VoIP Phone
User Manual
DGP-301 多功能網路電話
中文簡易說明書
2006/08/15
ShangHai BB Information & Technology 1/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
DGP-301 BB-Phone KeyPad 介紹
DGP-301 BB-Phone 接線圖
ShangHai BB Information & Technology 2/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
以下必須是 6/23 以後的版本
話機鍵盤直接輸入 SIP 帳號跟密碼方式：
1. menu_7_3 輸入 test (8 按 2 次+3 按 3 次+7 按 5 次+8 按 2 次+enter)
2. menu_5_ enter_進入開始設定帳號跟密碼。
話機快速查本機 IP 方式：
1. 查看到 WAN 及 LAN 埠 IP：Menu_4_5
2. 查看 WAN 的狀態：Menu_4_1_1
3. 查看 LAN 狀態：Menu_4_2
快速進入 IP Phone 的網頁方式：
所先感謝你使用DGP-301話機，以下就新的軟體怎樣查到WAN 埠 IP及LAN 埠 IP說明，查到IP就可利用IE瀏覽器進入設
定。
1. 在話機鍵盤上按 menu→在按數字鍵 4→在按數字鍵 5 就會看到兩組 IP 。WAN 埠的 IP [Link]，那在 IE 就建
入，[Link] 就可以進入 Login VOIP 的劃面。
2. Login.
1. 在 username 輸入: root
2. 在 password 輸入: test
ShangHai BB Information & Technology 3/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
3. 進入後會看到軟體版本如下
速撥鍵輸入方式
速撥鍵有十組你可以設比較重要及常用電話
Position輸入0~9的速撥代表號
Name輸入該組名稱或代號 voice mail
URL 輸出撥號規則，可以是市話、手機、網路電話、IP PBX 等代碼。(各IP PBX代碼不一，所以必須先確定Asterisk
的代碼)
設定完後按下 “Add Phone” 就儲存完成
z 所以當話機在 IP PBX 的平台接受到語音留言，留言燈就會點亮一閃爍。直接按 M1 就可進入 IP PBX 聽去留言。
ShangHai BB Information & Technology 4/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
4. 在Phone Setting設定想要的功能
轉接設定 功能Call Forward function: 輸入想將網路電話轉移的號碼
All Forward: 來電轉出
Busy Forward: If you are on the phone, the new incoming call will forward to the number you choosed. You can
input the name and the phone number in URL field.
No Answer Forward: : If you can not answer the phone, the incoming call will forward to the number you choosed.
You can input the name and the phone number in URL field. Also you have to set the Time Out time for system to
start to forward the call to the number you choosed.
When you finished the setting, please click the Submit button.
ShangHai BB Information & Technology 5/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
SNTP Setting function: you can setup the primary and second SNTP Server IP Address, to get the date/time
information. Also you can base on your location to set the Time Zone, and how long need to synchronize again. When
you finished the setting, please click the Submit button.
Volume Setting function: you can setup the Handset Volume, Ringer Volume, and the Handset Gain. When you
finished the setting, please click the Submit button.
Handset Volume is to set the volume you hear from the handset.
Speaker Volume is to set the volume you hear from the speaker phone.
Ringer Volume is to set the ringer volume.
Handset Gain is to set the volume send out from from the handset.
Speaker Gain is to set the volume send out from from the micro phone.
Melody Setting function: you can select the melody for the imcoming call. When you finished the setting, please click
the Submit button.
ShangHai BB Information & Technology 6/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
Block Setting function: you can setup the Block Setting to keep the phone slience. You can choose Always Block or
Block a period.
Always Block: All incoming call will be blocked until disable this feature.
Block Period: Set a time period and the phone will be blocked during the time period. If the “From” time is large than
the “To” time, the Block time will from Day 1 to Day 2.
When you finished the setting, please click the Submit button.
Auto Dial Setting function: This function is when you input the phone number by the keypad but you don’t need to
press “#”. After time out the system will dial directly.
Call Waiting Setting：來電等待，如果啟動來電等待在通話中有第三方打入話機會有插撥音，嘟嘟來提醒。
ShangHai BB Information & Technology 7/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
5. Network 網路設定方式
Network Settings:
網路設定有三種模式，以下三種選擇一種
固定IP ：在有固定IP的情況下選擇，輸入固定的IP位址。MASK輸入子網路遮罩IP，Gateway輸入預設閘道IP，輸入
dns server IP。
Submit (儲存)
DHCP：動態IP，即浮動IP (一般在有路由器的情況下選用該項，也是最常用的一種)。選擇後就不需在做IP細部設定。
Submit (儲存)
PPPoE ：撥接式ADSL
點選使用PPPOE ON
輸入ISP業者提供Username and Password.
Submit (儲存)。
Bridge：將Lan Port 當HUB使用。出廠預設值。
ShangHai BB Information & Technology 8/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
DDNS Setting: You can configure the DDNS setting in this page. You need to have the DDNS account and input the
informations properly. You can have a DDNS account with a public IP address then others can call you via the DDNS
account. But now most of the VoIP applications are work with a SIP Proxy Server. When you finished the setting,
please click the Submit button.
6. SIP Settings：帳號設定
本設備可以註冊三組SIP的帳號。 首先先選擇
Realm 1 (Default)
[Link].1 Active選擇on
[Link].2 Display Name: 網內互撥讓對方可以看到你的電話號碼
[Link].3 User Name: 輸入網路電話帳號.
[Link].4 Register Name:同網路電話帳號就可
[Link].5 Register Password: 密碼.
[Link].6 Domain Server: Proxy Server的網址或IP. 例如 [Link]
[Link].7 Proxy Server: 輸入Proxy Server IP及埠.例如 [Link]:5070
[Link].8 Outbound Proxy: 所有的SIP通信協定都送至Proxy處理。
ShangHai BB Information & Technology 9/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
Realm 2或3 (Default)
[Link].9 Active選擇on
[Link].10 Display Name: 網內互撥讓對方可以看到你的電話號碼
[Link].11 User Name: 輸入網路電話帳號.
[Link].12 Register Name:同網路電話帳號就可
[Link].13 Register Password: 密碼.
[Link].14 Domain Server: Proxy Server的網址或IP. 例如 [Link]
[Link].15 Proxy Server: 輸入Proxy Server IP及埠.例如 [Link]:5070
[Link].16 Outbound Proxy: 所有的SIP通信協定都送至Proxy處理。
特殊功能
DGP-301 BB-Phone 如何切換其它帳號 (三進三出的功能)
首先第二組跟第三組帳號必須註冊狀態是 Registered 才可以使用該功能。
z 第一 SIP 切換第一組帳號撥 1＊＃ 話機顯示 Busy，掛機後就跳至該組帳號，再撥打就是由該組帳號撥出。
z 第二 SIP 切換第二組帳號撥 2＊＃ 話機顯示 Busy，掛機後就跳至該組帳號，再撥打就是由該組帳號撥出。
z 第三 SIP 切換第三組帳號撥 3＊＃ 話機顯示 Busy，掛機後就跳至該組帳號，再撥打就是由該組帳號撥出。
ShangHai BB Information & Technology 10/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
Port Settings: 出廠設定 SIP Port是5060，假若你第一組帳號不是5060就必須在這改正確的Port。
RTP port ： 在 同 一 台 IP 分 享 器 下 ， 有 裝 多 台 的 設 備 最 好 改 變 不 同 的 SIP/RTPport 必 須 是 偶 數 。
Codec Settings: you can setup the Codec priority, RTP packet length, and VAD function in this page. You need to
follow the ISP suggestion to setup these items. When you finished the setting, please click the Submit button.
ShangHai BB Information & Technology 11/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
Codec ID Settings: you can set the Codec ID to meet the other device’s requirement. When you finished the setting,
please click the Submit button.
ShangHai BB Information & Technology 12/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
DTMF Setting: 設定二次撥號，在撥入PBX時候會需要用到二次撥號。必須確定ITSP所提供的二次撥好是那一種方式。
RFC2833 Out-Band DTMF,
Inband DTMF
DTMF SIP Info
RPort Function: you can setup the RPort Enable/Disable in this page. To change this setting, please following your
ISP information. When you finished the setting, please click the Submit button.
Other Settings: you can setup the Hold by RFC, Voice/SIP QoS and SIP expire time in this page. To change these
settings please following your ISP information. When you finished the setting, please click the Submit button. The
QoS setting is to set the voice packets’ priority. If you set the value higher than 0, then the voice packets will get the
higher priority to the Internet. But the QoS function still need to cooperate with the others Internet devices.
ShangHai BB Information & Technology 13/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
7. NAT Trans.
In NAT Trans. you can setup STUN function. These functions can help your VoIP Phone working properly behind
NAT.
STUN Setting: you can setup the STUN Enable/Disable and STUN Server IP address in this page. This function can
help your VoIP Phone working properly behind NAT. To change these settings please following your ISP information.
When you finished the setting, please click the Submit button.
8. Others.
In Others you can setup Auto Config and ICMP Setting function. The function can configure your VoIP Phone
automatically.
Auto Config: 自動配置
Auto Config
[Link].17 Config Mode: You can select Disable/TFTP/FTP to do the auto config function. This function
must work with the Auto Config Server.
[Link].18 TFTP server: Setting the TFTP server IP address.
[Link].19 FTP server: Setting the FTP server IP address.
[Link].20 FTP Login Name: Setting the login name to the FTP server.
[Link].21 FTP Password: Setting the Password to the FTP server.
Default setting: You can restore to the default setting. 還原成出廠設定值.
System Authentication: To do the SIP setting from Keypad, need to input the password first. Default is “test”.
Version: This will show the system’s firmware version.
Watch Dog: You can use this to enable Watch Dog function to do the debugging.
Restart: You can use this function to restart your IP Phone. 重新開機
you can setup the Auto Configuration Enable/Disable and auto configuration by FTP or TFTP. You need to select the
way to do the Auto Configurationand set the Server IP address in this page. This function can automatically download
the configure file to setup your VoIP Phone. When you finished the setting, please click the Submit button.
ShangHai BB Information & Technology 14/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
ICMP Setting: you can setup the ICMP echo Enable/Disable in this page. This function can disable echo when
someone ping this device, it can avoid haker try to attack the device. When you finished the setting, please click the
Submit button.
9. System Auth.
In System Authority you can change your login name and password.
10. Save Change
In Save Change you can save the changes you have done. If you want to use new setting in the VoIP Phone, You
have to click the Save button. After you click the Save button, the VoIP Phone will automatically restart and the new
setting will effect.
ShangHai BB Information & Technology 15/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
11. Update
In Update you can update the VoIP Phone’s firmware to the new one or do the factory reset to let the VoIP Phone
back to default setting.
In New Firmware function you can update new firmware via HTTP in this page. You can ugrade the firmware by the
following steps:
Select the firmware code type, Risc or DSP code.
Click the “Browse” button in the right side of the File Location or you can type the correct path and the filename in
File Location blank.
Select the correct file you want to download to the VoIP Phone then click the Update button.
In Default Setting you can restore the VoIP Phone to factory default in this page. You can just click the Restore button,
then the VoIP Phone will restore to default and automatically restart again.
12. Reboot
Reboot function you can restart the VoIP Phone. If you want to restart the VoIP Phone, you can just click the Reboot
button, then the VoIP Phone will automatically.
ShangHai BB Information & Technology 16/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
ShangHai BB Information & Technology 17/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
2 Engineering webpage
13. Engineer usage webpage list
You have to login the system first then change the webpage to [Link] manually ([Link] address:9999/[Link]). In
this webpage you will see the list about engineer webpage. You can change the webpage to what you want.
14. [Link]
You have to login the system first then change the webpage to [Link] manually ([Link] address:9999/[Link]).
In this page you can update the system’s ROM code, IC Test , Default setting and Logo.
Update ROM code. You can update the ROM code from this function. Please be noted that if you update the wrong
file or during the update process the power is off, the system will be crashed.
Update Logo. The Logo specification is 220x170 jepg file.
ShangHai BB Information & Technology 18/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
15. [Link]
如何將設備內的IP分享器功能啟動，所先進入([Link] address:9999/[Link]).會看到下面的劃面。
z 進入 LAN setting 的設定
z 進入 WAN setting 的設定。
16. 設定完後按Submit儲存，再到Save Change點選Save設備會從先啟動。
z 如何取消或回到 DHCP 模式
z 話機按 Menu 選第 4 項，選 [Link] 按 Enter
z 選 [Link] Type 按 Enter
z 按游標 Down 選 [Link] Client 按 Enter
z 按 MENU 三下，退回到主劃面。將電源線拔掉從啟話機就直接進入 DHCP 模式。
ShangHai BB Information & Technology 19/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
17. [Link]
如何啟動DMZ的功能，在IE輸入你的IP位址後面加上:9999/[Link]如 ([Link] address:9999/[Link]).
就會看到下面的劃面，選擇on在將要放在DMZ區域網內的ip輸入在DMZ Host IP。在選submit。
18. [Link]
You have to login the system first then change the webpage to [Link] manually ([Link] address:9999/[Link]).
In this page you can setup the Virture Server function.
ShangHai BB Information & Technology 20/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
19. [Link]
You have to login the system first then change the webpage to [Link] manually ([Link] address:9999/[Link]).
In this page you can setup the Tone frequency and cadence to meet the requirement.
20. [Link] 開啟全雙工方式
You have to login the system first then change the webpage to [Link] manually ([Link] address:9999/[Link]).
In this page you can setup the Speaker function. Default we set the speaker is in half-duplex mode. If you want to set
to full-duplex mode, it need to check if your housing is suitable for this function. Or you have to set it as half-duplex
mode.
ShangHai BB Information & Technology 21/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
21. [Link]
You have to login the system first then change the webpage to [Link] manually ([Link] address:9999/[Link]).
In this page you can setup the VLAN function.
VLAN Packets: if enable then the device will only accept packet with VLAN Tag and the Tag must be the same as VID
you set.
VID: You can follow your service provider to set your VID.
User Priority: Defines user priority, giving eight (2^3) priority levels. IEEE 802.1P defines the operation for these 3
user priority bits. Usually this will be defined by your service provider.
CFI: Canonical Format Indicator is always set to zero for Ethernet switches. CFI is used for compatibility reason
between Ethernet type network and Token Ring type network. If a frame received at an Ethernet port has a CFI set to
1, then that frame should not be forwarded as it is to an untagged port.
NAT Mode: When you set your device in NAT mode, you can separate the other device connectd behind your device
into 4 group. You can set different VID for these 4 group.
ShangHai BB Information & Technology 22/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
3 Keypad interface for IP Phone demo system
22. 話機按鍵代號表
Key Name Description Note
1 “1＂, “-“, “ ＂, “!＂, “?＂
2 “2＂, “a＂, “b＂, “c＂, “A＂, “B＂, “C＂
3 “3＂, “d＂, “e＂, ＂f＂, “D＂, “E＂, “F＂
4 “4＂, “g＂, “h＂, “I＂, “G＂, “H＂, “I＂
5 “5＂, “j＂, “k＂, “l＂, “J＂, “K＂, “L＂
6 “6＂, “m＂, “n＂, “o＂, “M＂, “N＂, “O＂
7 “7＂, “p＂, “q＂, “r＂, “s＂, “P＂, “Q＂,
“R＂, ｀S＂
8 “8＂, “t＂, “u＂, “v＂, “T＂, “U＂, “V＂
9 “9＂, “w＂, “x＂, “y＂, “z＂, “W＂, “X＂,
“Y＂, “Z＂
0 “0＂, “space＂
* “*＂, “‧＂, “:＂, “@＂
# Start dialing process 開始撥號鍵
XFER This is “Transfer＂ to the other phone number 轉接鍵
REDIAL This is “REDIAL＂ the same number again 上通重播鍵
HOLD This is “HOLD＂ function 通話保留鍵
Mute This is “Mute＂ function 靜音鍵
DND This is “Reject＂ function 拒接所有來電
OK This is “OK＂, accept setting 設定確認鍵
DEL This is “Delete＂, Delete word or phone number 刪除鍵
UP/DOWN This is Up↑ and Down↓ key 上下鍵
LEFT/RIGHT This is Left← and Right→ key 左右鍵
MENU This is the “Menu＂ key to set the IP Phone 菜單
SPK This the Speaker Phone 免提鍵
Line1~Line4 This is the Line1 to Line4, will be 4 line 4 線對外撥號
M1~M4 This is the M1 to M4, this is 4 speed dial number. 紀錄 4 組快速鍵
Conf This is three way conference function 三方通話
Call In This is Incoming call list 來電紀錄
Call Out This is out going call list 去電紀錄
Volume -/+ This is volume setting 音量鍵
ShangHai BB Information & Technology 23/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
23. Keypad Function and setting List
Phone Book
Search:Search Phone Book. 搜尋電話簿清單
Add entry:Add new phone number to phone book. 加入新的電話號碼
Speed dial:Add speed dial phone number to speed dial list. 加入新的速撥號碼
Erase all:Erase all phone number from Phone Book. 刪除整個電話簿
Call history
Incoming calls: Show all incoming call. 顯示所有來電
Dialed numbers: Show all dialed call. 顯示所有已撥號
Erase record: Delete call history. 刪除通話紀錄
1. All: Delete all call history. 刪除所有通話紀錄
2. Incoming: Delete all incoming call. 刪除所有來電紀錄
3. Dialed: Delete all dialed out call. 刪除所有撥號紀錄
Phone setting
Call forward
[Link].1 All Forward. 所有來電轉接
1. Activation: To Enabled/Disabled this function.
2. Number: Forward to a Speed Dial Number.
[Link].2 Busy Forward. 忙線時來電轉接
1. Activation: To Enabled/Disabled this function.
2. Number: Forward to a Speed Dial Number.
[Link].3 No Answer Forward. 無人接聽時來電轉接
1. Activation: To Enabled/Disabled this function.
2. Number: Forward to a Speed Dial Number.
[Link].4 Ring Timeout: Set the Ring times to start the no answer forward function, ex: 2 means after 2 rings
then forward to the dedicated number.
Block Setting
1. All: 拒接所有來電
2. By Time: 一段時間拒接所有來電
3. Duration: Set the start time and end time to Block Setting.
Date/Time setting: Date and Time Setting. 日期時間設定功能
[Link].5 Date & Time: Set the IP Phone Date and Time. 修改日期時間
[Link].6 SNTP setting
[Link].6.1 SNTP : Enabled / Disable SNTP. 啟動/ 關閉 網路時間伺服器
[Link].6.2 Primary SNTP: Set Primary SNTP server IP address. 第一網路時間伺服器
[Link].6.3 Secondary SNTP: Set Secondary SNTP server IP address. 第二網路時間伺服器
[Link].6.4 Time zone: Set Time zone. 時區設定
[Link].6.5 Adjustment Time: Set adjustment time period. 自動對時設定
ShangHai BB Information & Technology 24/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
Volume and Gain
[Link].7 Handset volume: Set Handset volume from 0~15 (max.) for you to hear. 話筒音量調整
[Link].8 Speaker volume: Set Spearer phone volume from 0~15 (max.) for you to hear. 免持聽筒音量調整
[Link].9 Handset Gain: Set Handset Gain from 0~15 (max.) for the other site to haer. 話筒傳出音量調整
[Link].10 Speaker Gain: Set Spearer phone Gain from 0~15 (max.) for the other site to haer. 免持聽筒傳
出音量調整
Ringer
[Link].11 Ringer volume: Ringer volume setting from 0~15 (max.). 鈴聲音量調整
[Link].12 Ringer type: Ringer tone selection from 1~4. 鈴聲旋律選擇
Auto Dial: Set Auto Dial time from 3~9 seconds.
Auto Answer: Set Auto Answr for user can re-dial a call from IP call to PSTN call or from PSTN call to IP call. This
function will active on IP Phone with FXO interface.
Answer Counter: Set Auto Answer will active after the numbers of ring. This function will active on IP Phone with
FXO interface.
Network
General
[Link].13 IP Type
1. Fixed IP client: 以手動方式設定網路地址
2. DHCP client: 以 DHCP 方式取得網路地址
3. PPPoE client: 以 PPPoE 方式取得網路地
[Link].14 Fixed IP setting
[Link].14.1 Host IP: 此話機之網路地址設定
[Link].14.2 Network mask: 網路遮罩設定
[Link].14.3 Gateway IP: 網關IP地址設定
[Link].14.4 MAC address: MAC地址設定
[Link].15 PPPoE setting
[Link].15.1 User name: PPPoE使用者名稱設定
[Link].15.2 Password: PPPoE使用者密碼設定
[Link].16 DNS Server
[Link].16.1 Primary DNS: 第一DNS伺服器地址設定
[Link].16.2 Secondary DNS: 第二DNS伺服器地址設定
Status: Show IP address and MAC address, 網路設定狀況, 顯示IP地址及MAC 地址
SIP Settings
If you want to use Kaypad to set the SIP setting, you have to go to item 7 (Administrator) System Authent to input the
password, or you can not change the SIP setting.
ShangHai BB Information & Technology 25/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
Service domain
[Link].17 First realm
[Link].17.1 Activation: 第一SIP 伺服器啟動/停止
[Link].17.2 User name: SIP 使用者名稱設定
[Link].17.3 Display name: SIP 顯示名稱設定
[Link].17.4 Register name: SIP登錄名稱設定
[Link].17.5 Register password: SIP登錄密碼設定
[Link].17.6 Proxy server: SIP Proxy伺服器地址設定
[Link].17.7 Domain server: Domain伺服器地址設定
[Link].17.8 Outbound proxy: Outbound Proxy 伺服器地址設定
[Link].18 Second realm
[Link].18.1 Activation: 第二SIP 伺服器啟動/停止
[Link].18.2 User name: SIP 使用者名稱設定
[Link].18.3 Display name: SIP 顯示名稱設定
[Link].18.4 Register name: SIP登錄名稱設定
[Link].18.5 Register password: SIP登錄密碼設定
[Link].18.6 Proxy server Proxy: 伺服器地址設定
[Link].18.7 Domain server: Domain伺服器地址設定
[Link].18.8 Outbound proxy: Outbound Proxy 伺服器地址設定
[Link].19 Third realm
[Link].19.1 Activation: 第三SIP 伺服器啟動/停
[Link].19.2 User name: SIP 使用者名稱設定
[Link].19.3 Display name SIP: 顯示名稱設定
[Link].19.4 Register name: SIP登錄名稱設定
[Link].19.5 Register password: SIP登錄密碼設定
[Link].19.6 Proxy server Proxy: 伺服器地址設定
[Link].19.7 Domain server: Domain伺服器地址設定
[Link].19.8 Outbound proxy: Outbound Proxy 伺服器地址設定
Codec
[Link].20 Codec type
1. G.711 uLaw: 選擇優先用 G.711 uLaw 語音壓縮方式
2. G.711 aLaw: 選擇優先用 G.711 aLaw 語音壓縮方式
3. G.723: 選擇優先用 G.723.1 語音壓縮方式
4. G.729: 選擇優先用 G.729A 語音壓縮方式
5. G.726-16: 選擇優先用 G.726 16Kbps 語音壓縮方式
6. G.726-24: 選擇優先用 G.726 24Kbps 語音壓縮方式
7. G.726-32: 選擇優先用 G.726 32Kbps 語音壓縮方式
8. G.726-40: 選擇優先用 G.726 40Kbps 語音壓縮方式
9. 部份 proxy 有限定 G.711、G.723 所以必須將不支持的語音壓縮關掉。
[Link].21 VAD: Voice Active Detection Enable/Disable. 啟動/停止設定
RTP setting
[Link].22 Outband DTMF: Outband DTMF 啟動/停止設定
[Link].23 Duplicate RTP
1. No duplicate: 語音封包重送 0 次
2. One duplicate: 語音封包重送 1 次
3. Two duplicate: 語音封包重送 2 次
ShangHai BB Information & Technology 26/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
RPort Setting: RPort Enabled/Disabled 啟動/停止 RPORT 設定
Hold by RFC: 通話保留啟動/停止設定 (依照RFC3261標準)
Status: Show the SIP Proxy register status. You can use UP/Down key to check each Realm’s status. 顯示對SIP
Proxy 的註冊狀態
1. First Realm: 第一 SIP 伺服器註冊狀態
2. Second Realm: 第二 SIP 伺服器註冊狀態
3. Third Realm: 第三 SIP 伺服器註冊狀態
NAT Transversal
STUN setting
[Link].24 STUN: STUN啟動/停止設定
[Link].25 STUN server: STUN伺服器地址設定
Administrator
Auto Config
[Link].26 Config Mode: You can select Disable/TFTP/FTP to do the auto config function. This function
must work with the Auto Config Server.
[Link].27 TFTP server: Setting the TFTP server IP address.
[Link].28 FTP server: Setting the FTP server IP address.
[Link].29 FTP Login Name: Setting the login name to the FTP server.
[Link].30 FTP Password: Setting the Password to the FTP server.
Default setting: You can restore to the default setting. 還原成出廠設定值.
System Authentication: To do the SIP setting from Keypad, need to input the password first. Default is “test”.
Version: This will show the system’s firmware version.
Watch Dog: You can use this to enable Watch Dog function to do the debugging.
Restart: You can use this function to restart your IP Phone. 重新開機
ShangHai BB Information & Technology 27/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
VoIP Phone
User Manual
ShangHai BB Information & Technology 28/28 8/16/2006
Copyright © 2005, 上海寬邁信息科技 VoIP Phone_User Manual
