Rando® HD
Anti-Wear Hydraulic Fluid
Premium quality, anti-wear hydraulic fluid, BENEFITS
designed for use in mobile and stationary high
pressure hydraulic systems. Longer equipment life
Special anti-wear additive package reduces wear by
APPLICATIONS protecting surfaces when load causes breakdown of
the lubricant film.
• Industrial hydraulic systems Reduced downtime
• Hydraulics of mobile and construction equipment Effective rust and oxidation inhibitor system prevents
the production of abrasive particles from rust
• Hydraulic systems with vane, gear or piston pumps
formation, and deposits, varnishes and sludges from
• Plastic injection molding machines oil breakdown, which can damage equipment
• Machine tools surfaces and seals, and block filters prematurely.
• Enclosed gear systems Trouble-free operation
• Industrial circulating systems Good hydrolytic stability and water separation
characteristics provide excellent filterability in the
presence of water contamination. Good anti-foam
PERFORMANCE STANDARDS and air release properties ensure smooth operation
and system efficiency.
• Denison Hydraulics HF-0 (ISO 32, 46, 68) Extended oil service life
• Vickers M-2952-S, I-286-S [industrial applications], High oxidation stability resists oil thickening and
M-2950-S [mobile applications] (ISO 32, 46, 68) deposit formation in service, eliminating the need for
• Cincinnati Lamb (formerly Cincinnati Milacron) P-68 unscheduled change of hydraulic fluid.
(ISO 32), P-69 (ISO 68), P-70 (ISO 46)
• Mannesmann Rexroth requirements (RE 07 075)
• ISO Standard 6743 Part 4, Type HM
ENVIRONMENT, HEALTH and SAFETY
• DIN 51524 Part 2, HLP (ISO 22, 32, 46, 68, 100) Information is available on this product in the Caltex Material
• SAE MS1004 HM (ISO 22, 32, 46, 68, 100) Safety Data Sheet (MSDS) and Caltex Customer Safety Guide.
Customers are encouraged to review this information, follow
• US Steel 126 and 127 precautions and comply with laws and regulations concerning
• David Brown Industrial Gears 0A, 1A, 2A, 3A, 4A, 5A product use and disposal. To obtain a MSDS for this product,
visit www.caltexoils.com.
KEY PROPERTIES
ISO Grade 22 32 46 68 100 150 220
Air Release @ 50°C, mins 3.0 4.0 7.5 9.0 12.0 15.0 18.0
Flash Point, °C 190 210 220 226 240 250 260
FZG, Pass Load Stage 10 10 10 10 10 10 10
Pour Point, °C -36 -33 -33 -30 -21 -15 -12
Viscosity,
2
mm /s @ 40°C 21.0 30.5 44.0 65.0 95.5 143 210
2
mm /s @ 100°C 4.2 5.3 6.7 8.6 10.8 14.3 18.4
Viscosity Index 101 106 106 104 97 97 97
Zinc Content, mass % 0.027 0.027 0.027 0.027 0.027 0.027 0.027
0407
This bulletin was prepared in good faith from the best information available
at the time of issue. While the values and characteristics are considered
representative, some variation, not affecting performance, can be expected.
It is the responsibility of the user to ensure that the products are used in the
applications for which they are intended.
Produced by ChevronTexaco Global Lubricants
©2003 ChevronTexaco Corporation. All rights reserved.
