Scribd
Upload
130 views1 page

Electrical Duct Bank Checklist

The document is a checklist for the installation of electrical duct banks (HDPE/UPVC) for the Waad Al Shamal project, managed by MODON and executed by Saudi Zaas Construction Company. It includes a series of inspection points to ensure compliance with approved methods, materials, and safety protocols. The checklist is intended for use by both the contractor and the supervision consultant, with a status section to indicate acceptability of each item checked.

Uploaded by

mubaidullahkhan94
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
130 views1 page

Electrical Duct Bank Checklist

The document is a checklist for the installation of electrical duct banks (HDPE/UPVC) for the Waad Al Shamal project, managed by MODON and executed by Saudi Zaas Construction Company. It includes a series of inspection points to ensure compliance with approved methods, materials, and safety protocols. The checklist is intended for use by both the contractor and the supervision consultant, with a status section to indicate acceptability of each item checked.

Uploaded by

mubaidullahkhan94
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

CHECK LIST

20 READY BUILT FACTORIES& 12 SUPPORT UNITS-


CLIENT MODON
Project Name WAAD AL SHAMAL
PMC CONSOLIDATED CONSULTANT GROUP (CCG)

Contractor SAUDI ZAAS CONSTRUCTION COMPANY

Related ITP WAS1-05-004-SZC-QUM-ITP-0012_00


Checklist Title: CHECKLIST FOR Electrical Duct bank (HDPE/UPVC)
Related MST WAS1-05-004-SZC-QUM-MST-0012_01

READY BUILT FACTORIES AND SUPPORT UNITS Related FIR WAS1-05-004-SZC-ELE-FIR-0299_00


Works Location:

Status - Acceptable
SN Description of checking to be carried out Remarks
Yes No NA

1 Approved Method Statement obtained from Employer/Engineer.

2 Material is an approved product.


3 Check all the installation as per Approved shop drawings.

4 Check for underground utilities and clearances.

5 Confirm the quantity and quality of HDPE/UPVC ducts.

6 Ensure the trench bottom is free of rocks and debris

7 Place duct spacers as required to maintain spacing between ducts.

8 Verify that no damage occurred during installation.

9 Ensure all workers are trained in safety protocols.

10 Are sufficient pull boxes provided in horizontal runs and facilitate wiring?

Sleeves provided when exposed conduits are passing through slabs /


11
walls, etc?
Are all openings sealed with mastic compound / fire-rated sealant for fire
12
walls?
13 Check the junction boxes for location as per drawing.
Remarks:

For Contractor For Supervision Consultant (PMC)

Name Aleem Akhtar

Designation QA/QC Engineer

Signature

Date

You might also like