
• Three McAfee ENS licenses are provided to license the V91 host and first two
VMs
• Virtualization hosting support for two virtual machines with Microsoft Windows
Server 2016 Edition operating system, 64-bit package (virtual operating system
environment (VOSE))
• Intel Xeon Processor
NOTE: HPE DL380 Gen10 Intel Xeon-Silver 4110 (2.1GHz/8-core/85W)
Processor Kit (P/N RH103DQ) is available for a field upgrade/expansion to a
second processor. Additional HPE 16GB (1x16GB) Single Rank x8 DDR4-
2666 Registered Memory P/N RH103DR) is needed in the second CPU
memory slot with the second processor.
• Quad head graphics card with four mini-DP ports, four adapters from mini-DP to
standard display port are provided
• 16 GB DDR-4 Registered Memory
• Two 600 GB SAS hard drives in RAID 1 for operating system “C” drive and two
600 GB SAS hard drives for “D” drive
• Four integrated 10/100/1000Base-TX Ethernet ports
• Internal SATA CD-RW/DVD drive
• Two rear USB 3.0 ports
• Two front USB 2.0 ports / One front USB 3.0 port
• Redundant hot-swap power supplies
• Redundant hot-swap fans
• USB keyboard
• USB mouse

8 PSS 41H-4V91, Rev C

V91 Recommended Minimum (Base) Configuration V91 Virtualization Server

V91 Options
The Model V91 server offers these options:
• Expandable virtualization hosting support for up to fourteen Virtual Machines
running Microsoft Windows Server 2016 operating system, 64 bit package
• McAfee ENS licenses for the host and up to fourteen Virtual Machines
• Dual Intel Xeon CPU processor
• Up to 384 GB registered memory
• No disk unavailability protection - One 600 GB SAS hard drive for operating
system “C” drive and one 600 GB SAS hard drives in RAID 0 for “D” drive
• Disk unavailability protection - Two 600 GB SAS hard drives in RAID 1 for
operating system “C” drive and three 600 GB SAS hard drives in RAID 5 “D” drive
or three, four, five or six 1.2 TB SAS hard drives in RAID 5 with a hot spare for “D”
drive
• Options provide up to 4.8 TB total available disk space for virtual machines
• Single or dual port fiber NICs
• Single or dual port copper NICs

Mounting Options
The V91 is a 2U high, rack mount server which offers:
• Rail mounting kit as standard equipment
• Optional 2U cable management arm for easy rail mounting kit
The V91 can be placed in commercially available enclosures that have provisions for
adequate ventilation and cooling to maintain the ambient temperature inside the
enclosure does not exceed 95°F (35°C). If the enclosure ambient temperature is
higher than 95°F (35°C), additional fans are needed. See the Cooling section under
Functional Specifications, page 10
NOTE: Enclosures must accommodate a depth of at least 39.4 in (1000 mm) to
allow space for air flow at the front and back of the unit plus cables at the back of
the unit. Because of their depth, the V91 cannot be mounted in the standard single
depth rack enclosures.
With dual monitor PCIe video cards, the V91s can be located up to 4.5 m (15 ft) from
the monitor using direct connect and other human interface cables available from
Schneider Electric.
As indicated by the CE logo, the V91 conforms to the applicable European Union
Directives.

Schneider Electric Part Numbers

These rail mounting part-numbered kits are available.

Part No. Description

P0928MN HP 2U SFF Easy Install Rail Kit
P0928MR HP 2U Cable Mgmt Arm For Easy Install Rail Kit
RH103ES High Performance Temp Fan Kit HP DL380 G10 Rack
Server

PSS 41H-4V91, Rev C 9

V91 Virtualization Server Functional Specifications

Functional Specifications
Processor Type Intel Xeon
Memory 16 GB DDR4 Registered Memory
Devices Served SAS Peripherals
• One 600 GB internal system disk drive (with option for a second one in a RAID1
configuration) for boot operating system, with one 600 GB disk drive with an option
for up to six 1.2 TB drives as an option in a RAID 5 configuration for use with the
virtual machines.
Controller Peripherals
• One SATA CD-RW/DVD drive
Video Displays (Up to 2)
• 23-inch LCD USB Touchscreen Monitor
• 23-inch LCD Monitor
Interfaces to External Devices (USB)
• Mouse or Optional Trackball
• Alphanumeric Keyboard
• Up to four optional touchscreen monitors
• Audio Speakers
Internal Diagnostics Self-checking performed at power-up
Video Output Type
• Quad mini-DP 1.4 port PCIe graphics card with adapters to standard display port, up
to 4 x1920x1080 (Full HD) pixel resolution
Screen Presentation
• Refresh Rate
◦ Up to 85 Hz
• Colors
◦ 32 bit
• Resolution
◦ Widescreen (16:9) (Supported by 23-Inch LCD Monitor)
◦ Up to 1920x1080 pixels
Ethernet Interface PCIe Ethernet network interface cards providing connection to Ethernet data bus (10/
Communications 100Base-TX or 100Base-FX)
Four Integrated Ethernet ports (10/100/1000Base-T)
Power Supplies Two redundant, hot swappable, 800 W auto-switching input power supplies, each with a
separate power cord
Power Requirements
Power Parameters

HPE 800W Power Supply Kit (865414–B21)

Normal Input Voltage 100 120 127 200 208 220 230 240
(V rms)
Normal Input Current 9.1 7.5 7.0 4.4 4.2 4.0 3.8 3.6
(A rms)

10 PSS 41H-4V91, Rev C

Functional Specifications V91 Virtualization Server

Input Power
• 100-240 VAC, 50 to 60 Hz, auto ranging
Inrush Current
• 30 A power supply for 20 ms
Heat Dissipation
• 3067 BTU/hr (at 100 VAC)
• 2958 BTU/hr (at 200 VAC)
Power Consumption When equipped with two CPUs with 16 cores (100% utilized) and eight hard drives the
(Typical) measured typical power consumption is 250 watts
Cooling Hot swappable, redundant I/O and processor fans. Each redundant power supply
contains a fan. Temperature Specification can be extended up to 40°C (104°F) with the
Optional High Temperature DL380 Gen10 High Performance Fan Kit, Schneider Electric
Part Number RH103ES. This fan kit does increase the fan noise of the machine.
Regulatory
• U.S. and Canada
Compliance,
Electromagnetic Complies with FCC Part 15, Class B
Compatibility (EMC) • EU
Complies with the EU EMC Directive 2004/108/EC and the following Harmonized
Standards:
◦ EN 55022:2010 CLASS A
◦ EN 55024:2010
◦ EN 61000-3-2:2006 +A1:2009 +A2:2009
◦ EN 61000-3-3:2008
• Other Regulations
Complies with EU Energy Use Regulation (EC) No. 617/2013
Regulatory
• U.S. and Canada
Compliance, Product
Safety UL® and cUL Listed
• EU
Complies with the Low Voltage Directive 2006/95/EC and the following Harmonized
Standards:
◦ EN 60950:2006 +A1:2010 +A11:2009 +A12:2011
◦ EN62479:2010
• International
Complies with IEC 60950:2005 +A1:2009
RoHS Compliance Complies with EU RoHS Directive 2011/65/EU under the following Harmonized Standard:
EN 50581:2012

PSS 41H-4V91, Rev C 11

V91 Virtualization Server Environmental Specifications

Environmental Specifications
Operating Storage
Temperature 10° to 35°C (50° to 95°F) at sea level with an -30° to 60°C (-22° to 140°F)
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1000 ft) above sea level to a maximum Maximum rate of change is 20°C/hr (36°F/
of 3050 m (10,000 ft); no direct sustained hr)
sunlight.
Maximum rate of change is 10°C/hr (18°F/hr).
The upper limit might be limited by the type and
number of options installed.
10 to 40°C (50 to 104°F) with the Optional
RH103ES HP DL380 Gen10 High Performance
Fan
System performance might be reduced if
operating with a fan fault or above 30°C (86°F).
Relative 10% to 90% relative humidity (Rh), 28°C (82.4° 5% to 95% relative humidity (Rh), 38.7°C
Humidity F) maximum wet bulb temperature, (101.7°F) maximum wet bulb temperature,
noncondensing noncondensing
Maximum 0.26 G at 5 to 350 Hz in operational orientations 1.54 G rms at 10 Hz to 250 Hz in all
Vibration orientations
Shock Half sine shock in all operational orientations of Half sine shock on all six sides of 71 G
31 G +/-5% with a pulse duration of 2.6 ms +/-5% with a pulse duration of 2 ms
+/-10% +/-10%
Square wave shock on all six sides of 27
G with velocity change at 235 in/sec or
greater
Altitude 3050 m (10,000 ft). This value might be limited -16 to 9144 m (-50 ft to 30,000 ft)
by the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min)
Contamination Class G1 (Mild) as defined in ISA Standard S71.04
Location UL/UL-C listed as suitable for use in ordinary locations and meets ordinary safety standards
for fire and shock hazards.

12 PSS 41H-4V91, Rev C

Physical Specifications V91 Virtualization Server

Physical Specifications
Keyboard Chassis
Dimensions Height Maximum outside dimensions with bezel
and feet
• 35 mm (1.4 in)
Width Height
• 445 mm (17.5 in) • 87.3 mm (3.44 in) with bezel
Depth Width
• 150 mm (5.9 in) • 445 mm (17.5 in)
Depth
• 680 mm (26.75 in)
Weight 1.8 kg (4.0 lbs) Rack
• 23.6 kg (51.5 lbs) maximum
configuration

PSS 41H-4V91, Rev C 13

V91 Virtualization Server Ordering Information

Ordering Information
Part Number Description
V91 Virtualization Server for Foxboro DCS Virtual Machines
K0204AT Media kit required to use Centralized Virtualization Management (CVM) with MS
Server 2016. One kit required per V91
RH103FL HP T740 Quad Video Thin Client Single NIC
RH103FN HP T740 Quad Video Thin Client Dual NIC

Related Documents
Document Number Description
B0700HQ Model V91 Server Virtualization Host (HP DL380 Gen10) for Windows Server 2016
User’s Guide
PSS 41S-8HYPRVOV Hypervisor Technology — Microsoft Hyper-V Hypervisor
B0700HC Centralized Virtualization Management User's Guide for Windows Server 2016
B0700HD Virtualization for Windows Server 2016 User’s Guide
B0700CA Switch Configurator Application Software (SCAS) for the Control Network User's
Guide
PSS 41H-4THNCLNT Thin Clients
B0700WC Thin Client for Windows 10 User’s Guide
B0700VN Thin Client User’s Guide
PSS 41S-4MCAFEE McAfee Security Products
B0700WK McAfee ENS 10.7 and ePO 5.10 Installation Guide
B0700HS Veritas System Recovery 18

14 PSS 41H-4V91, Rev C

 WARNING: This product can
expose you to chemicals
including lead and lead
compounds, which are
known to the State of
California to cause cancer
and birth defects or other
reproductive harm. For more
information, go to
www.p65warnings.ca.gov/.

Schneider Electric Systems USA, Inc.

70 Mechanic Street
Foxboro, Massachusetts 02035–2040
United States of America

Global Customer Support: https://pasupport.schneider-electric.com

As standards, specifications, and design change from time to time,

please ask for confirmation of the information given in this publication.

© 2016–2022 Schneider Electric. All rights reserved.

PSS 41H-4V91, Rev C
Foxboro™ DCS
Thin Client

PSS 41H-4THNCLNT
Product Specification

April 2023

https://www.se.com
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its
subsidiaries referred to in this guide are the property of Schneider Electric SE or its
subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished
for informational use only. No part of this guide may be reproduced or transmitted in
any form or by any means (electronic, mechanical, photocopying, recording, or
otherwise), for any purpose, without the prior written permission of Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide
or its content, except for a non-exclusive and personal license to consult it on an "as is"
basis. Schneider Electric products and equipment should be installed, operated,
serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information
contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informational
content of this material or consequences arising out of or resulting from the use of the
information contained herein.
Overview of Thin Clients Thin Client

Overview of Thin Clients

Thin clients are physical hardware terminals with a compact form factor that are
capable of monitoring and responding to system events using the operating software
via a remote connection to a remote server.
Schneider Electric qualified the HP® t740 Windows 10, Quad Monitor single NIC
(RH103FL) and dual NIC (RH103FN) thin clients for use with the Foxboro DCS. A
QWERTY keyboard is shipped with this thin client.
Thin clients support these configuration options, which must be purchased separately:
• A mouse or trackball
• Up to four LCD monitors (part numbers P0928JJ, P0928JH, and RH103FR)
• USB speaker set (part number RH103DN)
• Up to four optional Annunciator Keyboards (part numbers P0924TT and
P0924WV)
A USB DVD drive is required to install the SeRdpConnectionManager DVD.
NOTE: For thin clients with QWERTY keyboards only, FoxPanels can be used as
an alternative to the Annunciator Keyboard.
Thin clients can access their Foxboro DCS software suite via network connections to
two different types of remote servers:
• A Model H90 server running Microsoft Windows Server 2016
• A virtual machine (VM) running on a Foxboro DCS V91 server virtualization host
Thin clients communicate with the Foxboro DCS through a physical or virtual Auxiliary
Communications Network (ACN) via a 1 GB copper Ethernet connection. The ACN is
a 1 GB network made up from managed Ethernet switches. Separately, Schneider
Electric provides an engineering process to establish the network connections.

Features
With a smaller footprint than a workstation, the t740 HP® thin clients are mounted local
to their remote user and used in traditional and virtualized Foxboro DCS systems.
Thin clients allow operators to perform similar tasks as a workstation and provide
ease of use and increased security as compared to physical stations.
The t740 thin clients can:
• Serve as human machine interface (HMI) stations with remote connections to
remote servers running Microsoft® Remote Desktop Services or SE RDP
Connection Manager
• Remotely, allow you to view and manage your Foxboro DCS software suite
• Communicate with Foxboro DCS servers through the Auxiliary Communications
Network (ACN) via a single or redundant NIC network connection
• Automatically shift between RDP servers if one has a detected failure

Configurations
Thin clients can be set up in one of these configurations:
• A specific thin client is restricted to connect to one particular virtual machine or
one physical Foxboro DCS server.
• A specific thin client is connected automatically to only one particular virtual
machine, or one physical Foxboro DCS server when the thin client boots up.

PSS 41H-4THNCLNT, Rev D 3

Thin Client Overview of Thin Clients

• A specific thin client has the option to connect to one of several different virtual
machines and/or physical Foxboro DCS servers for one at a time redundancy.
• A specific thin client has the option to connect to multiple virtual machines and/or
multiple physical Foxboro DCS servers simultaneously.
• A specific thin client is connected automatically to multiple virtual machines and/
or multiple physical Foxboro DCS servers when the thin client boots up.
• A specific thin client used within the Local Edition Control Core Services and Off-
Domain in the Enterprise Edition Control Core Services.
• Trellix ENS protection is installed as a self-managed solution.

Sizing
A single remote server running Microsoft Remote Desktop Services can support up to
30 FoxView simultaneous remote sessions and up to 10 Control HMI remote
sessions. Collectively, the V91 server virtualization host cannot support more than 60
Remote Desktop Protocol (RDP) sessions across the VMs due to bandwidth
constraints of the V91 physical Ethernet ports.
NOTE: The allowable number of RDP sessions depends on the number and types
of applications being run in the remote sessions.

4 PSS 41H-4THNCLNT, Rev D

Cybersecurity Thin Client

Cybersecurity
Thin clients can be configured to restrict connections to certain remote servers. After a
thin client establishes a connection with a remote server, the remote server’s
configuration determines what privileges to grant the user based on the user profile
logged into the remote server.
As an option, Trellix Endpoint Security (part number K0204BM) can provide additional
security enhancement features to help complement the security features already built
into our products. Trellix Endpoint Security (ENS) helps provide the advanced Threat
Prevention feature. The license entitlement for the first five years after purchase is
included when purchased for the t740 thin client. After five years, a renewal is
required.
For details about Trellix Endpoint Security, see Trellix Endpoint Protection Installation
and User’s Guide (B0700WR).

PSS 41H-4THNCLNT, Rev D 5

Thin Client Licensing

Licensing
These types of licensing apply when using thin clients with a Foxboro DCS:
• Software Suite License for Foxboro DCS
• Microsoft licensing

Foxboro DCS, Control Core Services, and Control Software

Licensing
• There is no specific Foxboro DCS, CCS, or CS hardware license for thin clients.
• There is no specific Foxboro DCS, CCS, or CS software license for thin clients.
• Existing Software Suite License for Foxboro DCS still applies with regard to
remote sessions. However, the license resides with the remote server not with
the remote client.
For example, the Foxboro DCS Software Suite license is needed for any Foxboro
DCS server (physical machine or virtual machine) as well as the thin clients
connected to these servers. Depending on the type of Foxboro DCS software is
installed or used on the server or thin client, the correct FX license part numbers
need to be used.

Microsoft Licensing
• Microsoft Windows Server permits remote access for two users without CALs
solely for administrative and technical product support purposes. These sessions
are in addition to the local desktop session which can run in conjunction with
these RDP sessions.
• There are additional Microsoft licenses needed if a thin client is being used for
additional connections to Microsoft Remote Desktop Services servers (formally
known as Terminal Services sessions). These licenses are available in
BuyAutomation in five license packs for both a “license per user” or “license per
device” model.

Remote Desktop Services (RDS) Client Access License

(CAL)
• Formally known as Terminal Services Client Access License (TS CAL).
• An RDS CAL is necessary for every additional remote session that connects to
and displays applications running on a Remote Desktop Services server.
• Foxboro DCS servers (V91, H90) do not ship with any RDS CALs included.
Therefore, you must determine the number of Users or Devices to be included in
your CAL license scheme.
• A server running Windows Server 2016 requires Windows Server 2016 RDS
CALS.

6 PSS 41H-4THNCLNT, Rev D

Licensing Thin Client

• Foxboro part number J0202AW provides five Remote Desktop Services 2016
Device CALs. Foxboro part number J0202AV provides five Remote Desktop
Services 2016 User CALs.
◦ RDS CALs per DEVICE license: One RDS CAL per device is required for
each device which accesses a remote desktop session. Devices can be thin
clients, computers or portable devices. Once a device has accessed the
remote desktop server, the RDS CAL per device license will be consumed by
that device and no other device can use that license. That device will continue
to be able to connect to the remote desktop server with any user logging on.
◦ RDS CALs per USER license: One RDS CAL per user is required for each
user that accesses a remote desktop session. RDS CALs per user licenses
are tied to the users logged on to the remote desktop server, regardless of the
device they are connecting from.
◦ RDS CALS must be installed and activated on a license server (usually an
RDS server).

Windows Server Client Access License (CAL)

• A CAL is necessary for every remote session that will connect to a Remote
Desktop Services server.
• A physical Foxboro DCS server (H90) ships with five CALs included.
• A Foxboro DCS V91 server virtualization host ships with a minimum of five CALs
included but can include up to 35 based on the particular V91 model code.
• Additional server CALs are available in BuyAutomation. Foxboro part number
J0202AT provides five Microsoft Windows Server 2016 Device CALs. Foxboro
part number J0202AU provides five Microsoft Windows Server 2016 User CALs.
Server CALs are a paper license only and do not require activation.

PSS 41H-4THNCLNT, Rev D 7

Thin Client Thin Client Hardware Description

Thin Client Hardware Description

Figure 1 - Base Configuration

A Front
B USB 3.1 Gen 1
C USB 3.1 Gen 2
D Headphone or audio jack
E USB-C 3.1 Gen 2
F Rear
G DisplayPort 1.2
H RJ45 GbE connector
I Cable lock slot
J PCI Express Expansion Slot — choice of
• Discrete graphics card
• Fiber Optic NIC interface
K USB 3.1 Gen 1
L USB 2.0

The HP Quad Monitor Series thin client contains these elements:

• AMD® processor
• Four integrated DisplayPort 1.2 connections with four Display Port to DVI-D
adapters for up to a total of four Displays Integrated
• 10/100/1000BaseT Ethernet port

8 PSS 41H-4THNCLNT, Rev D

Thin Client Hardware Description Thin Client

• Universal Serial Bus (USB) interface ports for:

◦ QWERTY keyboard
◦ Mouse (optional)
◦ Trackball (optional)
◦ Annunciator Keyboard (up to four optional)
◦ Audio speakers (optional)
◦ Touchscreens (optional)
◦ USB printers (optional)
• Onboard NIC card(s) for communication on the ACN, required for the
SeRdpConnectionManager DVD:
◦ Single NIC card for thin client (RH103FL) without redundancy
◦ Two NIC cards for thin client (RH103FN) with redundancy
Mounting Options
The HP thin clients can be either mounted vertically or horizontally on a plastic base
(supplied).
Networking Redundancy
Only available when a second NIC and redundant network configuration is
implemented
Reliability
The low cost of thin clients provides the option of having additional thin clients as
spares for quick, easy replacement, if needed.

PSS 41H-4THNCLNT, Rev D 9

Thin Client Functional Specifications

Functional Specifications
Operating System Windows 10 IoT Enterprise LTSC 2019
Processor Type AMD® processor
Processor AMD Ryzen™ V1756B with Radeon™ Vega 8 Graphics (3.25 GHz base clock, up to 3.6
GHz max boost clock, 2 MB cache, 4 cores)
Memory 32 GB DDR4-3200 SDRAM
Transfer rates up to 3200 MT/s
Internal Storage 128 GB Flash memory
Devices Served Video Displays (Up to 4)
• 23-inch LCD USB Touchscreen Monitor (P0928JJ)
• 23-inch LCD Monitor (P0928JH)
• 24-inch LCD Monitor (RH103FR)
Interfaces to External Devices
• USB
◦ Mouse or optional trackball
◦ QWERTY keyboard
◦ Annunciator keyboard (up to 4) (P0924TT and P0924WV)
◦ External speakers
◦ External DVD drive, required for SeRdpConnectionManager DVD. The RDP
Connection Manager is included with the dual NIC version. It can be purchased
separately for the single NIC with part number K0177DQ.
Internal Diagnostics Self-checking is performed at power-up.
Video Output Type
• Four DisplayPort 1.2 video port
Screen Presentation
• Refresh Rate
◦ Up to 85 Hz
• Colors
◦ Over 65,000(a)
• Resolution
◦ Widescreen (16:9) Aspect Ratio
– Up to 1920 x 1080 pixels for CCS and CS displays
Network Ethernet One Integrated Ethernet port (10/100/1000Base-T)
Interface
Communications
Network Interface Card One onboard NIC card standard with the RH103FL Thin Client
One onboard NIC card and a second plugin 10/100/1000 CATS NIC card for the
redundancy standard with the RH103FN Thin Client
DCS Auxiliary TYPE
Communications • TCP-IP
Network Interface

10 PSS 41H-4THNCLNT, Rev D

Functional Specifications Thin Client

Power Requirements Input Voltage

• 100 or 240 VAC (nominal), auto select
• 50 to 60 Hz Operating Line Frequency Range
Power Consumption(b)
• 90 W maximum
(a) Might be limited by specific software specifications.
(b) The actual power consumption at your location could vary and is dependent on many factors including but not
limited to software load on the thin client, attached peripherals, and environmental factors.

PSS 41H-4THNCLNT, Rev D 11

Thin Client Environmental Specifications

Environmental Specifications
Operating(a) Temperature
• 10 to 40°C (50 to 104°F)
Relative Humidity
• 10% to 90%, noncondensing
• 20% to 80%, condensing
Altitude
• 300 m to 3 km (1000 to 10,000 ft)
Storage Temperature
• -30 to +60°C (-22 to +140°F)
Relative Humidity
• 10% to 90%, noncondensing
Altitude
• 300 m to 3 km (1000 to 10,000 ft)
Accessibility Section 508 Accessibility. VPAT report available
Environmental Worldwide (ENERGY STAR®, EPEAT 2.0, RoHS2, ERP, TCO, CECP& SEPA, HP
Stewardship GSE, WEEE, Low Halogen, etc.)
Product Safety Worldwide (UL, CB, GS, CCC, BSMI, etc.)
Electromagnetic Worldwide (FCC/CISPR/EN/VCCI/ICES/AS/NZS/CNS/KCC) “Class B” EMI regulations
Compliance (EMC)
(a) Specifications are at sea level with no direct, sustained sunlight. Upper limit might be limited by the type and
number of options installed.

12 PSS 41H-4THNCLNT, Rev D

Physical Specifications Thin Client

Physical Specifications
Dimensions Vertical Orientation
• Height
◦ 210 mm 8.26 in)
• Width
◦ 50 mm (1.97 in)
• Depth
◦ 210 mm (8.26 in)
Mounting • Tabletop
• VESA 100
Weight 1323 g (2.92 lb)
Heat Dissipation(a) 90 W Power Supply
• @ 100 VAC (60 Hz)
◦ 57 BTU/hour, short idle
◦ 55 BTU/hour, long idle
◦ 5 BTU/hour, sleep
◦ 4 BTU/hour, off
• @ 115 VAC (60 Hz)
◦ 57 BTU/hour, short idle
◦ 55 BTU/hour, long idle
◦ 5 BTU/hour, sleep
◦ 5 BTU/hour, off
• @ 230 VAC (50 Hz)
◦ 57 BTU/hour, short idle
◦ 56 BTU/hour, long idle
◦ 5 BTU/hour, sleep
◦ 5 BTU/hour, off
(a) Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour.

PSS 41H-4THNCLNT, Rev D 13

Thin Client Related Documents

Related Documents
For more information regarding the thin client product offering, see these documents.
The latest revisions are available through at https://pasupport.schneider-electric.com.

Configuration Document
Supported Monitors Liquid Crystal Display (LCD) Monitors (PSS 41H-
4VDU)
V91 Server Virtualization Model M92 (P0928KK) Industrial Workstation with
Host Windows® 7 Professional Operating System (PSS
41H-4M92)
Model V91 Virtualization Host Server (HP DL380
Gen10) for Windows Server 2016 User’s Guide
(B0700HQ)
Virtualization Hypervisor Technology — Microsoft® Hyper-V™
Hypervisor (PSS 41S-8HYPRVOV)
Virtualization for Windows Server 2016 User’s
Guide (B0700HD)
Central Virtualization Centralized Virtualization Management for
Management Windows Server 2016 User’s Guide (B0700HC)
DCS Auxiliary Switch Configurator Application Software (SCAS)
Communications Network for the Control Network User's Guide (B0700CA)
(ACN) Configuration
Thin Client Hardware and Thin Client User's Guide (B0700VN)
Configuration
Thin Client with Windows 10 User’s Guide
(B0700WC)
Endpoint Protection Trellix Endpoint Protection Installation and User’s
Guide (B0700WR)
Trellix Endpoint Protection (PSS 41S-4Trellix)
Annunciator Keyboard USB-Based Annunciator Keyboard User's Guide
Support (B0700FT)

14 PSS 41H-4THNCLNT, Rev D

 WARNING: This product can
expose you to chemicals
including lead and lead
compounds, which are
known to the State of
California to cause cancer
and birth defects or other
reproductive harm. For more
information, go to
www.p65warnings.ca.gov/.

Schneider Electric Systems USA, Inc.

70 Mechanic Street
Foxboro, Massachusetts 02035–2040
United States of America

Global Customer Support: https://pasupport.se.com

As standards, specifications, and design change from time to time,

please ask for confirmation of the information given in this publication.

© 2020–2023 Schneider Electric. All rights reserved.

PSS 41H-4THNCLNT, Rev D
Foxboro™ DCS
Liquid Crystal Display (LCD) Monitors

PSS 41H-4VDU
Product Specification

November 2022

https://www.se.com
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its
subsidiaries referred to in this guide are the property of Schneider Electric SE or its
subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished
for informational use only. No part of this guide may be reproduced or transmitted in
any form or by any means (electronic, mechanical, photocopying, recording, or
otherwise), for any purpose, without the prior written permission of Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide
or its content, except for a non-exclusive and personal license to consult it on an "as is"
basis. Schneider Electric products and equipment should be installed, operated,
serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information
contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informational
content of this material or consequences arising out of or resulting from the use of the
information contained herein.
Overview Liquid Crystal Display (LCD) Monitors

Overview
The EcoStruxure Foxboro DCS Process Automation System has advanced
visualization software to help support plant operators in safely and securely achieving
maximum production. Modem high definition liquid crystal display monitors are
provided in the high definition aspect ratio.
Foxboro DCS systems offer 24-inch LCD monitors.

24-inch LCD Monitor

The 24-inch flat panel LCD monitor (RH103FR) has a picture matrix of 1920x1080
pixels which provides excellent images when driven at its standard resolution while
producing very good images at off-standard resolutions. The monitor is capable of
accepting digital DVI-D and DisplayPort and Analog VGA video signals. This monitor
can be used with workstations at its full 1920x1080 resolution and with workstations at
lesser resolutions.
As a tabletop unit, the monitor comes with a stand that has swivel, tilt, rotate and
height adjustments.

24-inch, Tabletop

While the previously offered 19-inch and 20-inch monitors had a standard 4:3 aspect
ratio, the 24-inch monitor has a standard 16:9 aspect ratio to support widescreen
resolutions, although it can support images at the 4:3 aspect ratio as well.
Workstations require the Foxboro DCS FoxView/FoxDraw application, version 10.2.4
or later and 1920x1080 high definition capability to support the 16:9 aspect ratio of the
24-inch monitor. This application is available for workstations, which support Foxboro
DCS Control Core Services software v9.0 and later. It supports displays in both the
4:3 and 16:9 aspect ratio. The application includes a conversion utility to convert
displays previously configured for the 4:3 aspect ratio to the 16:9 aspect ratio
supported by the 24-inch monitor.

PSS 41H-4VDU, Rev B 3

Liquid Crystal Display (LCD) Monitors Overview

Because the 24-inch monitors also support 4:3 aspect ratio displays, workstations
without both 1920 x1080 resolution and FoxView/FoxDraw 10.2.4 or later required for
16:9 displays can still use the 24-inch monitor to replace the previously offered 19-
inch or 20-inch monitors with 4:3 displays. While the 24-inch flat panel monitors work
best in their 1920x1080 standard resolution and newer workstations have this
capability, many older workstations (as noted in Flat Panel Monitor Software Setup for
UNIX and Windows Workstations (B0193PL)) do not. As a result, 24-inch monitors on
workstations with 4:3 aspect ratio displays must have their associated graphics cards
set to the specific resolutions listed in B0193PL.
NOTE: A single workstation cannot support a mix of 24-inch and the previously
offered 19-inch or 20-inch monitors.

Options for Displaying 4:3 Image on a 16:9 Monitor (Not to Scale)

4 PSS 41H-4VDU, Rev B

Overview Liquid Crystal Display (LCD) Monitors

European Certification
As symbolized by the CE logo on these monitors, they are in compliance with the
applicable European Union directives.

Video Screen Replacement

The placement of the video display in relation to the workstation can affect your choice
of video cables. In general, analog cables are suitable for use up to 30 m (100 ft)
whereas digital cables have a maximum limit of 4.8 m (16 ft), but there are exceptions.

Color Consistency
These monitors are sourced through a global supply chain that treats this category of
equipment as a commodity item. As such, minor color inconsistencies among
delivered monitors are to be expected. If the application requires color adjustments or
strict consistency of color presentation, contact Global Customer Support at https://
pasupport.schneider-electric.com (registration required) for assistance in selecting
monitors of the appropriate capability.

PSS 41H-4VDU, Rev B 5

Liquid Crystal Display (LCD) Monitors Functional Specifications

Functional Specifications
Display Characteristics Resolution (Pixels):
• Standard Resolution
1920 H x 1080 V (usually used at 60 Hz)
Viewable Size:
• 60.47 cm (23.8 in)
Recommended Operating Resolution:
• Standard Workstation Models(a) H90 or P90, H91 or P91, H92 or P92, P93
and P95:
1920x1080x60
Input Characteristics
NOTE: The recommended resolution is a function of the graphics card in the
system, the monitor that the system originally had and the preference of the
operator. Older systems do not have the capabilities to host modern
1920x1080 high definition resolutions.
Input Connectors:
• Analog:
15–pin VGA
• Digital:
DVI-D and DisplayPort
Sync Range:
• Horizontal (Analog/Digital):
31.5 KHz to 83 KHz
• Vertical:
50 Hz to 75 Hz
Brightness (Typical) 250 cd/m2
Power Requirements • Input Voltage:
Auto Select: 100 to 240 VAC
• Line Frequency:
50 and 60 Hz nominal
• Input Current:
0.90 - 0.50 A (with USB and Audio)
• Power:
15 W Typical
(a) Note that Foxboro DCS systems will only operate at 1280x1020 resolution.

6 PSS 41H-4VDU, Rev B

Environmental Specifications Liquid Crystal Display (LCD) Monitors

Environmental Specifications
Operating Storage
Temperature 5 to 35°C (41 to 95°F) -10 to +60°C (14 to 140°F)
Humidity 20 to 80% (non condensing) 10 to 85% (non condensing)
Altitude 0 to 5000 m (0 to 16404 ft) 0 to 12192 m (0 to 40,000 ft)
Location UL/UL-C listed as suitable for use in ordinary locations and is designed to help meet ordinary
safety standards for fire and shock hazards.
Contamination Class G1 (Mild) as defined in ISA Standard S71.04

Physical Specifications
Weight • Display with Swivel Stand:
6.1 kg (13.4 lb)
• Display without Swivel Stand:
3.6 kg (7.9 lb)
Mounting Desktop: 100 x 100 mm VESA mounting capability
Swivel Stand Swivel Range
• Side to Side:
±170° from center
• Up to Down:
+35°, -5° from center
Viewing Range ±89° from center
Dimensions Display
• Width: 537.7 mm (21.2 in)
• Height: 319.1 mm (12.6 in)
• Depth: 45.6 mm (1.8 in)
Display with Swivel Stand
• Width: 537.7 mm (21.2 in)
• Height: 336.6 - 486.6 mm (13.3 - 19.2 in)
• Depth: 250 mm (9.8 in)

PSS 41H-4VDU, Rev B 7

Liquid Crystal Display (LCD) Monitors Dimensionals Nominal

Dimensionals Nominal

Regulatory Compliance
Safety
• US, Canada
Certifications
UL® / cUL
• EU
Complies with the Low Voltage Directive 2006/95/EC and the following Harmonized
Standards:
◦ EN 60950-1:2006+A11:2009+A1:2010+A12:2011
EMC
• USA, Canada
Complies with FCC Part 15, Class B
• EU
Complies with the EU EMC Directive 2004/108/EC and the following Harmonized
Standards:
◦ EN 55022:2010 Class B
◦ EN 55024:2010
◦ EN 61000-3-2:2006+A1:2009+A2:2009
◦ EN 61000-3-3:2008
• Other Regulations
◦ Complies with EU ErP Directive 2009/125/EC and Harmonized Standard
EN62301:2005
◦ Complies with EU RoHS Directive 2011/65/EU

8 PSS 41H-4VDU, Rev B

 WARNING: This product can
expose you to chemicals
including lead and lead
compounds, which are
known to the State of
California to cause cancer
and birth defects or other
reproductive harm. For more
information, go to
www.p65warnings.ca.gov/.

Schneider Electric Systems USA, Inc.

70 Mechanic Street
Foxboro, Massachusetts 02035–2040
United States of America

Global Customer Support: https://pasupport.schneider-electric.com

As standards, specifications, and design change from time to time,

please ask for confirmation of the information given in this publication.

© 2014–2022 Schneider Electric. All rights reserved.

PSS 41H-4VDU, Rev B
Foxboro™ DCS
The Foxboro DCS Control Network Ethernet
Equipment

PSS 41H-7NWEQUIP

Product Specification

November 2023

https://www.se.com
Legal Information
The information provided in this document contains general descriptions, technical
characteristics and/or recommendations related to products/solutions.
This document is not intended as a substitute for a detailed study or operational and
site-specific development or schematic plan. It is not to be used for determining
suitability or reliability of the products/solutions for specific user applications. It is the
duty of any such user to perform or have any professional expert of its choice
(integrator, specifier or the like) perform the appropriate and comprehensive risk
analysis, evaluation and testing of the products/solutions with respect to the relevant
specific application or use thereof.
The Schneider Electric brand and any trademarks of Schneider Electric SE and its
subsidiaries referred to in this document are the property of Schneider Electric SE or
its subsidiaries. All other brands may be trademarks of their respective owner.
This document and its content are protected under applicable copyright laws and
provided for informative use only. No part of this document may be reproduced or
transmitted in any form or by any means (electronic, mechanical, photocopying,
recording, or otherwise), for any purpose, without the prior written permission of
Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the
document or its content, except for a non-exclusive and personal license to consult it
on an "as is" basis.
Schneider Electric reserves the right to make changes or updates with respect to or in
the content of this document or the format thereof, at any time without notice.
To the extent permitted by applicable law, no responsibility or liability is
assumed by Schneider Electric and its subsidiaries for any errors or omissions
in the informational content of this document, as well as any non-intended use
or misuse of the content thereof.
Overview The Foxboro DCS Control Network Ethernet Equipment

Overview
The EcoStruxure Foxboro DCS Control Network uses Foxboro qualified Ethernet
equipment allowing you to configure your system to meet your functional,
performance, and plant requirements. With our switches, you can interconnect system
components (controllers, workstations, servers) effectively to help minimize the
quantities and lengths of interconnectivity cabling.
The Foxboro DCS Control Network equipment described in this document has been
tested and qualified for use with the Foxboro DCS. The qualified Ethernet switches
offered are listed in the table in Qualified Ethernet Switches, page 6.

PSS 41H-7NWEQUIP, Rev H 3

The Foxboro DCS Control Network Ethernet Equipment Features

Features
• System scalability by interconnecting Ethernet switches, each having eight ports
or more in various increments.
• Modular uplinks to high-speed backbones using:
◦ 1000Base-T
◦ 1000Base-SX
◦ 1000Base-LX
◦ 1000Base-LX/LH
◦ 1000Base-BX
◦ 1000Base-TX
◦ 1000Base-ZX standards
◦ 10GbBase-LR
◦ 10GbBase-LRM
◦ 10GbBase-SR
◦ 10GbBase-ZR
• System Management software for monitoring the health of the control system and
managing the equipment within the system.
• Compatible with the optional Network Monitoring software. For more information,
see ExtremeCloud IQ (XIQ) - Site Engine (PSS 41S-2XIQ-SE).
• Configure tasks through a local console port Command Line Interface (CLI) and
monitor through any SNMP/RMON based management application.
• Ethernet switches are European Union (EU) Low Voltage and EMC directives
safety certified “CE” logo marked on the product.
The X440-G2 10 Gigabit model switches require a license to upgrade the SFP+ 1
GbE ports to 10 GbE:
• (J0202DN) Dual 10 GbE upgrade license enables 10 GbE on the non-stack
capable ports.
• (J0202DP) Quad 10 GbE upgrade license enables 10 GbE on all four uplink
Ports.

Table 1 - Licensing for (10 Gb) ISL Ports

Switch P/N Switch Type License required Supported Ports

for 10 GbE
support
RH102AD X440-G2-24x- J0202DN/ Ports 25 - 28
10GE4 J0202DP (as
required)
RH102AY X440-G2-24t- J0202DN/ Ports 25 - 28
10GE4 J0202DP (as
required)
RH102AQ X440-G2-12t- J0202DN/ Ports 13 - 16
10GE4 J0202DP (as
required)
RH102AB X460-G2-24X- Not Required Ports 29 -32
10GE4
RH102AC X460-G2-48X- Not Required Ports 49 -52
10GE4

4 PSS 41H-7NWEQUIP, Rev H

Features The Foxboro DCS Control Network Ethernet Equipment

Table 1 - Licensing for (10 Gb) ISL Ports (Continued)

Switch P/N Switch Type License required Supported Ports

for 10 GbE
support
RH102BF 5520-Series (24x) Not Required Any two ports or
QSFP ports
RH102BF/ 5520-Series Not Required QSFP ports
RH102BH (48SE/24t)
RH102BM/ 5420-Series (24t/ Not Required SFP+ ports
RH102BN 24s)
GRS1030 8T8Z/ GREYHOUND Not supported N/A
16T9

Table 2 - VRRP Router Required License (Advanced Edge License)

Switch Type P/N Port Utilization for Advanced Edge License

VRRP routing
RH102AB All SFP ports N/A
RH102AC All SFP ports N/A
RH102AD All SFP ports J0202AN
RH102AQ All ports (Copper/SFP) J0202AN
RH102AY All ports (Copper/SFP) J0202AN
RH102AM SFP ports 25-28 J0202AN
RH102AN SFP ports 25-28 J0202AN
RH102AP SFP ports 25-28 J0202AN
RH102BF All SFP ports N/A
RH102BG All SFP ports N/A
RH102BH All ports (Copper) SFP N/A
RH102BM All SFP ports N/A
RH102BN All SFP ports N/A
GRS1030 8T8Z/16T9 Not supported N/A

PSS 41H-7NWEQUIP, Rev H 5

The Foxboro DCS Control Network Ethernet Equipment Qualified Ethernet Switches

Qualified Ethernet Switches

Root and Distribution: 5520-Series
Switch Reference
24-Gigabit SFP+ Managed Switch RH102BF, page 9
24-Gigabit 10/100/1000Base-Tx Managed Switch RH102BH, page 13
350 W AC Power Supply (requires two units for redundant power) RH102BJ, page 15
48-Gigabit SFP 2 QSFP Managed Switch RH102BG, page 17
Ethernet Managed Switch QSFP to SFP+ Adapter RH102BL, page 20

Edge: 5420-Series

Switch Reference
24-Gigabit 4 SFP Managed Switch RH102BN, page 21
24-Gigabit 10/100/1000Base-Tx Managed Switch RH102BM, page 21
150 W AC Power Supply (redundant power only) RH102BP, page 22

Switches: 5520 Power Supplies

Switch Reference
Auto-Ranging Power Supply RH102BJ, page 24 (for
RH102BF/BG/BH)
Redundant Power Supply RH102BJ, page 25 (for
RH102BF/BG/BH)

Edge: Industrial GREYHOUND

Switch Reference
Fast Ethernet Media Module GRM20, page 26
Industrial Managed Fast, Gigabit Managed Switch GRS-1030 16T9, page
27
Industrial Managed Fast, Gigabit Managed Switch GRS-1030 8T8Z, page
27

X-Series X460-G2
Switch Reference
24-Gigabit (SFP) Managed Switch RH102AB, page 29
300 W AC Power Supply (X460) RH102AE, page 32

6 PSS 41H-7NWEQUIP, Rev H

Qualified Ethernet Switches The Foxboro DCS Control Network Ethernet Equipment

Switch Reference
48-Gigabit (SFP) Managed Switch RH102AC, page 35
Fan Module RH102AF, page 39

X-Series: X440-G2
Switch Reference
12-Port Copper/8-Port Fiber X440-G2 Managed Switch RH102AP, page 40
12-Port Copper X440-G2 Managed Switch RH102AQ, page 43
24-Gigabit (SFP) Managed Switch RH102AD, page 46
24-Port Copper X440-G2 Managed Switch RH102AM, page 49
RH102AY, page 52
24-Port Fiber X440-G2 Managed Switch RH102AN, page 55

Redundant X-Series Power Supplies

Switch Reference
Redundant Power Supply Chassis RH102AV, page 59
Redundant Power Supply (RPS) RH102AW, page 60
Redundant Power Supply (RPS), Rev. B RH102AX, page 61

GBICs: Non-Industrial
Switch Reference
2 km (1.24 mi) MGBIC module LC (LX/LH) 1300 N-m 1000Base-LX P0972YQ
275 m (902 ft) MGBIC module LC (SX) 850 N-m 1000Base-SX RH102AG
10 km (6.2 mi) MGBIC module LC (LX) 1310 N-m 1000Base-LX, SMF RH102AH
80 km (49.7 mi) MGBIC module LC (ZX) 1550 N-m 1000Base-ZX RH102AJ
100 m (330 ft) RJ-45 MGBIC Uplink module (TX) 10/100/1000Base-T RH102AL
100Base-FX 2 km (1.24 mi) MGBIC device module LC (1310 N-m) RH102BK
10 Gb SR SFP+ module 300 m (984 ft) MMF 850 N-m RH102BQ
10 Gb LR SFP+ module 10 km (6.2 mi) SMF RH102BR
10 Gb LRM SFP+ module 220 m (721 ft) MMF, 300 m (984 ft) SMF RH102BS
10 Gb ZR SFP+ module 80 km (49.7 mi) SMF RH102BT
Bi-directional Uplink 10K MGBIC module LC LX (1310 N-m) P0973JB
Bi-directional Downlink 10K MGBIC module LC LX (1490 N-m) P0973JC
Bi-directional MGBIC Kit containing both downlink and uplink 10K MGBIC P0973JD
Bi-directional Uplink 40K MGBIC module BX (1310 N-m) P0973KM

PSS 41H-7NWEQUIP, Rev H 7

The Foxboro DCS Control Network Ethernet Equipment Qualified Ethernet Switches

Switch Reference
Bi-directional Downlink 40K MGBIC module BX (1490 N-m) P0973KN
Bi-directional MGBIC Kit containing both downlink and uplink 40K MGBIC P0973KP
Bi-directional Uplink 120K MGBIC module BX (1490 N-m) P0973KQ
Bi-directional Downlink 120K MGBIC module BX (1590 N-m) P0973KR
Bi-directional MGBIC Kit containing both downlink and uplink 120K MGBIC P0973KS

GBICs: Industrial (GRS-1030 GREYHOUND)

100Base-FX 2 km (1.24 mi) Transceiver device module LC (1310 N-m) RH102HA

1000Base-LX, 550 m (1804 ft) 50/125 μm MMF, 550 m (1804 ft) 62.5/125 μm MMF, 10 km RH102HB
(6.2 mi) 9/125 μm SMF
275 m (902 ft) MGBIC module LC (SX) 850 N-m 1000Base-SX RH102HC
80 km (49.7 mi) Transceiver module LC (ZX) 1550 N-m RH102HD
1 Gb Bi-directional Transceiver Kit containing both downlink and uplink 10K MGBIC RH102HF
1 Gb Bi-directional Transceiver downlink and uplink 40K MGBIC RH102HG
1 Gb Bi-directional Transceiver downlink and uplink 40K MGBIC RH102HH
1 Gb Bi-directional Transceiver downlink and uplink 120K MGBIC RH102HJ
1 Gb Bi-directional Transceiver downlink and uplink 120K MGBIC RH102HK

8 PSS 41H-7NWEQUIP, Rev H

The Foxboro DCS Control Network Ethernet Equipment X-Series X440-G2

X-Series X440-G2
RH102AP 12-Port Copper/8-Port Fiber X440-G2 Managed
Switch
RH102AP (X440-G2 managed switch) provides 12 Tri-speed 10/100/1000Base-T
ports with RJ-45 connectors, eight (8) 100Base-FX ports with LC connectors, and four
(4) (SFP) ports. The four SFP ports can be populated with 1000Base-X or 100/
1000Base-TX (RH102AL) MGBIC connector modules.
The switch allows high performance, managed layer-2 Ethernet switching in small- to-
medium-sized network applications, as well as high performance direct end-station
connectivity.

Figure 13 - 12-Port Copper/8-Port Fiber X440-G2 Managed Switch (RH102AP)

Features
The 12-Port Copper/8-Port Fiber X440-G2 managed switch features:
• 8 ports of 100Base-FX.
• 12 ports of Tri-speed 10/100/1000Base-T.
• Four 1000Base-X uplink Gigabit (SFP) ports.
• RJ-45 Category 5 connectors on switch copper ports.
• LC connectors on switch fiber ports.
• Full-duplex operation.
• Configuration tasks through a local console port and monitoring through any
SNMP/RMON based management application.
• Port mirroring technology and diagnostics that allow local network traffic to be
redirected to an external probe for detailed analysis.
• Compliance with industry standards, including IEEE 802.3u Fast Ethernet and
802.1w Rapid Spanning Tree Protocol (RSTP).
• Optional external redundant power supply.
• Shelf, desk, or 19-inch rack mounting.
All X440-G2 switches ship with fixed fans and power supplies.

CPU/Memory
• 64-bit MIPS Processor, 1 GHz clock, single core
• 1 GB ECC DDR3 DRAM
• 4 GB eMMC Flash
• 1.5 MB packet buffer

40 PSS 41H-7NWEQUIP, Rev H

X-Series X440-G2 The Foxboro DCS Control Network Ethernet Equipment

Uplink/Switch Interfaces
The Mini-GBIC SFP Connector Modules for Each Switch Type table, page 64 lists the
MGBIC modules that can be added to the X440-G2, 12 copper and eight (8) fiber Port
Managed Switch (RH102AP) switch. The MGBIC modules are added to specific SFP
ports to provide connectivity for ISL ports.

Power Supply
The RH102AP switch power is provided by an internal power supply that requires
separately fused 15-amp power circuits within 182 cm (6 ft) of the power supply.

Optional Redundant Power Supply

For more information, see RH102AX (Redundant Power Supply), page 61.

Installation Guidelines

NOTICE
POTENTIAL EQUIPMENT DAMAGE
These guidelines must be observed when an installation location is selected for this
switch. If the guidelines are not followed, unsatisfactory network performance can
result.
• To provide for proper ventilation and help prevent overheating, leave a minimum
clearance space of 5.1 cm (2.0 in) at the top, bottom, left, right, and rear of the
switch. Do not connect the switch to the AC power source until instructed to do
so later in the installation process.
• During operation, ambient temperature at the installation site must be
maintained between 0° and 60°C (32° to 140°F). Temperature changes must be
maintained within 10°C (18°F) per hour.
• Refer to installation document for details.
Failure to follow these instructions can result in equipment damage.

PSS 41H-7NWEQUIP, Rev H 41

The Foxboro DCS Control Network Ethernet Equipment X-Series X440-G2

Functional Specifications
Ethernet Standards Supported • IEEE 802.1q VLAN support
• IEEE 802.1d MAC Bridging (including STP) IEEE 802.1p
• Quality of Service (QoS, Priority) IEEE 802.1w Rapid Spanning Tree
(RSTP) IEEE 802.3 including:
◦ Fast Ethernet: IEEE 802.3u, 100Base-T (Copper)
◦ Gigabit Ethernet: IEEE 802.3z, 1000Base-X (Fiber)
◦ Gigabit Ethernet: IEEE 802.3ab, 1000Base-T (Copper)
Power • Internal:
AC Input power (auto-sensing)
100 VAC to 240 VAC, 50 to 60 Hz +/- 5%
• External:
Supports connection for redundant power supply
• Heat Dissipation:
159 Btu/Hr
• Power Consumption:
32 Watts
• Maximum Power Consumption:
47 Watts

Environmental Specifications
Operating Storage
Temperature 0° to 60°C (32° to 140°F) -40° to +70°C (-40° to +158°F)
Relative Humidity 10 to 95% (non-condensing) 10 to 95% (non-condensing).
Altitude 0 to 3,000 meters (9,850 feet)

Physical Specifications
Mounting Desk or Enclosure: 48.3 cm (19 in) equipment rack, 1U high
Dimensions (Nominal) • Height: 4.4 cm (1.7 in)
• Width: 30.5 cm (12.01 in)
• Depth: 26.1 cm (10.28 in)
Weight (Approximate) 2.95 kg (6.5 lb)
Cable Connectors • Uplink Ports: RJ-45 copper or LC fiber
Vibration • Vibration: IEC 60068-2-64, IEC 60068-2-6
• Shock: IEC 60068-2-27
• Drop: ETSI/EN 300 019 2-2

42 PSS 41H-7NWEQUIP, Rev H

X-Series X440-G2 The Foxboro DCS Control Network Ethernet Equipment

Regulatory and Safety

Regulatory Compliance, Product UL Listed, CSA Certified, European Low Voltage Directive 2014/35/EU, CB
Safety Scheme, complies with FCC 21 CFR 1030.10, US FDA Approval, AS/NZS
RCM Certified
Regulatory Compliance, European EMC Directive 2014/30/EU
Electromagnetic Compatibility
(EMC) Complies with FCC Part 15, Subpart B, Class A
ICES-003: 2012, Class A
Regulatory Compliance, 2011/65/EU RoHS Directive
Environmental

RH102AQ 12-Port Copper X440-G2 Managed Switch

RH102AQ provides 12 Tri-speed 10/100/1000Base-T ports with RJ-45 connectors,
and four (SFP+) ports, with a total of 16 active ports. The four (SFP+) ports can be
populated with 1000Base-X or 100/1000Base-TX (RH102AL) MGBIC connector
modules.
The switch allows high performance, managed layer-2 Ethernet switching in small- to-
medium-sized network applications, as well as high performance direct end-station
connectivity.

Figure 14 - 12-Port Copper X440-G2 Managed Switch (RH102AQ)

Features
The 12-Port Copper X440-G2 managed switch features are:
• 12 ports of Tri-speed 10/100/1000Base-T.
• Four 1000Base-X uplink Gigabit (SFP) ports configurable as 1G/10G uplink ports.
The SFP+ ports can accommodate 1G/10GBASE-X GBICs only.
• RJ-45 Category 5 connectors on switch copper ports.
• Full-duplex operation.
• Configuration tasks through a local console port and monitoring through any
SNMP/RMON based management application.
• Port mirroring technology and diagnostics that allow local network traffic to be
redirected to an external probe for detailed analysis.
• Compliance with industry standards, including IEEE 802.3.ae 10 GbE, IEEE
802.3u Fast Ethernet and 802.1w Rapid Spanning Tree Protocol (RSTP).
• Optional external (power brick style) redundant power supply.
• Shelf, desk, or 19-inch rack mounting.
All X440-G2 switches ship with fixed fans and power supplies.

PSS 41H-7NWEQUIP, Rev H 43

The Foxboro DCS Control Network Ethernet Equipment X-Series X440-G2

CPU/Memory
• 64-bit MIPS Processor, 1 GHz clock, single core
• 1 GB ECC DDR3 DRAM
• 4 GB eMMC Flash
• 1.5 MB packet buffer

Uplink/Switch Interfaces
The Mini-GBIC SFP Connector Modules for Each Switch Type table, page 64 lists the
MGBIC modules that can be added to the X440-G2, 12 copper Port Managed Switch
(RH102AQ) switch. The MGBIC modules are added to specific SFP ports to provide
connectivity for ISL ports.

Power Supply
The RH102AQ switch power is provided by an internal power supply that requires
separately fused 15-amp power circuits within 182 cm (6 ft) of the power supply.

Optional Redundant Power Supply

For more information, see RH102AW (Redundant Power Supply) for RH102AQ, page
60.

Installation Guidelines

NOTICE
POTENTIAL EQUIPMENT DAMAGE
These guidelines must be observed when an installation location is selected for this
switch. If the guidelines are not followed, unsatisfactory network performance can
result.
• To provide for proper ventilation and help prevent overheating, leave a minimum
clearance space of 5.1 cm (2.0 in) at the top, bottom, left, right, and rear of the
switch. Do not connect the switch to the AC power source until instructed to do
so later in the installation process.
• During operation, ambient temperature at the installation site must be
maintained between 0° and 50°C (32° to 122°F). Temperature changes must be
maintained within 10°C (18°F) per hour.
• Refer to installation document for details.
Failure to follow these instructions can result in equipment damage.

44 PSS 41H-7NWEQUIP, Rev H

X-Series X440-G2 The Foxboro DCS Control Network Ethernet Equipment

Functional Specifications
Ethernet Standards Supported • IEEE 802.1q VLAN support
• IEEE 802.1d MAC Bridging (including STP) IEEE 802.1p
• Quality of Service (QoS, Priority) IEEE 802.1w Rapid Spanning Tree
(RSTP) IEEE 802.3 including:
◦ Fast Ethernet: IEEE 802.3u, 100Base-T (Copper)
◦ Gigabit Ethernet: IEEE 802.3z, 1000Base-X (Fiber)
◦ Gigabit Ethernet: IEEE 802.3ab, 1000Base-T (Copper)
Power • Internal:
AC Input power (auto-sensing)
100 VAC to 240 VAC, 50 to 60 Hz +/- 5%
• External:
Supports connection for redundant power supply
• Heat Dissipation:
109 Btu/Hr
• Power Consumption:
15 Watts
• Maximum Power Consumption:
32 Watts

Environmental Specifications
Operating Storage
Temperature 0° to 50°C (32° to 122°F) -40° to +70°C (-40° to +158°F)
Relative Humidity 10 to 95% (non-condensing) 10 to 95% (non-condensing).
Altitude 0 to 3,000 meters (9,850 feet)

Physical Specifications
Mounting Desk or Enclosure: 48.3 cm (19 in) equipment rack, 1U high
Dimensions (Nominal) • Height: 4.4 cm (1.7 in)
• Width: 30.5 cm (12.01 in)
• Depth: 26.1 cm (10.28 in)
Weight (Approximate) 2.64 kg (5.82 lb)
Cable Connectors • Uplink Ports: RJ-45 copper or LC fiber
Vibration • Vibration: IEC 60068-2-64, IEC 60068-2-6
• Shock: IEC 60068-2-27
• Drop: ETSI/EN 300 019 2-2

PSS 41H-7NWEQUIP, Rev H 45

The Foxboro DCS Control Network Ethernet Equipment X-Series X440-G2

Regulatory and Safety

Regulatory Compliance, Product UL Listed, CSA Certified, European Low Voltage Directive 2014/35/EU, CB
Safety Scheme, complies with FCC 21 CFR 1030.10, US FDA Approval, AS/NZS
RCM Certified
Regulatory Compliance, European EMC Directive 2014/30/EU
Electromagnetic Compatibility
(EMC) Complies with FCC Part 15, Subpart B, Class A
ICES-003: 2012, Class A
Regulatory Compliance, 2011/65/EU RoHS Directive
Environmental

RH102AD 24-Gigabit (SFP) X440-G2 Managed Switch

RH102AD (X440-G2 managed switch) provides 24 modular 1000Base-X (SFP) ports,
four (4) of which are combo ports (copper or SFP), with a total of 24 active ports. The
24 SFP ports can be populated with 1000Base-X, 100Base-FX (P0973JE), or 100/
1000Base-TX (RH102AL) MGBIC connector modules.
The switch allows high performance, managed layer-2 Ethernet switching in small- to-
medium-sized network applications, as well as high performance direct end-station
connectivity.

Figure 15 - 24-Gigabit (SFP) X440-G2 Managed Switch (RH102AD)

Features
The 24-Gigabit (SFP) X440-G2 managed switch features:
• 24-port 1000Base-X 1 Gb SFP ports (the SFP ports can be configured as
100Base-FX or 100Base-Tx with the appropriate GBIC transceiver).
• Four (4) combo ports (SFP or Copper RJ-45) ports configurable as 1G/10G uplink
ports, SFP+ ports accommodate 1G/10GBase-X GBICs only.
• Full-duplex operation.
• Configuration tasks through a local console port and monitoring through any
SNMP/RMON based management application.
• Port mirroring technology and diagnostics that allow local network traffic to be
redirected to an external probe for detailed analysis.
• Compliance with industry standards, including IEEE 802.3.ae 10 GbE, IEEE
802.3u Fast Ethernet and 802.1w Rapid Spanning Tree Protocol (RSTP).
• Optional external redundant power supply.
• Shelf, desk, or 19-inch rack mounting.
All X440-G2 switches ship with fixed fans and power supplies.

46 PSS 41H-7NWEQUIP, Rev H

X-Series X440-G2 The Foxboro DCS Control Network Ethernet Equipment

CPU/Memory
• 64-bit MIPS Processor, 1 GHz clock, single core
• 1 GB ECC DDR3 DRAM
• 4 GB eMMC Flash
• 1.5 MB packet buffer

Uplink/Switch Interfaces
The Mini-GBIC SFP Connector Modules for Each Switch Type table, page 64 lists the
MGBIC modules that can be added to the X440-G2 24 port (SFP) Port Managed
Switch (RH102AD) switch. The MGBIC modules are added to specific SFP ports to
provide connectivity for ISL or device ports.

Power Supply
The RH102AD switch power is provided by an internal power supply that requires
separately fused 15-amp power circuits within 182 cm (6 ft) of the power supply.

Optional Redundant Power Supply

For more information, see RH102AX (Redundant Power Supply), page 61.

Installation Guidelines

NOTICE
POTENTIAL EQUIPMENT DAMAGE
These guidelines must be observed when an installation location is selected for this
switch. If the guidelines are not followed, unsatisfactory network performance can
result.
• To provide for proper ventilation and help prevent overheating, leave a minimum
clearance space of 5.1 cm (2.0 in) at the top, bottom, left, right, and rear of the
switch. Do not connect the switch to the AC power source until instructed to do
so later in the installation process.
• During operation, ambient temperature at the installation site must be
maintained between 0° and 50°C (32° to 122°F). Temperature changes must be
maintained within 10°C (18°F) per hour.
• Refer to installation document for details.
Failure to follow these instructions can result in equipment damage.

PSS 41H-7NWEQUIP, Rev H 47

The Foxboro DCS Control Network Ethernet Equipment X-Series X440-G2

Functional Specifications
Ethernet Standards Supported • IEEE 802.1q VLAN support
• IEEE 802.1d MAC Bridging (including STP)
• Quality of Service (QoS, Priority) IEEE 802.1w Rapid Spanning Tree
(RSTP) IEEE 802.3 including:
◦ Fast Ethernet: IEEE 802.3u, 100Base-T (Copper)
◦ Gigabit Ethernet: IEEE 802.3z, 1000Base-X (Fiber)
◦ Gigabit Ethernet: IEEE 802.3ab, 1000Base-T (Copper)
Power • Internal:
AC Input power (auto-sensing)
100 VAC to 240 VAC, 50 to 60 Hz +/- 5%
• External:
Supports connection for redundant power supply
• Heat Dissipation:
172 Btu/Hr
• Power Consumption:
26 Watts
• Maximum Power Consumption:
51 Watts

Environmental Specifications
Operating Storage
Temperature 0° to 50°C (32° to 122°F) -40° to +70°C (-40° to +158°F)
Relative Humidity 10 to 95% (non-condensing) 10 to 95% (non-condensing).
Altitude 0 to 3,000 meters (9,850 feet)

Physical Specifications
Mounting Desk or Enclosure: 48.3 cm (19 in) equipment rack, 1U high
Dimensions (Nominal) • Height: 4.4 cm (1.7 in)
• Width: 44.1 cm (17.36 in)
• Depth: 25.4 cm (10.1 in)
Weight (Approximate) 3.73 kg (8.22 lb)
Cable Connectors • Uplink Ports: RJ-45 copper or LC fiber
Vibration • Vibration: IEC 60068-2-64, IEC 60068-2-6
• Shock: IEC 60068-2-27
• Drop: ETSI/EN 300 019 2-2

48 PSS 41H-7NWEQUIP, Rev H

X-Series X440-G2 The Foxboro DCS Control Network Ethernet Equipment

Regulatory and Safety

Regulatory Compliance, Product UL Listed, CSA Certified, European Low Voltage Directive 2014/35/EU, CB
Safety Scheme, complies with FCC 21 CFR 1030.10, US FDA Approval, AS/NZS
RCM Certified
Regulatory Compliance, European EMC Directive 2014/30/EU
Electromagnetic Compatibility
(EMC) Complies with FCC Part 15, Subpart B, Class A
ICES-003: 2012, Class A
Regulatory Compliance, 2011/65/EU RoHS Directive
Environmental

RH102AM 24-Port Copper X440-G2 Managed Switch

RH102AM (X440-G2 managed switch) provides 24 Tri-speed 10/100/1000Base-T
ports with RJ-45 connectors, and four SFP 1000Base-X uplink (ISL) Gigabit ports
(located on the back of the unit), with a total of 28 active ports. The four (SFP) ports
can be populated with 1000Base-X, 100Base-FX (P0973JE) or 100/1000Base-TX
(RH102AL) MGBIC connector modules.
The switch allows high performance, managed layer-2 Ethernet switching in small- to-
medium sized network applications, as well as high performance direct end-station
connectivity.

Figure 16 - 24-Port Copper X440-G2 Managed Switch (RH102AM)

Features
The 24-Port Copper X440-G2 managed switch features:
• 24 ports of Tri-speed 10/100/1000Base-T.
• Four 1000Base-X uplink Gigabit (SFP) ports (the SFP ports are located on the
back of the unit).
• RJ-45 Category 5 connectors on switch copper ports.
• Full-duplex operation.
• Configuration tasks through a local console port and monitoring through any
SNMP/RMON based management application.
• Port mirroring technology and diagnostics that allow local network traffic to be
redirected to an external probe for detailed analysis.
• Compliance with industry standards, including IEEE 802.3u Fast Ethernet and
802.1w Rapid Spanning Tree Protocol (RSTP).
• Optional external redundant power supply.
• Shelf, desk, or 19-inch rack mounting.
All X440-G2 switches ship with fixed fans and power supplies.

PSS 41H-7NWEQUIP, Rev H 49

Redundant Power Supplies The Foxboro DCS Control Network Ethernet Equipment

Redundant Power Supplies

RH102AV Redundant Power Supply Chassis
Figure 19 - Redundant Power Supply Chassis (RH102AV) and Power Supply (RH102AX)

Physical Specifications
Mounting Desk or Enclosure: 48.3 cm (19 in) equipment rack, 2U high
Dimensions (Nominal) • Height: 4.5 cm (1.77 in)
• Width: 15.42 cm (6.07 in)
• Depth: 34.0 cm (13.39 in)
Weight (Approximate) 2.1 kg (4.63 lb.)
Power Supply Slots Three slots for redundant power supplies (RH102AX)

PSS 41H-7NWEQUIP, Rev H 59

The Foxboro DCS Control Network Ethernet Equipment Redundant Power Supplies

RH102AW (Redundant Power Supply) for RH102AQ

NOTE: Two separate branch circuits are required for redundant power to maintain
full power supply redundancy to the switch.
The 90 W redundant power supply (RH102AW) can supply redundant power for the
RH102AQ switch.
The RH102AW RPS-90 operates in a parallel capacity with the switch’s internal power
supply. In case an AC power loss is detected or there is a detected failure of an
internal power supply, the redundant power supply supports the full load of the switch
without affecting network operation.

Features
The redundant power supply for the DCS Control Network qualified switches:
• Desktop, shelf, rack mounting
• The RH102AW RPS is a “Brick” style power supply and can be installed in any
location
• Up to 90 W of power per supply

Functional Specifications
Power • AC Input Range:
90 VAC to 264 VAC Hz, 47 to 63 Hz
• Output:
+19.0 VDC, 90 Watts

Environmental Specifications
Operating Storage
Temperature 0° to 60°C (32° to 140°F) -40° to +70°C (-40° to +158°F)
Relative Humidity 10 to 95% (non-condensing) 10 to 95% (non-condensing)

Regulatory Compliance and Certification

Regulatory Compliance, Product UL Listed, CSA Certified, European Low Voltage Directive 2014/35/EU
Safety
Regulatory Compliance, European EMC Directive 2014/30/EU
Electromagnetic Compatibility
(EMC) Complies with 47 CFR Parts 2 and VCCI V-3
AS/NZS RCM Certified
Location UL/UL-C listed as suitable for use in ordinary locations and is designed to
help meet ordinary safety standards for fire and shock hazards
Contamination Class G1 (Mild) as defined in ISA Standard S71.04

60 PSS 41H-7NWEQUIP, Rev H

Redundant Power Supplies The Foxboro DCS Control Network Ethernet Equipment

RH102AX Rev. B (Redundant Power Supply)

NOTE: Two separate branch circuits are required for redundant power.
The 156 W redundant power supply (RH102AX) can supply redundant power for the
RH102AD, RH102AM, RH102AN, RH102AP, or RH102AY (Summit family of
switched) managed switches.
NOTE: The RH102AX RPS cannot be used for the RH102AQ switch.
The RH102AX PRS operates in a parallel capacity with the switch’s internal power
supply. In case an AC power loss is detected or there is a detected failure of an
internal power supply, the redundant power supply supports the full load of the switch
without affecting network operation.
The (RPS) redundant power supply (RH102AX) must be used with the (RPSC)
Redundant Power Supply Chassis (RH102AV). This chassis does not have AC power
connections or electronics.
The RH102AV power supply chassis accommodates three power supply units
(RH102AX) which can support up to three switches.

Figure 20 - Redundant Power Supply (RH102AX) for X440 switches (RH102AD/

AN/AP/AM/AY)

Features
The redundant power supply for the DCS Control Network qualified switches:
• Support for up to three managed switches (one supply/switch)
• Desktop, shelf, or 19-inch rack mounting
• Up to 156 W of power per supply

Functional Specifications
Power • AC Input Range:
90 VAC to 264 VAC, 47 to 63 Hz
• Output:
+12.0 VDC, 13 A Max
102 W or 156 W continuous

PSS 41H-7NWEQUIP, Rev H 61

The Foxboro DCS Control Network Ethernet Equipment Redundant Power Supplies

Environmental Specifications
Operating Storage
Temperature 5° to 60°C (41° to 140°F) -45° to +85°C (-49° to +185°F)
Relative Humidity 10% to 90% (non-condensing) 10% to 90% (non-condensing)

Physical Specifications
Mounting Redundant power supply chassis (RH102AV for three RPS)
Dimensions (Nominal) • Height: 4.1 cm (1.61 in)
• Width: 15.4 cm (6.1 in)
• Depth: 30.0 cm (11.8 in)
Weight (Approximate) 1.5 kg (3.3 lb)

Regulatory and Safety

Regulatory Compliance, Product UL Listed, CSA Certified, European Low Voltage Directive 2014/35/EU
Safety
Regulatory Compliance, European EMC Directive 2014/30/EU
Electromagnetic Compatibility
(EMC) Complies with 47 CFR Parts 2 and VCCI V-3
AS/NZS RCM Certified
Location UL/UL-C listed as suitable for use in ordinary locations and is designed to
help meet ordinary safety standards for fire and shock hazards
Contamination Class G1 (Mild) as defined in ISA Standard S71.04

62 PSS 41H-7NWEQUIP, Rev H

GBICS The Foxboro DCS Control Network Ethernet Equipment

GBICS
GBICs convert serial electrical signals to serial optical signals and vice versa. GBIC
modules are hot swappable and contain ID and system information for the switch.

GBICs: Non-Industrial
• RH102AL: 100 m (328 ft) RJ-45 MGBIC Uplink module (TX) 10/100/1000Base-T
• RH102BK: 100Base-FX 2 km (1.24 mi) MGBIC device module LC (1310 N-m)
• RH102BQ: 10 Gb SR SFP+ module 300 m (984 ft) MMF 850 N-m
• RH102BR: 10 Gb LR SFP+ module 10 km (6.2 mi) SMF
• RH102BS: 10 Gb LRM SFP+ module 220 m (656 ft) MMF, 300 m (984 ft) SMF
• RH102BT: 10 Gb ZR SFP+ module 80 km (49.7 mi) SMF
• P0973JB: Bi-directional Uplink 10K MGBIC module LC LX (1310 N-m)
• P0973JC: Bi-directional Downlink 10K MGBIC module LC LX (1490 N-m)
• P0973JD: Bi-directional MGBIC Kit containing both Downlink and Uplink 10K
MGBIC
• P0973KM: Bi-directional Uplink 40K MGBIC module BX (1310 N-m)
• P0973KN: Bi-directional Downlink 40K MGBIC module BX (1490 N-m)
• P0973KP: Bi-directional MGBIC Kit containing both Downlink and Uplink 40K
MGBIC
• P0973KQ: Bi-directional Uplink 120K MGBIC module BX (1490 N-m)
• P0973KR: Bi-directional Downlink 120K MGBIC module BX (1590 N-m)
• P0973KS: Bi-directional MGBIC Kit containing both downlink and uplink 120K
MGBIC

GBICs: Industrial (GRS-1030 GREYHOUND)

• RH102HA: 100Base-FX 2 km (1.24 mi) Transceiver device module LC (1310 N-
m)
• RH102HB: 1000Base-LX, 550 m (1804 ft) 50/125 μm MMF, 550 m (1804 ft) 62.5/
125 μm MMF, 10 km (6.2 mi) 9/125 μm SMF
• RH102HC: 275 m (902 ft) MGBIC module LC (SX) 850 N-m 1000Base-SX
• RH102HD: 80 km (49.7 mi) Transceiver module LC (ZX) 1550 N-m
• RH102HF: 1 Gb Bi-directional Transceiver Kit containing both downlink and
uplink 10K MGBIC
• RH102HG: 1 Gb Bi-directional Transceiver Downlink and Uplink 40K MGBIC
• RH102HH: 1 Gb Bi-directional Transceiver Downlink and Uplink 40K MGBIC
• RH102HJ: 1 Gb Bi-directional Transceiver Downlink and Uplink 120K MGBIC
• RH102HK: 1 Gb Bi-directional Transceiver Downlink and Uplink 120K MGBIC

PSS 41H-7NWEQUIP, Rev H 63

The Foxboro DCS Control Network Ethernet Equipment GBICS

Mini-GBIC SFP Connector Modules for Each Switch Type

Switch Type Supported Mini-GBIC SFP Connector Modules
Description Foxboro Part No.
For more information, see Link
Power Budget for Fiber Optic Mini-
GBIC Modules table, page 65 to
determine the maximum range for
each device and application.
All switch types that support SFP SFP MMF module 1000Base-SX P0972WT: LC connector, Multi-
and SFP+ ports with LC connector, multi-mode fiber mode Fiber
transmitting frequency @ 850 N-m
SFP SMF module 1000Base-LX RH102AH: LC connector, Single-
with LC connector, single-mode mode Fiber
Fiber transmitting frequency @
1310 N-m
SFP MMF module 1000Base-LX/LH P0972YQ: LC connector, Multi-
with LC connector, multi-mode Fiber mode Fiber
transmitting frequency @ 1300 N-m
SFP SMF module 1000Base-ZX P0973FT: LC connector, Single-
with LC connector, single-mode mode Fiber
Fiber transmitting frequency @ 1310
N-m
SFP S-SMF module 1000Base-BX P0973JD(a): LC connector, Bi-
with LC connector, bi-directional directional Simplex Single-mode
Simplex single-mode fiber Fiber
transmitting frequency @ 1310 N-m/
1490 N-m downlink/uplink Mini-
GBIC Kit: Includes both P0973JB
and P0973JC modules
SFP S-SMF module 1000Base-BX P0973KP(b): LC connector, Bi-
with LC connector, bi-directional directional Simplex Single-mode
simplex-single-mode fiber Fiber
transmitting frequency @ 1310 N-m/
1490 N-m downlink/uplink Mini-
GBIC Kit: Includes both P0973KM
and P0973KN modules
SFP S-SMF module 1000Base-BX P0973KS(c): LC connector, Bi-
with LC connector, bi-directional directional Simplex Single-mode
simplex single-mode fiber Fiber
transmitting frequency @ 1310 N-m/
1490 N-m downlink/uplink Mini-
GBIC Kit: Includes both P0973KQ
and P0973KR modules
SFP+ 10GBase-SR with LC RH102BQ: LC connector
connectors
SFP+ 10GBase-LR with LC RH102BR: LC connector
connectors
SFP+ 10GBase-LRM with LC RH102BS: LC connector
connectors
SFP+ 10GBase-ZR with LC RH102BT: LC connector
connectors

64 PSS 41H-7NWEQUIP, Rev H

GBICS The Foxboro DCS Control Network Ethernet Equipment

Switch Type Supported Mini-GBIC SFP Connector Modules

1000Base-T is supported on all SFP module 100/1000Base-T with RH102AL: RJ-45 connector, copper
switch types that support SFP and RJ-45 connectors
SFP+ ports
100Base-T is supported on X-Series
switches and only SFP ports (no
SFP+ ports)
100Base-LX is supported on X- SFP MMF module 100Base-LX with P0973JE or RH102BK: LC
Series, C-Series, and S-Series LC connector, Multi-mode Fiber connector, Multi-mode Fiber
switch types that support SFP ports transmitting frequency @ 1310 N-m
(no SFP+ ports)
(a) Kit P0973JD is comprised of two Mini-GBICs (P0973JB and P0973JC). P0973JC transmits “downstream” (from
the core of the network to the edge) using the 1490 N-m wavelength, and the “edge” P0973JB transmits
“upstream” using the 1310 N-m wavelength.
(b) Kit P0973KP (40 km (25 mi)) is comprised of two Mini-GBICs (P0973KM and P0973KN). P0973KN transmits
“downstream” (from the core of the network to the edge) using the 1490 N-m wavelength, and the “edge” P0973KM
transmits “upstream” using the 1310 N-m wavelength over Simplex Single-mode Fiber (S-SMF).
(c) Kit P0973KS (120 km (124 mi)) is comprised of two Mini-GBICs (P0973KQ and P0973KR). P0973KR transmits
“downstream” (from the core of the network to the edge) using the 1590 N-m wavelength, and the “edge” P0973KQ
transmits “upstream” using the 1490 N-m wavelength over Simplex Single-mode Fiber (S-SMF) at a minimum
distance of 30 km (19 mi).

Operating Range for Mini-GBIC Uplink Connector Modules

Link Power Budget
The maximum drive distance depends on the quality of the installed single-mode and
multi-mode fiber-optic cable segment. In association with your cable attenuation, use
the link power budget to calculate the maximum cable length of the attached segment.
The link power budget must not be exceeded.
The Link Power Budget for Fiber Optic Mini-GBIC Modules table, page 65 lists the
operating ranges for the Mini-GBIC connector modules that can be used with the
Control Network switches. For more information, see the Mini-GBIC SFP Connector
Modules for Each Switch Type table, page 64 for the Mini-GBIC modules which can
be used with each switch type.

Link Power Budget for Fiber Optic Mini-GBIC Modules(a)

Product Part Cable Type Tx/Rx MHz/km Range
Number(b) Wavelength
Min. (Meters) Max. (Meters)
P0972WT 62.5µm 850 160 2 220
62.5µm 200 2 275
50µm 400 2 500
50µm 500 2 550
P0972YQ 62.5µm 1310 160 2 2000
50µm 400 2 1000

PSS 41H-7NWEQUIP, Rev H 65

The Foxboro DCS Control Network Ethernet Equipment GBICS

Product Part Cable Type Tx/Rx MHz/km Range

Number(b) Wavelength
Min. (Meters) Max. (Meters)
P0972WU 9-10µm 1310 — — 10000
P0973FT(c) 9-10µm 1550 — — 80000
P0973JC(d) 9µm 1490/1310 — — 10000
P0973JE(e) 62.5µm 1310 160µm 2 2000
50µm 400 2 1000
P0973KM(d) 9µm 1310/1490 — 5000 40000
P0973KN(d) 9µm 1490/1310 — 5000 40000
P0973KQ(d) 9µm 1490/1590 — 30000 120000
P0973KR(d) 9µm 1590/1490 — 30000 120000
RH102BQ 62.5µm 850 160 - 26
62.5µm 850 200 - 33
50 µm 850 400 - 66
50 µm 850 500 - 82
50 µm 850 2000 - 300
RH102BR 9-10 µm 1310 - - 10000
RH102BS 62.5µm 1260 - - 220
9-10 µm 1355 - - 300
RH102BT 9-10 µm 1550 - 2000 80000
RH102BK 62.5µm 1310 160 µm 2 2000
(a) Transmission distances are provided as a nominal guide only. For more information, see the optical
specifications and the specific characteristics of your fiber installation to determine targeted distances.
(b) Industrial MGBIC to be used with I-Series industrial switch (P0973GA) with thermal limits of -40° to +60°C (-40°
to +140°F). All other MGBICs are thermal rated at 0° to +50°C (32° to +122°F).
(c) Do not use the P0973FT MGBIC over distances less than 8 km (5.0 mi).
(d) P0973JB/JC, P0973KM/KN, and P0973KQ/KR are bidirectional Mini-GBICs. Both upstream and downstream
switches transmit on the same fiber but at different frequencies. When ordering these Mini-GBICs, you must
acquire a matching pair, one of each type. For a matching pair, order kits P0973JD (10 km (6.2 mi)), P0973KP (40
km (25 mi)), or P0973KS (120 km (74.6 mi)) which include one of each of the modules.
(e) This Mini-GBIC (P0973JE) is not to be used as an uplink (ISL) port. This Mini-GBIC has been qualified to be
used for an end device (CP, ATS, FCM, workstation, and so on) 100 Mb switch port.

66 PSS 41H-7NWEQUIP, Rev H

 WARNING: This product can
expose you to chemicals
including lead and lead
compounds, which are
known to the State of
California to cause cancer
and birth defects or other
reproductive harm. For more
information, go to
www.p65warnings.ca.gov/.

Schneider Electric Systems USA, Inc.

70 Mechanic Street
Foxboro, Massachusetts 02035–2040
United States of America

Global Customer Support: https://pasupport.se.com

As standards, specifications, and design change from time to time,

please ask for confirmation of the information given in this publication.

© 2018–2023 Schneider Electric. All rights reserved.

PSS 41H-7NWEQUIP, Rev H
Foxboro™ DCS
Field Control Processor 280 (FCP280)

PSS 41H-1FCP280
Product Specification

October 2020

https://www.se.com
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its
subsidiaries referred to in this guide are the property of Schneider Electric SE or its
subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished
for informational use only. No part of this guide may be reproduced or transmitted in
any form or by any means (electronic, mechanical, photocopying, recording, or
otherwise), for any purpose, without the prior written permission of Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide
or its content, except for a non-exclusive and personal license to consult it on an "as is"
basis. Schneider Electric products and equipment should be installed, operated,
serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information
contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informational
content of this material or consequences arising out of or resulting from the use of the
information contained herein.
Overview Field Control Processor 280 (FCP280)

Overview
The EcoStruxure™ Foxboro™ DCS Field Control Processor 280 (FCP280) is a
distributed, optionally fault-tolerant, field-mounted controller module. The FCP280
performs regulatory, logic, timing, and sequential control together with connected
Foxboro DCS Fieldbus Modules (FBMs). It also performs data acquisition and alarm
detection and notification. The FCP280 connects to the Foxboro DCS Control
Network via standard fiber optic or copper 100 Mbps Ethernet cables from network
adapters installed on its baseplate (see the next figure).
The FCP280 requires Foxboro DCS Control Core Services software v9.0 or later. A
system with the FCP280 and this software is called an EcoStruxure Foxboro DCS
Process Automation System.

PSS 41H-1FCP280, Rev. D 3

Field Control Processor 280 (FCP280) Overview

Figure 1 - Fault-Tolerant FCP280 Module Pair Mounted on Vertical Mounted 2-

Position FCP280 Baseplate

Legend
A To/From Control Network Ethernet Fiber Switch “B”
B 100 Mbps Orange Duplex Fiber Cable
C To/From Control Network Ethernet Fiber Switch “A”
D FCP280 Fault-Tolerant Module Pair
E Each Fieldbus Port (1-4. Top 1, Bottom 4) can connect to fieldbus with Compact
and/or standard 200 Series FBMs, or 100 Series FBMs in a pre-approved
configuration
F Liquid Crystal Display
G Operational LED’s for module state and Fieldbus communication
H Down-Arrow Button
I Up-Arrow Button
J Select Button
K Network Adapters (Fiber Adapters Shown, Copper Adapters available)
L Operational LEDs for communication status to/from the Control Network

The fault-tolerant version of the FCP280 consists of two processor modules. These
modules are installed in adjacent FCP280 slots in dedicated baseplates for high
speed communication between the modules.
The FCP280 accepts four PIO channels (that is, four separate HDLC fieldbuses) via
the four Fieldbus ports on its baseplate. These four Fieldbuses are referred to
collectively as the “Expanded fieldbus.”

4 PSS 41H-1FCP280, Rev. D

Overview Field Control Processor 280 (FCP280)

An optional dual cable baseplate is available that supports four PIO channels, but
separate A versus B bus connectors are provided along with dedicated connectors for
the optional Time Strobe inputs.
Fieldbus connections from the optional dual cable baseplate to standard or compact
200 Series FBMs require separate A versus B bus cables plus a dual “D” connection
adapter on the FBM baseplate (RH926KW).
The number of FBMs that an FCP280 can support varies depending on the types of
FBMs used:
• 200 Series FBMs exclusively used with FCP280 - Each Fieldbus port on the
FCP280 baseplate can connect to a baseplate chain with up to 32 Compact or
standard 200 Series FBMs per chain via the 2 Mbps HDLC fieldbus for up to 128
modules.
• 200 Series and 100 Series FBMs (dual baud configurations) used with FCP280.
The FCP280 can support a total of 128 100 Series FBMs (Y-module) or
competitive devices (such as Foxboro DCS system migration FBMs) in one or
more baseplate chains, with the remainder of the FCP280’s 128 module limit
being 200 Series FBMs, depending on the Fieldbus loading of the FCP280. For
example, an FCP280 could support 64 100 Series FBMs and 64 200 Series
FBMs (as 64 + 64 = 128). Main and expansion FBMs are considered as two
FBMs for counting purposes. As well, no more than 64 100 Series FBMs are
allowed on each PIO bus/baseplate port. See the next two figures.
NOTE: Certain competitive migration or supported third-party modules such as
the EcoStruxure Foxboro DCS Process Automation System Migration Fieldbus
Modules and Pepperl+Fuchs™ I/O modules may increase this 128 module
maximum per FCP280. For the maximum numbers of each of these migration/
third-party modules supported by the FCP280, see the supported migration
products books in Field Control Processor 280 (FCP280) User’s Guide
(B0700FW).
NOTE: The dual cable baseplate does not support connections to 100 Series
FBMs or equivalent competitive migration and third-party modules.
NOTE: Although the FCP280 is capable of communicating with the maximum
number of FBMs (128), some restrictions may constrain a useful control system's
design, thereby limiting the number of FBMs that can be installed.
When supporting 200 Series and 100 Series FBMs, each Fieldbus port (PIO channel)
is dedicated to supporting either a 268 Kbps HDLC fieldbus (for 100 Series FBMs) or
a 2 Mbps HDLC fieldbus (for 200 Series FBMs) — not both.
For connections to 100 Series FBMs, an FBI200 pair is required to extend
communications up to 1,830 m (6,000 ft). See the next figure.
NOTE: When replacing a CP10, CP30, CP40, or CP60 with a FCP280 and
keeping all its 100 Series FBMs, an FBI200 is required to be installed between the
CP and FBMs to reduce potential system messages.
The Fieldbus splitter (RH928CV) is used to directly connect a Fieldbus port to a 268
Kbps HDLC fieldbus. This provides a connector for any Fieldbus port on the FCP280
baseplate, and two Termination Cable Assembly (TCA) termination blocks for the
twinaxial cabling from the 100 Series FBMs.
The FCP280 can also communicate with serial and Ethernet devices, such as PLCs,
via Field Device System Integrators (special FBMs). This allows you to connect to
new device interfaces without any changes to the controller software.
To estimate the FCP280’s processor load, see Field Control Processor 280 (FCP280)
Sizing Guidelines and Excel Workbook (B0700FY).
For a description of the FCP280 baseplates, see Standard 200 Series Baseplates
(PSS 41H-2SBASPLT).

PSS 41H-1FCP280, Rev. D 5

Field Control Processor 280 (FCP280) Overview

Figure 2 - Typical FCP280 Network Configuration with Mixed 100 Series and 200 Series FBM Functionality
(Simplified)

The Foxboro DCS Control Network

100 Series FBMs can be connected to any
Switch Switch Fieldbus port on FCP280 baseplate, provided
that port is used exclusively with 100 Series FBMs.
Fiber optic cabling For direct termination cable assembly (TCA)
Copper cabling FCP280 Standard Vertical Baseplate connections to the Fieldbus ports (i.e. without
Fiber FBI200s), refer to the next figure.
can be used as well
adapters
when copper adapters FCP FCP
are installed in the 280 280
FCP280 baseplate.

Termination Cable Assembly

Standard Compact Standard Termination Block (RH928CV)
200 Series FBMs 200 Series FBMs 200 Series FBMs

F F F F F F F F F F F F F F F F
FBM
FBM
FBM
FBM
FBM
FBM
FBM
FBM

FBM
FBM
FBM
FBM
FBM
FBM
FBM
FBM
B B B B B B B B B B B B B B B B
M M M M M M M M M M M M M M M M

To Next Baseplate in Chain To Next Baseplate in Chain To Next Baseplate in Chain

(Chain supports up to 32 (Refer to PSS 41H-2COV (Chain supports up to 32
200 Series FBMs total); for baseplate chain 200 Series FBMs total)
FCM2F2/4/10 modules may configurations with Compact
be installed in the baseplates in 200 Series baseplates) To other FBIs
a chain to extend the distance 1x8 Mounting Structure
Twinaxial Cables
as explained in PSS 41H-2FCM.
1 Km (3200 ft) Maximum
(P0170GF or P0170GG) 100 Series I O I O

200 Series FBMs and/or 200 As well, FBI200 supports Fieldbus

Series Competitive Migration customer-supplied cables Isolators
Modules (See the “Devices up to 60 m (198 ft) (FBIs)
Supported” topic below.) Also, see the third Note below.

100 Series FBMs and/or 100 Series Competitive

Migration Modules (See the “Devices To other FBIs
Supported” topic below.) - Up to 64 100 Series
FBMs supported per chain (128 total per
FCP280)

The FCP280 supports up to 128 FBMs, which can consist of one of these options: 128
200 Series FBMs, 128 100 Series FBMs, or a mix of 128 200 Series and 100 Series
FBMs. If you use a mix of 100 Series and 200 Series FBMs, the FBMs cannot be
mixed concurrently on the same PIO channel. Each PIO channel must be configured
to either a 268 Kbps or 2 Mbps HDLC fieldbus.
The 100 Series FBMs can be connected to any fieldbus port on the FCP280
baseplate, provided that the overall FBM limit of 128 100 Series FBMs is maintained
for the FCP280. Up to 64 100 Series FBMs are supported on each PIO channel/
baseplate port.
An FBI200 may be included on this connection to extend the distance between the
100 Series FBIs and the FCP280 baseplate. In mixed configurations (100 and 200
Series FBMs) the FCP280 can communicate on the 268 Kbps HDLC fieldbus up to 60
m (198 ft). When communicating with a 268 Kbps HDLC fieldbus only, the FCP280
can communicate on this fieldbus up to 1 km (3,200 ft). The FBI100 pair may be used
in place of FBI200s. For sizing constraints and devices supported by the FBI200, see
FBI200 Fieldbus Isolator/Filter (PSS 41H-2FBI200). For sizing constraints and
devices supported by the FBI100, see FBI100 Fieldbus Isolator/Filter (PSS 21H-2Y16
B4). The FBI200/FBI100 extends the distance of the HDLC fieldbus between the
FCP280 and the FBMs up to 1,830 m (6,000 ft). The FBI200 can be used with 200
Series FBMs as well to extend the cabling distances to them. The FBI100 is used
exclusively with 100 Series FBMs to extend the cabling distances to them.

6 PSS 41H-1FCP280, Rev. D

Overview Field Control Processor 280 (FCP280)

Figure 3 - Typical FCP280 Network Configuration with Exclusive 100 Series FBM Functionality (Simplified)
The Foxboro DCS Control Network

Switch Switch 100 Series FBMs can be connected to any Fieldbus port on FCP280
baseplate, provided that port is used exclusively with 100 Series FBMs.
Termination Cable Assembly
FCP280 Standard Vertical Baseplate Termination Block (RH928CV)
Fiber optic
cabling - A
Fiber B
Copper cabling adapters
A
can be used as well FCP FCP B
when copper adapters
are installed in the 280 280
FCP280 baseplate.
Refer to B0700FW for the list
of switches which are not supported Twinaxial Cables
by the FCP280. 1 Km (3200 ft) Maximum
(P0170GF or P0170GG)
- See second Note
below B A B A
To other FBIs To other FBIs
1x8 Mounting Structure 1x8 Mounting Structure

I O I O I O I O

100 Series FBMs and/or 100 Series

Competitive Migration Modules (See
“Devices Supported” topic below.)

To other FBIs To other FBIs

100 Series
Fieldbus Isolators (FBIs)

The FCP280 supports up to 128 100 Series FBMs total. Up to 64 100 Series FBMs
are allowed on each PIO port/Fieldbus port.
The FBI200 is needed only to extend the distance between the 100 Series FBIs and
the FCP280 baseplate. When communicating with a 268 Kbps HDLC fieldbus only,
the FCP280 can communicate on this fieldbus up to 1 km (3,200 ft). FBI100 pair may
be used in place of FBI200s. For sizing constraints and devices supported by the
FBI200, see FBI200 Fieldbus Isolator/Filter (PSS 41H-2FBI200). For sizing
constraints and devices supported by the FBI100, see FBI100 Fieldbus Isolator/Filter
(PSS 21H-2Y16 B4). The FBI200/FBI100 extends the distance of the HDLC fieldbus
between the FCP280 and the FBMs up to 1,830 m (6,000 ft). Twinaxial cables over 1
km (3,200 ft) are customer supplied.
The RH928CV splitter has a 3 m (9.8 ft) cable between the fieldbus port connector
and TCA termination block.

PSS 41H-1FCP280, Rev. D 7

Field Control Processor 280 (FCP280) Features

Features
• Performs regulatory, logic, timing, and sequential control together with connected
Foxboro DCS Fieldbus Modules (FBMs)
• Performs data acquisition and alarm detection and notification
• Supports up to 128 Compact or standard 200 Series FBMs, 128 100 Series
FBMs, or up to 128 of a combination of 100 Series FBMs and 200 Series FBMs,
and no Fieldbus Communication Module is required (a maximum of 64 100
Series FBMs are allowed on each PIO bus/baseplate port)
• No Fieldbus Expansion Module is required for Expanded Fieldbus support
• Supports self-hosting mode, which allows the FCP280 to boot itself with a valid
control database even without its host workstation being on-line. However, editing
control functions will not be possible.
• Offers unique, patented, fault-tolerant operation using two control modules to
greatly improve reliability relative to other process controllers
• Offers on-line image upgrade (OLUG) of a fault-tolerant FCP280
• Offers an enhanced on-line image upgrade (EOLUG) of a fault-tolerant FCP280
while the process is running. This form of upgrade helps prevent any significant
bumps to the local control process.
• Offers CP Overload Protection, that notifies an operator if an FCP280 is being
pushed toward its performance limits
• Liquid Crystal Display (LCD) displays letterbug and real-time roles and statuses
• Connects to the Foxboro DCS Control Network via standard fiber optic or copper
100 Mbps Ethernet cables
• Uses a rugged, die cast aluminum housing for mounting in a non-vented field
enclosure
• Can operate in Class G3 harsh environments
• CE certified for field mounting in enclosures
• Each fieldbus port on standard FCP280 baseplates supports either a 2 Mbps or
268 Kbps HDLC fieldbus exclusively
• Uses versatile control algorithms and a wide variety of FBMs to provide control
capabilities for a broad range of process applications
• Supports time synchronization using optional external time from GPS satellites
• Uses soft letterbugs configurable via the keys on the FCP280 faceplate
• The optional dual cable baseplate enables separate cables to be used for each
“A” and “B” bus

8 PSS 41H-1FCP280, Rev. D

Features Field Control Processor 280 (FCP280)

Fiber and Copper Network Adapters

FCP280 modules connect to a pair of fiber or copper adapters which each connect to
one Ethernet switch in the Control Network. The FCP280 baseplate passes inbound
traffic from either of the two switches to both FCP280s, and pass outbound traffic from
the primary FCP280 module to either switch.

Figure 4 - Fiber Optic and Copper Network Adapters

Fiber Adapter (RH924WA) Copper Adapter (RH924UQ)

The fiber or copper adapters mount on the FCP280 baseplate as shown in Fault-
Tolerant FCP280 Module Pair Mounted on Vertical Mounted 2-Position FCP280
Baseplate, page 4. They receive their power from the baseplate.

Remote Mounting
The FCP280 simplifies the Foxboro DCS System architecture, maintaining control
while only requiring housing (via field enclosures), host workstations with the Control
Core Services v9.0 or later, and Ethernet switches for communication via the Control
Network architecture. For more information, see The Foxboro DCS Control Network
Ethernet Equipment (PSS 41H-7NWEQUIP).
The field-mounted FCP280 is an integral part of the highly-distributed Control Network
where controllers are closely aligned to specific process units mounted in close
proximity to their I/O and the actual equipment being controlled. Coordination between
process units takes place via a fiber optic 100 Mbps Ethernet network.
The FCP280 and its network adapters are packaged in a rugged, die cast aluminum
housing that does not require venting due to its efficient design. The FCP280 and its
network adapters are CE certified, and it can be mounted without expensive special
cabinets to help prevent electronic emissions. The FCP280, network adapters, and
baseplate can be mounted in Class G3 harsh environments.

PSS 41H-1FCP280, Rev. D 9

Field Control Processor 280 (FCP280) Features

Enhanced Reliability (Fault-Tolerance)

The unique and patented fault-tolerant operation of the FCP280 improves reliability
relative to legacy process controllers. The fault-tolerant version of the FCP280
consists of two modules operating in parallel, with two Ethernet connections to the
Control Network. The two FCP280 modules, married together as a fault-tolerant pair,
provide continuous operation of the controller in the event of virtually any hardware
occurrence within one module of the pair.
Both modules receive and process information simultaneously, and faults are
detected by the modules themselves. One of the significant methods of fault detection
is comparison of communication messages at the module external interfaces.
Messages only leave the FCP280 when both FCP280s agree on the message being
sent (bit for bit match). Upon detection of a fault, self-diagnostics are run by both
modules to determine which module is affected. The non-affected module then
assumes control without affecting normal system operations.
This fault-tolerant solution has the following major advantages over controllers that
are merely redundant:
• No bad messages are sent to the field or to applications using controller data
because no message is allowed out of the controller unless both modules match
bit for bit on the message being sent.
• The secondary controller is synchronized with the primary one, which helps
ensure up to the moment data in the event of a primary controller occurrence.
• The secondary controller will have latent flaws detected prior to any switchover
because it is performing exactly the same operations as the primary controller.

Upgrade Options
Multiple options are available for replacing existing control processors with the
FCP280. A fault-tolerant FCP280 may replace a fault-tolerant FCP270 or ZCP270. It
may import the CP database from the CP270 it is replacing, for compatibility and
minimal configuration time.
The FCP280 provides an increase in performance and block processing capacity over
the CP270s. When replacing the FCP270s with the FCP280, you do not need the
FEM100 hardware.
For ease of replacement, the fault-tolerant or non-fault-tolerant FCP280 in the
standard baseplate has the same dimensions as the fault-tolerant or non-fault-tolerant
FCP270 in its baseplate.
The dual cable baseplate has larger dimensions than the standard baseplate.
Cabling the 100 Series FBMs or Migration products to an FCP280 baseplate consists
of extending the remote 268 Kbps fieldbus between enclosures. This is accomplished
using termination cable assemblies (TCAs) and Fieldbus Isolators (FBIs) to provide
connections between primary and extended fieldbus segments.
The optional FBI200 can extend the 2 Mbps HDLC fieldbus between 200 Series FBMs
from 60 m (198 ft) up to 305 m (1000 ft). As well, for standard FCP280 baseplates, it
can extend the 268 Kbps HDLC fieldbus between 100 Series FBMs from 60 m (198 ft)
in a mixed 100 & 200 Series FBMs configuration (or 300 m (1,000 ft) in an exclusive
100 Series FBMs configuration) up to 1830 m (6,000 ft).
As with earlier generations of control processors, up to 128 100 Series FBMs
(including expansion modules) attach to standard baseplate Fieldbus ports through
Fieldbus Isolators (with a maximum of 64 100 Series FBMs per port). Up to 24 100
Series FBMs, excluding expansion modules, can connect to each isolator. However,
the expansion modules are considered 100 Series FBMs in this “128 100 Series
FBMs” maximum discussed in this PSS. Available upgrade scenarios are available in
Field Control Processor 280 (FCP280) User’s Guide (B0700FW).

10 PSS 41H-1FCP280, Rev. D

Features Field Control Processor 280 (FCP280)

FBI200 Fieldbus Isolator/Filter

The FBI200 Fieldbus Isolator/Filter extends the length of the 268 Kbps module
Fieldbus from the FCP280 to 100 Series FBMs and similar competitive migration
modules up to 1,830 m (6,000 ft) over a twinaxial Fieldbus cable. See Typical FCP280
Network Configuration with Mixed 100 Series and 200 Series FBM Functionality
(Simplified), page 6.
It can also extend the 2 Mbps HDLC fieldbus to 200 Series FBMs up to 305 m (1,000
ft).
For more information on the FBI200, see FBI200 Fieldbus Isolator/Filter (PSS 41H-
2FBI200).

Firmware Upgrades While On-Line

For fault-tolerant FCP280 modules, on-line image upgrade (OLUG) replaces the
executable image (operating system) of a running FCP280 with a newer image.
The enhanced on-line image upgrade (EOLUG) improves on this process by
upgrading the FCP280 modules without having to shut down the equipment being
controlled by the FCP280. This form of upgrade helps prevent any significant bumps
to the local control process, removes the initialization of sequence logic and
decreases the Object Manager reconnection time.

Time Synchronization, SOE, TDR/TDA

The Foxboro DCS System supports time synchronization using either an externally
maintained optional source of Universal Coordinated Time (UTC) from GPS satellites
or an internal source using proprietary software. FCP280s that receive time updates
via the external time source synchronize their FBMs to 1 ms. For more information on
time synchronization, see Time Synchronization Overview (PSS 41S-1TIME).
Time stamping is used for alarm messages, values sent to the historian, the Foxboro
DCS Sequence Of Events (SOE) and Transient Data Recorder (TDR), and Transient
Data Analyzer (TDA) features.
SOE data are discrete points that are time stamped at the FBM, optionally to 1 ms,
and sent to the workstation on a change basis. TDR/TDA data are analog or digital
points that are time stamped at the FBM and sent to the workstation every 10 ms.
These features are supported by client software in the workstation. For information on
this new software, see Field Control Processor 280 (FCP280) Integrated Control
Software (PSS 41S-3FCPICS).
Time strobe signals are delivered from custom switches over Ethernet cables.
However, the method by which these Ethernet cables connect to the FCP280
baseplates differs depending on the baseplate. The standard vertical and horizontal
baseplates’ RH924YF's first HDLC connector (upper right-hand side of the baseplate)
accepts time strobe signals via time strobe adapter (RH924ZQ), which is discussed in
"Module Fieldbus and Time Strobe Splitters/Terminators" in Standard and Compact
200 Series Subsystem User's Guide (B0400FA). Receiving the time strobe signals on
the standard baseplate requires the use of the RH924ZQ adapter on the first HDLC
port on the baseplate, and in this configuration, this port cannot be used for any other
purpose. The dual cable baseplate (RH100JX) has two dedicated RJ-45 ports on its
upper right-hand side to accept these Ethernet cables directly without the use of the
RH924ZQ adapter.

PSS 41H-1FCP280, Rev. D 11

Field Control Processor 280 (FCP280) Features

Software Control Features

The FCP280 performs regulatory, logic, timing, and sequential control, as well as data
acquisition, alarm detection, and alarm notification. Process variables are controlled
using time-proven algorithms (mathematical computations performing specific
functions). The algorithms are contained in functional control blocks, which on-site
process engineers configure to implement the desired control strategies.
The versatility of the algorithms, coupled with the variety of FBMs available, provides
control capabilities suited to a broad range of process applications. Control strategies
ranging from simple feedback and cascade loops to highly sophisticated feedforward,
nonlinear, and complex characterization control schemes are readily implemented.
The FCP280 also supports the following features:
• Setting and reading the FCP280 letterbug via the buttons on the faceplate
• Alarm enhancements to function blocks:
◦ Re-alarming on changes to alarm priority
◦ Re-alarming based upon a configurable time delay deadband, and alarm
suppression based on time
• Optional UTC external time synchronization
• Improved controller performance
• Optional self-hosting mode allows the FCP280 to start up and run, executing its
configured control scheme using the checkpoint file stored in flash memory. This
allows the FCP280 to boot itself with a valid control database even if its host
workstation is not present.
• Support for high speed capabilities such as ladder logic, Motor Driven Actuator
Controller (MDACT), and Distributed Proportional Integral Derivative functionality
(DPIDA)

Devices Supported
The FCP280 supports the following devices on the 2 Mbps fieldbus:
• All Compact and Standard 200 Series FBMs, which can support many types of
intelligent field devices, including those on Foundation Fieldbus, PROFIBUS,
HART, and DeviceNet networks
• Foxboro DCS Field Device Systems Integrator (FDSI) modules
• Intrinsically Safe I/O Subsystem (ISCM) - see Intrinsically Safe I/O Subsystem
(PSS 31H-2Y6)
• DCS Migration Fieldbus Modules for Siemens APACS+ Systems
• DCS Migration Fieldbus Modules for Westinghouse WDPF® Systems
• DCS Migration Fieldbus Modules for Fisher's PROVOX® Series 20 Migration with
HART
• DCS Migration Fieldbus Modules for Honeywell® TDC 2000 Systems with HART
Using the standard baseplate, the FCP280 supports the following devices on the 268
Kbps fieldbus:
• 100 Series FBMs
• SPECTRUM™ Migration Integrators
• SPEC 200™ Control Integrators
• SPEC 200 MICRO™ Control Integrators
• SPEC 200 CCM Control Integrators
The Foxboro Gas Chromatograph is not supported.

12 PSS 41H-1FCP280, Rev. D

Features Field Control Processor 280 (FCP280)

The FCP280 supports the 100 Series Fieldbus Module Upgrade subsystem, with the
optional FBI200A modules. See 100 Series Fieldbus Module Upgrade Subsystem
Overview (PSS 41H-2W100).

FCP280 Baseplate
The FCP280 is installed on a modular, DIN rail mounted baseplate in a dedicated slot
that is keyed for the controller so that modules are not misplaced. The available
FCP280 baseplates are shown in this figure.

Figure 5 - FCP280 Baseplates

Standard FCP280 Baseplate for a horizontal DIN rail mount

(RH924YL)
4
1 2 3

Standard FCP280 Baseplate for a vertical DIN rail mount (RH924YF)

2
3
4

Dual Cable FCP280 baseplate for a vertical or horizontal DIN rail

mount (RH100JX)

1B
1A
2B
2A
3B
3A
4B
4A

These 2-position baseplates support a non-fault-tolerant single or fault-tolerant pair of

FCP280s, as well as two copper (RH924UQ) or fiber (RH924WA) adapters, required
for connection to the Control Network.
The FCP280 baseplate provides support for four HDLC fieldbuses (PIO channels). On
the standard baseplates, Fieldbus port 1 can be terminated, if needed, by the DIP
switches provided on the baseplate. Fieldbus ports 2-4 are internally terminated in the
FCP280 baseplates and no external hardware or switches are required for their

PSS 41H-1FCP280, Rev. D 13

Field Control Processor 280 (FCP280) Features

termination. All four Fieldbus port pairs (A/B) on the dual cable baseplate are
internally terminated by default without the use of DIP switches.
The FCP280 baseplates can be added in the field to existing or new configurations.
The standard FCP280 baseplates have similar dimensions as the FCP270 2-position
baseplates for ease of replacement, while the dual cable baseplates are larger and
wider.
When upgrading existing CP60 systems to use FCP280s, you can recover an
additional two FBM positions after removing the old FCM10E/FCM10Efs.
The following splitters and terminators can be used with FCP280 baseplate:
• The Fieldbus Baseplate Terminator (P0916RB) is used to terminate either the CP
end of the HDLC fieldbus or the last 200 Series baseplate in the daisy chain when
Time Strobe or split A/B fieldbus cables are not required.

Figure 6 - Fieldbus Baseplate Terminator (P0916RB)

• For standard baseplates only, Fieldbus Baseplate Terminator/Splitter (RH924ZJ

for Fieldbus port 1, or RH928CY for the Fieldbus port on a standard FCP280
baseplate) allows splitting of the A and B Module Fieldbus signals into different
cables. This splitter can be used to interconnect optional redundant cables
between FCP280 baseplates and 200 Series baseplates. It can also be used to
terminate both the fieldbus and time strobe signals.

14 PSS 41H-1FCP280, Rev. D

Features Field Control Processor 280 (FCP280)

Figure 7 - Fieldbus Baseplate Terminator/Splitters - for FCP280 Baseplates

(RH924ZJ) For standard FCP280 baseplates only

To Fieldbus port on FCP280 baseplate

(RH928CY)

To Module Fieldbus Cable A To Module Fieldbus Cable B

• Time Strobe Fieldbus Baseplate Terminator (RH924ZQ) connects the optional “A”
and/or “B” time strobe signals to the standard FCP280 baseplates only. The Time
strobe splitter/terminator RH924ZQ is used on only the first standard baseplate
containing an FCP280. This terminator also terminates the fieldbus signals.
NOTE: The RH924ZQ adapter is not used with the dual cable FCP280
baseplate.

PSS 41H-1FCP280, Rev. D 15

Field Control Processor 280 (FCP280) Features

Figure 8 - Time Strobe Fieldbus Baseplate Terminator

(RH924ZQ — FCP280 Only)

16 PSS 41H-1FCP280, Rev. D

Features Field Control Processor 280 (FCP280)

• Fieldbus Splitter (RH928CV) allows any of the Fieldbus ports on the standard
FCP280 baseplates to connect to the twinaxial 268 Kbps fieldbus cables.
RH928CV includes both a connector to any of the Fieldbus ports on the FCP280
baseplate, and a termination cable assembly (TCA) termination block similar to
two of the P0903VY termination blocks joined together.

Figure 9 - Extended Fieldbus Splitter for FCP280 Baseplate

(Fieldbus Ports 1-4)

(RH928CV -
FCP280 Baseplate
FCP280 Only)
Fieldbus Port
Connector

3.0 m (9.8 ft)

Termination
Cable Assembly
Termination
Block

Fieldbus B Fieldbus A

PSS 41H-1FCP280, Rev. D 17

Field Control Processor 280 (FCP280) Features

Liquid Crystal Display (LCD)

The FCP280 has a liquid crystal display (LCD) on its faceplate, which displays various
status and identification information:
• The first line typically displays the FCP280’s letterbug and role (Primary/Shadow/
Single)
• The second line displays the FCP280’s part number, hardware revision
information, manufacturing date, OS version, and its status on the Control
Network

LED Indicators
Light-emitting diodes (LEDs) on the front of the FCP280 module provide visual
indication of the:
• FCP280 operational status
• Transmit/receive communications activity of four expanded fieldbus channels,
fieldbus A and B for each
LED indicators on the copper or fiber network adapters provide visual indication for:
• Internal and external power supply health status
• Communications activity to the Control Network A and B links, and to the
FCP280(s)

18 PSS 41H-1FCP280, Rev. D

FCP280 Functional Specifications Field Control Processor 280 (FCP280)

FCP280 Functional Specifications

Processor Type • Control Processor:
ARM® System on a Chip (SOC) with stored programs, using high-speed
communication capability
• Size:
128 MB SDRAM
128 MB flash memory
• Error Detection:
ECC providing single-bit error detection and correction as well as multiple-bit error
detection.
Process I/O Module Fieldbus:
Communications (with • Type:
FBMs)
HDLC
• Transmission Rate:
2 Mbps for 200 Series FBMs or 268 Kbps for 100 Series FBMs
Process I/O Capacity • 200 Series FBMS:
Up to 32 per Expanded fieldbus - up to 128 FBMs over all four Expanded
fieldbuses when used exclusively with 200 Series FBMs. When used with a mix of
100 Series and 200 Series FBMs, up to 128 100 Series FBMs (Y-module) or
competitive devices (such as Foxboro DCS System migration FBMs) with the
remainder of this 128 module limit being 200 Series FBMs, depending on the
Fieldbus loading of the FCP280.
For example, an FCP280 may support 64 100 Series FBMs and 64 200 Series
FBMs (as 64 + 64 = 128) over separate Expanded fieldbuses.
As well, a maximum of 64 100 Series FBMs are allowed on each PIO bus/
baseplate port.
For sizing constraints, see Field Control Processor 280 (FCP280) Sizing
Guidelines and Excel Workbook (B0700FY).
• 100 Series FBMs — Standard FCP280 Baseplates Only:
A maximum of 64 100 Series FBMs are allowed on each PIO bus/baseplate port,
with a total of 128 allowed per FCP280, depending on control processor sizing
constraints (see Field Control Processor 280 (FCP280) Sizing Guidelines and
Excel Workbook (B0700FY)).
• Competitive Migration Modules:
See the device-specific Product Specification Sheets.
Memory Allocation for 15.75 MB for a self-hosted database using Classic Online Image Update (Classic
Blocks OLUG)
19.75 MB for a self-hosted database using Enhanced Online Image Update (EOLUG)
due to flash re-mapping
Maximum Number of The maximum number of control blocks that can be configured for the FCP280 (or fault-
Blocks Configured tolerant FCP280 pair) is 8,000. Seven of these 8,000 blocks are pre-defined, leaving a
total of 7,993 blocks that you can configure for the FCP280. Compounds and ECBs all
count as blocks as well.
Block Executions Per 16,000 blocks/second, maximum
Second
Maximum Number of The number of blocks that can be processed per block processing cycle (BPC) time
Blocks Processed interval depends on scan periods and block type selection. These blocks include all
types (control blocks, ECBs, compounds, data blocks, and so forth). For sizing

PSS 41H-1FCP280, Rev. D 19

Field Control Processor 280 (FCP280) FCP280 Functional Specifications

guidelines, see Field Control Processor 280 (FCP280) Sizing Guidelines and Excel
Workbook (B0700FY).
Minimum Block 50 ms
Processing Cycle (BPC)
Sequence Block Size 32 kB maximum for each block
Maximum Number of 231; 200 connections for source points; 30 connections for sink points; 1 connection for
IPC Connections internal use only.

30 IPC connections 200 IPC connections

FCP280

An IPC connection provides the means to exchange continuous process control

information. A Source point is defined as a connection to a destination device that can
have data sourced by a given CP. Thus an FCP280 can provide data to up to 200
destination stations.
A Sink point is defined as an external point to which the FCP280 can connect to acquire
process control data. The FCP280 can receive continuous updates from up to 30 other
data sources.
Maximum Number of OM 75
Sink Lists
A Sink list is a list of items to be delivered to particular destination. These lists provide
an efficient way to group updates to a given destination.
Maximum OM Scanner 18,000 points for BPC ≥ 200 ms
Database
7,500 points for BPC ≤ 100 ms
The Object Manager (OM) scanner database is the total of all points in the control
scheme for which the CP is scanning and providing updates.
Maximum Number of OM 11,250
Sink Points
The OM sink point limitations refer to the number of points that can be received from
outside sources.
Configurable Block 0.05, 0.1, 0.2, 0.5, 0.6, 1, 2, 5, 6, 10, 30 seconds
Periods
1, 10, 60 minutes
Block Processing Cycle 0.05, 0.1, 0.2, 0.5 and 1.0 seconds, selectable at system configuration time
Time to Marry Fault- Less than 0.5 seconds
Tolerant Modules
Internal Diagnostics Self-checking performed at power-up. Run-time checks and the watchdog timer
function performed during operation.
When FCP280s are configured as an fault-tolerant pair, constant synchronization
checking and message compare operations are also used to detect hardware
occurrences.
Power Requirements • Input Voltage (Redundant):
(FCP280 Module)
24 V DC typical
• Consumption (Single Module with Redundant Network Adapters):
11 W, maximum
• Consumption (Fault-Tolerant Pair with Redundant Network Adapters):
20 W, maximum
Regulatory Compliance, • EMC Directive 2014/30/EU:
Electromagnetic
Meets: EN 61326-1 Class A Emissions and Industrial Immunity Levels.
Compatibility (EMC)

20 PSS 41H-1FCP280, Rev. D

FCP280 Functional Specifications Field Control Processor 280 (FCP280)

Regulatory Compliance, • Underwriters Laboratories (UL) for U.S. and Canada:

Product Safety
Underwriters Laboratories (UL) for U.S. and Canada UL/UL-C listed as suitable for
use in Class I, Groups A-D; Division 2; enclosure based systems when connected
to specified 200 Series Fieldbus Modules as described in the Standard and
Compact 200 Series Subsystem User's Guide (B0400FA). Communications
circuits also meet the requirements for Class 2 as defined in Article 725 of the
National Electrical Code (NFPA No.70) and Section 16 of the Canadian Electrical
Code (CSA C22.1). Conditions for use are as specified in the Standard and
Compact 200 Series Subsystem User's Guide (B0400FA).
• European Low Voltage Directive 2014/35/EU and Explosive Atmospheres (ATEX)
Directive 2014/34/EU:
ATEX (DEMKO) Ex nA IIC T4 Gc certified when connected as described in the
Standard and Compact 200 Series Subsystem User’s Guide (B0400FA). For use
in an enclosure suited for an ATEX Zone 2 classified area.
ABS Type Approved and Bureau Veritas Marine Certification for Environmental
Category EC31.
Regulatory Compliance, • Wurldtech Achilles Certification™ Level 1
Security
• ISASecure™ Certification, EDSA Level 1

PSS 41H-1FCP280, Rev. D 21

Field Control Processor 280 (FCP280) FCP280 Environmental Specifications

FCP280 Environmental Specifications

Operating Storage
Temperature -20 to 60°C (-4 to 140°F) -40 to +70°C (-40 to +158°F)
NOTE: Schneider Electric recommends
the use of the FCP280 vertically-
mounted baseplate (RH924YF) on
vertical DIN rails for more efficient
cooling of the FCP280.
Relative 5 to 95% (Noncondensing) 5 to 95% (Noncondensing)
Humidity
Altitude -300 to +3,000 m (-1,000 to +10,000 ft) -300 to +12,000 m (-1,000 to +40,000 ft)
Contamination Class G3 (Harsh) as defined in ISA Standard, S71.04. No effect on functionality after
simulated 10-year exposure to mixed gas testing per EIA Standard 364-65A, Class III.
The FCP280 has Conformal Coating.
Vibration 0.5 g (5 to 500 Hz)

The environmental limits of this module may be enhanced by the type of enclosure
containing the module. See the applicable Product Specification Sheet (PSS) that
describes the specific type of enclosure to be used.

22 PSS 41H-1FCP280, Rev. D

FCP280 Physical Specifications Field Control Processor 280 (FCP280)

FCP280 Physical Specifications

Configuration Single processor module. The fault-tolerant version consists of two processor modules,
with an interconnecting fault-tolerant connector integral to the baseplate.
Mounting May be placed in device specific 2-position baseplates designed for horizontal or
vertical mounting — see FCP280 Baseplates, page 13.
For the fault-tolerant FCP280, the two modules must be mounted in dedicated slots to
allow for interconnecting fault-tolerant communication.
Dimensions: Module • Height:
105 mm (4.13 in) or 116 mm (4.7 in) including mounting lugs
• Width:
51.8 mm (2.04 in)
• Depth:
147 mm (5.79 in)
Weight (Maximum) 0.8 kg (1.76 lb) for a single, non-fault-tolerant module.
Part Number • FCP280: RH924YA
• FCP280 Horizontal-Mounted Baseplate: RH924YL
• FCP280 Vertical-Mounted Baseplate: RH924YF
• FCP280 Dual Cable Baseplate: (Horizontal or Vertical mount) RH100JX
• Fiber Adapter: RH924WA
• Copper Adapter: RH924UQ
• Splitter Adapters:
◦ Twinaxial Fieldbus Splitter: RH928CV
◦ Redundant Module Fieldbus Cable Adapter:
RH924ZJ - For use when the FCP280 is in the middle of a 200 Series baseplate
chain
RH928CY - Enables the use of redundant module Fieldbus cables between
baseplates to split and terminate the Modular Fieldbus and optional time strobe
signals
◦ Time Strobe Adapter: RH924ZQ
Ethernet Switch to Cabling Connectors:
FCP280 Cabling
• Fiber Adapter:
Two ceramic type LC connectors on one end (for network adapters) with an MT-RJ
connector on the other end (for switch)
• Copper Adapter:
RJ-45 connectors on both ends
Fiber Optic Cable:
• Cable Material:
Multimode fiber (MMF) 62.5/125 µm plenum
• Cable Lengths:
Up to 50 m (164 ft) – Schneider Electric supplied. See “Network Cabling for
FCP280 Network Adapters” in Field Control Processor 280 (FCP280) User’s Guide
(B0700FW) for the appropriate specifications of allowed fiber optic cabling. Greater
than 50 m – user supplied.

PSS 41H-1FCP280, Rev. D 23

Field Control Processor 280 (FCP280) FCP280 Physical Specifications

Ethernet Switch to Fiber Optic Cable (continued):

FCP280 Cabling
• Maximum Length:
(continued)
2 km (6,560 ft) from the Ethernet switch to the FCP280
Copper Cable:
• Cable Material:
1,000 Base-T Cat 5 copper Ethernet cable
• Cable Lengths:
Up to 100 m (328 ft) – Schneider Electric supplied. See “Network Cabling for
FCP280 Network Adapters” in Field Control Processor 280 (FCP280) User’s Guide
(B0700FW) for the appropriate specifications of allowed copper cabling
Greater than 100 m – user supplied
• Maximum Length:
100 m (328 ft) from the Ethernet switch to the FCP280
Cabling — 2 Mbps • FCP280 Fieldbus without FCM2Fs:
Fieldbus
The cable length of each individual Expanded fieldbus cannot exceed 60 m (198 ft)
• FCP280 Fieldbus with FCM2Fs:
Each FCP/FCM drives a segment of interconnected baseplates of up to 60 m (198
ft). Up to four pairs of FCM2Fxs can be used in each individual fieldbus in the
Expanded fieldbus
• FCP280 Fieldbus with FBI200:
The cable length from the FCP280 to FBI200 is up to 305 m (1,000 ft), and the
length from the FBI200 to the last baseplate in the chain is 60 m (198 ft) (this
represents the distance for one HDLC fieldbus in the Expanded Fieldbus)
For additional FBI200 configurations and restrictions, see FBI200 Fieldbus
Isolator/Filter (PSS 41H-2FBI200).
Cabling — 268 Kbps Maximum Length:
Fieldbus(a) • To 200 Series FBMs via FBI200:
Total length of cabling between FCP280 and FBI200 plus the total length of the 2
Mbps Module Fieldbus (for 200 Series FBMs) - 60 m (198 ft) maximum
• To 100 Series FBMs via FBI200:
Between FCP280 and FBI200 - 60 m (198 ft) maximum
From FBI200s to 100 Series FBMs in last mounting structure - 1,830 m (6000 ft)
maximum
• To 100 Series FBMs, Direct Connection:
◦ 2 Mbps and 268 Kbps Mixed Configurations:
From FCP280 to 100 Series FBMs in last mounting structure - 60 m (198 ft)
maximum
◦ 268 Kbps Only Configurations:
From FCP280 to 100 Series FBMs in last mounting structure - 1 Km (3,200 ft)
maximum
• Cable:
Twinaxial, shielded
(a) The FCP280 baseplate Fieldbus ports support direct connection to the 268 Kbps fieldbus via the splitter
(RH928CV).

24 PSS 41H-1FCP280, Rev. D

FCP280 Physical Specifications Field Control Processor 280 (FCP280)

Figure 10 - FCP280 Dimensions

116 mm
4.59 in 105 mm
(including 4.13 in
mounting
lugs)

147 mm
5.8 in

51.8 mm
2.04 in

PSS 41H-1FCP280, Rev. D 25

Field Control Processor 280 (FCP280) FCP280 Baseplate Functional Specifications

FCP280 Baseplate Functional Specifications

Power Requirements
• Input Voltage Range (Redundant):
24 V DC
• Power Cabling Cable Lengths:
0.4 m (16 in) up to 2.1 m (7 ft)
Regulatory Compliance,
• European EMC Directive 2014/30/EU:
Electromagnetic
Compatibility (EMC) Meets: EN 61326-1 Class A Emissions and Industrial Immunity Levels.

Regulatory Compliance,
• Underwriters Laboratories (UL) for U.S. and Canada:
Product Safety
UL/UL-C listed as suitable for use in Class I, Groups A-D; Division 2; temperature
code T4 enclosure based systems. Communications circuits also meet the
requirements for Class 2 as defined in Article 725 of the National Electrical Code
(NFPA No.70) and Section 16 of the Canadian Electrical Code (CSA C22.1).
Conditions for use are as specified in Standard and Compact 200 Series
Subsystem User’s Guide (B0400FA).
• European Low Voltage Directive 2014/35/EU and Explosive Atmospheres (ATEX)
Directive 2014/34/EU:
ATEX (DEMKO) Ex nA IIC T4 Gc certified when connected as described in the
Standard and Compact 200 Series Subsystem User’s Guide (B0400FA). For use
in an enclosure suited for an ATEX Zone 2 classified area.
• Marine Certification:
Bureau Veritas Marine Certification for Environmental Category EC31C.
NOTE: These products are NOT marine certified: Dual Cable FCP280
Baseplate (RH100JX).

26 PSS 41H-1FCP280, Rev. D

FCP280 Baseplate Environmental Specifications Field Control Processor 280 (FCP280)

FCP280 Baseplate Environmental Specifications

Operating Storage
Temperature -20 to +60°C (-4 to +140°F) -40 to +70°C (-40 to +158°F)
Relative Humidity 5 to 95% (Noncondensing) 5 to 95% (Noncondensing)
Altitude -300 to +3,000 m (-1000 to -300 to +12,000 m (-1000 to +40,000 ft)
+10,000 ft)
Contamination (Non- Class G3 (Harsh) as defined in ISA Standard S71.04
Enclosure Mounted)
Contamination Class G3 (Harsh) as defined in ISA Standard S71.04.
(Enclosure Mounted)
Pollution degree 2 as defined in IEC 664-1.

The environmental limits of the 200 Series baseplates may be enhanced by the type
of enclosure containing the 200 Series baseplate. See the applicable Product
Specification Sheet (PSS) that describes the specific type of enclosure to be used.

PSS 41H-1FCP280, Rev. D 27

Field Control Processor 280 (FCP280) FCP280 Baseplate Physical Specifications

FCP280 Baseplate Physical Specifications

Mounting
• DIN Rail:
FCP280 baseplates mount on a non-isolated, mechanically supported vertical DIN
rail, which can be internal to, or external to an enclosure. The FCP280 baseplate
attaches to the DIN rail by means of fasteners
• Rack Mount:
A mounting kit (P0930AS) is available for horizontal mounting of the FCP280
baseplate in a standard, 483 mm (19-inch) rack. This kit provides a 25.4 mm (1
inch) mounting depth.
NOTE: Mounting kit (P0930AS) is not available for the optional dual cable
baseplate.
• Dual Cable Baseplate Mount:
The optional dual cable baseplate has built-in vertical or horizontal DIN rail
mounting supports
Rack Mounting Bracket
• Material:
Steel, Cold-Rolled, 0.0598 mm (16 Gauge)
Mass (Without Modules) ~0.45 kg (1.0 lb)
Size • Height:
120 mm (4.72 in)
• Width:
216 mm (8.5 in)
• Depth:
27.1 mm (1.07 in)
Dual Cable Baseplate • Height:
Size
150 mm (5.90 in)
• Width:
247 mm (9.72 in)
• Depth:
31.5 mm (1.24 in
Construction • Material:
PC and ABS, inflammability UL94 V0
• Color:
Black
Modular Fieldbus
• Cable Lengths:
Cabling
0.125 m (5 in) up to 60 m (198 ft)
• Overall Cable Length:
60 m (198 ft) total allowable cable length

28 PSS 41H-1FCP280, Rev. D

Related Documents Field Control Processor 280 (FCP280)

Related Documents
Document Number Description
PSS 41H-2SOV Standard 200 Series Subsystem Overview
PSS 41H-2W100 100 Series Fieldbus Module Upgrade Subsystem
Overview
PSS 41H-2CERTS Standard and Compact 200 Series I/O - Agency
Certifications
PSS 41H-2FPS400 Standard 200 Series Power Supply
PSS 41H-2W4 Termination Assembly Adapter Modules for 100 Series
Upgrade
PSS 41H-2SBASPLT Standard 200 Series Baseplates
PSS 41H-2FPS Standard 200 Series Power Supplies - FPS240-24 and
FPS120-24
PSS 41H-2W8 100 Series Conversion Mounting Structures
PSS 41H-2COV Compact 200 Series I/O Subsystem Overview
PSS 41H-2CERTS EcoStruxure Foxboro DCS Standard and Compact 200
Series I/O - Agency Certifications
PSS 41H-2C480 Compact Power Supply - FPS480-24
PSS 31H-2Y6 Intrinsically Safe I/O System
PSS 41H-2Y17 FBI200A Fieldbus Isolator/Filter
PSS 41H-2FBI200 FBI200 Fieldbus Isolator/Filter
PSS 41H-2GOV G-Series Enclosures Overview
PSS 41H-7NWEQUIP The Foxboro DCS Control Network Ethernet Equipment
PSS 41S-1TIME Time Synchronization Overview
PSS 41S-3FCPICS Field Control Processor 280 (FCP280) Integrated Control
Software
B0700FY Field Control Processor 280 (FCP280) Sizing Guidelines
and Excel Workbook
B0700FW Field Control Processor 280 (FCP280) User’s Guide
B0400FA Standard and Compact 200 Series Subsystem User's
Guide

PSS 41H-1FCP280, Rev. D 29

 WARNING: This product can
expose you to chemicals
including lead and lead
compounds, which are
known to the State of
California to cause cancer
and birth defects or other
reproductive harm. For more
information, go to
www.p65warnings.ca.gov/.

Schneider Electric Systems USA, Inc.

38 Neponset Avenue
Foxboro, Massachusetts 02035–2037
United States of America

Global Customer Support: https://pasupport.schneider-electric.com

As standards, specifications, and design change from time to time,

please ask for confirmation of the information given in this publication.

© 2012–2020 Schneider Electric. All rights reserved.

PSS 41H-1FCP280, Rev. D