PARTS LIST
ITEM QTY PART NO. PART DESCRIPTION LENGTH UNIT WT. NET WT.
1 2 X-HHR-HANGH 1'' MILL PLATE (A572 GR50) 12 in 1.14 2.29
2 2 X-HHR-HANGL 1/2'' MILL PLATE (A572 GR.50) 12 in 1.34 2.68
3 2 G1203 1/2" x 3" HDG HEX BOLT GR5 FULL THREAD 3 in 0.22 0.43
4 4 G12FW 1/2" HDG USS FLATWASHER 3/32 in 0.03 0.14
5 2 G12LW 1/2" HDG LOCKWASHER 1/8 in 0.01 0.03
6 2 G12NUT 1/2'' HDG HEAVY 2H HEX NUT 0.07 0.14
TOTAL WT. # 5.71
4X2
ORDER 5
PART# SHK14
SEPARATELY 6
4X2
1 5
FINISH:
HOT DIP GALVANIZED.
TOLERANCE NOTES DESCRIPTION
TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE: Engineering
SAWED, SHEARED AND GAS CUT EDGES (± 0.030") PORT HOLE HANGER KIT Support Team:
DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES 1-888-753-7446
LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES valmont
BENDS AND ANGLES ARE ± 1/2 DEGREE
ALL OTHER MACHINING (± 0.030") CPD NO. DRAWN BY ENG. APPROVAL PART NO.
1 OF 3
ALL OTHER ASSEMBLY (± 0.060") CMFL 5/10/2023 PHH-AL
PAGE
PROPRIETARY NOTE: CLASS SUB DRAWING USAGE CHECKED BY DWG. NO.
THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT
INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF
VALMONT INDUSTRIES IS STRICTLY PROHIBITED.
87 02 CUSTOMER PHH-AL
1 3/4" 7 3/8"
R3/8"
1/2" 3/4" 1/2"
7/8"
4-1/2" RIM WIDTH
4" RIM WIDTH
1"
3-1/2" RIM WIDTH
3" RIM WIDTH
DETAIL A
BOLT PLACEMENT
TOLERANCE NOTES DESCRIPTION
TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE: Engineering
SAWED, SHEARED AND GAS CUT EDGES (± 0.030") PORT HOLE HANGER KIT Support Team:
DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES 1-888-753-7446
LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES valmont
BENDS AND ANGLES ARE ± 1/2 DEGREE
ALL OTHER MACHINING (± 0.030") CPD NO. DRAWN BY ENG. APPROVAL PART NO.
2 OF 3
ALL OTHER ASSEMBLY (± 0.060") CMFL 5/10/2023 PHH-AL
PAGE
PROPRIETARY NOTE: CLASS SUB DRAWING USAGE CHECKED BY DWG. NO.
THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT
INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF
VALMONT INDUSTRIES IS STRICTLY PROHIBITED.
87 02 CUSTOMER PHH-AL
FLIP BRACKETS TO ATTACH TO
TOP OF PORT HOLE RIM
3
3
2
4
4
ALTERNATE CONNECTION
4 5
4
1
5
TOLERANCE NOTES DESCRIPTION
TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE: Engineering
SAWED, SHEARED AND GAS CUT EDGES (± 0.030") PORT HOLE HANGER KIT Support Team:
DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES 1-888-753-7446
LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES valmont
BENDS AND ANGLES ARE ± 1/2 DEGREE
ALL OTHER MACHINING (± 0.030") CPD NO. DRAWN BY ENG. APPROVAL PART NO.
3 OF 3
ALL OTHER ASSEMBLY (± 0.060") CMFL 5/10/2023 PHH-AL
PAGE
PROPRIETARY NOTE: CLASS SUB DRAWING USAGE CHECKED BY DWG. NO.
THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT
INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF
VALMONT INDUSTRIES IS STRICTLY PROHIBITED.
87 02 CUSTOMER PHH-AL
