Scribd
Upload
135 views1 page

KLJ 2576 BK PVC Compound Data Sheet

The document is a technical data sheet for KLJ 2576 BK PVC compound, detailing its specifications such as color, specific gravity, hardness, thermal stability, tensile strength, elongation at break, and tear strength. It includes typical values for these parameters, processing temperature recommendations, and a disclaimer regarding the specifications and liability. The document emphasizes the importance of verifying product suitability for specific applications before use.

Uploaded by

Akash Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
135 views1 page

KLJ 2576 BK PVC Compound Data Sheet

The document is a technical data sheet for KLJ 2576 BK PVC compound, detailing its specifications such as color, specific gravity, hardness, thermal stability, tensile strength, elongation at break, and tear strength. It includes typical values for these parameters, processing temperature recommendations, and a disclaimer regarding the specifications and liability. The document emphasizes the importance of verifying product suitability for specific applications before use.

Uploaded by

Akash Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

FORM NO.

:KLJ/QEMS/KPC/R&D/F01/09 Dec-10

KLJ POLYMERS & CHEMICALS LTD. UNIT- II


An ISO 9001:2015 & ISO 14001:2015 Company
[Link] : KLJ HOUSE, 8A Shivaji Marg, Najafgarh Road, New Delhi - 110 015 (India)
Tel.: +91-11-25459706-7-8, 41427427-8-9, 45371400 Fax: +91-11-25459709, 25436264
Website : [Link] CIN : U24119DL1989PLC036883

TECHNICAL DATA SHEET

PRODUCT : PVC COMPOUND

GRADE : KLJ 2576 BK

[Link]. Parameters Test Method Unit Specification Typical Value

1 COLOUR - BLACK BLACK

2 SPECIFIC GRAVITY ASTM D792 - 1.25 ± 0.02 1.26

3 HARDNESS (Shore-A) ASTM D 2240 NOS. 73 ± 2 75

4 THERMAL STABILITY IS 5831 MINUTES 50 MIN 100

5 TENSILE STRENGTH ASTM D 638 Mpa 18 MIN 19

6 ELONGATION AT BREAK ASTM D 638 % 375 MIN 390

7 TEAR STRENGTH ASTM D 264 Kgf/cm2 35 MIN 40

Remark :
The above properties are indicative and represent the values as tested in our laboratory on compression moulded sheet.
Suitability of the Product for particular application may be verified before use.
Typical processing temperature is 130 to 160 ± 100C and can be adjusted on different processing equipments.
It is recommended to dry the compound @ 60 ± 100C for better processability.

Disclaimer :
The specifications given are for guidelines only. The compound is designed to run on different machine, however some adjustments may be required on
individual machine. There is no guarantee and / or warrantee what so ever, after processing in any case, our liability shall be restricted to the replacement
of material in packed condition. The customers are recommended to check the quality, prior to commercial use. All properties are tested as per standards
mentioned above. Any data may change without prior information and do not constitute the agreed quality of our compound.

Factory : Survey No.177, Jamalpada Road, Village Silli, Silvassa - 396 230, UT of D&NH, India
Tel. : +91-9662047058-59, Fax : +91-260-2643098

You might also like