Industria Basica is an Argentine company, member of the

Casiba Group, founded in 1952.

As a leading supplier of cable tray support systems, our clients
include the most important industrial companies in Argentina,
many of them members of international groups, related to the
petrochemical, telecommunications, food and datacenters,
industries and public buildings general civil works, have been
installed our line of products in many facilities and countries.

Call our International sales cobtact to obtain more information

about this new product and its application as an alternative
solution for the support of cables, with important savings of Industria Basica Plant
time and cost during the installation. Pilar - Buenos Aires

Our most important customers

- Apex Machine Company - Vantage
- Autotec Inc. - Wagner Powder Systems Inc.
- Avgol - Walt Disney (Textile Services)
- Ced-City of Industry - Western Extralite Company
- Coastal Communication Inc. - Western Technologies Inc.
- Communication Supply Corporation
- Cristal Energy SVCS Inc. International Customers
- Durr Automation Inc.
Argentina:
- Elliott Power Systems
- Yacireta (Hydroelectric Power Station)
- First Security & Sat Systems
- Proyecto Mega (Steam Power at San Nicolás Plant)
- FM Tech Inc.
- Mitsubishi (Gas Duct Station at Loma de la Lata Plant)
- Fontijne Grotnes
- Comision Nacional de Energia Atómica
- Gichner Shelter System
- Graniti Fiandre - Globecomm Systems Inc (Datacenter)
- Hayes Clinical Laboratory - Techint Group
- Jackson County School District - Repsol
- Kiefel - Pluspetrol
- Marquis Electrical Maintenance Ltd. - Procter & Gamble
- Metro Automation - Dow Chemical
- Microimage - Italtel
- Morris Recycling Inc. - Dycasa
- Motors & Controls Corporation
Chile:
- National Security
- Telehouse Chile (Datacenter)
- Pacific Telemanagement Services
- Powercon Corporation Panama:
- Rockaway - Panama Hardware Eng
- Sonic Networks Inc. - Telecom International Panama
- Stanley Services Inc.
- Toyota Motor Corporation Perú:
- Turtle and Hughes Inc. - Centro Atómico de Perú (Nuclear Power Plant)

International Sales:
Horacio Petrera | Phone: +1 (646) 485-9649 | Fax: +1 (408) 351-9469
hpetrera@[Link]

INDUSTRIA BASICA S. A.
Dr. A. Sabattini 5294 Caseros (B1678CQR) Buenos Aires, Argentina | Tel.: + 5411-4512-7555 | Fax: + 5411-4512-7556
info@[Link] | [Link]

2
General overview Flat fittings
The cable tray is manufactured from galvanized mill steel. Joining straight sections to fittings is performed in the
C lickAndGo's unique advantage is that its design allows for same fashion with the exception that splice plates
sectional fitting / assembly without using any nuts, bolts or
are not required.
tools *.
*= Versatile design does permit their use if so desired. All The fittings themselves are designed to act as splice plates.
dimensions expressed in S I (metric) are mandatory. Values The fittings come flat and are hand folded in the field,
expressed in feet or inches are approximate.
as illustrated (model 90 HB shown).

Competitive advantages
ClickAndGo Perforated Bottom Cable Trays' competitive
advantages over conduit include the following:

SAFETY: Unlike conduit, ClickAndGo Perforated Bottom

Cable Trays do not provide a significant path for
transmission of corrosive, explosive or toxic gases and
liquids, avoiding plant personnel and sensitive
equipment from being exposed to these elements.

EASY CABLE INSTALLATION, INSPECTION AND

REPAIR: The ClickAndGo Perforated Bottom Cable Tray
system is designed for quick and easy new cable
installation, inspection and repair.

REDUCED INSTALLATION COSTS=SAVINGS: As

previously stated, ClickAndGo Perforated Bottom Cable
Trays are normally erected without nuts, bolts or tools,
resulting in reduced installation costs = savings. The
fittings come flat and are hand folded in the field at time of
installation, eliminating the need for costly field
fabrication.
An additional benefit of this design is reduced freight and
warehousing / storage costs.

GREATER LOADING CAPACITY: ClickAndGo

Perforated Bottom Cable Trays also provide a greater
cable loading capacity with minimal additional cost
compared to conduit, the latter requiring higher strength
supports.

SIMPLER DESIGN: Conduit systems require many more

different components.
The ClickAndGo Perforated Bottom Cable Tray system is
SIMPLE and offers the same or greater capacity utilizing
far fewer components.

3
Installation guidelines Material Specifications
Installing ClickAndGo PERFORATED BOTTOM CABLE TRAYS is ClickAndGo PERFORATED BOTTOM CABLE TRAYS are
very QUICK and SIMPLE !! manufactured from 0.89 mm. thickness galvanized mill
Simply join straight sections with the uniquely designed splice carbon steel, in accordance with ASTM A 653 G 90 coating
plates, which embrace the sections from top to bottom (1). specifications.
Once the straight sections and splice plates are correctly
positioned, apply hand pressure to the metal and plastic
clips (2) and: “CLICK” YOU'RE DONE !! (3).

U.L. Classification
ClickAndGo PERFORATED BOTTOM CABLE TRAYS are
1 classified by Underwriters Laboratories Inc. as to their
suitability as an equipment grounding conductor only. The
individual sections are designed for the use of jumper wires
in order to meet the NEC 392.7 grounding requirements.
They have been classified as to their suitability for use as
equipment grounding conductors in accordance with
Sections 392.3 (C) and 392.7 (B) NEC 2002.
All straight section are grounded and labelled as U.L.
classified .

Load span
2 An individual cable tray's load strength is proportionate to the
length of its unsupported span, commonly referred to as
'support span'. The support span should not exceed the
length of an un-spliced straight section, to ensure that no
more than one splice is placed between supports. The
maximum recommended support span is 8 feet (240 mm) for
straight sections. Fittings should be installed in accordance
with NEMA Standards VE-2.

Applications
ClickAndGo PERFORATED BOTTOM CABLE TRAYS
3 are an ideal substitute for conduit, specially in indoor
installations / applications such as:

Telecommunications. Food Processing Plants.

Fiber Optics. Manufacturing Plants.
Raised Access Floors. Shopping Malls.
Instrumentation Data Centers.
and lightning wiring.
Schools & Hospitals.
Industrial Equipment.
Public Buildings.
Communications
Closets.

IMPORTANT WARNING
Cable trays are designed to be used as a support for cables, and not intended or designed to be used
as personnel walkways, ladders or supports.

4
Straight Section
ST Width Codes
2" (50 mm.) ST2
4" (100 mm.) ST4
6" (150 mm.) ST6
10´ (3000 mm.) 8" (200 mm.) ST8
12" (300 mm.) ST12
18” (450 mm.) ST18
24” (600 mm.) ST24

Splice Plate Splice Plate 2

SP 4/12 SP 2

For widths between 4” (100 mm.)

and 12” (300 mm.) Used exclusively for the
straight sections and the vertical bends.
Required clips are provided with each component.

ClickAndGo! System Used exclusively for 2” (50 mm.) straight

sections and vertical bends.
Required clips are provided
with each component.

Horizontal Bend 45º Horizontal Bend 90º

45HB 90HB

Width Codes Width Codes

Required clips 2" (50 mm.) 45HB2 Required clips 2" (50 mm.) 90HB2
are provided 4" (100 mm.) 45HB4 are provided 4" (100 mm.) 90HB4
with each component. 6" (150 mm.) 45HB6 with each component. 6" (150 mm.) 90HB6
8" (200 mm.) 45HB8 8" (200 mm.) 90HB8
12" (300 mm.) 45HB12 12" (300 mm.) 90HB12
18” (450 mm.) 45HB18 18” (450 mm.) 90HB18
24” (600 mm.) 45HB24 24” (600 mm.) 90HB24

5
TEE 90º Cross 90º
T X

Width Codes Width Codes

2" (50 mm.) T2 2" (50 mm.) X2
4" (100 mm.) T4 4" (100 mm.) X4
Required clips 6" (150 mm.) T6 Required clips 6" (150 mm.) X6
are provided 8" (200 mm.) T8 are provided 8" (200 mm.) X8
with each component. 12" (300 mm.) T12 with each component. 12" (300 mm.) X12
18” (450 mm.) T18 18” (450 mm.) X18
24” (600 mm.) T24 24” (600 mm.) X24

Deviations (left & right) Vertical Bend

RD / LD VB

Required clips Right Left

are provided Width Deviation Deviation
Codes Codes Width Codes
with each
component. 2" (50 mm.) RD2 LD2 2" (50 mm.) VB2
4" (100 mm.) RD4 LD4 4" (100 mm.) VB4
6" (150 mm.) RD6 LD6 6" (150 mm.) VB6
8" (200 mm.) RD8 LD8 8" (200 mm.) VB8
12" (300 mm.) RD12 LD12 Required clips are provided 12" (300 mm.) VB12
18” (450 mm.) RD18 LD18 with each component. 18” (450 mm.) VB18
24” (600 mm.) RD24 LD24 24” (600 mm.) VB24
RIGHT LEFT

Reduction Fitting Central Complementary Accesory

RFC CA

Width Codes
Width Codes Accesory used for
the union of fittings. 2" (50 mm.) CA2
4" to 2" (100 mm to 50 mm) RFC 4/2 4" (100 mm.) CA4
Required clips 6" to 4" (150 mm to 100 mm) RFC 6/4 6" (150 mm.) CA6
Required clips
are provided 8" to 6" (200 mm to 150 mm) RFC 8/6 8" (200 mm.) CA8
are provided
with each 12" to 8" (300 mm to 200 mm) RFC 12/8 12" (300 mm.) CA12
with each component.
component. 18” to 12” (450 mm to 300 mm) RFC 18/12 18” (450 mm.) CA18
24” to 18" (600 mm to 450 mm) RFC 24/18 24” (600 mm.) CA24

6
Covers Separators
CST SEP

Width Codes
2" (50 mm.) CST2
4" (100 mm.) CST4
Each cover is provided 6" (150 mm.) CST6 The separator material is galvanized
with two fasteners 8" (200 mm.) CST8 mill carbon steel, 0,89 mm. of thickness.
for each ending. 12" (300 mm.) CST12 Four fasteners are provided with each separator.
18” (450 mm.) CST18 No tooling required (hand fixed).
24” (600 mm.) CST24

Floor Support
FS Support suitable to under floor installations.

Width Codes

2" & 4" (50 mm & 100 mm) FS 2/4

6" - 8" - 12" (150 mm - 200 mm - 300 mm) FS 6/12
18" - 24" (450 mm - 600 mm) FS 18/24

Brackets Trapeze
BR Width Codes TRD Width Codes
6" (150 mm.) BR6 4" (100 mm.) TRD4
8" (200 mm.) BR8 6" (150 mm.) TRD6
12" (300 mm.) BR12 8" (200 mm.) TRD8
18” (450 mm.) BR18 12" (300 mm.) TRD12
24” (600 mm.) BR24 18” (450 mm.) TRD18
24” (600 mm.) TRD24
Material:
Galvanized,
mill carbon steel Material:
3 mm. thickness. Carbon Steel,
3 mm. thickness,
hot-dip galvanized.

TRS Width Codes

Width Codes
2" (50 mm.) TRS2
2" (150 mm.) BR2 4" (100 mm.) TRS4
4" (200 mm.) BR4 6" (150mm.) TRS6
8" (200 mm.) TRS8
Material: Carbon Steel,
2 mm. thickness,
hot-dip galvanized.
Material: Galvanized mill
carbon steel, 3 mm.
thickness.

7
 1 Straight Section 6 Vertical Bend

2 Splice Plate 7 Tee

3 ClickAndGo System 8 Cross

4 Horizontal Bend 90° 9 Bracket

5 Horizontal Bend 45° 10 Trapeze

Width 12” (300 mm.)

These are the results of the load tests for a width of 300 mm. (12 inches) according to NEMA VE 1
with supports span distance of 2,44 m.

LOAD DEFLECTION DEFLECTION

Kg./m Lbs./m (inches) (mm.)

0 0 0 0
6,69 14,75 0,072 1,83
13,37 29,48 0,133 3,38
20,06 44,22 0,188 4,78
26,75 58,97 0,243 6,17
33,41 73,66 0,301 7,64
40,13 88,47 0,346 8,79
46,88 103,35 0,389 9,89
53,51 117,97 0,437 11,11
60,2 132,72 0,486 12,35

Brochure contents subject to change without prior notice.

For the most current information please refer to the website at [Link]

[Link]
Rev. 4-06 8