ENGLISH ENGLISH ENGLISH

Installation and Operation Manual

version 1.01

WET OIML
User’s Copy

2004/108/EC (EMC) - 2006/95/EC (LVD)

EC type – approval certificate

N. T7247 revision 1 - NMi (O.N. 0122)
(Directive 90/384/EEC)

Test Certificate
N. TC7605 revision 0 - NMi (O.N. 0122)

ENGLISH ENGLISH ENGLISH

 SYMBOLS

The following symbols are used in this manual to draw the reader's attention to important points:

Caution! Risk of electric shock.

Caution! This operation must be performed by specialist personnel.

Pay particular attention to the following points.

Further information.

GUARANTEE
24 months from the delivery document date. The guarantee covers only defected parts and includes the replacement parts and
labour. All shipping and packing costs are paid by the customer. It is possible to have the repair in guarantee on condition that the
returned product has not been transformed, damaged or repaired without authorization. No guarantee is applicable on returned
products without the original label and/or serial number. No guarantee against misuse.
Batteries: Laumas provides 1 year guarantee from the date of delivery note, against material defects or battery manufacturing faults.

Disposal of Waste Equipment by Users in Private Household in the European Union

This symbol on the product or on its packaging indicates that this product must not be disposed of
with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical
and electronic equipment. The separate collection and recycling of your waste equipment at this
time of disposal will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment. For more information about where you can drop
off your waste equipment for recycling, please contact your local city office, your household waste
disposal service or the reseller.
 TABLE OF CONTENTS

OPERATION........................................................................................................................................ 1

TECHNICAL CHARACTERISTICS..................................................................................................... 1

CONNECTIONS .................................................................................................................................. 3

KEY FUNCTIONS................................................................................................................................ 4

LED FUNCTIONS................................................................................................................................ 5

ERROR MESSAGE ............................................................................................................................. 5

ACCESS TO THE MAIN SETTING MENU ......................................................................................... 6

SEMIAUTOMATIC ZERO.................................................................................................................. 11

SUBTRACTIVE TARE DEVICE ........................................................................................................ 11

DELETING THE SET TARE VALUE................................................................................................. 11

TOTALIZING FUNCTION.................................................................................................................. 12

PIECE COUNTER FUNCTION.......................................................................................................... 12

AVERAGE WEIGHT OF HEADS OF CATTLE................................................................................. 13

NET/GROSS FUNCTION ( MANUAL BATCHING) .......................................................................... 13

SERIAL PROTOCOLS ...................................................................................................................... 14

CONNECTION TO “HDRIP675Y” REMOTE DISPLAY ................................................................... 15

 OPERATION

Four different operating modes selectable :

- WEIGHT INDICATOR
- PIECE COUNTER FUNCTION
- TOTALIZING FUNCTION
- NET/GROSS WEIGHT

Normally once turned on the instrument gets ready for the operation as weight indicator.

TECHNICAL CHARACTERISTICS

Reachargeable internal battery 6V 4Ah (external

Power supply battery charger 230VAC +/- 10%, battery must be
recharged when instrument is turned on )
Operating Temperature -10°C  +40°C (humidity max 85% condensate free)
Storage temperature -20°C  +50°C
Power consumption 12W
Load cell supply 5 VDC 150 mA
Number of load cells in parallel max 4 (350 Ohm) or 8 (700 Ohm)
Internal division max 80000 divisions ( from -2000 + 80000 divis )
Display range - 2000 ; + 999999
Linearity < 0.01% of Full scale
Measure unit kg
Display increments x 1 x 2 x 5 x 10 x 20 x 50
Decimals from 1 to 3
Minimum input signal 1 µV
Measure range – 10mV to + 15 mV
Conversion rate 20 readings / second
Dimensions 245 x 170 x 170 mm
Weight 3 kg
Display Led 6-digit, 7 segments (20mm high)
Keyboard Five-key impermeabile keyboard
Rs 232 for PC connection (monodirectional or
Serial Port
bidirectional transmission) or printer/RD data recorder
Protocol ASCII- n ,8 , 1
Baud rate 1200 , 2400 , 4800, 9600 selectable

-1-
 METRIC OPERATION

Precision class
Number of check divisions Max 3000 Divis on a single weighing range
Minimum impedance load cell 87 ohm
Max impedance load cell 1215 ohm
Input sensitivity 2 µV
Initial zeroing device ≤ 10% of Max
≤ 0.5 Divis / sec. (Total effect of maintaining zero +
Device for maintaining zero
semi-automatic zero ≤4% Max)
Semi-automatic zeroing device ≤2% of Max
Subtractive tare device (semi-
T- ≤ Max
automatic tare)
Connecting cable with junction box Six wire shielded with shield

For correct use we suggest to switch on the instrument about 20 minutes before
using it.

The battery must be recharged when instrument is turned on.

-2-
 5 1
MICROBUTTON
4 WIRES CONNECTION
98 6

6
7
+ EXCITATION

9 +SIGNAL
1
2
- EXCITATION

8 -SIGNAL

5 SHIELD

-3-
CONNECTIONS

LOAD CELL CONNECTOR

ON/OFF
5 1 (9 pin male )
BUTTON
4 2
3
6 + EXCITATION
7 +SENSE
RS232 CONNECTOR 9 +SIGNAL
TX 5 1 - EXCITATION
RX 2 -SENSE
4
GND 1 8 -SIGNAL
POWER CORD
5 SHIELD
 KEY FUNCTIONS

In weight indicator mode, by pressing this key for more than 5 seconds the user
will access the configuration Menu, while pressing this key for less than 5 seconds
the user will access the piece counter function.

In weight indicator mode, by pressing this key, the user can totalize the weight
displayed. In piece counter mode, by pressing this key, the user can set the
quantity of items to sample.

This key allows the user to store the data in the memory while setting the
parameters. It is used also to press the weight.

In weight indicator mode, this key allows the user to tare the weight displayed on
the instrument and display the net weight: the Tare led will light up to indicate
that there is a tare set. To go back to the gross weight display completely unload

the system and press the again.

In weight indicator mode, pressing this key allows the user to totalize the value of
the weight if the value of the weight displayed is less or equal to the amount of
divisions can be set to zero ≤ 2% of Max . The led on Zero will light up to indicate
this status.

AC Low battery Unit:kg WE-T

Count Func Tare Stable Zero

# Func
* Tare Zero

-4-
 LED FUNCTIONS

Count : the symbol lights up when the piece counter function is on.

Func : not used.

* : the symbol lights up when the totalizing function is on.

Tare : the symbol lights up when the net weight is viewed as a consequence of a previously
entered semiautomatic tare

Stable : the symbol lights up when the weight is stable ( this function depends on the values
set in parameters “P11” and “P12”). Necessary condition for the weight datum to be printed and/or
sent via serial connection.

Zero : the symbol lights up when the device shows zero with a deviation ≤ +/- 0.25 e.

Low battery : the symbol lights up when the battery is flat. Please connect the power supply cord
provided to the wall socket (230 VAC).

AC : the symbol lights up when the battery is recharging, that is when the power supply cord is
connected to the wall socket (230 VAC).

ERROR MESSAGE

“Err1” = during the calibration the sample weight is set too low compared to the Cell Full Scale.
“Err2” = during the calibration the zero value is out of range.
“Err3” = when turning on the instrument the zero value is out of range.
“Err4” = in piece counter function, during the sampling, the number of items to sample has been
set to 0.
“Err5” = during the calibration the Full Scale value is set to zero.
“Err6” = in piece counter function, the weight of a unity – item is less than 0.25 divisions.
“Err7” = when the weight value is higher than range of semiautomatic zeroing – zeroing function
disabled.
“Err8” = totalized weight limit has been reached, please deleting the total.
“bAt-lo” = low battery.
“Lo “ = gross weight lower than - 20 e ( divisions).
“ oL “ = the following alarm signal shows followed by an acoustic warning signal if the weight on the
system at the time is higher than the maximum limit set in the FULL parameter or there is a problem
on the load cells, check the load cells connection.

-5-
 ACCESS TO THE MAIN SETTING MENU

In weight indicator mode, press the key for more than 5 seconds to access the setting menu
(“P 1” to “P 12” submenus).

To scroll down the list of submenus and select the submenu, press the key.

To select the parameter values of each submenu, press .

To save the settings and go back to the weight display, press .

SUBMENU LIST
“P 1” Unit of measurement
“P 2” 1 DO NOT USE
“P 3” Serial transmission rate (Baud rate)
“P 4” Serial line transmission
“P 5” Serial transmission type
“P 6” Power saving Standby
“P 7” Zero tracking function
“P 8” Keyboard quick zero-setting range (semiautomatic Zero range)
“P 9” Autozero range at power on or autozero disabled
“P10” Digital weighing filter
“P11” Weight stabilization time
“P12” Balance of the stable weight notification
“P13” Enabling keyboard quick zero setting storage
“P14” Sampling time for average weight of heads of cattle
“P15” Enabling net/gross function

-6-
 P1 X Unit of measurement

1 = kg (standard setting – required value for CE-M approved).

2 = Lb.

P2 1 DO NOT USE

1 = Function disabled.

P3 X Serial transmission rate ( Baud rate)

1 = 9600 bps (standard setting).

2 = 4800 bps.
3 = 2400 bps.
4 = 1200 bps.

P4 X Serial line transmission of the net or gross weight

1 = Net weight.
2 = Gross weight (standard setting).

P5 X Serial transmission type

1 = Serial disabled (standard setting).

2 = Continuous transmission.
3 = Continuous transmission ONLY with stable weight.
4 = Bidirectional transmission.
5 = “HDRIP675Y” remote display connection.
6 = “P190” Printer connection.
7 = “STAV” Printer connection.

-7-
 P6 X Stand by

1 = Function disabled (standard setting).

2 = Function enabled: the power saving function is enabled after about 20 seconds of stable weight
(stable weight led on): the device will be placed in Standby mode and the “–“ symbol will appear on
the display. The weight will be displayed again as soon as the weight on the indicator becomes
unstable.

P7 X Zero tracking function

1 = The display is set to zero with a maximum deviation of 0.5 divisions over zero (required value
for CE-M approved).
2 = The display is set to zero with a maximum deviation of 1 divisions over zero.
3 = The display is set to zero with a maximum deviation of 1.5 divisions over zero.
4 = The display is set to zero with a maximum deviation of 2 divisions over zero.
5 = The display is set to zero with a maximum deviation of 2.5 divisions over zero.
6 = The display is set to zero with a maximum deviation of 3 divisions over zero (standard setting).
7 = The display is set to zero with a maximum deviation of 5 divisions over zero.
8 = Disabled.

P 8 X Keyboard quick zero-setting range (semiautomatic Zero range)

1= 2% Full Scale (standard setting – required value for CE-M approved).

2= 4% Full Scale.
3= 10% Full Scale.
4= 20% Full Scale.

P9 X Autozero range at power on or autozero disabled

1 = 2% Full Scale.
2 = 4% Full Scale (standard setting).
3 = 10% Full Scale (only for CE-M approvable version).
4 = 20% Full Scale (only for CE-M approvable version).
5 = Disabled.

PLEASE SET THIS FUNCTION TO 5 IF THE INDICATOR IS USED WITH A WEIGHING

SYSTEM THAT IS NOT A PLATFORM/SCALE.

-8-
 P10 X Digital weighing filter

1 = High (slow display updating – high-filtered reading) (standard setting).

2 = Medium (medium display updating – medium-filtered reading).
3 = Low (quick display updating – low-filtered reading).

P11 X Weight stabilization time

1 = High (the indicator waits a long-length time before considering the stable weight and lighting up
the relevant led) (standard setting).
2 = Medium (the indicator waits a medium-length time before considering the stable weight and
lighting up the relevant led).
3 = Low (the indicator waits a short-length time before considering the stable weight and lighting up
the relevant led).

P12 X Balance of the stable weight notification

1 = Low (the stable weight led is very sensitive to small variations in weight) (standard setting).
2 = Medium (the stable weight led is medium-sensitive to small variations in weight).
3 = High (the stable weight Led is low-sensitive to small variations in weight).

P13 X Enabling keyboard quick zero setting storage

(semiautomatic zero)

1 = Keyboard quick zero setting storage disabled.

2 = Keyboard quick zero setting storage enabled by pressing at the same time the +

keys (standard setting).

P14 X Sampling time for average weight of heads of cattle

3= sampling time low (standard setting).

4= sampling time medium - low
5= sampling time medium - high
6= sampling time high

-9-
 P15 X Enabling net/gross function ( ONLY FOR INTERNAL USE)

1= Net/gross function enabled.

2= Net/gross function disabled (standard setting – required value for CE-M approved).

Press to save the setting and come back to the weight displaying phase.

The effect of zeroing devices does not change the maximum capacity of the instrument.
You can reset a value of gross weight that is ≤ + / -2% of max capacity (this function will be
lost when turning the instrument off).

- 10 -
 SEMIAUTOMATIC ZERO

 THE FUNCTION IS LOST WHEN TURNING THE INSTRUMENT OFF

While the stable weight is displayed, press in order to set to zero the variations in small
divisions over the zero of the weighing system. The ZERO Led lights up to indicate that the deviation
is ≤ +/- 0.25 e.

Please note that this autozero setting will be reset when turning off the device. When the
device will be restarted, it will display the weight that had been previously set to zero.

 ZERO POINT IS STORED WHEN TURNING THE INSTRUMENT OFF

This function works only with parameter “P13 = 2”

While the stable weight is displayed, press + in order to set the tare to zero
the variations in small divisions over the zero. The ZERO Led lights up to indicate that the deviation
is ≤ +/- 0.25 e. This function won't be lost once the indicator is turned off .

SUBTRACTIVE TARE DEVICE

Please note that this function is to be used only with weighing platforms

Place the item that needs to be set to zero (tare) on the platform and press while the weight is
displayed and the semiautomatic tare will be set. The display then shows the net weight (starting
from 0) and the Tare led lights up to indicate the presence of set tare.
Please note that this tare storage will be reset when turning off the instrument. When the device will
be restarted it will display the weight that had been previously set to zero.

DELETING THE SET TARE VALUE

Remove the item which has been previously set to zero (tare) from the platform: the weight of the

item will be displayed with negative sign. At this point, press to disable the tare function and
set the platform to zero again (the tare led turns off).

- 11 -
 TOTALIZING FUNCTION

While the weight is displayed, the user will be able to totalize the displayed weight provided that the
weight is positive and stable.

Press the button to totalize the displayed weight which will be saved. The * led will light up to
indicate that the totalizing function is on and the totalized weight will remain displayed (locked
weight).
To disable the totalizing function (locked weight) and go back to the weight indicator function, press

the key again.

To totalize another weight value, press the key again: it will be possible only if the indicator
will pass through the zero position.

To set the totalized weight to zero with the device in totalizing mode ( led * on) press and then

press again to go back to the weight display.

To display the totalized weight with an unload weighing system (no items loaded) press the

key and then press to go back to the weight display.

PIECE COUNTER FUNCTION

Check that 0 is displayed (unloaded weighing system).

Load the quantity of items to sample on the weighing system and wait for the stable weight led
(stable) to light up.

Press the key: the message “Count” will be displayed. Then press the key and the
value “C00000” will appear. Now the user needs to set the numeric value corresponding to the

the items loaded on the system by using the key to select the quantity and by pressing the

key to set the numeric value.

Press the key to confirm.

The quantity which has been sampled will be displayed (in number of items) and the Count led will
light up to indicate that the piece counter function is on.

At this point, depending on the system's maximum load, place the load on the weighing system to
know the number of items it consists of.

- 12 -
To go back to the weight indicator function press the key.

To go back to the piece counter function regarding the last sample performed while the system was

on weight display, press and then press the key twice.

AVERAGE WEIGHT OF HEADS OF CATTLE

Load the heads on the platform, press at the same time the keys + , the display shows
the message “---- ctn ----“, from that moment begins the counting of sampling time set, at the end the
display shows the average weight calculated by the system (all LEDs lights up).
To unlock the display and return to weight displaying, unload the scale and press again the keys

+ .

NET/GROSS FUNCTION ( MANUAL BATCHING)

This function allows to perform a manual batching of more products on the scale. Load the first
product on the platform, the display shows the weight of the first product loaded, at this point press

the key, the display shows "0" and the TARE LED lights up to indicate the presence of a

inserted tare. Load the second product on the platform and the press again , the display shows
"0", and so on for the other products.

At the end, keep pressed the key for 5 seconds to come back to the gross weight (total
weight), the TARE LED lights off to indicate the gross weight displaying.

- 13 -
 SERIAL PROTOCOLS
(Menu P5)

Continuous transmission of the weight (x = 2)

Format : WWXXXXXXkg CR LF

Continuous transmission of the weight with stable weight only (x = 3)

Format: WWXXXXXXkg CR LF

PC enquiry transmission (x = 4)

WEIGHT READING

The computer must transmit: R

WET replies with the weight string

Format: WWXXXXXX kg CR LF

ENTERING THE TARE CONTROL

The computer must transmit: T

ENTERING THE ZERO CONTROL

The computer must transmit: Z

Weight printout (x = 6, x =7)

During the weight displaying phase, press to print : date, time, gross weight ( GW) , net weight
(NW) and tare (TW).

Example of printout:

18:22 21-01-08

TW= 45 kg
NW= 15 kg
GW= 30 Kg

The option to make a printout is restricted through the verification of the presence of a stable weight
value (led Stable on).

In case several tares are performed sequentially (tare subtractive device), the printed
tare value (T) will correspond to the sum of each set tare.

- 14 -
 CONNECTION TO “HDRIP675Y” REMOTE DISPLAY

(CABLE INCLUDED IN THE SUPPLY OF REMOTE DISPLAY)

Circular connector Circular connector

WET HDRIP675Y
RED
3--------------------------------------2

BLACK
2--------------------------------------5

LENGTH 10 METERS

- 15 -