D Tachometers S C H M I   D    T

c o n t r o l i n s t r u m e n t s

Contact measurement
of revolutions,
surface speed and
length

Model DT -105A
Electronic hand-held tachometers
Contact type

Standard features:
 Measures revolutions,
surface speed and length
 Easy to read LCD display
 Easy to use
 Built-in memory for LAST, MIN,
MAX and 10 extra readings
for recall in display
 Rugged aluminium housing
 16 User selectable engineering units

Model DT -107A Model DT-107A

Bright, easy to read
Model DT-105A
Standard features: LED display
LCD display for
 Same as DT-105 A, but with longer battery life
LED display

Accessories Specifications Model DT-105A  Model DT-107A

Measuring ranges: Revolutions: 0.1 - 25000 rpm

(floating decimal point) Speed: e.g. 0.02 - 3810 m / min
F G
Length: e.g. 0.5 - 99999 cm
A B 10002 S 10005 S
Accuracy: 0 - 999.9 rpm (± 0.1 rpm) ± 1 digit
10006 S

10007 S

E 1000 - 9999.9 rpm (± 1 rpm) ± 1 digit

10008 E
10000 - 25000 rpm (± 0.01 % of reading) ± 1 digit
Speed and Length: ± 0.4 % of reading ± 1 digit
Measuring units: Revolutions: rpm; rph; total revolutions (counter): rev
Speed: m / min; m / h; feet / min; feet / h;
Model DT-107A-12C yards / min; yards / h; inch / min; miles / h
Length: cm; m; inch; feet; yard
Display: 5 digit LCD 12 mm high  5 digit LED 10 mm high
Auto power off: after 5 min of non-use  10 s
Batteries: 2x 1.5 V Type AA
approx. 65 h continuous use  approx. 40 h continuous use
Memory system: 13 readings (incl. LAST + MIN + MAX) are stored and retained for 5 min
Temperature range: 5 - 45 ºC Model DT-105A and
Air humidity: 85 % RH, max. DT-107A:
Built in selector switch
Housing material: Die-cast aluminium permits the user
Subject to change without notice.

Dimensions: 180 x 60 x 47 mm (L x W x H) to display readings in

a wide variety
Model DT-105A and DT-107A is also Weight, net (gross): approx. 350 g (800 g) of measuring units.
available with 12 inch grooved wheel
(groove 24 mm) to determine wire speed Delivery includes: Tachometer in carrying case with standard accessories:
and length of ropes, tapes etc. 2 batteries, 2 rubber Tips (A), 1 funnel (B), 1 rubber measuring wheel (F) 6 inch
Code 12C e.g. DT-107A-12C circumference, 1 extension shaft (E) 75 mm, certificate of compliance with the order,
instruction manual in german and english
Special accessories: Grooved measuring wheel (G) with 6 inch circumference
for measuring yarn and wire speeds, calibration certificate

SCH M I DT · ALL OVER THE TECHNICAL WORLD

D1 [Link]