Welcome to download the Newest 2passeasy C1000-132 dumps
[Link] (118 New Questions)
Exam Questions C1000-132
IBM Maximo Manage v8.0 Implementation
[Link]
Passing Certification Exams Made Easy visit - [Link]
Welcome to download the Newest 2passeasy C1000-132 dumps
[Link] (118 New Questions)
NEW QUESTION 1
What is the default status in the Quick Reporting Application?
A. INPRG
B. APPR
C. DRAFT
D. ENTERED
Answer: A
Explanation:
The default status in the Quick Reporting Application in IBM Maximo Manage is DRAFT.
NEW QUESTION 2
In which Maximo application can Workflow Delegation be set?
A. People
B. Person Group
C. Workflow Administration
D. Labor
Answer: A
NEW QUESTION 3
In which three areas of Maximo can an inspection form be referenced to generate an Inspection result? (Choose three.)
A. Work Order
B. Ticket Template
C. Route Stop
D. Service Request
E. Job Plan Task
F. Preventive Maintenance
Answer: ACE
NEW QUESTION 4
What can be done when decommissioning a location that cannot be done when decommissioning an asset?
A. Roll New Status down to All Assets in All Changed Locations?
B. Remove All Reference to This Location from All Contracts?
C. Remove All References to This Location from All Job Plans?
D. Delete Associated Service Addresses That will be made Redundant?
Answer: A
Explanation:
When decommissioning a location in IBM Maximo Manage, you can roll the new status down to all assets in all changed locations. This cannot be done when
decommissioning an asset.
NEW QUESTION 5
Which application in the IBM Maximo Application Suite can be used to perform criticality scoring?
A. Maximo Supervision
B. Maximo Manage
C. Maximo Prevent
D. Maximo Health
Answer: D
Explanation:
The Maximo Health application in the IBM Maximo Application Suite can be used to perform criticality scoring.
NEW QUESTION 6
Which field on a Work Order is used to only schedule work during working time?
A. Flow Action Assist
B. Split Shift
C. Constrain to Shift
D. Interruptible
Answer: D
NEW QUESTION 7
In the Inventory Usage application when the type is TRANSFER, if a user changes the status to COMPLETE what type of transaction record is created?
Passing Certification Exams Made Easy visit - [Link]
Welcome to download the Newest 2passeasy C1000-132 dumps
[Link] (118 New Questions)
A. Transaction Type RETURN in MATUSETRANS table
B. Transaction Type ISSUE in MATUSETRANS table
C. Transaction Type SHIPTRANSFER in MATRECTRANS table
D. Transaction Type TRANSFER in MATRECTRANS table
Answer: D
Explanation:
[Link]
NEW QUESTION 8
A client has a requirement to manage access permits and risk assessments in Maximo. Which add-on provides this capability?
A. Maximo Safety
B. Maximo Health Safety and Environment
C. Maximo Asset Configuration Manager (ACM)
D. Maximo Spatial
Answer: B
NEW QUESTION 9
Which statement is true regarding Master Preventative Maintenance (PM) records?
A. Associated PM records can only be created for a rotating item's asset.
B. Associated PM records can be created for a Master PM which does not have an item
C. Associated PM records are temporary and expire after 90 days.
D. Associated PM records can only be created for a rotating item's location.
Answer: B
Explanation:
Regarding Master Preventative Maintenance (PM) records in IBM Maximo Manage, associated PM records can be created for a Master PM which does not have
an item.
NEW QUESTION 10
Which Maximo application can be used to generate replacement plans for assets?
A. Maximo Predict
B. Maximo Health
C. Maximo Health, Safety and Environmental (HSE)
D. Maximo Manage
Answer: B
Explanation:
IBM Maximo Health, part of the Maximo Application Suite, is specifically designed to enable comprehensive asset performance monitoring, including the capability
to generate replacement plans for assets. With Maximo Health, users can assess an asset's remaining useful life, criticality, and health scores to make data-driven
decisions about whether to repair, refurbish, or replace an asset.
Key features in Maximo Health that facilitate replacement planning include:
? Expected Life and Replacement Planning: Users can evaluate assets approaching the end of their lifecycle. For assets flagged for replacement or nearing their
projected end of life, Maximo Health offers views like the "Expected Life" or "Plan Costs" to initiate a replacement plan. This process allows for strategic planning of
asset replacements to ensure operational reliability and cost-effectiveness
IBM GitHub
Maximo Health integrates data from asset condition monitoring, usage history, and criticality analysis, allowing for a proactive approach to asset management and
enabling organizations to optimize maintenance budgets by planning replacements only when necessary. Thus, option B (Maximo Health) is the correct answer.
NEW QUESTION 10
What are two of the filters in the Select Value of a Location or Asset in the Service Requests application?
A. Public
B. Service Address
C. Service Group/Services
D. User/Custodians
E. Work Zones
Answer: BC
Explanation:
Two of the filters in the Select Value of a Location or Asset in the Service Requests application in IBM Maximo Manage are Service Address and Service
Group/Services.
NEW QUESTION 15
What item status in the Inventory application is needed to receive a purchased item into inventory?
A. PENDING
B. APPROVED
C. ACTIVE
Passing Certification Exams Made Easy visit - [Link]
Welcome to download the Newest 2passeasy C1000-132 dumps
[Link] (118 New Questions)
D. PLANNING
Answer: C
NEW QUESTION 16
Which data storage level provides the sharing of items and company data across multiple organizations?
A. SET
B. SITE
C. ORG
D. SYSTEM
Answer: A
NEW QUESTION 19
A Service Level Agreement is defined at the System level. What is the purpose of the Organization and Site fields?
A. They are used to filter the SLAs which a user can see based on Security Group Site access.
B. They are used to filter the SLAs that can be associated with a Contract.
C. They are used to filter the SLAs that can be included as Related SLAs.
D. They are used to filter the SLAs that could be applied to the object.
Answer: D
NEW QUESTION 23
What is the purpose of the Admin mode?
A. change System Properties without needing to shut down the Maximo server
B. perform Database Configuration without needing to shut down the Maximo server
C. apply changes in Application Designer
D. perform administrative functions
Answer: D
Explanation:
The purpose of Admin mode in IBM Maximo Manage is to allow users to perform Database Configuration without needing to shut down the Maximo server.
NEW QUESTION 28
Which statement is true regarding Work Assets in the Safety Plans application?
A. A Work Asset is either a Location or an Asse
B. A user does not need to specify Work Assets, as a Safety Plan can be applied without it.
C. A Work Asset is either a Location or an Asse
D. A user needs to specify at least one of these for each record.
E. A Work Asset is either a Rotating Item, a Location, or an Asse
F. A user needs to specify at least one of these for each record.
G. A Work Asset is either an Asset, Asset Type, or a Locatio
H. A user does not need to specify Work Assets, as a Safety Plan can be applied without it.
Answer: A
Explanation:
In the Safety Plans application, a Work Asset is either a location or an asset that requires the safety plan. Each safety plan record must have at least one work
asset specified, and the work asset can be a location or an asset.
NEW QUESTION 33
Which two domain types can have a specified error message?
A. SYNONYM
B. NUMERIC
C. TABLE
D. CROSSOVER
E. ALN
Answer: D
Explanation:
In IBM Maximo Manage, the two domain types that can have a specified error message are TABLE and ALN.
NEW QUESTION 36
How does a user make a GL account inactive in the Chart of Accounts application?
A. populate the Expiration Date with a value in the past
B. select action Add/Modify GL Account
C. deselect the Active checkbox
D. select action Change Status
Passing Certification Exams Made Easy visit - [Link]
Welcome to download the Newest 2passeasy C1000-132 dumps
[Link] (118 New Questions)
Answer: A
NEW QUESTION 37
In the Assets application when reporting downtime, what is an example of a Downtime Type?
A. Starting Up
B. Line Change Over
C. Shutting Down
D. Non-Operational
Answer: D
NEW QUESTION 39
Which three Safety Module applications require a Site (SITEID) to be defined for each record? (Choose three.)
A. Accident Reporting
B. Danger Zones
C. Tag Outs
D. Safety Plans
E. Hazards
F. Precautions
Answer: CDF
NEW QUESTION 42
In which application can a user view a history of changes made to attributes in the Specifications tab?
A. Locations
B. Item Master
C. Purchase Orders
D. Assets
Answer: D
NEW QUESTION 44
A user wishes to perform the same work tasks on several assets simultaneously. How can this be configured?
A. A Route should be created with each stop being one Asset and the Job Plan associated with the Route record.
B. A Master Job Plan should be created with Tasks for each Asset.
C. A Work Order Hierarchy should be created against the same Job Plan used for all stops.
D. The Assets should be specified on the Multiple Assets, Locations and CIs table on the Work Order.
Answer: D
Explanation:
In IBM Maximo Manage, when the same work tasks need to be applied simultaneously to multiple assets, the recommended method is to use the Multiple Assets,
Locations, and CIs table on a single Work Order. This approach allows users to specify multiple assets for the work order without creating separate child work
orders or task hierarchies, streamlining record management and reducing complexity.
? Multiple Assets, Locations and CIs Table: This table allows the user to list all
assets requiring the same work on a single work order. When tasks are defined on
the work order, they apply uniformly across all assets listed in this table. This method is efficient for routine inspections, simple tasks, or other repetitive
maintenance where the same task applies to multiple assets
? Routes as an Alternative: A route could also be configured so that each route stop (representing different assets or locations) populates the Multiple Assets,
Locations, and CIs table on a single work order when applied. This allows for sequence control and record management while still using a single main work order
This setup minimizes the need to manage multiple child work orders or complex work order hierarchies, particularly when performing similar tasks on several
assets simultaneously.
NEW QUESTION 45
Which two records can be included as a contract line item on a Lease/Rental Contract?
A. Non-Rotating Asset
B. Rotating item
C. Asset
D. Tool
E. Non-Rotating item
Answer: AB
Explanation:
In IBM Maximo Manage, two records that can be included as a contract line item on a Lease/Rental Contract are a Rotating item and an Asset.
NEW QUESTION 47
How can an asset be moved from one location to another in a different organization using the Assets application?
A. The asset must be recreated manually in the target organization.
B. Use the action Move/Modify Assets.
Passing Certification Exams Made Easy visit - [Link]
Welcome to download the Newest 2passeasy C1000-132 dumps
[Link] (118 New Questions)
C. Use the action Transfer Asset.
D. Use the action Create Change from Asset.
Answer: B
NEW QUESTION 52
In what Maximo Manage application are the specifications of an asset for calibration entered?
A. Classifications
B. Asset
C. Data Sheet Template
D. Improvements
Answer: C
Explanation:
In IBM Maximo Manage, the specifications of an asset for calibration are entered in the Data Sheet Template application.
NEW QUESTION 54
At which data storage level are locations, assets and storerooms defined?
A. Set
B. Site
C. System
D. Organization
Answer: B
Explanation:
Locations, assets and storerooms are defined at the Site level in IBM Maximo Manage.
NEW QUESTION 59
Which limit is used to trigger a Condition Monitoring Point with a GAUGE Meter Type?
A. Meter Limit
B. Warning Limit
C. Measurement Limit
D. Action Limit -
Answer: D
Explanation:
In IBM Maximo Manage, the Action Limit is used to trigger a Condition Monitoring Point with a GAUGE Meter Type.
NEW QUESTION 62
When a Service Level Agreement is applied to a WORKORDER object, what Commitment Type will be missing from the lookup?
A. DOWNTIME
B. DELIVERY
C. AVAILABILITY
D. CONTACT
Answer: D
Explanation:
When a Service Level Agreement (SLA) is applied to a WORKORDER object in IBM Maximo Manage v8.0 implementation, the Commitment Type that will be
missing from the lookup is DELIVERY. The other possible Commitment Types in Maximo Manage are DOWNTIME, AVAILABILITY, and CONTACT.
NEW QUESTION 66
In the Work Order Tracking application when the Create Work Order action is used, what occurs on the follow-up Work Order?
A. The Asset and Location fields are cleared.
B. The Originating Record field is populated.
C. The Work Type field is cleared.
D. The Status is set to INPRG.
Answer: B
NEW QUESTION 69
What are three available associations in the Hazards application?
A. Lock Outs
B. Material Safety Data Sheets (MSDS)
C. Hazardous Materials
D. Tag Outs
E. Precautions
Passing Certification Exams Made Easy visit - [Link]
Welcome to download the Newest 2passeasy C1000-132 dumps
[Link] (118 New Questions)
F. Safety Plans
Answer: CDE
Explanation:
The Hazards application in IBM Maximo Manage v8.0 allows users to associate Material Safety Data Sheets (MSDS), Hazardous Materials, and Precautions with
a particular hazard. These associations help in managing safety information related to
hazards and in ensuring compliance with safety regulations.
NEW QUESTION 74
What are the three default values used with the position of a Crew Type or Crew?
A. Helper
B. Supervisor
C. Driver
D. Leader
E. Apprentice
F. Technician
Answer: ADE
Explanation:
In IBM Maximo Manage v8.0 implementation, the three default values used with the position of a Crew Type or Crew are Helper, Leader, and Apprentice. These
values represent the different roles that members of a crew can assume.
NEW QUESTION 75
In which application can a Contract property default be set for a specific contract type, for example Is early termination allowed by the Customer?
A. Database Configuration
B. Organizations
C. System Properties
D. Contract Administration
Answer: B
Explanation:
The Contract Administration application is used to set contract property defaults for specific contract types. For example, you can set whether early termination is
allowed by the customer for a specific contract type.
NEW QUESTION 76
Apart from Standard and Average, what other three costing methods can be used in the Inventory application?
A. FIFO
B. FILO
C. Asset
D. LIFO
E. Weighted Average
F. LILO
Answer: ACD
Explanation:
Apart from Standard and Average costing methods in IBM Maximo Manage??s Inventory application, three other costing methods that can be used are FIFO
(First In First Out), LIFO (Last In First Out) and Weighted Average.
NEW QUESTION 81
On a Work Order with no GL Account specified, which GL Account will take precedence?
A. Work Order Control Account
B. Job Plan
C. Asset
D. Location
Answer: C
NEW QUESTION 84
What must first be done in order to apply a price adjustment to an Approved Labor Rate Contract?
A. Use Edit History Contract from the More Actions menu.
B. The contract should be revised.
C. The contract should be suspended.
D. Change the contract status to closed.
Answer: B
NEW QUESTION 86
Passing Certification Exams Made Easy visit - [Link]
Welcome to download the Newest 2passeasy C1000-132 dumps
[Link] (118 New Questions)
What are two of the filters in the Select Value of a Location or Asset in the Service Requests application?
A. Public
B. Service Address
C. Service Group/Services
D. User/Custodians
E. Work Zones
Answer: AD
Explanation:
Two of the filters in the Select Value of a Location or Asset in the Service Requests application in IBM Maximo Manage are Service Address and Service
Group/Services
[Link] lookup-create-service-request-application
NEW QUESTION 91
In the Inventory Usage application, which three statuses will activate the Split Usage Quantity feature? (Choose three.)
A. CANCELED
B. RETURNED
C. ENTERED
D. STAGED
E. COMPLETE
F. SHIPPED
Answer: DEF
NEW QUESTION 94
In the Automation Scripts application, which launch point can be triggered?
A. Formula
B. Escalation
C. Integration
D. Cron Task
Answer: C
Explanation:
In the IBM Maximo Automation Scripts application, several types of launch points can be configured to trigger scripts, including Integration launch points. The
supported launch points in Maximo are:
? Object Launch Point: Triggers on events related to specific objects (MBOs), such
as creation, modification, or deletion
? Attribute Launch Point: Triggers when specific attributes within an MBO are accessed or modified
? Action Launch Point: Executes custom actions, often triggered by workflows or escalations, allowing for automation without custom Java code
? Condition Launch Point: Activates when a defined condition is met, commonly used for security or workflow condition logic
? Integration Launch Point: Designed specifically to interact with Maximo Integration Framework (MIF) components, including publish channels, enterprise
services, and invocation channels. This enables automation scripts to respond to data exchanges between Maximo and external systems, making it a powerful tool
for integration-related automations
The Integration launch point is thus the correct answer as it allows scripts to be triggered by data flow events through MIF.
NEW QUESTION 98
Which two search types can be found on an attribute in the Database Configuration application when using an Oracle or SQL Server database? (Choose two.)
A. INDEXED
B. NONE
C. FUNCTION
D. HIERARCHY
E. TEXT
Answer: BE
NEW QUESTION 102
When creating a labor record, what must be associated with it?
A. User Record
B. Person Record
C. Crew
D. Supervisor
Answer: B
Explanation:
When you create a labor record in IBM Maximo Manage v8.0, you enable a person to report time against a work request1. Before you create a labor record, you
must create a corresponding person record1. A person record is defined at the System level and when a person works across multiple organizations, they need
multiple Labor records linked to the same Person record2.
NEW QUESTION 107
In the Work Order Tracking application, when using the Select Value on the Safety Plans field from where can the safety plan be derived?
Passing Certification Exams Made Easy visit - [Link]
Welcome to download the Newest 2passeasy C1000-132 dumps
[Link] (118 New Questions)
A. Safety Plans that are referenced in the Location Hierarchy.
B. The Safety Plan that is associated with the Preventive Maintenance record.
C. It always shows Active Safety Plans that are in the same site as the work order.
D. Safety Plans where the Location or Asset on the Work Order is referenced as a Work Asset on the Safety Plan.
Answer: D
NEW QUESTION 112
What are two depreciation methods available in the Assets application? (Choose two.)
A. LIN - Linear
B. METER - Meter units over expected life
C. SUMYEAR - Sum of the Years Digits
D. DDB - Double Declining Balance
E. SL - Straight Line
Answer: DE
NEW QUESTION 115
......
Passing Certification Exams Made Easy visit - [Link]
Welcome to download the Newest 2passeasy C1000-132 dumps
[Link] (118 New Questions)
THANKS FOR TRYING THE DEMO OF OUR PRODUCT
Visit Our Site to Purchase the Full Set of Actual C1000-132 Exam Questions With Answers.
We Also Provide Practice Exam Software That Simulates Real Exam Environment And Has Many Self-Assessment Features. Order the
C1000-132 Product From:
[Link]
Money Back Guarantee
C1000-132 Practice Exam Features:
* C1000-132 Questions and Answers Updated Frequently
* C1000-132 Practice Questions Verified by Expert Senior Certified Staff
* C1000-132 Most Realistic Questions that Guarantee you a Pass on Your FirstTry
* C1000-132 Practice Test Questions in Multiple Choice Formats and Updatesfor 1 Year
Passing Certification Exams Made Easy visit - [Link]
Powered by TCPDF ([Link])
