Scribd
Upload
10 views2 pages

Fluid Mechanics Assignment Questions

This document is an assignment for the Fluid Mechanics and Machinery course at Ahsanullah University of Science and Technology. It includes six questions that require calculations related to the velocity of water jets, curved vanes, and the efficiency of fluid systems, with specific parameters based on the student's ID. Each question involves applying principles of fluid mechanics to determine various velocities and forces.

Uploaded by

naznin.me
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views2 pages

Fluid Mechanics Assignment Questions

This document is an assignment for the Fluid Mechanics and Machinery course at Ahsanullah University of Science and Technology. It includes six questions that require calculations related to the velocity of water jets, curved vanes, and the efficiency of fluid systems, with specific parameters based on the student's ID. Each question involves applying principles of fluid mechanics to determine various velocities and forces.

Uploaded by

naznin.me
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

AHSANULLAH UNIVERSITY OF SCIENCE AND TECHNOLOGY

Assignment-1
Department: IPE Program: MPE Year/Semester: 3-1
Course No: ME 3131 Course Name: Fluid Mechanics and Machinery
Full Marks: 40
Q 1. A jet of water having a velocity of [last two digit of your student ID] m/s [6]
striking a symmetrical curved vane at an angle of 30°. Velocity of the vane is
5.5 m/s. Find the velocity of whirl, flow velocity, relative velocity at inlet.
Velocity triangle is given below. [If last two digit is 00 then consider 10 as
your velocity]

Q 2. Velocity of jet at inlet [last two digit of your student ID] m/s and jet angle at [10]
inlet is 45°. Curved Vane is moving at 12 m/s. Exit velocity is 80% of inlet
velocity. Vane angle at inlet and outlet is equal. Calculate the horizontal force
acting on the vane. Jet dia=20mm. [If last two digit is 00 then consider 20 as
your velocity]

Q 3. A series of curved blades fixed on the rim of a wheel rotating at 250 rpm. Inlet [4]
and outlet diameter is 0.9m and 0.7m. Find the vane inlet and outlet velocity.

1
Q 4. A jet of water having a velocity of [last two digit of your student ID] m/s [8]
striking a series of curved vane at an angle of 30°. Find the maximum
efficiency if water exits radially. [If last two digit is 00 then consider 30 as
your velocity]

Q 5. A jet of water strikes a series of blades at an angle of 0° with an absolute [4]


velocity of [last two digit of your student ID] m/s. After striking the blade
the jet is deflected through an angle of 150°. What is the jet angle at exit? Also
find the whirl component at inlet. [If last two digit is 00 then consider 40 as
your velocity]

Q 6. Velocity of jet at inlet 22m/s and jet angle at inlet is 45°. Curved Vane is [8]
moving at 12 m/s. Exit velocity is 80% of inlet velocity. Vane angle at inlet
and outlet is equal. Calculate the efficiency.

You might also like