MAIN

C ATA L O G
2 0 2 3 - 1
1
About Us
EAE Group
5 factories
EAE Group has a total of five factories
Since 1973 in Istanbul and Kocaeli.
EAE Group of Companies has started its
journey in the electricity sector with EAE
Elektrik, which has founded in 1973.

Export
to more than 100 countries
EAE Group also has distributors and authorized dealers
in more than 100 countries.

3 R&D Centers
280.000 m2 closed There are 3 R&D centers in total,
2 of them are in Kocaeli.
area
EAE group is spread over a total closed area
of 280.000 m2 with its 5 factories.

EAE Globally...
2
EAE Elektroteknik A.Ş.
Active in energy distribution, industrial automation and data processing business EAE Elektroteknik A.Ş. is
committed to continuous innovation to improve performance of installations in infrastructures as well as industrial
and commercial sites.

Throughout its history it has constantly anticipated market changes by developing pioneering designs, providing
solutions that are adapted to customer requirements and fully in compliance with international standards.

EAE Elektroteknik A.Ş. applies lean manufacturing methods throughout its entire operation and follows integrated
management systems.

Employees Manufacturing facility

EAE Elektroteknik has more than EAE Elektroteknik has 20.000m2
260 empolyees. manufacturing facility.

Experience
EAE Elektroteknik has 20 years experience.

3
EAE Elektroteknik
Our solutions…

Type Tested LV Switchgears Data Center Solutions

PanelMaster is a LV high current switchgear KabinPLUS product family serves business in

system designed in a modular structure for infrastructure of information technologies and
adapting to different applications needs. covers data cabinets, cooling solutions and a wide
Modules are individually and the switchgear range of accessories.
system as a whole is type tested and certified KabinPLUS products used in system control rooms
in internationally recognized laboratories. It and data centers comply with various internationally
has been certified by international DEKRA recognized standards of EN, UL and TSE . Their
certification body for successfully passing compatibility has been registered with the
all type tests prescribed by IEC 61439-1/2 documents obtained from accredited laboratories.
standards up to Form 4B, with the highest
Value added solutions with seismic resistance
technical values ​​that businesses and facilities
are also offered within the scope of KabinPLUS
may need and with 6 different internationally
products. KabinPLUS seismic product range includes
accepted brands of switchgear equipment
various products that comply with IEC 60068-3-
separately.
3, IEC 60980 (Nuclear Power Plants) EN 61587-2,
PanelMaster has also passed internal arc tests Telcordia Nebs GR63 Zone 4 standards.
according to IEC 61641 standards and seismic
tests to IEC 60068-3-3 standards and has been
certified by DEKRA for internal arc testing and
VIRLAB laboratories for seismic tests.

4
Type-Tested Empty Electrical Enclosures

E-Kabin LV electrical enclosures are type-tested in

accordance with the IEC 62208 standard to be used
for various applications.

• Wall-Mounted Electrical Enclosures (E-Kabin M, O, E Series)

• Floor-Standing Electrical Enclosures (E-Kabin S, D, L Series)

• Outdoor Electrical Enclosures (E-Kabin H Series)

• Stainless-Steel Electrical Enclosures (E-Kabin X Series)

• Terminal Boxes (E-Kabin T Series)

• Monoblock Consoles (E-Kabin K Series)

5
 General Features…
High Corrosion Resistance
Even if the product is painted, pre-galvanized
steel sheet is used in all products of the
E-Kabin brand.

6
Simplicity
Symmetrical design
Single bolt type

In E-Kabin products, assembly works can be

carried out using a single type of bolt. In this
way, complexity is avoided, manufacturing
processes are accelerated.

Flat-packed Shipment

E-Kabin products are shipped as flat-pack and

part-by-part.

Since many parts can be used with different

products, this gives our customers an
advantage in terms of stock management.

7
 EAE Elektroteknik reserves the right to make changes in the information contained in this catalog without notice.

8
CONTENTS

WALL-MOUNTED ENCLOSURES
O and M Series 11
HM Series Outdoor 19
XM Series Stainless Steel 25
E Series 31
Wall-Mounted Enclosure Accessories 37

TERMINAL BOXES
T Series 59
XT Series Stainless Steel 65
Terminal Box Accessories 69

CONSOLES
K Series 71
Console Accessories 75

FLOOR-STANDING ENCLOSURES
S Series 83
D Series 99
L Series 111
HS Series Outdoor - Modular 123
HF Series Outdoor - Monoblock 129
XS Series Stainless Steel - Modular 135
XH Series Stainless Steel - Monoblock 141
Floor-Standing Enclosure Accessories 147

WHITE PAPERS 199

9
WALL-MOUNTED ENCLOSURES O SERIES - M SERIES

10
E-Kabin O and M Series
Electrical Enclosures

E-Kabin M Series wall-mounted enclosures are designed as Type of Mounting : Wall-Mounted

general purpose electrical equipment enclosures for indoor Modularity : Monoblock
applications. They have monoblock body structure and provide Application : Indoor
IP66 protection degree. The body and door are made of Protection Class : IP 66
pre-galvanized sheet steel and painted with epoxy polyester Paint : Epoxy-Polyester Powder Paint
powder coating. Colour : Standard RAL 7035 (Grey Colour)
Environmental Class : According to EN 60721 - 3 - 3 IE32
Standards : IEC 61439-1, IEC 62208
IEC 60529, IEC 62262

11
Features

Support rails
Support rails increase the strength of the door and
allow attachment of equipment such as cables and
cable trays.

Polyurethane sealing gasket

Foam-in place gasket applied to the door does not lose
its elasticity in time and provides protection against dust
and water.

Useful lock system

The key, which is designed to be attached to the
lock slot if needed, can also be used as a lock
handle.

12
 130° standard door opening
The door can be opened 130° wide with the
standard hinge set, thus full access is provided
during assembly.

130 °

180° Hinge accessory – optional –

The door can be opened 180° with the optional
hinge set.
>180°

Changeable door opening direction Useful bracket

The door opening direction can be changed if it is needed. With the bracket set, the enclosure can be fixed
to the wall easily and quickly. The bracket kit is
included in the standard supply content.

13
Order Codes For EO Series

Enclosure - With Mounting Plate

Enclosure Rated Enclosure Rated Enclosure Rated Order Lock Hinge
Height (A) Width (B) Depth (C) Codes Quantity Quantity

200 150 EO 30 20 15 1 2
300
300 200 EO 30 30 20 1 2
300 150 EO 40 30 15 1 2
400 300 200 EO 40 30 20 1 2
400 200 EO 40 40 20 1 2
350 150 EO 50 35 15 1 2
1 Lock and 2 Hinges
350 200 EO 50 35 20 1 2
500
400 200 EO 50 40 20 1 2
500 200 EO 50 50 20 1 2
400 150 EO 60 40 15 1 2
400 200 EO 60 40 20 1 2
400 300 EO 60 40 30 1 2
600
500 300 EO 60 50 30 1 2
600 200 EO 60 60 20 1 2
600 250 EO 60 60 25 1 2
500 200 EO 70 50 20 2 3
700
500 300 EO 70 50 30 2 3
600 200 EO 80 60 20 2 3
800 600 250 EO 80 60 25 2 3
600 300 EO 80 60 30 2 3
2 Locks and 3 Hinges
Note: Standard supply content: Mounting plate, bracket set, gland plate and earthing cable.

Dimensions

GLAND PLATE COMBINATIONS

For 150 mm Depth For 200, 250 and 300 mm Depth

200 300 350 400 200 300 400

500 600

FLANGE OPENINGS

308 508

117.5 217.5
109

109
72
72

Unless otherwise specified, all dimensions are in mm.

14
Dimensions

B C
20

20
17

A-46

A-5
A

M6

B-46

B-40

B+60
Ø13 Ø9
A+60

A-40
B-5

,5
R4
8

R6
,5
23
76
51

20
A-55

Ø9
25

B-124 Ø2,5 35

B-91

10
13

Usable area
Unless otherwise specified, all dimensions are in mm.

15
Order Codes For EM Series

Enclosure - With Mounting Plate, Plain Door

Enclosure Rated Enclosure Rated Enclosure Rated Lock Hinge
Order Codes
Height (A) Width (B) Depth (C) Quantity Quantity

800 800 300 EM 80 80 30 D 2 3

900 600 300 EM 90 60 30 D 2 3
600 300 EM 100 60 30 D 2 3
700 300 EM 100 70 30 D 2 3
1000
800 300 EM 100 80 30 D 2 3
800 400 EM 100 80 40 D 2 3
600 300 EM 120 60 30 D 2 3
1200 800 300 EM 120 80 30 D 2 3
800 400 EM 120 80 40 D 2 3
2 Locks and 3 Hinges
Note: You can get information from your Customer Representative for large quantities and
different sizes.

Overlapping, Plain Door

Enclosure Rated Enclosure Rated Enclosure Rated
Order Codes
Height (A) Width (B) Depth (C)

1000 1000 300 EM 100 100 30

1000 300 EM 120 100 30
1200 1000 400 EM 120 100 40
1200 300 EM 120 120 30

Note: Standard supply content: Mounting plate, bracket set, gland plate and earthing cable.
Note: You can get information from your Customer Representative for large quantities and
different sizes.
Protection class is IP 54 for products with overlapping doors

Dimensions

GLAND PLATE COMBINATIONS

For 300 and 400 mm Depth FLANGE OPENINGS

308
109

1200 1000

508
109

800 700 600

Unless otherwise specified, all dimensions are in mm.

16
Dimensions

20

20
B C

17 B-124

A-55
A-46

A-5
A

B-91

M6

B-46 Usable area

,5
R4

8
R6

25
,5

23
Ø2,5
B-5
76
51

20
B-40 Ø9
B+60
Ø13 Ø9 10
35
A+60

13
A-40

B C
20

20
18
A-45

A-6
A

B-46

B-664

B-664
25

B-6 Ø4.6
A-56

A-56

Unless otherwise specified, all dimensions are in mm.

17
 HM SERIES
WALL-MOUNTED ENCLOSURES
Outdoor

18
E-Kabin HM Series
Outdoor Electrical Enclosures

E-Kabin HM Series wall-mounted enclosures are designed as Type of Mounting : Wall-Mounted

general purpose electrical equipment enclosures for outdoor Modularity : Monoblock
applications. They have monoblock body structure and provide Application : Outdoor
IP66 protection degree. All parts that come into contact with Protection Class : IP 66
external enviroment are made of pre-galvanized sheet steel and Paint : High corrosion resistant paint
coated first with primer paint then with electrostatic powder according to ISO 12944-2
paint. Welded surfaces have smooth and clean appearance. Colour : Standard RAL 7035 (Grey Colour)
Environmental Class : According to EN 60721 - 3 - 3 IE37
Standards : IEC 61439-1, IEC 62208
IEC 60529, IEC 62262

19
Features

Stainless-steel hinge
Hinge body and pin made of stainless-steel material are
used as standard.

Polyurethane sealing gasket

Foam-in-place gasket, does not lose its elasticity over
time and provides protection against dust and water.
DEĞ
O
FOT LANM
PAS

Asymmetrical canopy
It allows the use of bracket for wall mounting. Thanks
to their reverse angle edge design above door threshold,
rain water flows out of the enclosure.

20
 Standard Door Opening 130°
The door can be opened 130° wide with the standard
hinge set, thus full access is provided during assembly.

130 °

Stainless-steel bracket accessory

ECEK ET
ĞİŞ BRAK
Stainless Bracket Accessory provides additional protection
against corrosion.
Z
MA

Plinth
In applications where mounting on the floor is required,
plinth set accessory can be used additionally.

21
Order Codes

Enclosure Rated Enclosure Rated Enclosure Rated Lock Hinge

Order Codes
Height (A) Width (B) Depth (C) Quantity Quantity

700 500 300 HM 70 50 30 2 3

900 600 300 HM 90 60 30 2 3
1000 800 400 HM 100 80 40 2 3
1200 800 400 HM 120 80 40 2 3

Note: Asymmetrical canopy module and mounting plate are included in standard supply content.

Dimensions

GLAND PLATE COMBINATIONS

For 300 and 400 mm Depth FLANGE OPENINGS

308

109
500 600

508
109

800

Unless otherwise specified, all dimensions are in mm.

22
Dimensions

B C B+9

20
20

22
17

A-46

A+55
A+17
A-5
A

M6

300

B+9
B-46

22

B-5

A+72
A+17
400
A-55

25

Ø4,6
B-163

24
19

Usable area

.5
R4
8

B-40 R6
.5
22

B+60
50
80

Ø13 Ø9
A+60

20
A-40

Ø9

35
Unless otherwise specified, all dimensions are in mm.

23
 XM SERIES
WALL-MOUNTED ENCLOSURES
Stainless Steel

24
E-Kabin XM Series
Stainless-Steel Electrical Enclosures

E-Kabin XM Series wall mounted stainless electrical enclosures Type of Mounting : Wall-Mounted
are designed as general purpose electrical equipment Modularity : Monoblock
enclosures for indoor and outdoor applications. They have Application : Indoor, Outdoor
monoblock body structure and provide IP66 protection degree. Protection Class : IP 66
Standard production does not include painting process. Standards : IEC 61439-1, IEC 62208
However, custom-made production, varnished or painted in the IEC 60529, IEC 62262
desired RAL code is possible. Environmental Class : According to EN 60721 - 3 - 3 IE37
Material : AISI 304 or 316 grade stainless-steel
XM Series stainless-steel enclosures can be produced with AISI Lock Set : Plastic - standard
304 or 316 grade raw material. Plastic lock is used in XM Series. Stainless-steel - optional
Optionally, a lock made of 304 or 316 grade stainless-steel can
also be used.

All E-Kabin interior accessories are designed to be suitable for

use in stainless-steel enclosures as well.

While keeping standard product design unchanged, size

modification, material thickness modification and cut-outs can
be applied if requested.

25
Features

Polyurethane sealing gasket

Foam-in-place gasket, does not lose its elasticity over time
and provides protection against dust and water.

Asymmetrical canopy
It allows the use of bracket for wall mounting. Thanks
to their reverse angle edge design above door threshold,
rain water flows out of the enclosure.

Optional Stainless-steel lock

Instead of plastic lock, which has high chemical
resistance, optionally AISI 316 grade stainless-steel lock
can be used. Mounted AISI 316 grade lock do not exceed
a'= a+n.50 mm
the door level.
b'= b+n.50 mm

Possibility of custom size production

Non-standard, custom size manufacturing is possible.
* For details, you can get information from your
Customer Representative.

26
 Stainless-steel hinge
Hinge body and pin made of Stainless-Steel material are
used as standard.

Possibility of custom-made cut-outs

Custom-made cut-out processing on the door and
body is applicable.

Optional stainless-steel bracket

With bracket set enclosure mounting on the wall can
be done easily and quickly. Thanks to 90° swivel feature
of the bracket, it’s positioning can be chosen either
horizontally or vertically. Bracket set is not included in
standard supply content, it should be ordered separately.

Clean surface texture

In the production of stainless-steel enclosures, the
welding process is applied in a way that does not leave
any traces. Thus, clean and smooth surface appearance
has been provided for welded surfaces.

27
Order Codes

XM Series Stainless-Steel Monoblock Enclosures

Enclosure Rated Enclosure Rated Enclosure Rated Order Order Lock Hinge
Height (A) Width (B) Depth (C) Codes (304) Codes (316) Quantity Quantity

300 200 XM 40 30 20 D 304 XM 40 30 20 D 316 1 2

400
600 200 XM 40 60 20 D 304 XM 40 60 20 D 316 1 2
500 400 200 XM 50 40 20 D 304 XM 50 40 20 D 316 1 2
400 200 XM 60 40 20 D 304 XM 60 40 20 D 316 1 2
600
600 300 XM 60 60 30 D 304 XM 60 60 30 D 316 1 2
500 200 XM 70 50 20 D 304 XM 70 50 20 D 316 1 2
700
500 300 XM 70 50 30 D 304 XM 70 50 30 D 316 1 2
600 200 XM 80 60 20 D 304 XM 80 60 20 D 316 2 3
800 600 300 XM 80 60 30 D 304 XM 80 60 30 D 316 2 3
800 200 XM 80 80 20 D 304 XM 80 80 20 D 316 2 3
600 200 XM 100 60 20 D 304 XM 100 60 20 D 316 2 3
1000 600 300 XM 100 60 30 D 304 XM 100 60 30 D 316 2 3
800 200 XM 100 80 20 D 304 XM 100 80 20 D 316 2 3
1200 600 300 XM 120 60 30 D 304 XM 120 60 30 D 316 2 3

Note: Standard lock is plastic. If stainless-steel lock is requested, please indicate it in your purchase order.
Mounting plate is included in the standard supply content. Bracket set is not included in the standard supply content.

XM Series Stainless-Steel Monoblock Enclosures With Asymmetrical Canopy

Enclosure Rated Enclosure Rated Enclosure Rated Order Order Lock Hinge
Height (A) Width (B) Depth (C) Codes (304) Codes (316) Quantity Quantity

300 200 XM 40 30 20 AC 304 XM 40 30 20 AC 316 1 2

400
600 200 XM 40 60 20 AC 304 XM 40 60 20 AC 316 1 2
500 400 200 XM 50 40 20 AC 304 XM 50 40 20 AC 316 1 2
400 200 XM 60 40 20 AC 304 XM 60 40 20 AC 316 1 2
600
600 300 XM 60 60 30 AC 304 XM 60 60 30 AC 316 1 2
500 200 XM 70 50 20 AC 304 XM 70 50 20 AC 316 1 2
700
500 300 XM 70 50 30 AC 304 XM 70 50 30 AC 316 1 2
600 200 XM 80 60 20 AC 304 XM 80 60 20 AC 316 2 3
800 600 300 XM 80 60 30 AC 304 XM 80 60 30 AC 316 2 3
800 200 XM 80 80 20 AC 304 XM 80 80 20 AC 316 2 3
600 200 XM 100 60 20 AC 304 XM 100 60 20 AC 316 2 3
1000 600 300 XM 100 60 30 AC 304 XM 100 60 30 AC 316 2 3
800 200 XM 100 80 20 AC 304 XM 100 80 20 AC 316 2 3
1200 600 300 XM 120 60 30 AC 304 XM 120 60 30 AC 316 2 3

Note: Standard lock is plastic. If stainless-steel lock is requested, please indicate it in your purchase order.
Mounting plate is included in the standard supply content. Bracket set is not included in the standard supply content.

Unless otherwise specified, all dimensions are in mm.

28
Dimensions

B C

A-46

A-5
A

M6

B-46

B-5
B-40

B+60
Ø13 Ø9
A+60

A-40

69 46
.5
R4
A-54

B-121
R6
.5
22
50
80

20

Usable area Ø9

35
Unless otherwise specified, all dimensions are in mm.

29
 E SERIES
WALL-MOUNTED ENCLOSURES
Distribution Boards

30
E-Kabin E Series
Distribution Boards

E-Kabin E Series, distribution boards are especially designed Type of Mounting : Stand Alone & Wall-Mounted /
for indoor electrical installation applications of buildings such Wall-Mounted
as shopping malls, hotels, hospitals etc. Their design is suitable Modularity : Monoblock
for installation of DIN-rail type devices. With their monoblock Application : Indoor
body structure they can ensure IP 55 protection degree. The Protection Class : IP 55
body is made of pre-galvanized steel sheet with epoxy polyester Paint : Epoxy-Polyester Powder Paint
powder paint applied. Colour : Standard RAL 7035 (Grey Colour)
Environmental Class : According to EN 60721 - 3 - 3 IE32
Standards : IEC 61439-1, IEC 62208
IEC 60529, IEC 62262

31
Features

In-door support rails

In-door support rails increase the strength of the door
and allow attachment of equipment such as cables and
cable trays.

Polyurethane sealing gasket

Foam-in place gasket applied to the door does not
loose its elasticity in time and provides protection
against dust and water.

Glazed door application Deep gap between door and cover plate
Tempered glass door can be selected optionally. 100 mm gap between the door and the cover plate allows
the installation of accessories such as measuring devices,
signal lamps, etc. on the door.
100

16.5
121
150

32
Hinged cover plates 180° Wide openable door
Cover plates are manufactured as hinged and openable. The door can be opened 180° wide with the standard
Thus, it is possible to intervene without removing the hinge set, thus full access is provided during assembly.
cover plate.
>180°

Easy planning
Thanks to the standard width, 24/36 pieces of 18
mm units width devices can be used on each row.

24 Units - 60 cm rated width

36 Units - 80 cm rated width

Useful bracket Changeable door opening direction

With the bracket set, the enclosure can be fixed to the The door opening direction can be changed if it is
wall easily and quickly. needed.

33
Order Codes

EE Series Wall-Mounted Enclosures

Enclosure Rated Enclosure Rated Enclosure Rated
Order Codes
Height (A) Width (B) Depth (C)

500 600 250 EE 50 60 25 D (C)

650 600 250 EE 65 60 25 D (C)
800 600 250 EE 80 60 25 D (C)
950 600 250 EE 95 60 25 D (C)
1100 600 250 EE 110 60 25 D (C)
1250 600 250 EE 125 60 25 D (C)
800 800 250 EE 80 80 25 D (C)
950 800 250 EE 95 80 25 D (C)
1100 800 250 EE 110 80 25 D (C)
1250 800 250 EE 125 80 25 D (C)

EE Series Floor-Standing & Wall-Mounted Enclosures

Enclosure Rated Enclosure Rated Enclosure Rated
Order Codes
Height (A) Width (B) Depth (C)

1800 600 250 EE 180 60 25 D

1800 800 250 EE 180 60 25 D
2000 600 250 EE 200 60 25 D
2000 800 250 EE 200 80 25 D

D - Blank door C - Glazed door

Unless otherwise specified, all dimensions are in mm.

34
Dimensions

B 300 20
C

27
31
A+50

100

16.5
250

124
127
100

50
145

B-92

B C

20 B-40
29.5
B+60
Ø13 Ø9
A+60

A-40
A

34
10

DETAIL A

B-5
Unless otherwise specified, all dimensions are in mm.

35
 WALL-MOUNTED
WALL-MOUNTED ENCLOSURES ENCLOSURES ACCESSORIES

36
Internal Mounting Accessories Partial Mounting Plate - EE MP 38
Partial Mounting Plate - EM MP 39
Galvanized Rail Set - EE RSS 40
Aluminum Rail Set - EE RSA 40
Special Mounting Plate - EE TB 41
Front Cover Plates and Accessories Full Height Cover Plate - EM OB 42
Depth Adjustment System - EM DS 42
Cover Plate With Hinges - EG OM 43
Cover Plate Seal Kit - EG OMM 44
Cover Plate Screw Connection Kit - EG OMV 44
Cover Plate Standard Hinge Kit - EG OMT 44
Ventilation Accessories Fan-Filter Unit - EG FAN 45
Filter Unit - EG FIL 45
Spare Filter - EG FS 45
Thermostat - EG ET 46
Fan-Filter Unit With Thermostat - EG FAT 46
Plinth and Cable Entry Accessories Plinth Set - HM BZ 47
Plinth Set - XM BZ 47
Cable Attachment Rail - EE KTP 48
Gland Plate with Brush - EG FR 48
Locks Lock Set - EM KT 49
Wing-Knob Lock Set - HM KT 49
Stainless-Steel Lock Set - XM KT 49
Document Pockets Project Document Pocket - EM SC 50
Project Document Pocket - EE SC 50
Project Document Pocket - EG PC 51
Other Accessories Bracket Set - EO BS 52
Stainless-Steel Bracket Set - XM BS 52
Support Rail - EM KP 53
Support Rail - EE KP 53
180° Opening Hinge - EM TA 54
Wall Mounting Rail - EE DM 54
Cable Duct - EE KB 55
Adjustable Fixing Kit - EE AYT 55
M5x8 Self-Tapping Screw - EG CK 5 56
Snap-on Gasket - EG GC 56

37
Internal Mounting Accessories

Partial Mounting Plate - EE MP

Height is adjustable. It is designed for general usage.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 1 piece of Mounting plate
1 piece of Connection and fixing set

Applicable
Product Rated Available Product
Order Codes
Series Height Width

600 EE MP 0560
50
800 EE MP 0580
600 EE MP 1560
150
800 EE MP 1580

AVAILABLE MOUNTING WIDTH (mm) 600 EE MP 2060

200
800 EE MP 2080
PRODUCT RATED

600 EE MP 2560
HEIGHT (mm)

250
800 EE MP 2580
600 EE MP 3060
300
800 EE MP 3080
600 EE MP 3560
350
800 EE MP 3580
600 EE MP 4060
400
800 EE MP 4080

Unless otherwise specified, all dimensions are in mm.

38
Partial Mounting Plate - EM MP
It is designed for general usage.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 1 piece of Mounting plate
1 piece of Connection and fixing set

Applicable
Series

AVAILABLE MOUNTING WIDTH (mm)

PRODUCT RATED
HEIGHT (mm)

Warning: Used with EM DS

Product Available Product Available

Rated Product Order Codes Rated Product Order Codes
Height Width Height Width

300 EM MP 0530 400 EM MP 3040

400 EM MP 0540 500 EM MP 3050
300
50 500 EM MP 0550 600 EM MP 3060
600 EM MP 0560 800 EM MP 3080
800 EM MP 0580 400 EM MP 4040
300 EM MP 1030 500 EM MP 4050
400
400 EM MP 1040 600 EM MP 4060
100 500 EM MP 1050 800 EM MP 4080
600 EM MP 1060 400 EM MP 5040
800 EM MP 1080 500 EM MP 5050
500
300 EM MP 1530 600 EM MP 5060
400 EM MP 1540 800 EM MP 5080
150 500 EM MP 1550 400 EM MP 6040
600 EM MP 1560 500 EM MP 6050
600
800 EM MP 1580 600 EM MP 6060
400 EM MP 2040 800 EM MP 6080
500 EM MP 2050
200
600 EM MP 2060
800 EM MP 2080
400 EM MP 2540
500 EM MP 2550
250
600 EM MP 2560
800 EM MP 2580

Unless otherwise specified, all dimensions are in mm.

39
Internal Mounting Accessories

Galvanized Rail Set - EE RSS

It is designed for parts that can be mounted on a DIN rail.

• Suitable for 600 wide enclosure. 24 MCBs can be used side by side.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 1 piece of DIN MCB rail
1 piece of Fixing kit

Applicable
Series

Galvanized rail set

Product Rated Width Order Code

600 EE RSS 60

Aluminum Rail Set - EE RSA

It is designed for parts that can be mounted on a DIN rail.

Material : Aluminium
Surface : -
Content : 1 piece of aluminum MCB rail
1 piece of Fixing set

Applicable
Series

49
Aluminum rail kit 35
Product Rated Width Order Code

600 EE RSA 60
10

800 EE RSA 80

43

Unless otherwise specified, all dimensions are in mm.

40
Special Mounting Plate - EE TB
It is designed for capacitor mounting in compensation panels or in accordance
with the purpose of partitioning.

Material : Pre-Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 1 piece of Carrier compartment
4 pieces of M5x8 self-tapping screw

Applicable
Series

Special mounting plate

Product Rated Width Order Code

600 EE TB 60
800 EE TB 80

Unless otherwise specified, all dimensions are in mm.

41
Front Cover Plates and Accessories

Full Height Cover Plate - EM OB

It is designed for situations when interior door application is desired.

• The full height cover plate can be opened 90 degrees in its assembled position.

• Not suitable for use with the EM DS depth adjustment system.

Material : Galvanized steel sheet

Surface : RAL 7035 (Grey Colour)
Content : 1 piece of Full height cover plate with hinge
2 pieces of Height connection rails
2 pieces of Width connection rails
1 piece of Fittings set

Applicable
Series

Applicable Enclosure Applicable Enclosure

Order Codes Order Codes
Dimensions - HxW Dimensions - HxW

500x400 EM OB 50 40 900x600 EM OB 90 60
600x400 EM OB 60 40 1000x600 EM OB 100 60
600x600 EM OB 60 60 1000x700 EM OB 100 70
700x500 EM OB 70 50 1000x800 EM OB 100 80
800x600 EM OB 80 60 1200x600 EM OB 120 60
800x800 EM OB 80 80 1200x800 EM OB 120 80

Depth Adjustment System - EM DS

It is designed for front cover plate and partial mounting plate applications.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 2 pieces of Depth adjustment profiles
2 pieces of Width connection rails
2 pieces of Cover plate connection rails
1 piece of Fittings set

Applicable
Series

Enclosure Rated Enclosure Rated Enclosure Rated

Order Codes
Height Width Depth

500 400 200 EM DS 50 40 20

600 400 200 EM DS 60 40 20
700 500 200 EM DS 70 50 20
700 500 300 EM DS 70 50 30
800 600 200 EM DS 80 60 20
800 600 300 EM DS 80 60 30
800 800 300 EM DS 80 80 30
1000 600 300 EM DS 100 60 30
1200 600 300 EM DS 120 60 30
Unless otherwise specified, all dimensions are in mm.

42
Cover Plate With Hinges - EG OM
It is designed for general use. It has a hinged structure.

Material : Galvanized steel sheet

Surface : RAL 7035 (Grey Colour)
Content : 1 piece of Cover plate
1 piece of Fittings set

Applicable
Series

A- Slotted for MCBs F- With ventilation grills

Product Product
Product Product
Width Width
Rated Order Codes Rated Order Codes
Suitable for Suitable for
Height Height
Mounting Mounting

400 EG OM 1004 400 EG OM 4504

500 EG OM 1005 500 EG OM 4505
100 600 EG OM 1006 450 600 EG OM 4506
700 EG OM 1007 700 EG OM 4507
800 EG OM 1008 800 EG OM 4508
400 EG OM 1504 (A,F) 400 EG OM 5004
500 EG OM 1505 (A,F) 500 EG OM 5005
150 600 EG OM 1506 (A,F) 500 600 EG OM 5006
700 EG OM 1507 (A,F) 700 EG OM 5007
800 EG OM 1508 (A,F) 800 EG OM 5008
400 EG OM 2004 (A,F) 400 EG OM 5504
500 EG OM 2005 (A,F) 500 EG OM 5505
200 600 EG OM 2006 (A,F) 550 600 EG OM 5506
700 EG OM 2007 (A,F) 700 EG OM 5507
800 EG OM 2008 (A,F) 800 EG OM 5508
400 EG OM 2504 400 EG OM 6504
500 EG OM 2505 500 EG OM 6505
250 600 EG OM 2506 650 600 EG OM 6506
700 EG OM 2507 700 EG OM 6507
800 EG OM 2508 800 EG OM 6508
400 EG OM 3004 400 EG OM 7504
500 EG OM 3005 500 EG OM 7505
300 600 EG OM 3006 750 600 EG OM 7506
700 EG OM 3007 700 EG OM 7507
800 EG OM 3008 800 EG OM 7508
400 EG OM 3504
500 EG OM 3505
350 600 EG OM 3506
700 EG OM 3507
800 EG OM 3508
Unless otherwise specified, all dimensions are in mm.

43
 Front Cover Plates and Accessories

Cover Plate Seal Kit - EG OMM

It is designed for sealing cover plates.

Material : Steel sheet

Surface : Galvanized coating
Content : 1 piece of Fixing part
1 piece of Fittings pack
Applicable
Series : Used with EG OM.

Cover plate seal kit

Order Code EG OMM

Cover Plate Screw Connection Kit - EG OMV

It is designed to be used when the screw connection is required for cover
plates connections.

Content : 10 pieces of M6 special bolts

10 pieces of M6 cage nuts
10 pieces of Plastic safety washers

Applicable
Series : Used with EG OM.

Cover plate screw connection kit

Order Code EG OMV

Cover Plate Standard Hinge Kit - EG OMT

It is included in standard supply content.

Material : Steel sheet

Surface : Galvanized coating
Content : 2 pieces of Hinge
1 piece of Fittings pack

Applicable
Series : Used with EG OM.

Cover plate standard hinge kit

Order Code EG OMT

44 44
Ventilation Accessories

Fan-Filter Unit - EG FAN

It is designed for cooling when the ambient temperature is lower than the
interior temperature of the enclosure.

• Quick and easy assembly without tools

• Quick and easy filter change from outside
• IP44 protection class

Material : Plastic
Surface : RAL 7035 (Grey Colour)
Content : 1 piece of plastic filtered fan

Applicable
Series

Fan-filter unit
Order Product Voltage Frequency Flow Power Noise Level Fan Flow
Code Dimension V Hz A W dBA m3/h

EG FAN 12 150x150 220/240 50/60 0,14 21 48 82

EG FAN 25 250x250 220/240 50/60 0,22 38 59 300

Roller bearing motors are used in fan.

Fan-filter unit
Order Code B1 x H1 mm B2 x H2 mm T1 mm T2 mm

EG FIL-FAN 12 150x150 123x123 13 67

EG FIL-FAN 25 250x250 223x223 13 115

Filter Unit - EG FIL

It is designed for cooling when the ambient temperature is lower than the
interior temperature of the enclosure.

• Quick and easy assembly without tools

• Quick and easy filter change from outside
• IP44 protection class

Material : Plastic
Surface : RAL 7035 (Grey Colour)
Content : 1 piece of plastic filtered louvre
Applicable
Series

Filter unit
Product Dimension Protection Class Order code

150x150 IP44 EG FIL 12 44

250x250 IP44 EG FIL 25 44

Spare Filter - EG FS
It is designed to be used as a spare in filtered louvres.

• Washable, • G2 class
Spare Filter (IP44)
Product Dimension Order code

125x125 EG FS 12 44
250x250 EG FS 25 44 Unless otherwise specified, all dimensions are in mm.

45
 Ventilation Accessories

Thermostat - EG ET
It is used to control the fans that can be operated in case the temperature
inside the enclosure increases.

• 0-60 ºC temperature setting range

• Quick and easy mounting feature, suitable for 35 mm DIN rail

Material : ABS UL94 V0 Flame retardant

Content :
1 piece of Thermostat

Applicable
Series

Thermostat
Order Code EG ET 01

Fan-Filter Unit With Thermostat - EG FAT

It is designed for cooling when the ambient temperature is lower than the
interior temperature of the enclosure.

• 0-60 ºC temperature setting range

• Integrated ON/OFF switch.

Material : Plastic
Content :
1 piece of Filtered fan with thermostat

Applicable
Series

Fan-filter unit with thermostat

Order Code EG FAT 12
EG FAT 25

Note: For fan and filter details, please check product pages with EG FAN and
EG FIL codes.

Unless otherwise specified, all dimensions are in mm.

46
Plinth and Cable Entry Accessories

Plinth Set - HM BZ
It is designed to connect the enclosure to the ground and to arrange the
cable entry-exit.

Material : Galvanized steel sheet

Surface : Ral 9005 (Black Colour)
Content : 2 pieces of Width plinth trim panels
2 pieces of Depth plinth trim panels
4 pieces of M8x20 hex screw
M6x20 allen bolt

Applicable
Series
Plinth Set
Enclosure Rated Enclosure Rated Enclosure Rated Enclosure Rated
Order Code Order Code
Width Depth Width Depth

300 150 HM BZ 30 15 600 250 HM BZ 60 25

300 200 HM BZ 30 20 600 300 HM BZ 60 30
350 150 HM BZ 35 15 700 300 HM BZ 70 30
400 150 HM BZ 40 15 800 300 HM BZ 80 30
400 200 HM BZ 40 20 800 400 HM BZ 80 40
500 200 HM BZ 50 20 1000 300 HM BZ 100 30
500 300 HM BZ 50 30 1000 400 HM BZ 100 40
600 200 HM BZ 60 20 1200 300 HM BZ 120 30

Note: Installation shall be done by the customer by drilling the bottom part of the enclosure.

Plinth Set - XM BZ
It is designed to connect the enclosure to the ground and to arrange the
cable entry-exit.

Material : AISI 304 grade stainless-steel

Surface :-
Content : 2 Width plinth trim panels
2 pieces of Depth plinth trim panels
4 pieces of M8x20 Stainless hex screw
M6x20 Stainless allen bolt

Applicable
Series
Plinth Set
Enclosure Rated Enclosure Rated
Order Code
Width Depth

300 200 XM BZ 30 20
400 200 XM BZ 40 20
500 200 XM BZ 50 20
500 300 XM BZ 50 30
600 200 XM BZ 60 20
600 300 XM BZ 60 30
800 200 XM BZ 80 20
800 300 XM BZ 80 30

Note: Installation shall be done by the customer by drilling the bottom part of the enclosure.

Unless otherwise specified, all dimensions are in mm.

47
 Plinth and Cable Entry Accessories

Cable Attachment Rail - EE KTP

It is designed to fix the panel incomming cables.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content :
1 piece of Cable attachment rail
2 pieces of M5x8 self-tapping screw

Applicable
Series

Cable Attachment Rail

Enclosure Rated Width Order Code

600 EE KTP 60
800 EE KTP 80

Gland Plate With Brush - EG FR

It is used for multiple cable transits from the cable entry plates of the panels.

50 Material : Galvanized steel sheet

Surface : Black colour
Content :
1 piece of Gland plate
2 pieces of PVC brushes
1 piece of Fittings pack

Applicable
Series

Gland plate with brush

Gland Plate Rated Dimension Size A Order Code

400 300 EG FR 40
600 500 EG FR 60

Note: In case of using a gland plate with brush, the IP protection level of the
enclosure will decrease to IP 00.

Unless otherwise specified, all dimensions are in mm.

48
Locks

Lock Set - EM KT
It is suitable for the lock recess on the door.

Material : Plastic, Zamak

Surface : Black colour
Content : 1 piece of Lock

Applicable
Series

Plastic, keyless Encrypted, keyed Padlock type

wing-knob lock Zamak lock Zamak lock
Order Code Order Code Order Code EM KT 09 EM KT 12 EM KT 13
EM KT 09 EM KT 12 (Eurokey 333) EM KT 13

Wing-Knob Lock Set - HM KT

It is suitable for the lock recess on the door.

Material : Zamak
Surface : Black colour
Content : 1 piece of Black colour wing-knob lock
(Eurokey 333)

Applicable
Series
Wing-knob lock set
Order Code HM KT

Stainless-Steel Lock Set - XM KT

In stainless-steel enclosures, It is suitable for the lock recess on the door.

Material : Stainless-steel
Content : 1 piece of ø3 mm Double bit lock

Applicable
Series

Stainless-Steel lock
Stainless-Steel Grade Order Code

304 XM KT 12
316 XM KT 13

Unless otherwise specified, all dimensions are in mm.

49
 Document Pockets

Project Document Pocket - EM SC

It is designed to store drawings.

Material : Galvanized steel sheet

Surface : Ral 9005 Black colour
Content : 1 piece of Sheet metal document pocket
2 pieces of 3.9x13 sheet metal screws

Applicable
Series

Project document pocket

Enclosure Rated Width Order Code

400 EM SC 40
500 EM SC 50
600 EM SC 60
700 EM SC 70
800 EM SC 80

Project Document Pocket - EE SC

It is designed to store drawings.

Material : Galvanized steel sheet

Surface : Ral 9005 black colour
Content : 1 piece of Pre-galvanized steel sheet document pocket.
2 pieces of 3.9x13 sheet metal screws

Applicable
Series

Project document pocket

Enclosure Rated Width Order Code

600 EE SC 60
800 EE SC 80

Unless otherwise specified, all dimensions are in mm.

50
Project Document Pocket - EG PC
It has the feature of sticking with self-adhesive double-sided tape suitable for 241

A4 paper size. It can be fixed with bolts if desired.

Material : Plastic
Surface : Black colour
Content : 1 piece of Plastic document pocket

234
Applicable
Series

257 31

Project document pocket

Order Code EG PC

Unless otherwise specified, all dimensions are in mm.

51 51
Other Accessories

Bracket Set - EO BS
It is designed for easy and quick mounting of the enclosure to the wall.

Material : Steel sheet

Surface : Electro galvanized coating
Content : 4 pieces of Bracket Pieces
4 pieces of M8x20 hex head screw
4 pieces of M8 Washers
4 pieces of Sealing gaskets

Applicable
Series

,5
R4

8
Bracket set
R6
,5
EO BS

23
Order Code

76
51

20
Ø9

35

Stainless-Steel Bracket Set - XM BS

It is designed to mount the enclosure on the wall easily and quickly.

Material : AISI 316 grade stainless-steel

Surface : Electro polishing
Content : 4 pieces of stainless brackets
4 pieces of M8x20 Stainless hex head screw
4 pieces of M8 Stainless washer
4 pieces of Sealing gaskets

Applicable
Series

,5
R4

Stainless-Steel bracket set

8

Order Code XM BS R6
,5
22
80
50

20

Ø9

35

Unless otherwise specified, all dimensions are in mm.

52
Support Rail - EM KP
It is designed to organize the cables inside the door. It is selected according to
the door width.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 1 piece of Support rail
2 pieces of 3.9x13 sheet metal screws

Applicable
Series

Support rail
Enclosure Rated Width Order Code

300 EM KP 30
350 EM KP 35
400 EM KP 40
500 EM KP 50
600 EM KP 60
700 EM KP 70
800 EM KP 80

Support Rail - EE KP
It is designed to organize the cables inside the door. It is selected according to
the door width.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 1 piece of Support rail
2 pieces of 3.9x13 sheet metal screws

Applicable
Series

Support rail
Enclosure Rated Width Order code

600 EE KP 60
800 EE KP 80

Unless otherwise specified, all dimensions are in mm.

53
Other Accessories

180º Opening Hinge - EM TA

It is designed to be used when the door needs to be opened 180 degrees.

Material : Zamak
Content : EM TA 180° hinge

Applicable
Series

180º opening hinge

Enclosure Rated Height Number of Hinge Order Code

<700 2 EM TA 2M
≥700 3 EM TA 3M

Wall Mounting Rail - EE DM

It allows cables to be carried to the upper part with the cable tray in case
of cable entry-exit from the bottom of the product.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Conrtent : 2 pieces of Wall mounting rails
4 pieces of M8x20 hex head screw
4 pieces of M8 Washers

Applicable
Series

Wall mounting profile

Enclosure Rated Height Order Code

500 EE DM 050
650 EE DM 065
800 EE DM 080
950 EE DM 095
1100 EE DM 110
1250 EE DM 125

54
Cable Duct - EE KB
It is designed for the visual arrangement of the cable outgoing area.

Material : Galvanized steel sheet

Surface : RAL 7035 (Grey Colour)
Content : 1 piece of Cable duct
4 pieces of M6x15 hex head screw
4 pieces of M6 Special-skirt nut
4 pieces of M6 Washers

Applicable
Series

Cable duct
Enclosure Rated Width Order Code

600 EE KB 060
800 EE KB 080

Note: Installation is done by the customer by drilling the enclosure.

Adjustable Fixing Kit - EE AYT

It is designed for independently adjusting the height on the mounting plate
when required.

Material : Galvanized steel sheet

Content : 2 pieces of EG AYT Lower fixings
2 pieces of EG AYT Upper fixings
8 pieces of M5x8 Self-tapping screw

Applicable
Series

Adjustable fixing kit

Order Code EE AYT

Note: Height adjustment can be made in

5 mm steps between 45 mm and 70 mm.

55
Other Accessories

M5x8 Self-Tapping Screw - EG CK 5

Special spiral metric thread structure. It has self-tapping feature for sheet
metal surface.

Material : Steel
Surface : Galvanized coating
Content : 100 pieces of M5x8 self-tapping screw

Applicable
Series

M5x8 self-tapping screw

Order Code EG CK 5

Snap-On Gasket - EG GC
It is designed to prevent damages from sharp surfaces.

• Can be used by cutting to desired size

• It has a clawed structure that provides ease of assembly.

15
Material : PVC
15 10
Surface : Black colour
Content : Shown as in the table below.
10
Applicable
Series 6.9

EG GC 01
9.4

5.3
Snap-on gasket 2
Sheet
Content Wire-Reinforced Order Code
Range
2

3 meters 1.0 - 2.0 mm Yes EG GC 01

8

4 meters 0.8 - 1.5 mm No EG GC 02

0.5
EG GC 02

56
57
TERMINAL BOXES T SERIES

58
E-Kabin T Series
Terminal Boxes

E-Kabin T Series terminal boxes are designed as general purpose Type of Mounting : Wall-Mounted
electrical equipment enclosures for indoor applications. They Modularity : Monoblock
have monoblock body structure and provide IP66 protection Application : Indoor
degree. The body and door are made of pre-galvanized sheet Protection Class : IP 66
steel and painted with epoxy polyester powder coating. Paint : Epoxy - polyester powder paint
Colour : Standard RAL 7035 (Grey Colour)
Environmental Class : According to EN 60721 - 3 - 3 IE32
Standards : IEC 62208, IEC 60529,
IEC 62262

59
Features

Quarter-turn lock
With the quarter-turn lock, the door can be opened and
closed easily.

Polyurethane sealing gasket

Foam-in place gasket applied to the door does not lose
its elasticity in time and provides protection against dust
and water.

Possibility of custom-made cut-outs

For high quantity orders, custom-made cut-out processing
on door and body is applicable.

* For details, you can get information from your

customer representative.

60
Wide access to box
The design of the box opening prevents installation space
losses and provides ease of access and installation inside
the box.

Practical mounting plate

Design of the mounting plate allows to evaluate the
usable space inside the box with minimum loss.

Useful bracket accessory

With the bracket set, the box can be mounted to the
wall easily and quickly. By turning the bracket 90°,
mounting flexibility is provided. The bracket set, which is
not included in the standard box, must be ordered sepa-
rately when requested.

61
Order Codes

Enclosure Rated Enclosure Rated Enclosure Rated Order

Height (B) Width (A) Depth (C) Codes

200 200 120 ET 20 20

200 300 120 ET 20 30
200 400 120 ET 20 40
300 300 120 ET 30 30
300 400 120 ET 30 40
400 400 120 ET 40 40
Note: The mounting plate is included in the order content; bracket set is excluded.

Dimensions

,5
R4
B-40

B+60
8

Ø13 Ø9 R6
,5
A+60

23
76
51
A-40

20

Ø9

35
Unless otherwise specified, all dimensions are in mm.

62
Accessories

Bracket Set - EO BS
It allows the box to be mounted on the wall easily and quickly.

Material : Steel sheet

Surface : Electro galvanized coating
Content : 4 pieces of Bracket pieces
4 pieces of M8x20 hex head bolt
4 pieces of M8 washers
4 pieces of Sealing gaskets

Applicable
Series

Bracket set
Order Code EO BS

63
 XT SERIES
TERMINAL BOXES Stainless-Steel

64
E-Kabin XT Series
Stainless-Steel Terminal Boxes

E-Kabin XT Series terminal boxes are designed as general Type of Mounting : Wall-Mounted
purpose electrical equipment enclosures for indoor and outdoor Modularity : Monoblock
applications. They have monoblock body structure and provide Application : Indoor
IP66 protection degree. Standard production does not include Protection Class : IP 66
painting process. However, custom-made production, varnished Environmental Class : According to EN 60721 - 3 - 3 IE33
or painted in the desired RAL code is possible. Standards : IEC 62208, IEC 60529,
IEC 62262
XT series stainless-steel terminal boxes can be produced with Material : AISI 304 or 316 grade
AISI 304 or 316 grade raw materials as standard. While keeping stainless-steel - standard
standard product design unchanged, size modification, material
thickness modification and cut-outs can be applied if requested.

65
Features

Quarter-turn lock
With quarter-turn locks, the door can be opened and
closed easily.

Clean surface pattern

In the production of stainless-steel enclosures, the weld-
ing process is applied in a way that does not leave any
traces. Thus, clean and smooth surface appearance has
been provided for welded surfaces.

Wide access opening Polyurethane sealing gasket

The design of the box opening prevents installation space Foam-in place gasket applied to the door does not lose
losses and provides ease of access and installation inside its elasticity in time and provides protection against dust
the box. and water.

66
 Practical mounting plate
Design of the mounting plate allows to evaluate the
usable space inside the box with minimum loss.

Possibility of custom-made size

production for high quantity orders
For high quantity orders, non-standard, custom-made size
manufacturing is possible.

* For details, you can get information from your

customer representative.

Possibility of custom-made cut-outs Optional stainless-steel bracket

Custom-made cut-out processing in the door and body is With bracket set enclosure mounting on the wall can
applicable. be done easily and quickly. Thanks to 90° swivel feature
of the bracket, it’s positioning can be chosen either
horizontally or vertically. Bracket set is not included in
standard supply content, it should be ordered separately.

67
Order Codes

Board Rated Board Rated Board Rated

Order Codes (304) Order Codes (304) Order Codes (316)
Height (B) Width (A) Depth (C)

200 200 120 XT 20 20-304 KK XT 20 20-304 PK XT 20 20-316 PK

200 300 120 XT 20 30-304 KK XT 20 30-304 PK XT 20 30-316 PK
200 400 120 XT 20 40-304 KK XT 20 40-304 PK XT 20 40-316 PK
300 300 120 XT 30 30-304 KK XT 30 30-304 PK XT 30 30-316 PK
300 400 120 XT 30 40-304 KK XT 30 40-304 PK XT 30 40-316 PK
400 400 120 XT 40 40-304 KK XT 40 40-304 PK XT 40 40-316 PK

KK - Chrome plated PK - AISI 316 grade

zamak lock stainless-steel lock
Note: The mounting plate is included in the order; bracket set is excluded.

Dimensions

B-40 .5
R4
B+60
Ø13 Ø9
A+60

R6
.5
A-40

22
50
80

20

Ø9

35
Unless otherwise specified, all dimensions are in mm.

68
Accessories

Stainless-Steel Bracket Set - XM BS

It allows the box to be mounted on the wall easily and quickly.

Material : AISI 316 grade stainless-steel

Surface : Electro polishing
Content : 4 pieces of Stainless-steel brackets
4 pieces of M8x20 Stainless-steel hex head bolt
4 pieces of M8 Stainless washer
4 pieces of Sealing gaskets

Applicable
Series

Stainless bracket kit

Order Code XM BS

69
 K SERIES and
CONSOLES Accessories

70
E-Kabin K Series
Monoblock Console

E-Kabin K Series monoblock consoles are designed as general Type of Mounting : Floor-standing
purpose electrical equipment enclosures for indoor applications. Modularity : Monoblock
They have monoblock body structure and provide IP55 Application : Indoor
protection degree. The body and door are made of Protection Class : IP 55
pre-galvanized sheet steel and painted with epoxy polyester Paint : Epoxy - polyester powder paint
powder coating. Colour : Standard RAL 7035 (Grey Colour)
Environmental Class : According to EN 60721 - 3 - 3 IE32
Standards : IEC 61439-1, IEC 62208
IEC 60529, IEC 62262

71
Features

Accessible from back

Thanks to hinged rear cover convenient installation is
provided.

Possibility of assembly at sides

Locations of mounting rails allows maximum use of side
assembly surfaces.

In-door support rails Polyurethane sealing gasket

In door support rails increase the strength of the door and Foam-in place gasket applied to the door does not lose
allow of equipment such as cables and cable trays. its elasticity in time and provides protection against dust
and water.

additional rails

In standard supply content there are two in-door support rails included.

72
 Back-to-back, double mounting plate
possibility
Using of second mounting plate at rear is possible.
The second mounting plate must be ordered separately as
an accessory.

Depth adjustment of mounting plate

Mounting plate can be adjusted along depth thanks to
side mounting rails.

Top cover with gas spring Modular bottom plate arrangement

Gas springs at both sides enable top cover to be opened Bottom plate arrangement complying with high
or closed and kept in open position safely. They are protection degree provides comfort with possibility of
included in standard supply content. sliding piecess. Bottom plates can be equipped with
different brushes which can be supplied as accessories.

Brush should be ordered separately

73
Order Codes

Console Rated
Order Codes
Width (B)

600 EK 0604
800 EK 0804
1000 EK 1004
1200 EK 1204

Note: Mounting plate is included in the standard supply content.

Dimensions
520

B-10

Front cover

16
1025

698

530
B-7

B-110
100

B 400

Top cover
Overlapping Front Cover

B-110
410

530

530

A C

B-10

Overlapping front cover

B= Width
Console Rated Overlapping Overlapping
Width (B) Cover (A) Cover (C)

1000 435 390

1200 535 490

Unless otherwise specified, all dimensions are in mm.

74
Accessories

Mounting Plate - EK MK
The second mounting plate can be selected according to the
console width, if desired.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 1 piece of Mounting plate
1 piece of Fittings pack

Applicable
Series

Mounting plate
Console Width Order Code

600 EK MK 06
800 EK MK 08
1000 EK MK 10
1200 EK MK 12

Mounting Profile - EG MA
It is designed for cable arrangement inside the door. It is selected according
to the door width.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 1 piece of Mounting rail
2 piece of M5x8 self-tapping screw

Applicable
Series

Mounting rail
Console Width Order Code

600 EG MA 0450
800 EG MA 0650
1000 EG MA 0850
1200 EG MA 1050

Unless otherwise specified, all dimensions are in mm.

75
Ventilation Accessories

Fan-Filter Unit - EG FAN

It is designed for cooling when the ambient temperature is lower than the
interior temperature of the enclosure.

• Quick and easy assembly without tools

• Quick and easy filter change from outside
• IP44 protection class

Material : Plastic
Surface : RAL 7035 (Grey Colour)
Content : 1 piece of plastic filtered fan

Applicable
Series

Fan-filter unit
Order Product Voltage Frequency Flow Power Noise Level Fan Flow
Code Dimension V Hz A W dBA m3/h

EG FAN 12 150x150 220/240 50/60 0,14 21 48 82

EG FAN 25 250x250 220/240 50/60 0,22 38 59 300

Roller bearing motors are used in fan.

Fan-filter unit
Order Code B1 x H1 mm B2 x H2 mm T1 mm T2 mm

EG FIL-FAN 12 150x150 123x123 13 67

EG FIL-FAN 25 250x250 223x223 13 115

Filter Unit - EG FIL

It is designed for cooling when the ambient temperature is lower than the
interior temperature of the enclosure.

• Quick and easy assembly without tools

• Quick and easy filter change from outside
• IP44 protection class

Material : Plastic
Surface : RAL 7035 (Grey Colour)
Content : 1 piece of plastic filtered louvre
Applicable
Series

Filter unit
Product Dimension Protection Class Order code

150x150 IP44 EG FIL 12 44

250x250 IP44 EG FIL 25 44

Spare Filter - EG FS
It is designed to be used as a spare in filtered louvres.

• Washable, • G2 class
Spare Filter (IP44)
Product Dimension Order code

125x125 EG FS 12 44
250x250 EG FS 25 44

76
Ventilation Accessories

Thermostat - EG ET
It is used to control the fans that can be operated in case the temperature
inside the enclosure increases.

• 0-60 ºC temperature setting range

• Quick and easy mounting feature, suitable for 35 mm DIN rail

Material : ABS UL94 V0 Flame retardant

Content :
1 piece of Thermostat

Applicable
Series

Thermostat
Order Code EG ET 01

Fan-Filter Unit With Thermostat - EG FAT

It is designed for cooling when the ambient temperature is lower than the
interior temperature of the enclosure.

• 0-60 ºC temperature setting range

• Quick and easy mounting feature, suitable for 35 mm DIN rail

Material : ABS UL94 V0 Flame retardant

Content :
1 piece of Filtered fan with thermostat

Applicable
Series

Note: For fan and filter details, please check product pages with EG FAN and
EG FIL codes.
Fan-filter unit with thermostat
Order Code EG FAT 12
EG FAT 25

77
Other Accessories

M5x8 Self-Tapping Screw - EG CK 5

Special spiral metric thread structure. It has self-tapping feature for sheet
metal surface.

Material : Steel
Surface : Galvanized coating
Content : 100 pieces of M5x8 self-tapping screw

Applicable
Series

M5x8 self-tapping screw

Order Code EG CK 5

Snap-On Gasket - EG GC
It is designed to prevent damages from sharp surfaces.

• Can be used by cutting to desired size

• It has a clawed structure that provides ease of assembly.

15
Material : PVC
15 10
Surface : Black colour
Content : Shown as in the table below.
10
Applicable
Series 6.9

EG GC 01
9.4

5.3
Snap-on gasket 2
Sheet
Content Wire-Reinforced Order Code
Range
2

3 meters 1.0 - 2.0 mm Yes EG GC 01

8

4 meters 0.8 - 1.5 mm No EG GC 02

0.5
EG GC 02

78
Project Document Pocket - EG PC
It has the feature of sticking with self-adhesive double-sided tape suitable for 241

A4 paper size. It can be fixed with bolts if desired.

Material : Plastic
Surface : Black colour
Content : 1 piece of Plastic document pocket

234
Applicable
Series

257 31

Project document pocket

Order Code EG PC

79
 FLOOR-STANDING ENCLOSURES

Floor-Standing Enclosures

Page 83 Page 99 Page 111

ES ED EL

Modularity Modular Modular Modular

Framework Galvanized + Painted Galvanized Galvanized

Carrying Capacity 1500 kg 1500 kg 600 kg

Protection Class Up to IP55 Up to IP55 Up to IP40

Aluminium front bar and

Doors partial door Only full height door Only full height door
application + EAE lock

Height 1800 - 2000 - 2200 1800 - 2000 - 2200 1800 - 2000

Unless otherwise specified, all dimensions are in mm.

80
Outdoor Floor-Standing Stainless Steel Floor Standing
Enclosures Enclosures
Painted with high corrosion resistance paint AISI 304 or AISI 316 Stainless-Steel

Page 123 Page 129 Page 135 Page 141

HS HF XS XH

Modular Monoblock Modular Modular

Galvanized + Painted
Galvanized+Painted Stainless-steel Stainless-steel
(Welded)

500 kg 500 kg 1500 kg 500 kg

Up to IP55 Up to IP66 Up to IP55 Up to IP55

Only full height door Only full height door Only full height door Only full height door

1400 - 1600 - 1800 - 2000 - 1400 - 1600 - 1800 - 2000 -

1800 - 2000 - 2200 1600 - 2000
2200 2200

Unless otherwise specified, all dimensions are in mm.

81
FLOOR-STANDING ENCLOSURES S SERIES

82
E-Kabin S Series
Electrical Enclosures

E-Kabin S Series floor-standing enclosures are designed to be Type of Mounting : Floor-Standing

used in professional high current applications. They are suitable Modularity : Modular
for indoor applications and have modular structure, which Application : Indoor
enables expansion by combining side by side. Depending on Protection Class : IP55, IP41 - depending on front
selection of the door they can have IP55 or IP41 protection door type
class. Electrostatic powder paint are applied on pre-galvanized Framework : Painted, 2 mm Pre-Galvanized sheet
steel sheet on all accessories including main structure that come Paint : Epoxy - polyester powder paint
into contact with the external environment. Bottom plate is Colour : Standard RAL 7035 (Grey Colour)
included in the standard supply content. Environmental Class : According to EN 60721 - 3 - 3 IE33
Standards : IEC 61439-1
Partial door option that may be needed in high current IEC 62208
applications is available in this product series. IEC 60529
IEC 62262

83
Features

Aesthetical outlook
Front bar, made of anodized aluminium, provides
aesthetical outlook.

EAE patented lock type

The swinghandle lock designed and patented by EAE
provides an aesthetic appearance and maximizes comfort
with its functional structure.

It is sufficient to press on the lock plug to release the lock

lever. The key can be removed when unlocked; Can be
used without a key.

Separation options for power

distribution applications

Reliable locking system Horizontal partitioning

Locking system enables the door to be
fixed to the framework at four different
points.

84
 Doors with ventilation louvres
Doors with ventilation louvres that can be used in various
applications can be selected as standard.

Wide range of door type options

• Plain
• Tempered Glass (4 mm)
• Ventilated
IP41 washable filter and filter holder grid

IP 55 IP 41 IP 41 IP 55 IP 41

Modular Design - side-by-side

expandability
Thanks to its modular structure, it is possible to assemble
and expand it side by side for multiple combinations.
• Front and rear door possibility
Robust Framework • Changeable door opening direction
Its strong framework structure allows doors and covers to • Corner module application
be fixed after electro-assembly.

85
Features

Polyurethane sealing gasket

Foam-in place gasket applied to the door does not lose
its elasticity in time and provides protection against dust
and water.

High resistance against corrosion

Framework components are made of 2 mm pregalvanized
sheet steel and painted. Necessary precautions are taken
to secure earthing contiunity while connecting the piecess
together and it is certified.

Modular bottom plate arrangement

Bottom plate arrangement complying with high
protection degree provides comfort with possibility of
sliding piecess. Bottom plates can be equipped with
different brushes which are supplied as accessories.

The brush must be ordered separately.

86
Stackable plinth
Thanks to its modular plinth structure, plints can be
mounted on top of each other to increase the enclosure
height.

Ventilation module accessory

Ventilation module option for high-capacity natural
ventilation

Hinged cover plates

Cover plates are manufactured as hinged and openable.
Thus, it is possible to intervene without removing the
cover plate.

87
Enclosure

Module Set - ES MS
It includes horizontal rails, top cover and plinth set to form the framework
structure.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Ral 9005 (Black) (Plinth)
Content : 4 pieces of horizontal rails (in width)
4 pieces of Horizontal rails (in depth)
1 piece of Top cover
1 piece of Top cover connection pack
1 piece of Plinth set
1 piece of Plinth connection pack
1 set of Bottom gland plate

Applicable
Series

Module set for enclosures with

Module set overlapping door

Enclosure Enclosure Enclosure Enclosure

Rated Rated Order Codes Rated Rated Order Codes
Width Depth Width Depth

400 ES MS 0404 400 ES MS 5504

500 ES MS 0405 500 ES MS 5505
400 600 ES MS 0406 1000 600 ES MS 5506
700 ES MS 0407 700 ES MS 5507
800 ES MS 0408 800 ES MS 5508
400 ES MS 0504 400 ES MS 6604
500 ES MS 0505 500 ES MS 6605
500 600 ES MS 0506 1200 600 ES MS 6606
700 ES MS 0507 700 ES MS 6607
800 ES MS 0508 800 ES MS 6608
400 ES MS 0604
500 ES MS 0605
600 600 ES MS 0606
700 ES MS 0607
800 ES MS 0608
400 ES MS 0704
500 ES MS 0705
700 600 ES MS 0706
700 ES MS 0707
800 ES MS 0708
400 ES MS 0804
500 ES MS 0805
800 600 ES MS 0806
700 ES MS 0807
800 ES MS 0808
Unless otherwise specified, all dimensions are in mm.

88
Uprights Set - ES DP
It is used vertically to form the enclosure framework.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 4 pieces of Uprights
8 pieces of Corner connection plates and fasteners
1 piece of Fittings set

Applicable
Series

Uprights set
Enclosure Rated Height Order Codes

1800 ES DP 18
2000 ES DP 20
2200 ES DP 22

Intermediary Upright Rail - ES DO

• ES DO is designed to be installed between fixed panels at rear side of eclosures
with overlapping door.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of intermediary upright
1 piece of Fittings set

Applicable
Series

Intermediary upright
Enclosure Rated Height Order Codes

1800 ES DO 18
2000 ES DO 20
2200 ES DO 22

Note: This item must be ordered additionally to

form an overlapping door enclosure. They are used
for fixing two rear fixed panels in the middle of the
enclosure rear side.

Unless otherwise specified, all dimensions are in mm.

89
Enclosure

Front Door - ES OK
D0

D1

D3
C0 Material : Galvanized steel sheet
C1 Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Front door
1 piece of Front bar
1 piece of Lock
1 piece of Fittings set

Applicable
Series

Front door
Enclosure Rated Enclosure Rated Width
Order Codes
Height or Depth

400 ES OK 1804 D0
500 ES OK 1805 D0
600 ES OK 1806 D0
1800 700 ES OK 1807 D0
800 ES OK 1808 D0
500+500 ES OK 1855 D0
600+600 ES OK 1866 D0
400 ES OK 2004 D0
500 ES OK 2005 D0
600 ES OK 2006 D0
2000 700 ES OK 2007 D0
800 ES OK 2008 D0
500+500 ES OK 2055 D0
600+600 ES OK 2066 D0
400 ES OK 2204 D0
500 ES OK 2205 D0
600 ES OK 2206 D0
2200 700 ES OK 2207 D0
800 ES OK 2208 D0
500+500 ES OK 2255 D0
600+600 ES OK 2266 D0
Note: Given codes are for D0 door types. If D1, D3, C0 or C1 type door is prefered last two digits of
the code must be changed accordingly.
For C0-C1 type of doors, temperred glass is used.

MA Mounting rails suitable for inner side of doors

Front Door Width Length L Code

50 cm 34,5 cm EG MA 0350
60 cm 44,5 cm EG MA 0450
70 cm 54,5 cm EG MA 0550
80 cm 64,5 cm EG MA 0650

Unless otherwise specified, all dimensions are in mm.

90
Fixed Panel - EG SK
It is used to close the rear and/or sides of the panels. The design of the rear
and side fixed panels are the same.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Fixed panel
1 piece of Fittings set

Applicable
Series

SK Fixed panel
Enclosure Rated Enclosure Rated Width
Order Codes
Height or Depth

400 EG SK 1804
500 EG SK 1805
1800 600 EG SK 1806
700 EG SK 1807
800 EG SK 1808
400 EG SK 2004
500 EG SK 2005
2000 600 EG SK 2006
700 EG SK 2007
800 EG SK 2008
400 EG SK 2204
500 EG SK 2205
2200 600 EG SK 2206
700 EG SK 2207
800 EG SK 2208

Unless otherwise specified, all dimensions are in mm.

91
Enclosure

Partial Door - ES PK
It is designed to use for horizontal partitioning for power distribution applications.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Partial door
1 piece of Fittings set
(lock, hinge, grounding kit)

Applicable
Series

Note: When using partial doors, Front Bars have to be ordered additionally.

Design of partial door is [Link] direction can be changed.

The sum of partial doors’ rated heights used in an enclosure has to be 10 cm less than enclosure rated
height.

Partial door
Partial
Enclosure
Door
Rated
Rated
Width
Height

200 (02) 400 (04)

300 (03) 500 (05)
400 (04) 600 (06)
500 (05) 700 (07)
600 (06) 800 (08)
700 (07) Sample Coding: ES PK 05 06
800 (08)
900 (09)
Partial Door Enclosure
1000 (10)
Rated Height Rated Width
1100 (11)
1200 (12)
1300 (13)
1400 (14)
1500 (15)
1600 (16)
1700 (17) ES PK 0208
1800 (18)
1900 (19) ES PK 0508

ES PK 1408

ES DP 22

Example Application
Unless otherwise specified, all dimensions are in mm.

92
Horizontal Divider Rail - ES YA
It is designed to use for horizontal partitioning for power distribution
applications. It shall be used between two partial doors.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of ES YA Horizontal divider rail
1 piece of Fixing and fittings set

Applicable
Series

Horizontal divider rail

Enclosure Rated Width Order Codes

400 ES YA 04
500 ES YA 05
600 ES YA 06
700 ES YA 07
800 ES YA 08

Front Bar - ES OET

In case of using ES PK, it must be ordered separately as 1 piece per section.

Material : Aluminium
Surface : Anodized coating
Content : 1 piece of Front bar
1 piece of Fittings set

Applicable
Series

Front bar
Enclosure Rated Width Order code

400 ES OET 04
500 ES OET 05
600 ES OET 06
700 ES OET 07
800 ES OET 08

Unless otherwise specified, all dimensions are in mm.

93
Mounting Plate

Full Height Mounting Plate - EG MK

It is designed for general usage.

Material : Galvanized steel sheet

Content : 1 piece of Full height mounting plate
2 pieces of Depth rails
1 piece of Fittings set

Applicable
Series

Full height mounting plate

Enclosure Rated Enclosure Enclosure Steel Sheet
Height Rated Width Rated Depth Thickness

HH WW DD TXX
12* 04 04 T15
14* 05 05 T20
16* 06 06 T30
18 07 07
20 08 08
22 10
12

* Only T20 type is available in these dimensions (HH=12,14,16).

Mounting plate information

Steel Sheet Maximum Surface
TXX
Thickness Carriage Capacity Protection

T15 1,5 mm 300 kg Without Folio

T20 2 mm 600 kg With Folio
T30 3 mm 600 kg Without Folio

Sample Coding: EG MK 20 08 05 T20

Dimension Information Mounting Plate Information

Net
Net
Height Dimension Width
h1

Dimension g1
h1

55 and 66 wide 1800 1645 mm 400 346 mm

mounting plates 2000 1845 mm 500 446 mm
fixing at 9 points
2200 2045 mm 600 546 mm
700 646 mm
800 746 mm
1000 946 mm
g1
1200 1146 mm

Full height mounting plates can be fixed on rear uprights. If full height mounting plate is required
to be adjustable through the depth, EG MKT Sliding rail accessories must be used. Sliding rail
accessories must be ordered separately.

94
 Full Height Mounting Plate Application Examples

EG MKT EG MKT

Adjustable Depth Application Adjustable Depth Application for ≥1000 mm Width

EG MKT page 150

EG MC Full Height EG MC

166

Short Height Application Back to Back Application

EG MKI
3 mm
Inner support rail EG MKI is providing
additional strength for fixing heavy equipment
on full height mounting plates. Full height
mounting plate is fixed after EG MKI is
positioned and fixed, so that it’s rear surface
rests on EG MKI’s front surface.

Inner Support Application

EG MKI page 151
95
Dimensions

17 mm
06

49
49
A 08 06
08

A Detail

1851
1949
2055

1851
1949
2055
A1

A2
A3

100

100
Ø13mm
Net Enclosure Rated Height
Dimensions 1800 2000 2200

A1 1651 mm 1851 mm 2051 mm

A2 1749 mm 1949 mm 2149 mm B2

A3 1855 mm 2055 mm 2255 mm

B Detail

B1

B
08
503
90

Net Enclosure Rated Depth

Dimensions 400 500 600 700 800
703
B1 396 mm 496 mm 596 mm 696 mm 796 mm
B2 301 mm 401 mm 501 mm 601 mm 701 mm
B3 303 mm 403 mm 503 mm 603 mm 703 mm

B3

96
 Example: ES OK 2008 D0
D0 D0 type front door usable space
height dimensions (A4)
Dimension / A4 ES OK 18 ES OK 20 ES OK 22

Net Dimension 1605 mm 1805 mm 2005 mm

D0-1-3 type front door usable area width dimensions (B4)

Dimension / B4 300 400 500 600 700 800

Net Dimension 140 mm 240 mm 340 mm 440 mm 540 mm 640 mm

D1 Example: ES OK 2008 D1

D1 type front door usable space

height dimensions (A5)
Dimension / A5 ES OK 18 ES OK 20 ES OK 22

Net Dimension 1430 mm 1630 mm 1830 mm

Example: ES OK 2008 D3
D3

D3 type front door usable space

height dimensions (A6)
Dimension / A6 ES OK 18 ES OK 20 ES OK 22

Net Dimension 801 mm 1001 mm 1201 mm

Ventilation net opening

Front Door Detail
Height Width OK D1 0,0574 m2
18/20/22 04 0,0095 m2 ES OK 2008 D1
18/20/22 05 0,0141 m2
18/20/22 06 0,0192 m2
18/20/22 07 0,0239 m2
18/20/22 08 0,0287 m2
95
Height Width OK D3
18 04 0,060 m2 105
18 05 0,092 m2
18 06 0,0121 m2
18 07 0,153 m2
18 08 0,185 m2
20 04 0,060 m2 595
20 05 0,092 m2
20 06 0,121 m2
20 07 0,153 m2 Detail A Detail B
20 08 0,185 m2 5
22 04 0,060 m2 30 cm wide
22 05 0,092 m2 D1 Front Door ventilation
22 06 0,121 m2 Note: For forced ventilation calculations, please refer to
22 07 0,153 m2 detail
22 08 0,185 m2 fan cooling calculation technical information page.

97
FLOOR-STANDING ENCLOSURES D SERIES

98
E-Kabin D Series
Electrical enclosures

E-Kabin D Series floor-standing panels are designed to be Type of Mounting : Floor-Standing

used in industrial applications. They are suitable for indoor Modularity : Modular
applications and have modular structure, which enables Application : Indoor, dry environment
expansion by combining side by side. Depending on selection Protection : IP41, IP55
of the door they can have IP55 or IP41 protection class. Framework : Not Painted,
2 mm Pre-Galvanized steel sheet
Doors and covers are made of epoxy polyester powder Paint : Epoxy - polyester powder paint
paint on pre-galvanized sheet and its inner parts are made Colour : Standard RAL 7035 (Grey Colour)
of pre-galvanized steel sheet. Their simple design provides Environmental Class : According to EN 60721 - 3 - 3 IE32
functionality and economic solutions for various installations. Standards : IEC 61439-1,
IEC 62208
IEC 60529,
IEC 62262

99
Features

Stackable plinth
Thanks to its modular plinth structure, plints can be
mounted on top of each other to increase the enclosure
height.

Modular Design - side-by-side expandability

Thanks to its modular structure, it is possible to assemble and
expand it side by side for multiple combinations.
• Front and rear door possibility
• Changeable door opening direction
• Corner module application

Ventilation module accessory

Ventilation module option for high-capacity natural
ventilation

Polyurethane sealing gasket

Foam-in place gasket applied to the door does not
lose its elasticity in time and provides protection
against dust and water.

100
 Robust framework
Its strong framework structure allows doors and covers to
be fixed after electro-assembly.

Doors with ventilation louvres

Doors with ventilation louvres that can be used in various
applications can be selected as standard.

IP 55 IP 41 IP 41 IP 55 IP 41

Wide range of Door Type Options

• Plain
• Tempered Glass (4 mm)
• Ventilated
IP41 washable filter and filter holder grid

Functional full height mounting plate

Full height mounting plate and accessories, which can
be selected in different thicknesses depending on the
need, provides convenience in both expanded enclosure
applications and heavy device mounting.

Reliable locking system

Locking system enables the door to be fixed to the
framework at four different points.

101
Enclosure

Module Set - ED MS
It includes horizontal rails, top cover and plinth set to form the framework.

Material : Pre-Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Ral 9005 (Black)(Plinth)
Content : 4 pieces of Horizontal rails (in width)
4 pieces of Horizontal rails (in depth)
1 piece of Top cover
1 piece of Top cover connection pack
1 piece of Plinth set
1 piece of Plinth fittings pack
1 set of Corner fittings kit (8 pieces of Corner connection
plates and fasteners)
Applicable
Series
Module set for enclosures with
Module set overlapping door

Enclosure Enclosure Enclosure Enclosure

Rated Rated Order Codes Rated Rated Order Codes
Width Depth Width Depth

400 ED MS 0404 (55,41) 400 ED MS 5504 (55,41)

500 ED MS 0405 (55,41) 500 ED MS 5505 (55,41)
400 600 ED MS 0406 (55,41) 1000 600 ED MS 5506 (55,41)
700 ED MS 0407 (55,41) 700 ED MS 5507 (55,41)
800 ED MS 0408 (55,41) 800 ED MS 5508 (55,41)
400 ED MS 0504 (55,41) 400 ED MS 6604 (55,41)
500 ED MS 0505 (55,41) 500 ED MS 6605 (55,41)
500 600 ED MS 0506 (55,41) 1200 600 ED MS 6606 (55,41)
700 ED MS 0507 (55,41) 700 ED MS 6607 (55,41)
800 ED MS 0508 (55,41) 800 ED MS 6608 (55,41)
400 ED MS 0604 (55,41)
500 ED MS 0605 (55,41)
600 600 ED MS 0606 (55,41)
700 ED MS 0607 (55,41)
800 ED MS 0608 (55,41)
400 ED MS 0704 (55,41)
500 ED MS 0705 (55,41)
700 600 ED MS 0706 (55,41)
700 ED MS 0707 (55,41)
800 ED MS 0708 (55,41)
400 ED MS 0804 (55,41)
500 ED MS 0805 (55,41)
800 600 ED MS 0806 (55,41)
700 ED MS 0807 (55,41)
800 ED MS 0808 (55,41)

Note: Supply contents include bottom plate when IP 55 protection class is selected and last two digits of
the order code is “55”. Example: ED MS 0506 55
(For Bottom Plate combinations please check page 182)

Supply contents do not include bottom plate when IP 41 protection class is selected.
Example:ED MS 0506 41

Unless otherwise specified, all dimensions are in mm.

102
Uprights Set - ED DP
It is used vertically to form the enclosure framework.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 4 pieces of Uprights

Applicable
Series

Uprights set
Enclosure Rated Height Order Code

1800 ED DP 18
2000 ED DP 20
2200 ED DP 22

Intermediary Upright Rail - ED DO

ES DO is designed to be installed between fixed panels at rear side of eclosures
with overlapping door.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 1 piece of Vertical intermediary rail
1 piece of Fittings set

Applicable
Series

Intermediary upright rail

Enclosure Rated Height Order Code

1800 ED DO 18
2000 ED DO 20
2200 ED DO 22

Unless otherwise specified, all dimensions are in mm.

103
Enclosure

Front Door - ED OK
D0

D1

D3
C0
Material : Galvanized steel sheet
C1
Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Front door
1 piece of Lock
1 piece of Fittings set

Applicable
Series

Front door
Enclosure Rated Panel Rated Width
Order Codes
Height or Depth

400 ED OK 1804 D0
500 ED OK 1805 D0
600 ED OK 1806 D0
1800 700 ED OK 1807 D0
800 ED OK 1808 D0
500+500 ED OK 1855 D0
600+600 ED OK 1866 D0
400 ED OK 2004 D0
500 ED OK 2005 D0
600 ED OK 2006 D0
2000 700 ED OK 2007 D0
800 ED OK 2008 D0
500+500 ED OK 2055 D0
600+600 ED OK 2066 D0
400 ED OK 2204 D0
500 ED OK 2205 D0
600 ED OK 2206 D0
2200 700 ED OK 2207 D0
800 ED OK 2208 D0
500+500 ED OK 2255 D0
600+600 ED OK 2266 D0

Note: Given codes are for D0 door types. If D1, D3, C0 or C1 type door is prefered last two digits of
the code must be changed accordingly.
For C0-C1 type of doors, temperred glass is used.

MA Mounting rails suitable for inner side of doors

Front Door Width Length L Code

50 cm 34,5 cm EG MA 0350
60 cm 44,5 cm EG MA 0450
70 cm 54,5 cm EG MA 0550
80 cm 64,5 cm EG MA 0650

Unless otherwise specified, all dimensions are in mm.

104
Fixed Panel - EG SK
It is used to close the rear and/or sides of enclosures. The design of the rear
and side fixed panels are the same.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Fixed panel
1 piece of Fittings set

Applicable
Series

Fixed panel
Enclosure Rated Enclosure Nominal Width
Order Code
Height or Depth

400 EG SK 1804
500 EG SK 1805
1800 600 EG SK 1806
700 EG SK 1807
800 EG SK 1808
400 EG SK 2004
500 EG SK 2005
2000 600 EG SK 2006
700 EG SK 2007
800 EG SK 2008
400 EG SK 2204
500 EG SK 2205
2200 600 EG SK 2206
700 EG SK 2207
800 EG SK 2208

Unless otherwise specified, all dimensions are in mm.

105
Mounting Plate

Full Height Mounting Plate - EG MK

It is designed for general usage.

Material : Galvanized steel sheet

Content : 1 piece of Full height mounting plate
2 pieces of Depth rails
1 piece of Fittings set

Applicable
Series

Full height mounting plate

Enclosure Rated Enclosure Enclosure Steel Sheet
Height Rated Width Rated Depth Thickness

HH WW DD TXX
12* 04 04 T15
14* 05 05 T20
16* 06 06 T30
18 07 07
20 08 08
22 10
12

* Only T20 type is available in these dimensions (HH=12,14,16).

Mounting plate information

Steel Sheet Maximum Surface
TXX
Thickness Carriage Capacity Protection

T15 1,5 mm 300 kg Without Folio

T20 2 mm 600 kg With Folio
T30 3 mm 600 kg Without Folio

Sample Coding: EG MK 20 08 05 T20

Dimension Information Mounting Plate Information

Net
Net
Height Dimension Width
h1

Dimension g1
h1

55 and 66 wide 1800 1645 mm 400 346 mm

mounting plates 2000 1845 mm 500 446 mm
fixing at 9 points
2200 2045 mm 600 546 mm
700 646 mm
800 746 mm
1000 946 mm
g1
1200 1146 mm

Full height mounting plates can be fixed on rear uprights. If full height mounting plate is required
to be adjustable through the depth, EG MKT Sliding rail accessories must be used. Sliding rail
accessories must be ordered separately.

106
 Full Height Mounting Plate Application Examples

EG MKT EG MKT

Adjustable Depth Application Adjustable Depth Application for ≥1000 mm Width

EG MKT page 150

EG MC Full Height EG MC

166

Short Height Application Back to Back Application

EG MKI
3 mm
Inner support rail EG MKI is providing
additional strength for fixing heavy equipment
on full height mounting plates. Full height
mounting plate is fixed after EG MKI is
positioned and fixed, so that it’s rear surface
rests on EG MKI’s front surface.

Inner Support Application

EG MKI page 151
107
Dimensions

17 mm
06

49
49
A
08 800 600

A Detail

1851
1949
2055

1851
1949
2055
A1
A2
A3

100

100
Ø13mm
Net Enclosure Rated Height
Dimensions 1800 2000 2200

A1 1651 mm 1851 mm 2051 mm

A2 1749 mm 1949 mm 2149 mm B2

A3 1855 mm 2055 mm 2255 mm

B Detail

B1

B
08
503
90

Net Enclosure Rated Depth

Dimensions 400 500 600 700 800
703
B1 396 mm 496 mm 596 mm 696 mm 796 mm
B2 301 mm 401 mm 501 mm 601 mm 701 mm
B3 303 mm 403 mm 503 mm 603 mm 703 mm

B3

108
D0
D0 type front door usable space Example: ED OK 2008 D0
height dimensions (A4)
Dimension / A4 ED OK 18 ED OK 20 ED OK 22

Net Dimension 1605 mm 1805 mm 2005 mm

D0-1-3 type front door usable area width dimensions (B4)

Dimension / B4 300 400 500 600 700 800

Net Dimension 140 mm 240 mm 340 mm 440 mm 540 mm 640 mm

D1

Example: ED OK 2008 D1

D1 type front door usable space

height dimensions (A5)
Dimension / A5 ED OK 18 ED OK 20 ED OK 22

Net Dimension 1430 mm 1630 mm 1830 mm

D3

Example: ED OK 2008 D3

D3 type front door usable space

height dimensions (A6)
Dimension / A6 ED OK 18 ED OK 20 ED OK 22

Net Dimension 801 mm 1001 mm 1201 mm

Ventilation net opening Front Door Detail

0,0574 m2
Height Width OK D1 ES OK 2008 D1
18/20/22 04 0,0095 m2
18/20/22 05 0,0141 m2
18/20/22 06 0,0192 m2
18/20/22 07 0,0239 m2
18/20/22 08 0,0287 m2 95
Height Width OK D3 105
18 04 0,060 m2
18 05 0,092 m2
18 06 0,0121 m2
18 07 0,153 m2
18 08 0,185 m2 595
20 04 0,060 m2
20 05 0,092 m2
20 06 0,121 m2 Detail A Detail B
20 07 0,153 m2 5
20 08 0,185 m2 30cm wide D1 Front Door
22 04 0,060 m2 ventilation detail
22 05 0,092 m2 Note: For forced ventilation calculations, please refer to
22 06 0,121 m2 fan cooling calculation technical information page.
22 07 0,153 m2
22 08 0,185 m2

109
FLOOR-STANDING ENCLOSURES L SERIES

110
E-Kabin L Series
Electrical Enclosures

E-Kabin L Series floor-standing panels are designed to be Type of Mounting : Floor-Standing

used in industrial applications. They are suitable for indoor Modularity : Modular
applications and have modular structure, which enables Application : Indoor, dry environment
expansion by combining side by side. Their protection class is Protection Class : IP40
IP 40. Doors and covers are made of epoxy polyester powder Framework : Pre-galvanized steel sheet
paint on pre-galvanized sheet and its inner parts are made Paint : Epoxy - polyester powder paint
of pre-galvanized steel sheet. Their simple design provides Colour : Standard RAL 7035 (Grey Colour)
functional solutions for various applications. Plinth colour is Environmental Class : According to EN 60721 - 3 - 3 IE32
RAL 7035. Standards : IEC 61439-1,
IEC 62208
IEC 60529,
IEC 62262

111
Features

Reliable locking system

Locking system enables the door to be fixed to the
framework at four different points.

Easy electrical assembly with

mutual mounting accessories
Thanks to robust framework and internal mounting
accessories; door, back and side panel fixing is carried
out after electrical assembly. Internal mounting
accessories are designed to be used in all E-Kabin
series.

Door with ventilation modules

Ventilation module option for high-capacity natural
ventilation.

Hangable side cover design to

framework
The feature of back and side covers can be
hung on the framework, which provides
easy assembly

112
Polyurethane sealing gasket
Foam-in-place gasket applied to door does not
loose its elasticity in time and provides protection
against dust and water.

IP40 Modular bottom plate

arrangement
Bottom plate arrangement complying with IP40
protection degree provides comfort with possibility
of sliding piecess. Bottom plates can be equipped
with different brushes which are supplied as
accessories.

Front cover plates with hinges

Cover Plates are manufactured as hinged and
openable. So, it provides easy job to intervene
without removing the cover plate.

113
Enclosure

Module Set - EL MS
Supply contents include horizontal rails, top cover and bottom plate.

Material : Galvanized steel sheet

Surface : RAL 7035 (Grey Colour)
Content : 4 pieces of Horizontal rails (for width)
4 pieces of Horizontal rails (for depth)
1 piece of Top cover
1 piece of Top cover fittings pack
1 piece of Plinth set
1 piece of Plinth set fittings pack
1 set of Corner connection kit (8 pieces of Corner
connection plates and fasteners)
1 piece of Bottom cover
2 pieces of Bottom gland plate
Available
Series
Module sets for Enclosures with
Module set overlapping door

Enclosure Enclosure Enclosure Enclosure

Rated Rated Order Codes Rated Rated Order Codes
Width Depth Width Depth

400 EL MS 0404 400 EL MS 5504

500 EL MS 0405 500 EL MS 5505
400 600 EL MS 0406 1000 600 EL MS 5506
700 EL MS 0407 700 EL MS 5507
800 EL MS 0408 800 EL MS 5508
400 EL MS 0504 400 EL MS 6604
500 EL MS 0505 500 EL MS 6605
500 600 EL MS 0506 1200 600 EL MS 6606
700 EL MS 0507 700 EL MS 6607
800 EL MS 0508 800 EL MS 6608
400 EL MS 0604 Gland plate
500 EL MS 0605 Gland Plate
Enclosure Enclosure
Rated Rated Content
600 600 EL MS 0606
Width Depth
RP 40 RP 60
700 EL MS 0607
400-500-600
800 EL MS 0608 300 - -
700-800
400 EL MS 0704
400-500 1 -
500 EL MS 0705 400-500
600-700-800 2 -
700 600 EL MS 0706
400-500 - 1
700 EL MS 0707 600-700
600-700-800 - 2
800 EL MS 0708
400-500 2 -
400 EL MS 0804 800
500 EL MS 0805 600-700-800 4 -

800 600 EL MS 0806 400-500 2 -

1000
700 EL MS 0807 600-700-800 4 -

800 EL MS 0808 400-500 - 2

1200
600-700-800 - 4
96
96

≥600
≤500
96

Unless otherwise specified, all dimensions are in mm.

114
Uprights Set - EL DP
EL DP is used vertical wise to assemble the enclosure framework.

Material : Galvanized steel sheet

Surface : Galvanized, Not Painted
Content : 4 pieces of uprights

Applicable
Series

Uprights set
Enclosure Rated Height Order Code

1800 EL DP 18
2000 EL DP 20

Unless otherwise specified, all dimensions are in mm.

115
Enclosure

Front Door and Rear Fixed Panel Set - EL OA

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Front door
1 piece of Rear fixed panel
(There are 2 pieces of Rear fixed panels for overlapping doors)
1 piece of Lock
1 piece of Front door connection set
1 piece of Rear fixed panel connection set

Applicable
Series

Front door and rear fixed panel set

Enclosure Rated Enclosure Rated
Order Code
Height Depth&Width

400 EL OA 1804
500 EL OA 1805
600 EL OA 1806
1800 700 EL OA 1807
800 EL OA 1808
500+500 EL OA 1855
600+600 EL OA 1866
400 EL OA 2004
500 EL OA 2005
600 EL OA 2006
2000 700 EL OA 2007
800 EL OA 2008
500+500 EL OA 2055
600+600 EL OA 2066

Note: There are 2 pieces of rear Fixed Panels and 1 piece of EL DO Vertical
Intermediary Rail in the standard order content for overlapping doors.

MA Mounting rails suitable for inner side of doors

Front Door Width Length L Code

50 cm 34,5 cm EG MA 0350
60 cm 44,5 cm EG MA 0450
70 cm 54,5 cm EG MA 0550
80 cm 64,5 cm EG MA 0650

Unless otherwise specified, all dimensions are in mm.

116
Side Fixed Panel Set - EL YS
It is used to close sides of enclosures. The design of the rear and side fixed
panels are the same.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 2 pieces of Fixed panels
2 pieces of Fittings set

Applicable
Series

YS Side fixed panel set

Enclosure Rated Enclosure Rated
Order Code
Height Depth&Width

400 EL YS 1804
500 EL YS 1805
1800 600 EL YS 1806
700 EL YS 1807
800 EL YS 1808
400 EL YS 2004
500 EL YS 2005
2000 600 EL YS 2006
700 EL YS 2007
800 EL YS 2008

Unless otherwise specified, all dimensions are in mm.

117
Mounting Plate

Full Height Mounting Plate - EG MK

It is designed for general usage.

Material : Galvanized steel sheet

Content : 1 piece of Full height mounting plate
2 pieces of Depth rails
1 piece of Fittings set

Applicable
Series

Full height mounting plate

Enclosure Rated Enclosure Enclosure Steel Sheet
Height Rated Width Rated Depth Thickness

HH WW DD TXX
12* 04 04 T15
14* 05 05 T20
16* 06 06 T30
18 07 07
20 08 08
22 10
12

* Only T20 type is available in these dimensions (HH=12,14,16).

Mounting plate information

Steel Sheet Maximum Surface
TXX
Thickness Carriage Capacity Protection

T15 1,5 mm 300 kg Without Folio

T20 2 mm 600 kg With Folio
T30 3 mm 600 kg Without Folio

Sample Coding: EG MK 20 08 05 T20

Dimension Information Mounting Plate Information

Net
Net
Height Dimension Width
h1

Dimension g1
h1

55 and 66 wide 1800 1645 mm 400 346 mm

mounting plates 2000 1845 mm 500 446 mm
fixing at 9 points
2200 2045 mm 600 546 mm
700 646 mm
800 746 mm
1000 946 mm
g1
1200 1146 mm

Full height mounting plates can be fixed on rear uprights. If full height mounting plate is required
to be adjustable through the depth, EG MKT Sliding rail accessories must be used. Sliding rail
accessories must be ordered separately.

118
 Full Height Mounting Plate Application Examples

EG MKT EG MKT

Adjustable Depth Application Adjustable Depth Application for ≥1000 mm Width

EG MKT page 150

EG MC Full Height EG MC

166

Short Height Application Back to Back Application

EG MKI
3 mm
Inner support rail EG MKI is providing
additional strength for fixing heavy equipment
on full height mounting plates. Full height
mounting plate is fixed after EG MKI is
positioned and fixed, so that it’s rear surface
rests on EG MKI’s front surface.

Inner Support Application

EG MKI page 151
119
Dimensions

17 mm
06

49
49
A
08 800 600

Detail A

1851
1949
2055

1851
1949
2055
A1
A2
A3

100

100
Ø13mm
Net Enclosure Rated Height
Dimensions 2000

A1 1851 mm
A2 1949 mm B2

A3 2055 mm

Detail B

B
08

B1
503
90

Net Enclosure Rated Width or Depth

Dimensions 400 500 600 700 800
703
B1 396 mm 496 mm 596 mm 696 mm 796 mm
B2 301 mm 401 mm 501 mm 601 mm 701 mm
B3 303 mm 403 mm 503 mm 603 mm 703 mm

B3

Front door usage area height Example: 800 mm width

dimensions (A4)
Dimension / A4 EL front door

Net Dimension 1805 mm

Front door usage area width dimensions (B4)

Dimension / B4 300 400 500 600 700 800

Net Dimension 140 mm 240 mm 340 mm 440 mm 540 mm 640 mm

120
121
 HS SERIES
FLOOR-STANDING ENCLOSURES Outdoor- Modular

122
E-Kabin HS Series
Outdoor Electrical Enclosures

E-Kabin HS Series floor-standing electrical enclosures are Type of Mounting : Floor-Standing

designed as general purpose electrical equipment enclosures Modularity : Modular
for outdoor applications. Depending on the door selection they Place of use : Outdoor
can provide IP 55 or IP 41 protection degree. Their structure is Protection Class : IP55, IP41 depending on front door type
modular, which enables expansion by combining side by side. Paint : High corrosion resistant paint
All parts that come into contact with external enviroment are according to ISO 12944-2
made of pre-galvanized sheet steel and coated first with primer Colour : Painted, Standard RAL 7035
paint then with electrostatic powder paint. (Grey Colour)
Environmental Class : According to EN 60721 - 3 - 3 IE37
Standards : IEC 61439-1
IEC 62208
IEC 60529
IEC 62262

123
Features

Modular design - side-by-side

expandability
Thanks to modular design of framework and canopy,
expanding side by side is possible to form large
combinations.

Moreover;
• Rear and front door usage
• It is possible to change the door opening direction.

Common interior accessories

Most of E-Kabin interior accessories such as mounting
rails, mounting plates, cover plates etc. are designed to
be suitable for use in all E-Kabin enclosures.

Under canopy fan unit

”Under Canopy Fan Unit” is accesable from inside the
enclosure for easy service and maintenance.

124
Lifting kit
The lifting kit is placed on the top of the canopy as
standard. By the lifting kit, it is available to lift up and
carry the fully loaded enclosure safely and easily.

Stackable plinth
Thanks to its modular plinth structure, plints can be
mounted on top of each other to increase the enclosure
height.

Stainless-steel lock accessory

Standard swinghandle lock made of metal with high
chemical resistance can be replaced with optionally
selectable AISI 316 grade stainless-steel lock if required.

125
Order Codes

HS outdoor free standing enclosures are manufactured in the dimensions given below.
Please consult your Customer Represantative for order information.

Enclosure Rated Enclosure Rated Enclosure Rated

Height (A) Width (B) Depth (C)

1800 600 600

2000 700 700
2200 800 800
1000
1200

Dimensions
C + 115

Enclosure Rated A Dimension Body B Dimension External 32

Height (A) Height Height (A+180mm)

18-1800 1750 1930

20-2000 1950 2130
22-2200 2150 2330

B
A
Enclosure Rated C Dimensiom Body D Dimension Enclosure Width
Width Width Side Panels Included (C+50 mm)
C
04-400 mm 400 450
D
05-500 mm 500 550
06-600 mm 600 650
08-800 mm 800 850 F + 115

10-1000 mm 1000 1050

30 30

12-1200 mm 1200 1250

Enclosure Rated F Dimension Body G Dimension Enclosure Depth

Depth Depth Front and Rear Panels Included

04-400 mm 400 455

05-500 mm 500 555
06-600 mm 600 655
100

F
08-800 mm 800 855 G

Unless otherwise specified, all dimensions are in mm.

126
 C + 57 H + 57 K + 115

32

Ø
28

55
B
A

100
C F G K

D H L

Side Enclosure Middle Enclosure

G + 57 K + 115 K + 115

30 30
32

B
B
A

A
G K F K
H L

Enclosure Rated A Dimension Body B Dimension External Enclosure Rated K Dimension Body L Dimension Enclosure Depth Front and
Height Height Height (A+180 mm) Depth Depth Rear Panels Included (K+55 mm)

1800 600 600 04-400 mm 400 455

2000 700 700 05-500 mm 500 555
2200 800 800 06-600 mm 600 655
08-800 mm 800 855

Enclosure Rated C Dimension Body D Dimension Enclosure Width F Dimension G Dimension H Dimension Enclosure Width
Width Width Side Panels are included(C+25 mm) Body Width Body Width Side Panels Included(W+25 mm)

04-400 mm 400 425 400 400 425

05-500 mm 500 525 500 500 525
06-600 mm 600 625 600 600 625
08-800 mm 800 825 800 800 825
10-1000 mm 1000 1025 1000 1000 1025
12-1200 mm 1200 1225 1200 1200 1225

Unless otherwise specified, all dimensions are in mm.

127
 HF SERIES
FLOOR-STANDING ENCLOSURES Outdoor- Monoblock

128
E-Kabin HF Series
Outdor Electrical Enclosures

E-Kabin HF Series floor-standing electrical enclosures are Type of Mounting : Floor-Standing

designed as general purpose electrical equipment enclosures Modularity : Monoblock
for outdoor applications. They have monoblock body Place of use : Outdoor
structure and provide IP66 protection degree. All parts that Protection Class : IP 66
come into contact with external enviroment are made of pre- Paint : According to ISO 12944-2 high
galvanized sheet steel and coated first with primer paint then corrosion resistant paint
with electrostatic powder paint. Colour : Standard RAL 7035 (Grey Colour)
Environment class : IE37 according to EN 60721 - 3 - 3
Standards : IEC 61439-1
IEC 62208
IEC 60529
IEC 62262

129
Features

Polyurethane sealing gasket

Foam-in-place gasket behind the door does not lose its
elasticity in time and provides protection against dust and
water

Common interior accessories

Most of E-Kabin interior accessories such as mounting
rails, mounting plates, cover plates etc. are designed to be
suitable for use in all E-Kabin enclosures.

Stainless-steel lock accessory

Standard swinghandle lock made of metal with high chemical
resistance can be replaced with optionally selectable AISI 316
grade stainless-steel lock if required.

130
 Lifting kit
The lifting kit is placed on the top of the canopy as standard.
By the lifting kit, it is available to lift up and carry the fully
loaded enclosure safely and easily.

Stackable plinth
Thanks to its modular plinth structure, plints can be
mounted on top of each other to increase the enclosure
height.

Under canopy fan unit

”Under Canopy Fan Unit” is accesable from inside the enclosure
for easy service and maintenance.

131
Order Codes

Enclosure Rated Enclosure Rated Enclosure Rated

Order Codes
Height Width (mm) Depth (C)

600 05 HF 16 06 05
16
800 05 HF 16 08 05
600 05 HF 20 06 05
20
800 05 HF 20 08 05

Note: Mounting plate is not included in standard supply content,

must be ordered seperately.

Note: Please consult your Customer Represantative for interior

mounting accessories that can be selected for specific
applications.

Dimensions
A

Width Depth

Enclosure Rated A Dimension B Dimension Outer Height

Height Width Depth
Height Body Height (Height with lifting kit)

20 05-500 mm 05 - 500 mm 20 1950 2185

16 07-700 mm - 16 1550 1785

Unless otherwise specified, all dimensions are in mm.

132
Mounting Plates and Accessories

Full Height Mounting Plate - HF MK

It is designed for general use.

Material : 2 mm Galvanized steel sheet

Content : 1 piece of Full height mounting plate
1 piece of Lower support rail
2 pieces of Right-left upper fixings
1 piece of Fittings set

Applicable
Series

Full height mounting plate

Enclosure Rated Enclosure Rated
Order Code
Height Width

600 HF MK 1606
1600
800 HF MK 1608
600 HF MK 2006
2000
800 HF MK 2008

133
 XS SERIES
FLOOR-STANDING ENCLOSURES Stainless-Steel - Modular

134
E-Kabin XS Series
Stainless-Steel Electrical Enclosures

E-Kabin XS Series stainless-steel, floor standing enclosures are Type of Mounting : Floor-Standing
designed as general purpose electrical equipment enclosures for Modularity : Modular
industrial applications. They are suitable for indoor applications Application : Indoor
and have modular structure, which enables expansion by Protection Class : IP55
combining side by side. They provide IP 55 protection degree. Environmental Class : According to EN 60721 - 3 - 3 IE33
Standard production does not include painting process. Standards : IEC 61439-1
However, custom-made production, varnished or painted in the IEC 62208
desired RAL code is possible. IEC 60529
IEC 62262
XS Series stainless-steel enclosures can be produced with AISI Material : AISI 304 grade stainless-steel -
304 or 316 grade raw material. In standard swinghandle lock standard
made of metal with high chemical resistance is used in XS AISI 316 grade stainless-steel -
Series. Optionally, locking system made of 304 or 316 grade optional
stainless-steel can also be selected.

All E-Kabin interior accessories are designed to be suitable for

use in stainless-steel enclosures as well.

While keeping standard product design unchanged, size

modification, material thickness modification and cut-outs can
be applied if requested.

135
Features

Stackable plinth
Thanks to its modular plinth structure, plints can be
mounted on top of each other to increase the enclosure
height.

Clean surface pattern

In production of stainless-steel enclosures, stud welding
process is applied in a way that it does not leave any
traces visible from outside the door. Thus, clean and
smooth surface appearance has been provided for
welded surfaces.

Common interior accessories

Most of E-Kabin interior accessories such as mounting
rails, mounting plates, cover plates etc. are designed to
be suitable for use in stainless-steel enclosures. Possibility of custom-made cut-outs
Custom-made cut-out processing on the door and body
is applicable.

136
 Polyurethane sealing gasket
Foam-in-place gasket behind the door does not lose its
elasticity in time and provides protection against dust and
water

Stainless-steel lock accessory

Standard swinghandle lock made of metal with high
chemical resistance can be replaced with optionally
selectable AISI 316 grade stainless-steel lock if required.

Possibility of custom size production

Non-standard, custom size manufacturing is possible.
Robust hidden hinge
* Please consult your Customer Represantative for more
As standard 3 pcs. door hinge which is 3mm thick and
information.
AISI 316 grade stainless-steel, is designed in such a way
that it is not visible from outside of the door. Thanks to
this hinge the door can be opened up to 130°.

a'= a+n.200 mm
b'= b+n.100 mm
c’= c+n.100 mm

137
Order Codes

XS Stainless-Steel floor standing enclosures are manufactured in the dimensions given below.
Please consult your Customer Represantative for order information.

Enclosure Rated Enclosure Rated Enclosure Rated

Height Width Depth

1400 400 400

1600 500 500
1800 600 600
2000 700 700
2200 800 800

138
Dimensions

49
49

1851

1949

2055

1851

1949

2055
H1

H2

H3

100

100
08

Net Enclosure rated height

B2 Dimensions 1800 2000 2200

H1 1749 mm 1949 mm 2149 mm

503
06

H2 1651 mm 1851 mm 2051 mm

H3 1855 mm 2055 mm 2255 mm
B
703 B1

Ø13 mm Net Enclosure Rated Width or Depth

Dimensions 400 500 600 700 800

B1 396 mm 496 mm 596 mm 696 mm 796 mm

B2 301 mm 401 mm 501 mm 601 mm 701 mm
B3 303 mm 403 mm 503 mm 603 mm 703 mm

B3

Front Door Usage Area Height Dimensions (HK)

Dimensions / HK ES OK 18 ES OK 20 ES OK 22

Net Dimensions 1610 mm 1810 mm 2010 mm

75 80

Front Door Usable Area Width Dimensions (UK)

Dimensions / BK 300 400 500 600 700 800

Net Dimensions 145 mm 245 mm 345 mm 445 mm 545 mm 645 mm

139
 XH SERIES
FLOOR-STANDING ENCLOSURES Stainless-Steel - Monoblock

140
E-Kabin XH Series
Stainless-Steel Electrical Enclosures

E-Kabin XH Series stainless-steel, floor standing enclosures are Type of Mounting : Floor-Standing
designed as general purpose electrical equipment enclosures Modularity : Modular
for outdoor applications. Their structure is modular, which Application : Outdoor
enables expansion by combining side by side. They provide IP Protection Class : IP55
55 protection degree. Standard production does not include Environmental Class : According to EN 60721 - 3 - 3 IE37
painting process. However, custom-made production, varnished Standards : IEC 61439-1
or painted in the desired RAL code is possible. IEC 62208
IEC 60529
XS Series stainless-steel enclosures can be produced with AISI IEC 62262
304 or 316 grade raw material. Standard swinghandle lock is Material : AISI 304 grade stainless-steel -
made of 316 grade stainless-steel. standard
AISI 316 grade stainless-steel -
All E-Kabin interior accessories are designed to be suitable for optional
use in stainless-steel enclosures as well. Lock set : Stainless-steel - standard

While keeping standard product design unchanged, size

modification, material thickness modification and cut-outs can
be applied if requested.

141
Features

Clean surface pattern

In production of stainless-steel enclosures, stud welding
process is applied in a way that it does not leave any
traces visible from outside the door. Thus, clean and
smooth surface appearance has been provided for
welded surfaces.

Common interior accessories

Most of E-Kabin interior accessories such as mounting
rails, mounting plates, cover plates etc. are designed to
be suitable for use in stainless-steel enclosures.

Under canopy fan unit Possibility of custom size production

“Under Canopy Fan Unit” is accesable from inside the Non-standard, custom size manufacturing is possible.
enclosure for easy service and maintenance. * Please consult your Customer Represantative for more
information.

a'= a+n.200 mm
b'= b+n.100 mm
c’= c+n.100 mm

142
 Modular design - side-by-side
expandability
Thanks to its modular structure, it is possible to assemble
and expand it side by side for multiple combinations.

Moreover;
• Rear and front door use
• It is possible to change the door opening direction.

Optional lifting kit

Optional lifting kit enable fully loaded enclosure to be
lifted up and carried for installation purposes.

Polyurethane sealing gasket Stainless-steel lock

Foam-in-place gasket behind the door does not lose its Lock system made of AISI 316 grade stainless-steel is
elasticity in time and provides protection against dust and included in the standard order content.
water.

143
Order Codes

XH Stainless-Steel floor standing enclosures are manufactured in the dimensions given below.
Please consult your Customer Represantative for order information.

Enclosure Rated Enclosure Rated Enclosure Rated

Height Width Depth

1400 400 400

1600 500 500
1800 600 600
2000 700 700
2200 800 800

Dimensions

Enclosure Rated A Dimension B Dimension Outer Height

Height Body Height (A+180mm)

14-1400 mm 1350 1530 C + 115

16-1600 mm 1550 1730

32
18-1800 mm 1750 1930
20-2000 mm 1950 2130
22-2200 mm 2150 2330

B
A

Enclosure Rated C Dimension Body D Dimension Enclosure Width

Width Width Including Side Panel (C+50 mm)

04-400 mm 400 450

C
05-500 mm 500 550 D

06-600 mm 600 650

08-800 mm 800 850
F + 115
10-1000 mm 1000 1050
12-1200 mm 1200 1250 30 30

Enclosure Rated F Dimension Body G Dimension Enclosure Width Including

Depth Depth Front Door-Rear Panel (C+50 mm)

04-400 mm 400 455

05-500 mm 500 555
06-600 mm 600 655
100

08-800 mm 800 855

F

Unless otherwise specified, all dimensions are in mm.

144
Dimensions

C + 57 H + 57 K + 115

32

Ø
28

55
B
A

100
C F G K

D H L

Side Enclosure Front Enclosure

G + 57 K + 115 K + 115

30 30
32

B
B
A

A
G K F K
H L

Enclosure Rated A Dimension Body B Dimension Outer Height Enclosure Rated K Dimension Body L Dimension Enclosure Depth
Height Height (A+180mm) Depth Depth Front - Back Cover Included (K+55 mm)

14-1400 1350 1530 04-400 mm 400 455

16-1600 1550 1730 05-500 mm 500 555
18-1800 1750 1930 06-600 mm 600 655
20-2000 1950 2130 08-800 mm 800 855
22-2200 2150 2330

Enclosure Rated C Dimension Body D Dimension Enclosure Width F Dimension Body G Dimension H Dimension Enclosure Width
Width Width Including Side Cover (C+25 mm) Width Body Widthi Including Side Cover (W+25 mm)

04-400 mm 400 425 400 400 425

05-500 mm 500 525 500 500 525
06-600 mm 600 625 600 600 625
08-800 mm 800 825 800 800 825
10-1000 mm 1000 1025 1000 1000 1025
12-1200 mm 1200 1225 1200 1200 1225

Unless otherwise specified, all dimensions are in mm.

145
 Floor-Standing Enclosure
FLOOR-STANDING ENCLOSURES Accessories

146
Full Height Mounting Plates and Full Height Mounting Plates - EG MK 148
Accessories Full Height Mounting Plate Upper-Lower Support Rail - EG MKT 150
Full Height Mounting Plate Inner Support Rail - EG MKI 151
Full Height Mounting Plate Infill Rail - EG MKA 151
Internal Mounting Accessories Mounting Rail - EG MA 154
Mounting Rail - EG MB 155
Mounting Rail - EG MC 156
Mounting Rail - EG ME 157
Mounting Rail - EG MG 157
Mounting Plate - EG MP 158
Special Mounting Rail - EG SP 159
Power Factor Compensation Mounting Plate - EG KSS 160
Power Factor Compensation Mounting Plate (Deep Type) - EG KSD 161
Aluminium Rail Set - EG RS 162
MCCB Adjustable Mounting Plates - EG SY 163
Special Fixing Set - EG DST 164
19 inch Swing Frame - EG MF 165
Adapter Rail - HF AO 166
Front Cover Plates and Accessories Front Cover Frame Set - HS OS 167
Front Cover Frame Set - HF OS 167
Full Height Cover Plate - EG OB 168
Full Height Cover Plate - HS OB 169
Cover Plate With Hinges - EG OM 170
Front Cover Frame Set - EG OS 171
Fixed Cover Plate - EG SO 172
Cover Plate Standard Latch Set - EG OMP 173
Cover Plate Standard Hinge Kit - EG OMT 173
Cover Plate Seal Kit - EG OMM 174
Cover Plate Screw Connection Kit - EG OMV 174
Ventilation Accessories Ventilation Module - EG HM 175
Roof Top Fan - EG FM 176
Under-Canopy Ventilation Set - HS FM 177
Under-Canopy Ventilation Set - HF FM 177
Fan-Filter Unit - EG FAN 178
Filter Unit - EG FIL 178
Spare Filter - EG FS 178
Thermostat - EG ET 179
Fan-Filter Unit With Thermostat - EG FAT 179
Base and Cable Entry Accessories Plinth Set - EG BZ 180
Plinth Set - XS BZ 181
Bottom Gland Plate Set - ES BO 182
Cable Attachment Rail - EG KTP 183
Brush for Bottom Cable Entry - EG OF 183
Bottom Plate Gasket Set - EG BOC 184
Gland Plate With Brush - EG FR 184
Locks XS KT 01 Stainless-Steel Swinghandle Lock - XS KT 185
XS KT 02 Stainless-Steel Padlockable Swinghandle Lock - XS KT 185
ES KT 01 Swinghandle Lock With Button - ES KT 186
EG KT 01 Swinghandle Lock - EG KT 186
Enclosure Baying Accessories Enclosure Baying Kit - EG PB 00 187
Enclosure Baying Kit - EG PB 03 187
Document Pockets Project Document Pocket - EG PC 188
Project Document Pocket - EG SC 188
Door Holders Door Holder Set - HF KS 189
Door Holder Set - EG DT 189
Lifting Accessories Lifting Kit - EG AT 01 190
Dual Lifting Kit - EG AT 02 190
Ventilation Module Lifting Kit - EG HMT 01 191
Ventilation Module Dual Lifting Kit - EG HMT 02 191
Other Accessories Spring Zamak Nut - EG CY 192
Zamak Nut - EG CZ 192
M5x8 mm Self-Tapping Screw - EG CK 5 193
Snap-On Gasket - EG GC 193
Interior Lighting Fixture - EG KL 194
EG MB Fixing Set - EG MBT 194
Busbar Riser Module - EG BY 195
Wall Fixing Set - ES DS 196
Laptop Table - EG DB 196
Corner Module - EG KM 197
Screen Module - EG MR 197

147
Mounting Plate

Full Height Mounting Plate - EG MK

It is designed for general usage.

Material : Galvanized steel sheet

Content : 1 piece of Full height mounting plate
2 pieces of Depth rails
1 piece of Fittings set

Applicable
Series

Full height mounting plate

Enclosure Rated Enclosure Enclosure Steel Sheet
Height Rated Width Rated Depth Thickness

HH WW DD TXX
12* 04 04 T15
14* 05 05 T20
16* 06 06 T30
18 07 07
20 08 08
22 10
12

* Only T20 type is available in these dimensions (HH=12,14,16).

Mounting plate information

Steel Sheet Maximum Surface
TXX
Thickness Carriage Capacity Protection

T15 1,5 mm 300 kg Without Folio

T20 2 mm 600 kg With Folio
T30 3 mm 600 kg Without Folio

Sample Coding: EG MK 20 08 05 T20

Dimension Information Mounting Plate Information

Net
Net
Height Dimension Width
h1

Dimension g1
h1

55 and 66 wide 1800 1645 mm 400 346 mm

mounting plates 2000 1845 mm 500 446 mm
fixing at 9 points
2200 2045 mm 600 546 mm
700 646 mm
800 746 mm
1000 946 mm
g1
1200 1146 mm

Full height mounting plates can be fixed on rear uprights. If full height mounting plate is required
to be adjustable through the depth, EG MKT Sliding rail accessories must be used. Sliding rail
accessories must be ordered separately.

148
 Full Height Mounting Plate Application Examples

EG MKT EG MKT

Adjustable Depth Application Adjustable Depth Application for ≥1000 mm Width

EG MKT page 150

EG MC Full Height EG MC

166

Short Height Application Back to Back Application

EG MKI
3 mm
Inner support rail EG MKI is providing
additional strength for fixing heavy equipment
on full height mounting plates. Full height
mounting plate is fixed after EG MKI is
positioned and fixed, so that it’s rear surface
rests on EG MKI’s front surface.

Inner Support Application

EG MKI page 151
149
Full Height Mounting Plates and Accessories

Full Height Mounting Plate

Lower-Upper Support Rail - EG MKT
Designed for situations where the full height mounting plate needs to be
adjusted through the depth.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of Lower support rail
2 pieces of Right-left upper fixing brackets
2 pieces of Middle fixing brackets
1 piece of Fittings set
(At overlapping types, full-width rail is used instead of right-left
upper fixing bracket)

Standard Type
Applicable
Series

Full height mounting plate lower-upper support rail

Enclosure rated width Order code

400 EG MKT 04
500 EG MKT 05
600 EG MKT 06
700 EG MKT 07
800 EG MKT 08
1000 EG MKT 10
1200 EG MKT 12

Overlapping Type

Standard Type

Overlapping Type

Unless otherwise specified, all dimensions are in mm.

150
Full Height Mounting Plate Inner
Support Rail - EG MKI
Designed as support rail in case of mounting heavy equipment on Full Height
Mounting Plate to be positioned at inner side.

Material : 3mm Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of Full height mounting plate inner support rail
1 piece of Fittings set

Applicable
Series

Full height mounting plate inner support rail

Enclosure Rated Width Order code

800 EG MKI 08
1000 EG MKI 10
1200 EG MKI 12

Note: EG MKI can only be used when full height

mounting plate is fixed with EG MKT.

Full Height Mounting Plate Infill Rail - EG MKA

It provides a continuous plane as mounting surface when enclosures are bayed
side by side by filling the gap between two full height mounting plates.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of MK full height infill rail
4 pieces of M5x8 self-tapping screws

Applicable
Series

Full height mounting plate infill rail

Enclosure rated height Order Code

14 EG MKA 14
16 EG MKA 16
18 EG MKA 18
20 EG MKA 20
22 EG MKA 22

Note: If full height mounting plate has to be adjusted in depth MKT

support rail must be used.

Unless otherwise specified, all dimensions are in mm.

151
Internal Mounting Accessories

EG MA

EG MB

EG ME

EG MC

EG MP 05

EG MP 10

EG MP

EG MP 15

EG MP 20

EG MP

EG MP

152
 EG DST 200

EG MG EG DST 100

EG RS

EG KSS / EG KSD

EG SY

EG MP

EG SP

153
Internal Mounting Accessories

Mounting Rail - EG MA
It is designed for general use.

Material : Galvanized steel sheet

Surface : Galvanized
TH Content : 1 piece of Mounting rail
G
N
LE

2 pieces of M5x8 Self-tapping screw

G
N
TI
N
U

O
M
E
BL
LA
AI
AV

24 Applicable
Series
19

Mounting rail

Mounting Mounting Mounting

Order Code Order Code Order Code
gap (mm) gap (mm) gap (mm)

300 EG MA 0300 900 EG MA 0900 1500 EG MA 1500

325 EG MA 0325 925 EG MA 0925 1525 EG MA 1525
350 EG MA 0350 950 EG MA 0950 1550 EG MA 1550
375 EG MA 0375 975 EG MA 0975 1575 EG MA 1575
400 EG MA 0400 1000 EG MA 1000 1600 EG MA 1600
425 EG MA 0425 1025 EG MA 1025 1625 EG MA 1625
450 EG MA 0450 1050 EG MA 1050 1650 EG MA 1650
475 EG MA 0475 1075 EG MA 1075 1675 EG MA 1675
500 EG MA 0500 1100 EG MA 1100 1700 EG MA 1700
525 EG MA 0525 1125 EG MA 1125 1725 EG MA 1725
550 EG MA 0550 1150 EG MA 1150 1750 EG MA 1750
575 EG MA 0575 1175 EG MA 1175 1775 EG MA 1775
600 EG MA 0600 1200 EG MA 1200 1800 EG MA 1800
625 EG MA 0625 1225 EG MA 1225 1825 EG MA 1825
650 EG MA 0650 1250 EG MA 1250 1850 EG MA 1850
675 EG MA 0675 1275 EG MA 1275 1875 EG MA 1875
700 EG MA 0700 1300 EG MA 1300 1900 EG MA 1900
725 EG MA 0725 1325 EG MA 1325 1925 EG MA 1925
750 EG MA 0750 1350 EG MA 1350 1950 EG MA 1950
775 EG MA 0775 1375 EG MA 1375 1975 EG MA 1975
800 EG MA 0800 1400 EG MA 1400 2000 EG MA 2000
825 EG MA 0825 1425 EG MA 1425 2025 EG MA 2025
850 EG MA 0850 1450 EG MA 1450 2050 EG MA 2050
875 EG MA 0875 1475 EG MA 1475 2075 EG MA 2075

Unless otherwise specified, all dimensions are in mm.

154
Mounting Rail - EG MB
It is designed for general use.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of Mounting rail

TH
G
N
LE
2 pieces of EG MB Fixing bracket

G
N
TI
N
U
4 pieces of M5x8 Self-tapping screw

O
M
E
BL
LA
AI
AV
Applicable
49
Series

23
2

Mounting rail

Mounting Mounting Mounting

Order Code Order Code Order Code
gap (mm) gap (mm) gap (mm)

100 EG MB 0100 775 EG MB 0775 1450 EG MB 1450

125 EG MB 0125 800 EG MB 0800 1475 EG MB 1475
150 EG MB 0150 825 EG MB 0825 1500 EG MB 1500
175 EG MB 0175 850 EG MB 0850 1525 EG MB 1525
200 EG MB 0200 875 EG MB 0875 1550 EG MB 1550
225 EG MB 0225 900 EG MB 0900 1575 EG MB 1575
250 EG MB 0250 925 EG MB 0925 1600 EG MB 1600
275 EG MB 0275 950 EG MB 0950 1625 EG MB 1625
300 EG MB 0300 975 EG MB 0975 1650 EG MB 1650
325 EG MB 0325 1000 EG MB 1000 1675 EG MB 1675
350 EG MB 0350 1025 EG MB 1025 1700 EG MB 1700
375 EG MB 0375 1050 EG MB 1050 1725 EG MB 1725
400 EG MB 0400 1075 EG MB 1075 1750 EG MB 1750
425 EG MB 0425 1100 EG MB 1100 1775 EG MB 1770
450 EG MB 0450 1125 EG MB 1125 1800 EG MB 1800
475 EG MB 0475 1150 EG MB 1150 1825 EG MB 1825
500 EG MB 0500 1175 EG MB 1175 1850 EG MB 1850
525 EG MB 0525 1200 EG MB 1200 1875 EG MB 1875
550 EG MB 0550 1225 EG MB 1225 1900 EG MB 1900
575 EG MB 0575 1250 EG MB 1250 1925 EG MB 1925
600 EG MB 0600 1275 EG MB 1275 1950 EG MB 1950
625 EG MB 0625 1300 EG MB 1300 1975 EG MB 1975
650 EG MB 0650 1325 EG MB 1325 2000 EG MB 2000
675 EG MB 0675 1350 EG MB 1350 2025 EG MB 2025
700 EG MB 0700 1375 EG MB 1370 2050 EG MB 2050
725 EG MB 0725 1400 EG MB 1400 2075 EG MB 2075
750 EG MB 0750 1425 EG MB 1425

Unless otherwise specified, all dimensions are in mm.

155
Internal Mounting Accessories

Mounting Rail - EG MC
It is designed for general use.

Material : Galvanized steel sheet

Surface : Galvanized
TH
G
N
Content : 1 piece of Mounting rail
LE
G
N
TI
N

2 pieces of M5x8 Self-tapping screw

U
O
M
E
BL

LA
AI
AV

Applicable
Series

2
23

49

Mounting rail

Mounting Mounting Mounting

Order Code Order Code Order Code
Gap (mm) Gap (mm) Gap (mm)

300 EG MC 0300 900 EG MC 0900 1500 EG MC 1500

325 EG MC 0325 925 EG MC 0925 1525 EG MC 1525
350 EG MC 0350 950 EG MC 0950 1550 EG MC 1550
375 EG MC 0375 975 EG MC 0975 1575 EG MC 1575
400 EG MC 0400 1000 EG MC 1000 1600 EG MC 1600
425 EG MC 0425 1025 EG MC 1025 1625 EG MC 1625
450 EG MC 0450 1050 EG MC 1050 1650 EG MC 1650
475 EG MC 0475 1075 EG MC 1075 1675 EG MC 1675
500 EG MC 0500 1100 EG MC 1100 1700 EG MC 1700
525 EG MC 0525 1125 EG MC 1125 1725 EG MC 1725
550 EG MC 0550 1150 EG MC 1150 1750 EG MC 1750
575 EG MC 0575 1175 EG MC 1175 1775 EG MC 1775
600 EG MC 0600 1200 EG MC 1200 1800 EG MC 1800
625 EG MC 0625 1225 EG MC 1225 1825 EG MC 1825
650 EG MC 0650 1250 EG MC 1250 1850 EG MC 1850
675 EG MC 0675 1275 EG MC 1275 1875 EG MC 1875
700 EG MC 0700 1300 EG MC 1300 1900 EG MC 1900
725 EG MC 0725 1325 EG MC 1325 1925 EG MC 1925
750 EG MC 0750 1350 EG MC 1350 1950 EG MC 1950
775 EG MC 0775 1375 EG MC 1375 1975 EG MC 1975
800 EG MC 0800 1400 EG MC 1400 2000 EG MC 2000
825 EG MC 0825 1425 EG MC 1425 2025 EG MC 2025
850 EG MC 0850 1450 EG MC 1450 2050 EG MC 2050
875 EG MC 0875 1475 EG MC 1475 2075 EG MC 2075

Unless otherwise specified, all dimensions are in mm.

156
Mounting Rail - EG ME
It is designed to be used in the depth of the panel, suitable for general use.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of Mounting rail
2 pieces of M5x8 self-tapping screw

Applicable
Series
100

24
Mounting rail
Enclosure rated depth Order Code

800 EG ME 0700
900 EG ME 0800
1000 EG ME 0900
1200 EG ME 1100

Mounting Rail - EG MG
It is designed for mounting vertically between horizontal rails.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of Mounting rail
2 pieces of M5x8 self-tapping screw

Applicable
Series

2
24

49
Mounting rail
Enclosure Rated Height Order Code

1800 EG MG 1650
2000 EG MG 1850
2200 EG MG 2050

Unless otherwise specified, all dimensions are in mm.

157
Internal Mounting Accessories

Mounting Plates - EG MP
It is providing flat mounting surface suitable for general use.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of Mounting plate
1 Piece of Connection and fixing set

Applicable
Series

Order coding table

Product Rated Product Rated Available Mounting
Height Width Width (mm)

05 (50 mm) 03 250

10 (100 mm) 04 350
15 (150 mm) 05 450
20 (200 mm) 06 550
25 (250 mm) 07 650
30 (300 mm) 08 750
35 (350 mm) 09 850
AVAILABLE MOUNTING WIDTH (mm)
40 (400 mm) 10 950
45 (450 mm) 12* 1150
PRODUCT RATED
HEIGHT (mm)

50 (500 mm)
60 (550 mm)

* Only 15 and 20 height types are available in this size.

Sample Coding: EG MP 05 03

Product Rated Product Rated

Height Width

Unless otherwise specified, all dimensions are in mm.

158
Special Mounting Rail - EG SP
It is designed for general use.

Material : 3mm Steel sheet

Surface : Galvanized

TH
G
N
LE
Content : 1 piece of Mounting profile

G
N
TI
N
U
O
1 piece of Fittings set

M
E
BL
LA

AI
AV
Applicable
Series

74

Note: For weight bearing capacity, please check Shipment Instruction / 3

20
Transportation – Loading and Storage Manual

Special mounting rail

Available Mounting Width (mm) Order Code

350 EG SP 04
450 EG SP 05
550 EG SP 06
650 EG SP 07
750 EG SP 08
850 EG SP 09
950 EG SP 10
1050 EG SP 11
1150 EG SP 12

Unless otherwise specified, all dimensions are in mm.

159
Internal Mounting Accessories

Power Factor Compensation Module - EG KSS

Designed for assembling p.f. compensation equipments. Thanks to its sliding
design it provides ease of assembly and use.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of Body plate
2 pieces of Side plates
4 pieces of Depth guide rails
1 piece of Fittings set

Applicable
Series

298
231

Power factor compensation module

Enclosure Rated Enclosure Rated
Order Code
Width Depth

400 EG KSS 0604

500 EG KSS 0605
600 600 EG KSS 0606
700 EG KSS 0607
800 EG KSS 0608
400 EG KSS 0704

EG MP 25
500 EG KSS 0705
700 600 EG KSS 0706
700 EG KSS 0707
800 EG KSS 0708
EG MP 05
400 EG KSS 0804
m 500 EG KSS 0805
0m
-10
W idth 800 600 EG KSS 0806
ted
Ra
os ure 700 EG KSS 0807
Encl
800 EG KSS 0808

Application example:

EG MP 05

EG MP 10

m
0m
-10
i dth
dW
ate
eR
osur
Encl

Unless otherwise specified, all dimensions are in mm.

160
Power Factor Compensation Mounting
Plate (Deep Type) - EG KSD
Designed for assembling p.f. compensation equipments. Thanks to its sliding
design it provides ease of assembly and use. Side mounting surfaces are
longer than the standard type, which allow addiditional means for equipment
(e.g. reactors) mounting.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of Body plate
2 pieces of Side plates
4 pieces of Depth guide rails
1 piece of Fittings set

Applicable
Series
298

365

Power factor compensation mounting plate (Deep type)

Enclosure Rated Enclosure Rated
Order Code
Width Depth

400 EG KSD 0604

500 EG KSD 0605
600 600 EG KSD 0606
700 EG KSD 0607
800 EG KSD 0608 EG MP 25

400 EG KSD 0704

500 EG KSD 0705
700 600 EG KSD 0706 EG MP 05

700 EG KSD 0707 m

0m
-10
800 EG KSD 0708 i dth
te dW
Ra
400 EG KSD 0804 re
closu
En
500 EG KSD 0805
800 600 EG KSD 0806 EG MP 05

700 EG KSD 0807 EG MP 10

800 EG KSD 0808
EG MP 15

EG MP 20
Application example:

EG MP 25

m
0m
-10
dth
Wi
ted
Ra
os ure
Encl

Unless otherwise specified, all dimensions are in mm.

161
Internal Mounting Accessories

Aluminum Rail Set - EG RS

It is designed for equipments that are to be mounted on a DIN rail.

Material : Aluminium
Surface : -
Content : 1 piece of Aluminium rail
2 pieces of Side holders
1 piece of Fixing set

Applicable
Series

Aluminium rail set

Enclosure Rated Width Order Code Net Length (L)

04 EG RS 04 246
05 EG RS 05 346
06 EG RS 06 446
07 EG RS 07 546
08 EG RS 08 646

49
10 35

43

Unless otherwise specified, all dimensions are in mm.

162
MCCB Adjustable Mounting Plate - EG SY
It is designed for adjusting the mounting depth of the MCCB.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of MCCB Mounting plate
2 pieces of Side holders
12 pieces of M5x8 Self-tapping screw

Applicable
Series

A
MCCB adjustable mounting plate
Dimension A (mm) Dimension B (mm) Order Code

80 150 EG SY 80*150
90 200 EG SY 90*200
105 200 EG SY 105*200
140 200 EG SY 140*200
140 300 EG SY 140*300
190 200 EG SY 190*200
210 300 EG SY 210*300
210 400 EG SY 210*400
280 300 EG SY 280*300
280 400 EG SY 280*400
290 300 EG SY 290*300

Unless otherwise specified, all dimensions are in mm.

163
Internal Mounting Accessories

Special Fixing Set - EG DST

It is suitable for general use and provides the possibility of forward or
backward adjustment of EG MP mounting plates.

Material : Steel sheet

Surface : Galvanized
Content : 2 pieces of Fixing body
2 pieces of Depth adjustable fixing bracket
6 pieces of M5x8 Self-tapping screw

Applicable
Series

Depth adjustment fixing set

EG DST 100
Order Code
EG DST 200

min : 59 mm min : 59 mm
maks : 114 mm maks : 214 mm

EG DST 100
EG DST 100 EG DST 200 EG 100 EG DST 200

EG DST 200 Carriying capacity

DST 100 DST 200

480 N 290 N
48 kg 29 kg

Unless otherwise specified, all dimensions are in mm.

164
19 inch Swing Frame - EG MF
It is designed for mounting 19 inch wide devices up to 38U height. It has
hinged structure and integrated lock.

Material : Galvanized steel sheet

Surface : RAL 7035 (Grey Colour)
Content : 1 piece of 19 inch Swing frame
2 pieces of Support rails in width
1 piece of Fittings set

Kullanılabilecek
Seriler

19 inch swing frame

Order Code EG MF

Note: It can be used in enclosures with rated height of 2000 and rated
width of 800 mm.

In standard design hinges are positioned at left for opening leftward.

165
Internal Mounting Accessories

Adapter Rail - HF AO
It is designed to create a mounting surface on the front side of HF series enclosures.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 2 pieces of Adapter rails
1 pieces of Fittings set

Applicable
Series

Adapter rail

Enclosure
Rated Order Codes
Height

1600 HF AO 16
2000 HF AO 20

166
Front Cover Plates and Accessories

Front Cover Frame Set - HS OS

It’s designed for fixing of front cover plates in floor-standing modular outdoor
enclosures.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 2 pieces of Height cover rails
2 pieces of Width cover rails
1 piece of Fittings set

Applicable
Series
Front cover frame set
Enclosure Rated Enclosure Enclosure Rated Enclosure
Order Code Order Code
Height Rated Width Height Rated Width

400 HS OS 1804 400 HS OS 2204

500 HS OS 1805 500 HS OS 2205
1800 600 HS OS 1806 2200 600 HS OS 2206
700 HS OS 1807 700 HS OS 2207
800 HS OS 1808 800 HS OS 2208
400 HS OS 2004
500 HS OS 2005
2000 600 HS OS 2006
700 HS OS 2007
800 HS OS 2008

Front Cover Frame Set - HF OS

It is designed for fixing of front cover plates in floor-standing monoblock
outdoor enclosures.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 2 pieces of Height cover rails
2 pieces of Width cover rails
2 pieces of Adapter rails (HF AO)
1 piece of Fittings set

Applicable
Series

Front cover frame set

Enclosure Rated Enclosure Rated
Order Codes
Height Width

600 HF OS 1606
1600
800 HF OS 1608
600 HF OS 2006
2000
800 HF OS 2008

167
Front Cover Plates and Accessories

Full Height Cover Plate - EG OB

It is designed for general use. It has a hinged structure and two quarter turn
locks.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Full height cover plate
2 pieces of Width connection rails
1 piece of Fittings set

Applicable
Series

Full height cover plate

Enclosure Rated Enclosure Rated
Order Code
Height Width

400 EG OB 1404
500 EG OB 1405
1400 600 EG OB 1406
700 EG OB 1407
800 EG OB 1408
400 EG OB 1604
500 EG OB 1605
1600 600 EG OB 1606
700 EG OB 1607
800 EG OB 1608
400 EG OB 1804
500 EG OB 1805
1800 600 EG OB 1806
700 EG OB 1807
800 EG OB 1808
400 EG OB 2004
500 EG OB 2005
2000 600 EG OB 2006
700 EG OB 2007
800 EG OB 2008
400 EG OB 2204
500 EG OB 2205
2200 600 EG OB 2206
700 EG OB 2207
800 EG OB 2208

168
Full Height Cover Plate - HS OB
It is suitable for general use in floor-standing modular outdoor type enclosures.
It has a hinged structure and two quarter turn locks.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Full height cover plate
2 pieces of Width connection rails
1 piece of Fittings set

Applicable
Series

Full height cover plate

Enclosure Rated Enclosure Rated
Order Code
Height Width

400 HS OB 1804
500 HS OB 1805
1800 600 HS OB 1806
700 HS OB 1807
800 HS OB 1808
400 HS OB 2004
500 HS OB 2005
2000 600 HS OB 2006
700 HS OB 2007
800 HS OB 2008
400 HS OB 2204
500 HS OB 2205
2200 600 HS OB 2206
700 HS OB 2207
800 HS OB 2208

169
Front Cover Plates and Accessories

Cover Plate With Hinges - EG OM

It is designed for general use. It has a hinged structure.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Cover plate
1 piece of Fittings set

Applicable
Series

A - Slotted for MCBs F - With ventilation grills

Product Product
Product Product
Width Width
Rated Order Codes Rated Order Codes
Suitable for Suitable for
Height Height
Mounting Mounting

400 EG OM 1004 400 EG OM 4504

500 EG OM 1005 500 EG OM 4505
100 600 EG OM 1006 450 600 EG OM 4506
700 EG OM 1007 700 EG OM 4507
800 EG OM 1008 800 EG OM 4508
400 EG OM 1504 (A,F) 400 EG OM 5004
500 EG OM 1505 (A,F) 500 EG OM 5005
150 600 EG OM 1506 (A,F) 500 600 EG OM 5006
700 EG OM 1507 (A,F) 700 EG OM 5007
800 EG OM 1508 (A,F) 800 EG OM 5008
400 EG OM 2004 (A,F) 400 EG OM 5504
500 EG OM 2005 (A,F) 500 EG OM 5505
200 600 EG OM 2006 (A,F) 550 600 EG OM 5506
700 EG OM 2007 (A,F) 700 EG OM 5507
800 EG OM 2008 (A,F) 800 EG OM 5508
400 EG OM 2504 400 EG OM 6504
500 EG OM 2505 500 EG OM 6505
250 600 EG OM 2506 650 600 EG OM 6506
700 EG OM 2507 700 EG OM 6507
800 EG OM 2508 800 EG OM 6508
400 EG OM 3004 400 EG OM 7504
500 EG OM 3005 500 EG OM 7505
300 600 EG OM 3006 750 600 EG OM 7506
700 EG OM 3007 700 EG OM 7507
800 EG OM 3008 800 EG OM 7508
400 EG OM 3504
500 EG OM 3505
350 600 EG OM 3506
700 EG OM 3507
800 EG OM 3508
Unless otherwise specified, all dimensions are in mm.

170
Front Cover Frame Set - EG OS
It is designed for mounting front cover plates.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 2 pieces of Height cover rails
2 pieces of Width cover rails
1 piece of Fittings set

Applicable
Series

Front cover frame set

Enclosure Rated Enclosure Rated
Order Code
Height Width

400 EG OS 1404
500 EG OS 1405
1400 600 EG OS 1406
700 EG OS 1407
800 EG OS 1408
400 EG OS 1604
500 EG OS 1605
1600 600 EG OS 1606
700 EG OS 1607
800 EG OS 1608
400 EG OS 1804
500 EG OS 1805
1800 600 EG OS 1806
700 EG OS 1807
800 EG OS 1808
400 EG OS 2004
500 EG OS 2005
2000 600 EG OS 2006
700 EG OS 2007
800 EG OS 2008
400 EG OS 2204
500 EG OS 2205
2200 600 EG OS 2206
700 EG OS 2207
800 EG OS 2208

171
Front Cover Plates and Accessories

Fixed Cover Plate - EG SO

It is designed for enclosures used as cable or busbar sections. It is fixed with
screws.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Fixed cover plate
1 piece of Fittings set

Applicable
Series

Fixed cover plate

Enclosure Rated Enclosure Rated
Order Code
Height Width

300 EG SO 1803
400 EG SO 1804
1800
500 EG SO 1805
600 EG SO 1806
300 EG SO 2003
400 EG SO 2004
2000
500 EG SO 2005
600 EG SO 2006
300 EG SO 2203
400 EG SO 2204
2200
500 EG SO 2205
600 EG SO 2206

172
Cover Plate Standard Latch Set - EG OMP
It is included in standard supply content of cover plates. It is made of
plastic material.

Material : Plastic
Surface : Black colour
Content : 10 pieces of Plastic handles set

Applicable
Series : Can be used with EG OM

Cover plate standard latch set

Order Code EG OMP

Cover Plate Standard Hinge Kit - EG OMT

It is included in standard supply content of cover plates.

Material : Steel sheet

Surface : Galvanized
Content : 2 pieces of Hinge
1 piece of Fittings set

Applicable
Series : Can be used with EG OM

Cover plate standard hinge kit

Order Code EG OMT

173
Front Cover Plates and Accessories

Cover Plate Seal Kit - EG OMM

It is designed for sealing of cover plates.

Material : Steel sheet

Surface : Galvanized
Content : 1 piece of Fixing bracket
1 piece of Fittings set
Applicable
Series : Can be used with EG OM

Cover plate seal kit

Order Code EG OMM

Cover Plate Screw Connection Kit - EG OMV

It is designed to be used in cases where screw connection is required for
fixing cover plates.

Content : 10 pieces of M6 Special screws

10 pieces of M6 Cage nuts
10 pieces of Plastic retainer washers

Applicable
Series : Can be used with EG OM

Cover plate screw connection kit

Order Code EG OMV

174
Ventilation Accessories

Ventilation Module - EG HM
It is designed to provide natural ventilation for cooling purposes.

• Wide ventilation opening

• Aesthetic appearance
• IP31 protection class

Material : Galvanized steel sheet

Surface : Painted, RAL 9005 (Black Colour)
Content : 1 piece of Ventilation module
1 piece of Fittings set

Applicable
Series

Ventilation module

Enclosure Enclosure Enclosure Enclosure

Rated Rated Order Codes Rated Rated Order Codes
Width Depth Width Depth

600 EG HM 0306 400 EG HM 0804

300 800 EG HM 0308 500 EG HM 0805
1000 EG HM 0310 800 600 EG HM 0806
400 EG HM 0404 800 EG HM 0808
500 EG HM 0405 1000 EG HM 0810
400 600 EG HM 0406 400 EG HM 1004
800 EG HM 0408 500 EG HM 1005
1000 EG HM 0410 1000 600 EG HM 1006
400 EG HM 0504 800 EG HM 1008
500 EG HM 0505 1000 EG HM 1010
500 600 EG HM 0506 400 EG HM 1204
800 EG HM 0508 500 EG HM 1205
1000 EG HM 0510 1200 600 EG HM 1206
400 EG HM 0604 800 EG HM 1208
500 EG HM 0605 1000 EG HM 1210
600 600 EG HM 0606
800 EG HM 0608
1000 EG HM 0610
400 EG HM 0704
500 EG HM 0705
700 600 EG HM 0706
800 EG HM 0708
1000 EG HM 0710

For lifting and transporting by crane, EG HMT 01 lifting kit with

hexagonal shaft shall be ordered additionally.

Planing air inflow is necessary to ensure proper ventilation.

175
Ventilation Accessories

Roof Top Fan - EG FM

It is designed to cool equipments inside of the enclosure efficiently.

• Easy to set-up
• Radial fan with backward blade angle
• Quick and easy assembling feature that does not require bolt connection

• IP20 protection class

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 piece of Roof top fan

Applicable
Series

Roof top fan

Order Code EG FM

Note: It cannot be used on 40 cm wide

enclosures.

Measured cooling capacities

Unless otherwise specified, all dimensions are in mm.

176
Under-Canopy Ventilation Set - HS FM
It is designed for ventilation under the roof in floor-standing modular
outdoor enclosures.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 pcs Axial fan motor
1 Piece of Fan fixing plate
1 Piece of Filter
1 piece of Filter holding plate
1 Piece of Fittings set

Applicable
Series

Under-canopy ventilation set

Order Code HS FM

Note: Planing air inflow is necessary to ensure proper ventilation.

Under-Canopy Ventilation Set - HF FM

It is designed for ventilation under the canopy in floor-standing monoblock
outdoor enclosures.

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour)
Content : 1 pcs Axial fan motor
1 piece of Fan fixing basket
2 pieces of Basket holding plates
1 piece of Fittings set

Applicable
Series

Under-canopy ventilation set

Order Code HF FM

Note: Planing air inflow is necessary to ensure proper ventilation.

177
Ventilation Accessories

Fan-Filter Unit - EG FAN

It is designed for cooling when the ambient temperature is lower than the
interior temperature of the enclosure.

• Quick and easy assembly without tools

• Quick and easy filter change from outside
• IP44 protection class

Material : Plastic
Surface : RAL 7035 (Grey Colour)
Content : 1 piece of plastic filtered fan

Applicable
Series

Fan-filter unit
Order Product Voltage Frequency Flow Power Noise Level Fan Flow
Code Dimension V Hz A W dBA m3/h

EG FAN 12 150x150 220/240 50/60 0,14 21 48 82

EG FAN 25 250x250 220/240 50/60 0,22 38 59 300

Roller bearing motors are used in fan.

Fan-filter unit
Order Code B1 x H1 mm B2 x H2 mm T1 mm T2 mm

EG FIL-FAN 12 150x150 123x123 13 67

EG FIL-FAN 25 250x250 223x223 13 115

Filter Unit - EG FIL

It is designed for cooling when the ambient temperature is lower than the
interior temperature of the enclosure.

• Quick and easy assembly without tools

• Quick and easy filter change from outside
• IP44 protection class

Material : Plastic
Surface : RAL 7035 (Grey Colour)
Content : 1 piece of plastic filtered louvre
Applicable
Series

Filter unit
Product Dimension Protection Class Order code

150x150 IP44 EG FIL 12 44

250x250 IP44 EG FIL 25 44

Spare Filter - EG FS
It is designed to be used as a spare in filtered louvres.

• Washable, • G2 class
Spare Filter (IP44)
Product Dimension Order code

125x125 EG FS 12 44
250x250 EG FS 25 44

178
Thermostat - EG ET
It is used to control the fans that can be operated in case the temperature
inside the enclosure increases.

• 0-60 ºC temperature setting range

• Quick and easy mounting feature, suitable for 35 mm DIN rail

Material : ABS UL94 V0 Flame retardant

Content :
1 piece of Thermostat

Applicable
Series

Thermostat
Order Code EG ET 01

Fan-Filter Unit With Thermostat - EG FAT

It is designed for cooling when the ambient temperature is lower than the
interior temperature of the enclosure.

• 0-60 ºC temperature setting range

• Quick and easy mounting feature, suitable for 35 mm DIN rail

Material : ABS UL94 V0 Flame retardant

Content :
1 piece of Filtered fan with thermostat

Applicable
Series

Note: For fan and filter details, please check product pages with EG FAN and
EG FIL codes.
Fan-filter unit with thermostat
Order Code EG FAT 12
EG FAT 25

179
Base and Cable Entry Accessories

Plinth Set - EG BZ
Mounted under existing plinth of the enclosure, it allows the enclosure to be
raised 100 mm more.

Material : Galvanized steel sheet

Surface : Painted, RAL 9005 (Black Colour)
Content : 4 pieces of Plinth corners
4 pieces of Plinth rails
1 piece of Fittings set

Applicable
Series

Plinth Set

Enclosure Enclosure Enclosure Enclosure

Rated Rated Order Codes Rated Rated Order Codes
Width Depth Width Depth

400 EG BZ 0404 400 EG BZ 1004

500 EG BZ 0405 500 EG BZ 1005
400 600 EG BZ 0406 1000 600 EG BZ 1006
700 EG BZ 0407 700 EG BZ 1007
800 EG BZ 0408 800 EG BZ 1008
400 EG BZ 0504 400 EG BZ 1204
500 EG BZ 0505 500 EG BZ 1205
500 600 EG BZ 0506 1200 600 EG BZ 1206
700 EG BZ 0507 700 EG BZ 1207
800 EG BZ 0508 800 EG BZ 1208
400 EG BZ 0604
500 EG BZ 0605
600 600 EG BZ 0606
700 EG BZ 0607
800 EG BZ 0608
400 EG BZ 0704
500 EG BZ 0705
700 600 EG BZ 0706
700 EG BZ 0707
800 EG BZ 0708
400 EG BZ 0804
500 EG BZ 0805
800 600 EG BZ 0806
700 EG BZ 0807
800 EG BZ 0808

180
Plinth Set - XS BZ
Mounted under existing plinth of the enclosure, it allows the enclosure to be
raised 100 mm more.

Material : AISI 304 grade stainless-steel sheet

Surface : -
Content : 4 pieces of Plinth corners
4 pieces of Plinth rails
1 piece of Fittings set

Applicable
Series

Plinth Set

Enclosure Enclosure Enclosure Enclosure

Rated Rated Order Codes Rated Rated Order Codes
Width Depth Width Depth

400 XS BZ 0404 400 XS BZ 1004

500 XS BZ 0405 500 XS BZ 1005
400 600 XS BZ 0406 1000 600 XS BZ 1006
700 XS BZ 0407 700 XS BZ 1007
800 XS BZ 0408 800 XS BZ 1008
400 XS BZ 0504 400 XS BZ 1204
500 XS BZ 0505 500 XS BZ 1205
500 600 XS BZ 0506 1200 600 XS BZ 1206
700 XS BZ 0507 700 XS BZ 1207
800 XS BZ 0508 800 XS BZ 1208
400 XS BZ 0604
500 XS BZ 0605
600 600 XS BZ 0606
700 XS BZ 0607
800 XS BZ 0608
400 XS BZ 0704
500 XS BZ 0705
700 600 XS BZ 0706
700 XS BZ 0707
800 XS BZ 0708
400 XS BZ 0804
500 XS BZ 0805
800 600 XS BZ 0806
700 XS BZ 0807
800 XS BZ 0808

181
Base and Cable Entry Accessories

Bottom Gland Plate Set - ES BO

It is designed for easy and fast cable entry.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of Gland plate frame
Gland plate cover (ES TK) please check the table below
1 piece of Fittings set

Applicable
Series

Bottom gland plate set Module sets with overlapping door

Enclosure Enclosure Enclosure Enclosure

Rated Rated Order Codes Rated Rated Order Codes
Width Depth Width Depth

400 ES BO 0404 400 ES BO 5504

500 ES BO 0405 500 ES BO 5505
400 600 ES BO 0406 1000 600 ES BO 5506
700 ES BO 0407 700 ES BO 5507
800 ES BO 0408 800 ES BO 5508
400 ES BO 0504 400 ES BO 6604
500 ES BO 0505 500 ES BO 6605
500 600 ES BO 0506 1200 600 ES BO 6606
700 ES BO 0507 700 ES BO 6607
800 ES BO 0508 800 ES BO 6608
400 ES BO 0604 400 ES BO 7704
500 ES BO 0605 500 ES BO 7705
600 600 ES BO 0606 1400 600 ES BO 7706
700 ES BO 0607 700 ES BO 7707
800 ES BO 0608 800 ES BO 7708
400 ES BO 0704 400 ES BO 8804
500 ES BO 0705 500 ES BO 8805
700 600 ES BO 0706 1600 600 ES BO 8806
700 ES BO 0707 700 ES BO 8807
800 ES BO 0708 800 ES BO 8808
400 ES BO 0804
500 ES BO 0805 Enclosure ES TK Content (Type)
Rated
800 600 ES BO 0806 Depth A B C
700 ES BO 0807 400 2 2 -
800 ES BO 0808 500 - 2 1
600 - 1 2
700 - 2 2
800 - 1 3

182
Cable Attachment Rail - EG KTP
It is designed for attaching cables at incoming inside the enclosure.

• Their bending angle prevents cables from being damaged.

• Claw shaped structure facilitate attachment of cable ties.

Material : Galvanized steel sheet

Content : 1 piece of Cable attachment rail
2 pieces of M5x8 Self-tapping screws

Applicable
Series

Cable attachment rail

Enclosure Rated Width Order Code

400 EG KTP 04
500 EG KTP 05
600 EG KTP 06
700 EG KTP 07
800 EG KTP 08
1000 EG KTP 10
1200 EG KTP 12

Brush for Bottom Cable Entry - EG OF

It is used for multiple cable passage at cable entry plates of the enclosures.

• Can be used by cutting to desired size

• It has a nailed structure that provides ease of assembly

Material : PVC
Surface : Painted, Black Colour
Content : 2 meters of Brush for bottom cable entry

Applicable
Series

Brush for bottom cable entry

Order Code EG OF

183
Base and Cable Entry Accessories

Gland Plate Gasket Set - EG BOC

They are used to seal bottom cover plates.

Material : Polyethylene
Surface : Anthracite colour
Content : 6 meters of 5X15 mm One-sided adhesive tape

5
Applicable
15
Series

Gland plate gasket set

Order Code EG BOC

Gland Plate With Brush - EG FR

It is used for multiple cable transits from the cable entry plates of the panels.

50 Material : Galvanized steel sheet

Surface : Black colour
Content :
1 piece of Gland plate
2 pieces of PVC brushes
1 piece of Fittings pack

Applicable
Series

Gland plate with brush

Gland Plate Rated Dimension Size A Order code

400 300 EG FR 40
600 500 EG FR 60

Note: In case of using a gland plate with brush, the IP protection level of the
enclosure will decrease to IP 00.

184
Locks
XS KT 01 Stainless-Steel Swinghandle
Lock - XS KT
Lift-turn lock system made of AISI 316 grade stainless-steel

Material : AISI 316 grade Stainless-steel

Surface : -
Content : 1 piece of Stainless-steel swinghandle lock

Applicable
Series

Stainless-steel swinghandle lock

Order Code XS KT 01

XS KT 02 Stainless-Steel Padlockable
Swinghandle Lock - XS KT
Padlockable lift-turn lock system made of AISI 316 grade stainless-steel

Material : AISI 316 grade stainless-steel

Surface : -
Content : 1 piece of Stainless-steel padlockable swinghandle lock

Applicable
Series

Stainless-steel padlockable swinghandle lock

Order Code XS KT 02

185
Locks

ES KT 01 Swinghandle Lock With Button - ES KT

Swinghandle latch with button is designed and patented by EAE. The key
can be removed in unlocked position, allowing keyless use.

Material : Aluminium
Surface : Black Painted
Content : 1 piece of Swinghandle lock

Applicable
Series

ES KT 01 Swinghandle lock with button

Order Code ES KT 01

EG KT 01 Swinghandle Lock - EG KT
Standard swinghandle lock with lift-turn feature.

Material : Zamak
Surface : Black Colour
Content : 1 piece of Swinghandle lock

Applicable
Series

EG KT 01 swinghandle lock
Order Code EG KT 01

Unless otherwise specified, all dimensions are in mm.

186
Enclosure Baying

Enclosure Baying Kit - EG PB 00

• It is used for transporting more than one enclosure or for baying them on-site.
• Robust baying at 10 points

Surface : Galvanized
Content : 10 pieces of Special M6 bolts
10 pieces of M6 Spring zamak nut
6 meters gasket set (IP40 version does not include gasket set)

Applicable
Series

Enclosure baying kit

Protection class Order Code

IP40 EG PB 00 IP40
IP55 EG PB 00 IP55

Enclosure Baying Kit - EG PB 03

• It is used for transporting more than one enclosure or for baying them on-site.

• Installation from inside the enclosure without removing the mounting plate.
• Robust baying at 6 points

Material : Steel sheet (4 mm thickness)

Surface : Galvanized
Content : 6 pieces of PB 03 Enclosure baying bracket
24 pieces of M5x12 self-tapping screws
6 meters gasket set (IP40 version does not include gasket set)

Applicable
Series

Enclosure baying kit

Protection class Order Code

IP40 EG PB 03 IP40
IP55 EG PB 03 IP55

Unless otherwise specified, all dimensions are in mm.

187
Document Pockets

Project Document Pocket - EG PC

It has the feature of sticking with self-adhesive double-sided tape suitable for
A4 paper size. It can be fixed with bolts if desired.

241 Material : Polystyrene

Surface : Black colour
Content : 1 piece of Plastic drawing pocket

Applicable
234

Series

257 31

Project document pocket

Order Code EG PC

Project Document Pocket - EG SC

Used for drawing file and folders.

• It can be fixed at the desired height on support rails located inner side of the door.
• Suitable for 75 mm thick folders.

Material : Galvanized steel sheet

Surface : Painted, RAL 9005 (Black Colour)
Content : 1 piece of Sheet metal drawing pocket
4 pieces of M5x8 self-tapping screw
Double sided adhesive tape

Applicable
Series

Steel project pocket - ES, ED, EL, XS Steel project pocket - HS, HF
Enclosure rated width Order Code Enclosure rated width Order Code

400 EG SC 04 500 EG SC 04
500 EG SC 05 600 EG SC 05
600 EG SC 06 700 EG SC 06
700 EG SC 07 800 EG SC 07
800 EG SC 08

188
Door Holders

Door Holder Set - HF KS

It is designed to hold the front door of free standing monoblock outdoor
enclosure open.

Material : Galvanized steel sheet

Surface : Galvanized
Content : 1 piece of Door holder
1 piece of Fittings set

Applicable
Series

Door holder set

Order Code HF KS

> 90°

Door Holder Set - EG DT

It is designed to hold the front door of free standing modular enclosure open.

Material : Steel sheet

Surface : Galvanized
Content : 1 piece of Slotted door rail
1 piece of Fixing bracket
1 piece of Slider arm
1 piece of Fittings set

Applicable
Series

Door holder set

Order Code EG DT

Unless otherwise specified, all dimensions are in mm.

189
Lifting Accessories

Lifting Kit - EG AT 01
• It is used for lifting enclosures by crane.

Material : DIN582 - C15E

Surface : Galvanized
Content : 4 pieces of M12 Eyebolt

Applicable
Series

Lifting kit
Order Code EG AT 01

Please act in accordance with the rules specified in

the transportation and loading instructions.

Dual Lifting Kit - EG AT 02

• It is used for lifting bayed enclosures by crane.

• It has a robust design for safe transportation of enclosures.

Material : Steel sheet

Surface : Galvanized
Content : 2 pieces of Dual lifting brackets
4 pieces of Aluminium rings

Applicable
Series

Dual lifting kit

Order Code EG AT 02

Please act in accordance with the rules specified in

the transportation and loading instructions.

190
Ventilation Module Lifting Kit - EG HMT 01
It is used when lifting enclosures with ventilation module by crane.

Surface : Galvanized
Content : 4 pieces of M12 Lifting eyebolts
4 pieces of Steel shafts
4 pieces of Aluminum rings

Applicable
Series

Ventilation module lifiting kit

Order Code

For Single Enclosure EG HMT 01

Please act in accordance with the rules specified in

the transportation and loading instructions.

Ventilation Module Dual Lifting Kit - EG HMT 02

It is used when lifting bayed enclosures with ventilation module by crane.

Surface : Galvanized
Content : 2 pieces of M12 Dual lifting brackets
4 pieces of Steel shafts
4 pieces of Aluminum rings

Applicable
Series

Ventilation module dual lifting kit

Order Code

For Bayed Enclosures EG HMT 02

Please act in accordance with the rules specified in

the transportation and loading instructions.

191
Other Accessories

Spring Zamak Nut - EG CY

It is designed for general use.

Material : Zamak
Content : 10 pieces of Spring zamak nuts

Applicable
Series

Spring zamak nut

Size Order Code

M6 EG CY M6
M8 EG CY M8

Zamak Nut - EG CZ
It is designed for general use.

Material : Zamak
Content : 10 pieces of Zamak nuts

Applicable
Series

Zamak nut
Size Order Code

M6 EG CZ M6
M8 EG CZ M8

Unless otherwise specified, all dimensions are in mm.

192
M5x8 mm Self-Tapping Screw - EG CK 5
Special spiral metric thread structure. It has self-tapping feature for sheet
metal surface.

Material : Steel
Surface : Galvanized coating
Content : 100 pieces of M5x8 mm self-tapping screw

Applicable
Series

M5x8 mm self-tapping screw

Order Code EG CK 5

Snap-On Gasket - EG GC
It is designed to prevent damages from sharp surfaces.

• Can be used by cutting to desired size

• It has a clawed structure that provides ease of assembly.

15
Material : PVC
15 10
Surface : Black colour
Content : Shown as in the table below.
10
Applicable
Series 6.9

EG GC 01
9.4

5.3
Snap-on gasket 2
Sheet
Content Wire-Reinforced Order Code
Range
2

3 meters 1.0 - 2.0 mm Yes EG GC 01

8

4 meters 0.8 - 1.5 mm No EG GC 02

0.5
EG GC 02

Unless otherwise specified, all dimensions are in mm.

193
Other Accessories

Interior Lighting Fixture - EG KL

It is designed to illuminate the inside of the enclosure.

• Has magnetic sensor that does not require an additional switch

• Manual on/off switch connected in series with magnetic sensor contacts
• Light Colour - natural white
• LED - without lens, 120º light angle

Material : Polycarbonate
Content : 1 piece of Indoor lighting fixture
1 piece of Neodymium magnet
2 pieces of M5x12 mm self-tapping screw

Applicable
Series

Interior lighting fixture

Order Code

EG KL 220V AC 25 cm
EG KL 220V AC 50 cm
EG KL 24V DC 25 cm
EG KL 24V DC 50 cm

EG MB Fixing Set - EG MBT

It is used for fixing when EG MB mounting rails are cutted.

Material : Steel sheet

Surface : Galvanized
Content : Quantitiy of fixings are given in table below.

Applicable
Series

EG MBT fixing set

Dimension A Quantity of Fixing Order Code

20 mm 2 EG MBT 00
25 mm 10 EG MBT 05
30 mm 10 EG MBT 10
35 mm 10 EG MBT 15
40 mm 10 EG MBT 20 A

Unless otherwise specified, all dimensions are in mm.

194
Busbar Riser Module - EG BY
• It is designed to provide cost advantage and space saving in panels where
busbar trunking module is used.

Material : Galvanized steel sheet

Surface : Painted, RAL 9005 Black Colour
Content : 1 piece of Busbar module
1 piece of Fittings set

Applicable
Series

Busbar riser module

Enclosure Enclosure Enclosure Enclosure

Rated Rated Order Codes Rated Rated Order Codes
Width Depth Width Depth

600 EG BY 0306 400 EG BY 0804

300 800 EG BY 0308 500 EG BY 0805
1000 EG BY 0310 800 600 EG BY 0806
400 EG BY 0404 800 EG BY 0808
500 EG BY 0405 1000 EG BY 0810
400 600 EG BY 0406 400 EG BY 1004
800 EG BY 0408 500 EG BY 1005
1000 EG BY 0410 1000 600 EG BY 1006
400 EG BY 0504 800 EG BY 1008
500 EG BY 0505 1000 EG BY 1010
500 600 EG BY 0506 400 EG BY 1204
800 EG BY 0508 500 EG BY 1205
1000 EG BY 0510 1200 600 EG BY 1206
400 EG BY 0604 800 EG BY 1208
500 EG BY 0605 1000 EG BY 1210
600 600 EG BY 0606
800 EG BY 0608
1000 EG BY 0610
400 EG BY 0704
500 EG BY 0705
700 600 EG BY 0706
800 EG BY 0708
1000 EG BY 0710

If lifting by crane is needed EG HMT lifting kit shall be used.

195
Other Accessories

Wall Fixing Set - ES DS

It is designed for fixing the top of the enclosure to the wall.

Material
: Steel sheet
Surface
: Galvanized
Content
: 1 piece of Left fixing bracket
1 piece of Right fixing bracket
2 pieces of M12 steel anchorage bolt

Applicable
Series

Wall fixing set

Order Code ES DS

Laptop Table - EG DB
It is designed for laptop use during service and maintenance.

• Thanks to its folding design, it does not take up space in the enclosure.
• It is fixed on support rails located at inner side of the door.

Material : Galvanized steel sheet

Surface : Painted, RAL 9005 (Black Colour)
Content : 1 piece of Laptop table
1 piece of Fittings set

Applicable
Series

Laptop table
Enclosure Rated Width Order Code Dimension A Dimension B

500 EG DB 05 288 380

600 EG DB 06 388 380
700 EG DB 07 488 270
800 EG DB 08 588 420
Unless otherwise specified, all dimensions are in mm.

196
Corner Module - EG KM
It is designed to create a layout with corner in accordance with the mounting
125
location.

Material : Galvanized steel sheet

Surface : Painted - body RAL 7035 (Grey Colour)
and plinth RAL 9005 (Black Colour)
Content : 1 piece of Corner module welded frame
1 piece of Corner module plinth
1 piece of Fittings set

Applicable
Series

Corner module
Enclosure Enclosure Enclosure Enclosure
Order Code Order Code
Rated Height Rated Depth Rated Height Rated Depth

2000 400 EG KM 2004 2200 400 EG KM 2204

2000 500 EG KM 2005 2200 500 EG KM 2205
2000 600 EG KM 2006 2200 600 EG KM 2206
2000 700 EG KM 2007 2200 700 EG KM 2207
2000 800 EG KM 2008 2200 800 EG KM 2208

Screen Module - EG MR
It is designed for housing monitor/keyboard.

• Suitable for 19 inch monitors

• It has a protective glass for the display section.
• Keyboard section can be tilted or kept closed.
• Suitable for 800 mm door width

Material : Galvanized steel sheet

Surface : Painted, RAL 7035 (Grey Colour) (Standard enclosure colour.)
Content : Display module
1 piece of Fittings set
6 meters of gasket

Applicable
Series

Screen module
Order Code EG MR

Unless otherwise specified, all dimensions are in mm.

197
Other Accessories

Cable Module - EG CM
It is designed to make easy the entry and exit of cables into the panel in the
sections with cable density. With this product, the depth sizes of only the relevant
panels will be expanded without increasing the depth of all panels.

Material : Galvanized steel sheet

Surface : Painted - body RAL 7035 (Grey Colour)
1 piece of Cable module welded frame
Content : 1 piece of Fittings set

Applicable
Series

Cable module
Enclosure Enclosure Enclosure Enclosure
Order Code Order Code
Rated Height Rated Depth Rated Height Rated Depth

2000 400 EG CM 2004 2200 400 EG CM 2204

2000 500 EG CM 2005 2200 500 EG CM 2205
2000 600 EG CM 2006 2200 600 EG CM 2206
2000 700 EG CM 2007 2200 700 EG CM 2207
2000 800 EG CM 2008 2200 800 EG CM 2208
2000 1000 EG CM 2010 2200 1000 EG CM 2210
2000 1200 EG CM 2012 2200 1200 EG CM 2212
2000 1400 EG CM 2014 2200 1400 EG CM 2214

198
TECHNICAL INFORMATION

199
Forced ventilation airflow calculation according to IEC 61439-2

Verification of the temperature-rise of an assembly with active cooling (e.g., forced cooling, internal air conditioning, heat exchanger,
etc.) and a total supply current not exceeding 1 600 A may be made by calculation.

Calculation procedure

1) Calculate the permissible air temperature-rise inside the assembly by subtracting the maximum ambient air temperature outside
the assembly from the lowest permissible maximum operating air temperature of all devices and components installed in the
assembly as declared by the device manufacturer.

2) Determine the total effective power loss as explained in [Link] of IEC 61439-1:2020. The effective power losses of all circuits
including interconnecting conductors shall be calculated assuming the circuits are operating at their group rated current.

3) Calculate the maximum power loss the assembly enclosure can dissipate without ventilation and active cooling by using the
method given in IEC TR 60890 or the enclosure manufacturer’s declared power dissipation data.

4) Determine the power to be dissipated by active cooling by subtracting the maximum power loss the enclosure can dissipate
without ventilation and active cooling from the total effective power loss.

5) From the cooling equipment manufacturer’s data, determine the cooling equipment required (e.g., a fan) to ensure that the power
to be dissipated by the active cooling can be removed by the active cooling without the air temperature-rise inside the enclosure
𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃890 𝑃𝑃𝑃𝑃 −𝑃𝑃𝑃𝑃
exceeding the permissible maximum value. 𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 = [𝑚𝑚𝑚𝑚3 /𝑠𝑠𝑠𝑠] = 3,1 ∙ 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 [𝑚𝑚𝑚𝑚3 /ℎ]
1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 � 𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 )

𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃 𝑃𝑃𝑃𝑃 −𝑃𝑃𝑃𝑃

𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃
𝑚𝑚𝑚𝑚 =890
890
3 3−𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 �
[𝑚𝑚𝑚𝑚3 /𝑠𝑠𝑠𝑠] =−𝑃𝑃𝑃𝑃3,1
𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 ∙ 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙
𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
3 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 )
[𝑚𝑚𝑚𝑚3 /ℎ]
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 = 1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖[𝑚𝑚𝑚𝑚 𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖[𝑚𝑚𝑚𝑚
1 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾 𝑚𝑚𝑚𝑚/𝑠𝑠𝑠𝑠]
1 𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 ∙𝐾𝐾𝐾𝐾 = 3,1 ∙ 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾 /ℎ]
𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
� = 𝑚𝑚𝑚𝑚
1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇�𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇 � � � = 3,1 � 𝑊𝑊𝑊𝑊∙ℎ𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖� 𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑚𝑚𝑚𝑚
𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇 −𝑇𝑇𝑇𝑇 )
1160 𝐽𝐽𝐽𝐽 1160 𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠
𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃890 𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 −𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
3 ∙𝐾𝐾𝐾𝐾3 /𝑠𝑠𝑠𝑠] =
𝑚𝑚𝑚𝑚[𝑚𝑚𝑚𝑚
3
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 = 1 1 3,1𝑚𝑚𝑚𝑚∙3 ∙𝐾𝐾𝐾𝐾 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾 [𝑚𝑚𝑚𝑚 /ℎ]
Forced ventilation airflow calculation 1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖3𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚��
1 𝑚𝑚𝑚𝑚 ∙𝐾𝐾𝐾𝐾 1160 1 𝐽𝐽𝐽𝐽 𝑚𝑚𝑚𝑚�3 ∙𝐾𝐾𝐾𝐾 = � 𝑚𝑚𝑚𝑚𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇
3�∙𝐾𝐾𝐾𝐾= 3,1 �−𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 ) �
𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
𝑊𝑊𝑊𝑊∙ℎ
� �= � �1160
= 3,1𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠
� �
1160 𝐽𝐽𝐽𝐽 𝑃𝑃𝑃𝑃1160
𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠 , 𝑃𝑃𝑃𝑃 𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠 𝑊𝑊𝑊𝑊∙ℎ

1 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾 1 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾

� �= � � = 3,1 � �
1160 𝐽𝐽𝐽𝐽 1160 𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠 𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠 , 𝑃𝑃𝑃𝑃 𝑊𝑊𝑊𝑊∙ℎ
𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠
𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃 , 𝑃𝑃𝑃𝑃 𝑃𝑃𝑃𝑃 𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 , 𝑃𝑃𝑃𝑃
890 𝑃𝑃𝑃𝑃 −𝑃𝑃𝑃𝑃
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 = 890
[𝑚𝑚𝑚𝑚3 /𝑠𝑠𝑠𝑠] = 3,1 ∙ 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 [𝑚𝑚𝑚𝑚3 /ℎ]
1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 � 𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 )
𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃 3 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 , 𝑃𝑃𝑃𝑃890 𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 −𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑉𝑉𝑉𝑉 =
=𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑚𝑚𝑚𝑚 =
𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃890
𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃890
𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃
1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇
[𝑚𝑚𝑚𝑚3 /𝑠𝑠𝑠𝑠] = 3,1890
𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 � [𝑚𝑚𝑚𝑚 3
𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖890 3
/𝑠𝑠𝑠𝑠] = 3,1 ∙
𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 −𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
𝑃𝑃𝑃𝑃∙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑃𝑃𝑃𝑃𝑃𝑃𝑃𝑃𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇
𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠
𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙
,𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃
𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 −𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙
𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑃𝑃𝑃𝑃
𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇
𝑙𝑙𝑙𝑙
𝑙𝑙𝑙𝑙 [𝑚𝑚𝑚𝑚 /𝑠𝑠𝑠𝑠] = 3,1 ∙
[𝑚𝑚𝑚𝑚33 /ℎ]
𝑚𝑚𝑚𝑚 ) 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
[𝑚𝑚𝑚𝑚33 /ℎ]
𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙
, 𝑃𝑃𝑃𝑃890𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑖𝑖𝑖𝑖 [𝑚𝑚𝑚𝑚3 /ℎ]
𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑚𝑚𝑚𝑚
𝑚𝑚𝑚𝑚 = 1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇
𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃
1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖
890
1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇
𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
−𝑇𝑇𝑇𝑇
−𝑇𝑇𝑇𝑇
𝑚𝑚𝑚𝑚
𝑚𝑚𝑚𝑚
�
� [𝑚𝑚𝑚𝑚 3 /𝑠𝑠𝑠𝑠] = 13,1 ∙𝑚𝑚𝑚𝑚𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇
𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
𝑃𝑃𝑃𝑃 3
𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙∙𝐾𝐾𝐾𝐾
𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑖𝑖𝑖𝑖−𝑃𝑃𝑃𝑃
𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇 𝑖𝑖𝑖𝑖 −𝑇𝑇𝑇𝑇 −𝑇𝑇𝑇𝑇
𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙
𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 �
𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙
)
𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
1 𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 ∙𝐾𝐾𝐾𝐾
−𝑇𝑇𝑇𝑇 𝑚𝑚𝑚𝑚 ) 3 [𝑚𝑚𝑚𝑚 /ℎ] 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾 𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 )
𝑖𝑖𝑖𝑖=𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙�𝑖𝑖𝑖𝑖−𝑃𝑃𝑃𝑃
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 = 1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖890 𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 � [𝑚𝑚𝑚𝑚 3 /𝑠𝑠𝑠𝑠] = 3,1�∙ 𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇 −𝑇𝑇𝑇𝑇
𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 �𝑚𝑚𝑚𝑚 ) [𝑚𝑚𝑚𝑚� 3=/ℎ]
𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 3,1 𝑇𝑇𝑇𝑇𝑎𝑎𝑎𝑎 � 𝑊𝑊𝑊𝑊∙ℎ �
1160 𝐽𝐽𝐽𝐽 1160−𝑇𝑇𝑇𝑇 )𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠
1 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾
1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇
1
𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾
−𝑇𝑇𝑇𝑇
𝑚𝑚𝑚𝑚 �
𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾 𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇 , 𝑃𝑃𝑃𝑃890𝑚𝑚𝑚𝑚
𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑖𝑖𝑖𝑖
1 �𝑚𝑚𝑚𝑚 ∙𝐾𝐾𝐾𝐾 � = 1160
𝑚𝑚𝑚𝑚33𝐽𝐽𝐽𝐽∙𝐾𝐾𝐾𝐾 1 �𝑚𝑚𝑚𝑚 𝑚𝑚𝑚𝑚 3 ∙𝐾𝐾𝐾𝐾 � = 3,1 �𝑚𝑚𝑚𝑚
3 ∙𝐾𝐾𝐾𝐾 𝑚𝑚𝑚𝑚 3 ∙𝐾𝐾𝐾𝐾� 𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑖𝑖𝑖𝑖 𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
1160 1
3 ∙𝐾𝐾𝐾𝐾 � = 1
1 𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠 3
𝑊𝑊𝑊𝑊∙ℎ∙𝐾𝐾𝐾𝐾 𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃890 𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 −𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑖𝑖𝑖𝑖
1
1160 � 3𝐽𝐽𝐽𝐽𝐽𝐽𝐽𝐽 � = 1160
1160
� 𝑚𝑚𝑚𝑚 1160 � 𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠� 𝑚𝑚𝑚𝑚 3 ∙𝐾𝐾𝐾𝐾 � = 3,1 � 3 �
𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠
3 ∙𝐾𝐾𝐾𝐾� = 3,1 � 𝑊𝑊𝑊𝑊∙ℎ
𝑚𝑚𝑚𝑚 ∙𝐾𝐾𝐾𝐾
𝑊𝑊𝑊𝑊∙ℎ
3 ∙𝐾𝐾𝐾𝐾� 𝑇𝑇𝑇𝑇
𝑇𝑇𝑇𝑇𝑎𝑎𝑎𝑎
𝑘𝑘𝑘𝑘
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 = [𝑚𝑚𝑚𝑚3 /𝑠𝑠𝑠𝑠] = 3,1 ∙
� 𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠 ,𝑇𝑇𝑇𝑇𝑃𝑃𝑃𝑃 1160∙𝑘𝑘𝑘𝑘∙�𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 � 𝑘𝑘𝑘𝑘∙(𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
1 𝑚𝑚𝑚𝑚
1160 � 𝐽𝐽𝐽𝐽 � = 1160 � 𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠 � = 3,1 � ∙𝐾𝐾𝐾𝐾 1 𝑚𝑚𝑚𝑚 𝑚𝑚𝑚𝑚
𝑊𝑊𝑊𝑊∙ℎ 𝑎𝑎𝑎𝑎
1160 3 𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠 𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚3 𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 3
1160
1 𝐽𝐽𝐽𝐽
𝑚𝑚𝑚𝑚 ∙𝐾𝐾𝐾𝐾 1
𝑊𝑊𝑊𝑊∙ℎ
𝑚𝑚𝑚𝑚 𝑖𝑖𝑖𝑖
∙𝐾𝐾𝐾𝐾 𝑚𝑚𝑚𝑚3/ℎ]∙𝐾𝐾𝐾𝐾
𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠 , 𝑃𝑃𝑃𝑃
𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠
𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙1160
, 𝑃𝑃𝑃𝑃 � �= �
𝑇𝑇𝑇𝑇𝑎𝑎𝑎𝑎 � = 3,1 � 𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
𝑘𝑘𝑘𝑘
[𝑚𝑚𝑚𝑚
𝑊𝑊𝑊𝑊∙ℎ
�
𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠
𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠 , 𝑃𝑃𝑃𝑃 𝐽𝐽𝐽𝐽 installed1160
: Total power𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙
losses 𝑙𝑙𝑙𝑙𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠
𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
inside , 𝑃𝑃𝑃𝑃890the 𝑘𝑘𝑘𝑘 enclosure [𝑊𝑊𝑊𝑊]
[𝑚𝑚𝑚𝑚3 /ℎ] 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾
𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠 , 𝑃𝑃𝑃𝑃 1 1 𝑚𝑚𝑚𝑚3 ∙𝐾𝐾𝐾𝐾
𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 , 𝑃𝑃𝑃𝑃890 [𝑚𝑚𝑚𝑚 /ℎ] 3
℃ � �= � � = 3,1 � 𝑊𝑊𝑊𝑊∙ℎ �
𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙
𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 , 𝑃𝑃𝑃𝑃890
𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 890 : Calculated power dissipation 𝑘𝑘𝑘𝑘 of the enclosure [𝑊𝑊𝑊𝑊] 1160 𝐽𝐽𝐽𝐽 1160 𝑊𝑊𝑊𝑊∙𝑠𝑠𝑠𝑠
𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 , 𝑃𝑃𝑃𝑃890 𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑖𝑖𝑖𝑖 [𝑊𝑊𝑊𝑊]
𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 , 𝑃𝑃𝑃𝑃890 [𝑚𝑚𝑚𝑚3 /ℎ] ℃
𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑖𝑖𝑖𝑖 : Temperature inside the 𝑇𝑇𝑇𝑇𝑎𝑎𝑎𝑎 enclosure in ℃
𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖 [𝑊𝑊𝑊𝑊]
𝑃𝑃𝑃𝑃
𝑇𝑇𝑇𝑇𝑎𝑎𝑎𝑎𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑖𝑖𝑖𝑖
𝑇𝑇𝑇𝑇𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑖𝑖𝑖𝑖 𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠
𝑇𝑇𝑇𝑇
, 𝑃𝑃𝑃𝑃 : Ambient temperature in ℃
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑃𝑃𝑃𝑃𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠 , 𝑃𝑃𝑃𝑃
𝑇𝑇𝑇𝑇
𝑉𝑉𝑉𝑉𝑎𝑎𝑎𝑎𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑘𝑘𝑘𝑘
𝑇𝑇𝑇𝑇
𝑉𝑉𝑉𝑉𝑎𝑎𝑎𝑎𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑚𝑚𝑚𝑚
𝑉𝑉𝑉𝑉
𝑘𝑘𝑘𝑘𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 : Minimum flow rate [𝑚𝑚𝑚𝑚3 /ℎ]
𝑉𝑉𝑉𝑉
𝑘𝑘𝑘𝑘𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 𝑃𝑃𝑃𝑃𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 , 𝑃𝑃𝑃𝑃890
𝑘𝑘𝑘𝑘
[𝑚𝑚𝑚𝑚33 /ℎ] [𝑊𝑊𝑊𝑊]
𝑘𝑘𝑘𝑘
𝑃𝑃𝑃𝑃
[𝑚𝑚𝑚𝑚3 /ℎ]
[𝑊𝑊𝑊𝑊]33/ℎ]
[𝑚𝑚𝑚𝑚 𝑒𝑒𝑒𝑒𝑚𝑚𝑚𝑚𝑒𝑒𝑒𝑒𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒𝑒 890 ℃ , 𝑃𝑃𝑃𝑃
: Factor for altitudes above sea level
[𝑚𝑚𝑚𝑚
[𝑊𝑊𝑊𝑊] /ℎ]
[𝑊𝑊𝑊𝑊]
℃
[𝑊𝑊𝑊𝑊]
℃ 𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑖𝑖𝑖𝑖
℃
℃
Table-1: Factor k for altitudes above sea level 𝑇𝑇𝑇𝑇𝑎𝑎𝑎𝑎
Height (m) 𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑖𝑖𝑖𝑖 0 500 1000 1500
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 2000 2500 3000

k 1.00 0.95 0.89 0.84 0.80 0.75 0.71

𝑇𝑇𝑇𝑇𝑎𝑎𝑎𝑎 𝑘𝑘𝑘𝑘
[𝑚𝑚𝑚𝑚3 /ℎ]
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚
200 [𝑊𝑊𝑊𝑊]
𝑘𝑘𝑘𝑘 ℃
From calculated airflow rate to fan airflow rate selection

It is essential to take care how to select the correct fan. In general fans are usually described by two different properties. The first-
one is its performance in case of free air flow, and the second-one is given in case of working against a load, for example, a grille or
a filter. This second value, which is the lower one, shall be used to select the correct fan.
Aşağıda Grafik-1’de
Aşağıda Grafik-1’de
yaklaşık yaklaşık
540 m3/h 540
anmam3/h debisine
anma debisine
sahip örnek
sahipbirörnek
fana bir
ait fana
performans
ait performans
grafiği verilmiştir.
grafiği verilmiştir.
Grafik-2’de
Grafik-2’de
ise yinecurve
Performance örnek
ise of
yine
aolarak
örnek
sample filtre
fanolarak
kullanımı
filtre kullanımı
ve cihaz yerleşimlerine
ve cihazPerformance
yerleşimlerine
görecurve
fanof
göre
performansında
samefan performansında
sample meydana
fan intersect withmeydana
gelen
two gelen
different impedance curve showing actual airflow at two
değişimleri
değişimleri
göstermektedir.
göstermektedir. different working conditions
Static Pressure

Static Pressure
(Pascals)

(Pascals)

Graph 1 Airflow (CFM) Graph 2 Airflow (CFM)

Durum Durum
AçıklamaAçıklama Qv - Fan Qv
Akış- Fan
Debisi
Akış
(mDebisi
3
/h) (m3/h)
1 Sadece
1 fan
Sadece
çalışıyor.
fan çalışıyor.
HerhangiHerhangi
bir engel,bir
direnç
engel,
sözdirenç
konusu
sözdeğil.
konusu değil. 540 540
Care must be taken that there is no horizontal partition or other obstruction in the assembly or a section445
2 Pano
2 içerisine
Pano içerisine
cihazlar yerleştirildikten
cihazlar yerleştirildikten
sonraki durum
sonraki durum 445 of an assembly that restricts
3 Filtreler
3 takıldıktan
Filtreler takıldıktan
sonraki durum
sonraki durum 180 180
the air flow. To avoid hot spots, adequate air circulation of the active components must be ensured in the assembly.

Sample performance
Yukarıdaki curve
Yukarıdaki
örnekteki of a imaginary
örnekteki
değerlerden fananlaşılacağı
değerlerden
de withde
filter;
anlaşılacağı
üzere panoda
üzere panoda
kullanılmak
kullanılmak
üzere seçilecek
üzere seçilecek
fanların fanların
sadece katalog
sadece katalog
değeri üzerinden
değeri üzerinden
hesaplama
hesaplama
yapmakyapmak
uygun değildir.
uygun değildir.
Katalog Katalog
değerinden
değerinden
seçilecekseçilecek
Pointolan
1 - Sample
fanın
olan540
tüm m3/h
fanın
bu rated
bu fan
dirençler
tüm hasönüne
a performance
dirençler
göz gözalınarak curve
önüne alınarakthat intersect
akış debisinin
akış withörneğin
debisinin
örneğin horizontal
%30 değeri
%30airflow axehesaplara
hesaplara
değeri at 540 m3/h where static
pressure is zero, which means air is flowing without resistance.
katılmalıdır.
katılmalıdır.
Bu durumda
Bu durumda
katalog katalog
değeri 540
değeri
m3/h540olan
m3/h
bir olan
fan için
bir akış
fan için
debisi
akıştüm
debisi
bu dirençler
tüm bu dirençler
öngörülerek
öngörülerek
180 m3/h180
olarak
m3/hhesaba
olarak katılmalıdır.
hesaba katılmalıdır.
Point 2 - This fan is placed in a fan unit and mounted on top of a fully equipped assembly; which means air is flowing with resistance
at 445 m3/h

Point 3 - After 6 months the airflow rate of this fan unit with filter (if it’s filter mat is not kept clean) is reduced to 180 m3/h

Case Status Fan Flow Rate (m3/h)

Only fan is operating. There is no obstacle or resistance.
The situation after devices are placed in the enclosure
Situation after filters are installed

Use of forced ventilation requires maintenance to ensure consistent performance during the whole life of the assembly. Fan with
filter units are ideal for dissipating heat loads cost effectively. The prerequisite is that the ambient air must be relatively clean.
Otherwise, filters are filled with contamination very quickly. Filter mats must be cleaned and/or replaced regularly.

Measured cooling capacities

Table-2: Measured fan cooling capacities

EG FM Roof Top Fan-with D3 Door

EG FM Roof Top Fan-with D1 Door

201
 Installation considerations
Installation considerations
Push Design
Push Design with Dual Exhaust Pull Design Push / Pull Design Roof Mount Design

Warm air Warm air Warm air Warm air Warm air Warm air Warm air
out the out the out the out the out with out through out through
exhaust exhaust exhaust filter fan filter fan roof-mount roof-mount
grille grille grille filter fan filter fan

Cool air in Cool air in Cool air in Cool air in Cool air in Cool air in
through through through through through through
filter fan filter fan grille filter fan grille grille

A typical application. An extra exhaust grille Pull design is less Push/pull is used Roof mount filter
Pressurizes cabinet to Designers of assemblies using
is added to improve desirableforced
because ventilationtoneed toairrecognize
increase flow there canspace
fans save be ‘grey areas’ within
help keep out dust. air flow and cooling. dust can be sucked through more tightly inside the cabinet.
the assembly where the airflow is adversely
inside the cabinet. affected by the
packed cabinets. forced cooling. The installation of
temperature-critical devices within these spaces shall be avoided (see Figure F.3a)).
The
Filter place
fans of installation
are typically andinstalled
the direction of the
using air flow,Design”
a “Push e.g., pushing air into or sucking air out of the
enclosure, can lead to different results. In case of installing the fan at the top of the enclosure, to
blow air out (see Figure F.3 b)), because
Designers of assemblies usingthe enclosures
forced ventilationare usually
need not completely
to recognize there can be ‘grey areas’ within the assembly where the airflow
air-tight
is adversely affected by the forced gaps,
cooling. orinstallation
The some small holes can
of temperature-critical devices within these spaces shall be avoided (see
modify the air-forced circulation. This effect
Figure 1a)). The place of installation and the direction of the air flow, e.g., pushing air into or sucking air out of the enclosure, can
may
lead to different results. In case of reduce
installingthe
the cooling intop
fan at the some areas of
of the
enclosure, to blow air out (see the enclosure
Figure (see Figure
1b)), because F.3 b)).are
the enclosures
usually not completely air-tightAnother
gaps, orknown consequence
some small is thatthe
holes can modify some
air-forced circulation. This effect may reduce the cooling in some areas the
polluted (unfiltered) air is drawn into of
the enclosure (see Figure 1b)).enclosure
Another known through these gaps.
consequence Based
is that someon
those
polluted (unfiltered) air is drawn intofacts, the pushed-in
the enclosure throughair flow
these design
gaps.
with the fan placed at the bottom of the
Based on those facts, the pushed-in air flow design with the fan placed at
enclosure is the preferable solution in
the bottom of the enclosure is the preferable solution in many cases (See
many cases (See Figure F.3 c)).
Figure 1c).
Fan airflow calculation example
Fan airflow calculation example
Total effective power loss (P) Total effective power loss (P) : 1161 [W]
: 1161 [W]
Enclosure dimensions (HxWxD) : 2000x800x500
Enclosure dimensions mm (HxWxD) : 2000x800x500 mm
Type of installation of enclosure : Separate enclosure, detached on all sides
Tint : 45 °C ; Ta : 25 °C ; P890 : Type of (From
264 [W] installation ofAltitude
Table-3); enclosure
: 100: Separate
[m] enclosure, detached on all sides

Table-3: Power dissipated by separate : 45 °C ;detached

Tint enclosure, Ta : 25on
°Call sides
; P890
(Ta =: 25°)
264 [W] (From Table-1); Altitude : 100 [m]
separate enclosure Target temperature
detached on all sides

Calculation of minimum flowCalculation

rate of the fan:
of minimum flow rate of the fan:
𝑃𝑃𝑃𝑃−𝑃𝑃𝑃𝑃890 1161−264
𝑉𝑉𝑉𝑉𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 = 3,1 ∙ = 3,1 ∙ = 139,035 [𝑚𝑚𝑚𝑚3 /ℎ]
𝑘𝑘𝑘𝑘 ∙�𝑇𝑇𝑇𝑇𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖𝑖,𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚𝑚 −𝑇𝑇𝑇𝑇𝑚𝑚𝑚𝑚 � 1 ∙(45−25)

Important Note

Integral cooling fans of equipment like motor drives, power supplies, etc. posi�oned inside an assem
help achieve homogeneous temperature distribu�on. They have limited effect on heat removal from
assembly. In such cases addi�onal measures (like roof top fan and filter unit) to prevent excessive
temperature-rise shall be considered.

202
E-Kabin products cooling power values

Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W)

H (mm) W (mm) D (mm) 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K

1800 300 400 73 105 138 173 210 248 63 91 120 150 182 215 60 86 114 142 172 204 54 77 102 128 155 183 51 73 96 120 146 172 46 66 87 110 133 157
1800 300 500 92 132 174 219 265 313 85 121 160 201 243 287 78 112 148 185 224 265 68 97 129 161 195 231 63 90 118 148 180 212 56 80 106 133 161 191
1800 300 600 106 151 199 250 303 357 104 149 197 247 299 354 93 133 176 221 268 316 87 124 164 206 250 295 74 106 140 176 213 252 68 98 129 162 196 231
1800 300 700 124 177 234 293 355 419 120 171 226 283 343 405 107 153 202 253 307 362 103 147 195 244 296 349 88 126 166 208 252 298 81 116 153 192 232 274
1800 300 800 143 205 271 340 411 486 137 196 259 324 393 464 120 172 227 285 346 408 114 163 216 270 328 387 100 143 189 237 287 339 95 136 179 225 272 322
1800 300 900 157 225 297 373 452 533 153 219 289 363 440 519 135 193 255 320 387 457 131 187 247 310 375 443 112 160 211 265 321 379 108 154 203 255 309 365
1800 300 1000 165 236 312 391 474 560 165 236 311 390 473 558 151 216 285 358 434 512 146 209 276 346 419 495 118 169 223 280 339 400 114 166 217 273 332 390
1800 400 400 94 135 178 223 270 319 83 119 158 198 239 283 82 118 155 195 236 278 70 100 132 166 201 238 69 99 130 164 198 234 61 87 114 144 174 205
1800 400 500 107 153 202 254 308 363 106 151 199 250 303 357 100 143 189 237 287 339 90 128 169 212 257 303 85 122 161 202 245 289 73 104 138 173 209 247
1800 400 600 129 184 243 304 369 435 120 172 227 285 345 407 111 159 210 263 319 377 108 154 203 255 309 364 98 141 186 233 283 334 90 129 171 214 259 306
1800 400 700 149 213 281 352 427 504 139 199 263 330 400 472 129 185 244 306 371 438 119 170 225 282 342 404 112 160 211 265 321 379 104 149 196 246 298 352
1800 400 800 164 234 309 387 469 554 158 226 298 374 453 535 145 208 274 344 416 492 138 197 260 327 396 467 120 171 226 283 343 405 115 162 213 263 332 390
1800 400 900 171 245 324 406 492 581 171 244 322 404 489 578 160 229 302 379 459 542 156 223 294 368 446 527 135 194 255 320 388 458 128 183 241 302 366 433
1800 400 1000 185 264 349 438 530 626 182 260 343 431 522 616 171 244 322 404 490 578 168 241 318 398 483 570 148 212 280 351 425 502 143 205 270 339 410 485
1800 500 400 107 153 202 254 308 363 102 145 192 241 292 344 104 149 196 246 298 352 90 128 169 212 257 303 91 131 173 217 262 310 77 110 146 183 221 261
1800 500 500 131 187 247 309 375 443 118 168 222 279 337 398 116 165 218 274 332 392 109 157 207 259 314 371 108 154 203 255 309 365 95 136 179 224 272 321
1800 500 600 152 217 287 360 436 514 139 199 263 330 399 471 134 192 254 318 386 455 121 173 229 287 348 411 117 167 220 276 335 395 111 158 209 262 318 375
1800 500 700 165 237 312 392 475 560 160 229 302 379 459 542 154 220 290 364 441 521 142 202 267 335 406 480 133 190 251 314 381 450 125 178 235 295 358 422
1800 500 800 176 252 333 418 506 597 174 249 328 412 499 589 165 236 311 391 473 559 160 229 302 379 460 543 147 210 277 348 421 497 137 196 259 325 394 465
1800 500 900 191 273 360 452 547 646 186 266 351 440 533 629 175 250 330 415 502 593 174 248 328 411 498 588 163 233 308 386 468 552 153 219 289 363 439 519
1800 500 1000 207 296 390 490 593 700 201 287 379 476 576 680 187 267 353 442 536 633 185 264 348 437 529 625 173 247 326 410 496 586 170 242 320 401 486 574
1800 600 400 129 184 243 304 369 435 113 162 213 268 324 383 118 169 223 280 339 401 108 154 203 255 309 364 110 158 209 262 317 374 96 138 182 228 276 326
1800 600 500 152 217 287 360 436 514 136 195 257 322 390 461 138 197 260 326 394 466 121 173 229 287 348 411 123 176 232 292 353 417 115 164 217 272 330 389
1800 600 600 166 238 314 393 476 563 159 228 301 378 457 540 158 226 298 374 453 534 143 205 270 339 410 484 140 200 263 330 400 473 127 181 239 300 364 430
1800 600 700 179 256 338 424 513 606 176 251 331 416 504 595 172 246 325 408 494 583 164 234 309 387 469 554 157 224 296 372 450 532 145 207 273 343 415 490
1800 600 800 194 277 366 459 557 657 187 267 353 443 536 633 181 259 341 428 519 613 178 255 336 422 511 603 170 243 321 403 488 576 160 229 303 380 460 543
1800 600 900 212 303 399 501 607 717 203 291 384 481 583 688 193 276 364 457 554 654 188 269 355 446 540 637 183 262 346 434 526 621 173 248 328 418 510 600
1800 600 1000 230 329 434 545 660 779 220 315 415 521 631 745 208 297 392 492 596 704 202 289 382 479 580 685 189 270 356 447 542 640 181 260 343 437 534 628
1800 700 400 149 213 281 352 427 504 130 186 246 309 374 442 138 198 261 327 396 468 119 170 225 282 342 404 128 183 241 302 366 432 116 165 218 274 332 392
1800 700 500 165 237 312 392 475 560 156 223 294 369 447 528 158 226 298 374 453 534 142 202 267 335 406 480 145 207 274 343 416 491 128 183 241 302 366 432
1800 700 600 179 256 338 424 513 606 173 247 326 409 496 586 174 249 329 413 500 590 164 234 309 387 469 554 164 234 309 387 469 554 148 211 279 350 424 500
1800 700 700 195 279 369 463 560 662 186 266 351 441 534 630 183 262 345 433 525 619 181 258 340 427 517 610 179 257 339 425 515 608 166 237 313 393 476 562
1800 700 800 213 305 403 505 612 723 203 290 383 480 581 687 197 282 372 466 565 667 190 272 359 450 545 644 185 264 348 437 530 625 179 258 340 427 510 605
1800 700 900 232 331 437 549 665 785 220 314 415 520 630 744 212 304 401 503 610 720 205 293 386 484 587 693 195 279 368 461 559 660 184 263 347 435 527 622
1800 700 1000 244 349 461 579 701 828 242 346 456 572 693 819 229 327 432 541 656 774 219 313 413 519 628 742 207 297 391 491 595 702 205 293 387 485 588 694
1800 800 400 164 234 309 387 469 554 148 211 279 350 424 500 155 222 293 368 445 526 138 197 260 327 396 467 148 211 279 350 424 500 126 180 238 298 362 427
1800 800 500 176 252 333 418 506 597 168 240 317 398 482 569 171 244 322 405 490 579 160 229 302 379 460 543 165 235 311 390 472 557 148 212 279 350 424 501
1800 800 600 194 277 366 459 557 657 183 262 346 434 526 621 184 263 347 435 527 622 176 250 330 415 505 600 179 256 338 425 514 607 168 240 317 398 482 569
1800 800 700 213 305 403 505 612 723 200 286 378 474 574 678 201 287 379 475 575 679 190 272 359 450 545 644 192 274 362 455 550 649 187 267 353 442 536 633
1800 800 800 233 333 440 552 669 789 219 313 413 518 628 741 216 309 408 512 621 733 206 294 388 487 590 697 200 286 378 474 574 678 196 280 369 463 562 663
1800 800 900 246 352 464 582 706 833 241 345 456 572 692 817 233 334 441 553 670 791 221 316 417 523 634 748 214 307 405 508 615 726 209 298 394 494 599 707
1800 800 1000 261 373 492 617 748 883 255 365 482 604 732 864 249 355 469 589 713 842 237 339 447 561 679 802 227 324 428 537 651 768 220 315 416 522 632 746
1800 1000 400 185 264 349 438 530 626 174 248 328 411 498 588 179 255 337 423 512 605 168 241 318 398 483 570 175 250 330 414 501 592 165 235 311 390 472 557
1800 1000 500 207 296 390 490 593 700 190 272 359 451 546 644 197 282 372 467 566 668 185 264 348 437 529 625 190 272 359 451 546 644 183 262 346 434 526 621
1800 1000 600 230 329 434 545 660 779 210 300 397 497 603 711 218 311 411 515 624 737 202 289 382 479 580 685 206 294 388 487 590 696 200 285 377 472 572 676
1800 1000 700 244 349 461 579 701 828 233 333 439 551 667 788 238 340 448 563 681 805 219 313 413 519 628 742 222 317 419 525 637 752 211 302 399 501 607 716
1800 1000 800 261 373 492 617 748 883 251 359 474 594 720 850 254 363 479 600 727 859 237 339 447 561 679 802 238 341 450 564 684 807 225 322 425 534 646 763
1800 1000 900 277 396 522 655 794 937 265 379 500 627 760 897 265 379 500 628 760 898 256 366 483 605 733 866 256 367 484 606 735 867 240 343 452 567 687 812
1800 1000 1000 292 418 552 693 839 990 280 401 529 664 804 949 278 397 524 657 796 940 267 382 504 633 766 905 262 375 494 620 751 887 255 364 481 603 731 863
1800 1200 400 216 309 407 511 619 731 193 276 365 457 554 654 207 296 391 491 594 702 189 270 356 446 541 639 202 289 381 478 579 684 177 254 335 420 509 601
1800 1200 500 237 339 447 561 679 802 216 309 408 512 620 732 233 333 439 551 668 788 210 300 396 497 602 711 221 316 417 524 634 749 207 296 391 491 595 702
1800 1200 600 254 363 479 601 728 859 243 347 458 575 696 822 248 355 468 588 712 840 230 329 434 544 659 778 243 347 458 575 696 822 224 320 422 530 642 757
1800 1200 700 272 389 513 644 780 921 258 369 488 612 741 875 264 378 498 625 757 894 251 359 474 594 720 850 255 365 481 604 731 864 240 343 453 568 688 813
1800 1200 800 290 414 547 686 831 981 274 392 517 649 786 928 279 398 526 660 799 944 265 378 500 627 759 896 266 381 503 631 764 902 257 368 485 609 738 871
1800 1200 900 308 441 582 730 884 1044 291 416 549 688 834 984 294 420 555 696 843 995 278 398 526 659 799 943 279 399 526 660 800 944 273 391 516 647 784 926
1800 1200 1000 328 469 618 776 940 1110 308 440 581 729 883 1043 309 442 584 732 887 1047 292 418 552 692 838 990 295 420 553 695 841 993 286 409 539 677 820 968
2000 300 400 79 113 149 187 227 268 72 103 136 171 207 244 67 96 127 160 193 228 59 84 111 140 169 200 55 79 104 131 158 187 49 70 92 116 140 166
2000 300 500 97 139 183 230 279 329 94 134 177 222 269 318 85 122 161 202 244 288 78 112 148 185 225 265 69 98 130 163 197 232 62 89 117 147 178 210
2000 300 600 116 167 220 276 334 395 109 156 206 259 313 370 101 144 190 239 289 341 95 136 180 226 273 323 83 119 158 198 239 283 75 107 142 178 215 254
2000 300 700 137 196 258 324 393 464 129 185 244 306 371 438 115 165 218 273 331 391 109 155 205 257 312 368 97 139 183 229 278 328 90 129 171 214 259 306
2000 300 800 150 215 283 356 431 508 147 210 278 348 422 498 130 187 246 309 374 442 125 179 236 296 359 423 108 155 204 256 310 366 104 149 197 247 299 353
2000 300 900 158 226 299 375 454 536 157 224 296 371 450 531 146 209 276 346 419 494 141 202 266 334 405 478 118 169 222 279 338 399 116 166 219 275 333 393
2000 300 1000 172 246 324 407 493 582 170 243 321 403 488 576 158 227 299 375 454 536 156 223 294 369 446 527 131 187 247 310 376 444 127 181 239 300 364 430
2000 400 400 99 141 186 234 283 335 92 131 173 217 263 311 90 129 171 214 259 306 80 114 151 189 229 270 79 112 148 186 226 266 66 95 125 157 190 225
2000 400 500 120 172 227 284 345 407 109 155 205 257 311 368 105 150 198 248 301 355 99 142 187 234 284 335 94 134 177 221 268 317 84 121 159 200 242 286
2000 400 600 140 200 265 332 402 475 131 187 247 310 375 443 122 175 231 290 351 415 112 160 212 266 322 380 107 154 203 254 308 364 98 140 185 233 282 333
2000 400 700 155 222 293 367 445 525 150 215 284 356 431 509 140 200 264 331 401 474 131 187 246 309 374 442 117 167 221 277 336 396 115 164 217 272 329 389
2000 400 800 165 236 312 391 474 559 163 233 307 385 467 551 154 220 291 365 442 522 149 214 282 354 429 506 131 188 248 311 377 445 122 175 231 290 351 414
2000 400 900 181 259 342 429 519 613 176 251 331 416 504 595 164 234 309 388 470 555 162 233 308 386 469 553 146 209 276 346 419 495 139 199 263 330 399 471
2000 400 1000 196 280 370 464 562 663 191 273 360 452 548 647 175 251 331 415 503 594 174 249 328 412 499 589 160 228 302 378 458 541 154 221 291 366 443 523
2000 500 400 120 172 227 284 345 407 107 152 201 252 306 361 107 153 202 253 307 362 99 142 187 234 284 335 102 145 192 241 292 344 88 125 165 207 251 296
2000 500 500 142 203 267 335 406 480 129 185 244 307 371 438 127 182 240 302 365 431 113 162 214 269 325 384 112 160 211 264 320 378 104 149 196 246 299 353
2000 500 600 157 225 297 372 451 532 151 216 285 358 433 512 147 211 278 349 422 499 134 191 252 316 383 452 128 183 241 303 367 433 118 169 223 280 339 400
2000 500 700 170 243 321 403 488 576 165 236 312 391 474 560 163 232 307 385 466 550 155 221 292 366 443 524 143 204 270 338 410 484 133 190 251 315 382 450
2000 500 800 185 264 349 438 531 626 179 256 337 423 513 605 170 244 321 403 488 577 166 238 315 396 485 563 159 227 300 376 470 538 149 212 280 352 426 503
2000 500 900 202 289 381 478 579 684 194 278 367 460 558 658 182 261 344 432 523 617 178 255 336 422 511 604 173 247 326 409 495 584 166 237 313 392 475 561
2000 500 1000 220 315 416 522 632 746 213 304 402 504 611 721 196 280 370 464 562 664 191 274 361 453 549 648 177 254 335 420 509 601 171 245 323 406 492 580
2000 600 400 141 202 267 335 406 479 126 180 237 298 361 426 130 186 245 308 373 440 113 162 214 268 325 384 119 171 225 283 343 404 108 154 203 255 308 364
2000 600 500 157 225 297 372 451 532 148 212 279 350 424 501 149 213 282 353 428 506 134 191 252 316 383 452 134 192 254 318 386 455 120 171 226 284 344 406
2000 600 600 172 245 324 406 492 581 166 238 314 394 477 563 163 234 308 387 469 553 156 223 295 370 448 529 152 218 287 360 437 515 138 197 260 326 394 466
2000 600 700 186 267 352 442 535 632 178 255 336 422 511 603 175 250 329 413 501 591 170 240 320 400 485 572 164 234 309 388 470 555 154 221 291 365 442 522
2000 600 800 205 294 388 487 589 696 195 279 369 462 560 661 187 268 353 443 537 634 181 259 341 428 519 613 175 251 331 415 503 593 173 247 326 409 495 585
2000 600 900 224 320 422 530 642 758 214 306 404 507 614 725 202 289 382 479 580 685 195 279 368 461 559 660 185 264 349 437 530 626 177 254 335 426 518 608
2000 600 1000 237 339 448 562 681 804 233 334 441 553 670 791 219 313 413 519 628 742 210 300 396 497 602 711 196 281 371 465 563 665 195 279 368 462 559 660
2000 700 400 155 222 293 367 445 525 142 203 269 337 408 482 148 212 279 350 424 501 131 187 246 309 374 442 139 198 262 328 397 469 119 171 225 283 342 404
2000 700 500 170 243 321 403 488 576 159 228 301 377 457 540 163 233 308 386 468 553 155 221 292 366 443 524 156 223 294 369 446 527 140 200 264 331 402 474
2000 700 600 186 267 352 442 535 632 176 252 332 417 505 596 177 253 333 418 507 598 166 237 315 390 470 565 170 244 322 404 489 577 158 226 299 375 454 536
2000 700 700 207 295 390 489 592 700 194 277 366 459 556 657 190 272 360 451 546 645 184 263 346 434 525 619 183 261 344 431 522 616 176 251 331 416 503 594
2000 700 800 226 323 426 535 648 765 214 306 404 507 614 724 207 296 391 491 595 702 197 282 372 467 566 668 191 274 361 453 549 648 190 272 359 451 546 645
2000 700 900 240 343 453 568 688 813 234 335 442 555 672 794 225 322 425 533 646 763 213 304 402 504 611 721 204 291 385 483 585 690 201 287 379 475 575 679
2000 700 1000 254 364 480 602 729 861 248 355 468 587 711 840 240 343 453 568 688 813 232 331 438 549 665 785 217 310 409 513 622 734 213 304 402 504 611 721
2000 800 400 165 236 312 391 474 559 155 222 293 368 446 526 161 231 304 382 463 546 149 214 282 354 429 506 155 222 293 368 446 526 139 198 262 328 397 469
2000 800 500 185 264 349 438 531 626 173 247 326 409 495 585 176 252 333 417 506 597 165 235 314 390 470 560 170 243 321 403 488 576 161 230 303 380 461 544
2000 800 600 205 294 388 487 589 696 191 273 360 451 547 645 192 274 362 454 550 650 181 259 341 428 519 613 182 260 343 431 521 616 177 253 333 418 507 598
2000 800 700 226 323 426 535 648 765 210 300 396 497 602 711 210 300 396 497 603 711 197 282 372 467 566 668 198 282 373 467 566 668 191 273 360 452 547 646
2000 800 800 241 345 455 571 691 816 234 334 441 554 671 792 230 329 434 544 659 779 214 307 405 508 615 726 210 300 396 497 602 711 204 292 385 483 585 691

203
 Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W)

H (mm) W (mm) D (mm) 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K

2000 800 900 256 366 483 606 734 866 248 354 467 586 710 839 243 348 460 577 698 825 234 335 442 554 671 792 224 321 423 531 643 760 217 310 409 514 622 735
2000 800 1000 272 389 514 644 781 922 265 379 500 627 760 897 257 367 484 607 736 869 251 359 474 595 721 851 243 347 458 574 696 821 231 331 437 548 664 784
2000 1000 400 196 280 370 464 562 663 178 254 335 421 510 602 188 269 355 446 540 638 174 249 328 412 499 589 182 260 343 431 522 616 172 247 325 408 494 584
2000 1000 500 220 315 416 522 632 746 200 285 377 472 572 676 209 299 395 495 600 708 191 274 361 453 549 648 200 285 377 472 572 676 187 268 354 444 538 635
2000 1000 600 237 339 448 562 681 804 223 319 421 528 640 755 229 328 433 543 658 776 210 300 396 497 602 711 217 310 410 514 622 735 204 292 385 483 585 691
2000 1000 700 254 364 480 602 729 861 243 347 458 575 696 822 245 351 463 581 704 831 232 331 438 549 665 785 235 337 444 557 675 797 221 316 417 523 633 747
2000 1000 800 272 389 514 644 781 922 259 371 490 614 744 879 260 372 492 617 747 882 251 359 474 595 721 851 252 360 476 598 725 854 237 339 448 562 681 804
2000 1000 900 291 416 549 688 834 985 276 395 522 655 793 936 277 397 524 657 796 939 264 378 499 626 758 895 265 379 500 627 759 896 255 364 481 603 730 862
2000 1000 1000 312 446 589 739 895 1057 295 422 557 699 847 1000 292 418 552 692 839 990 278 398 525 659 798 942 273 390 515 646 782 924 269 385 508 637 771 911
2000 1200 400 225 321 424 532 644 761 203 290 383 480 581 687 220 315 416 521 632 746 196 281 371 465 563 665 214 306 404 507 614 724 194 278 367 460 557 658
2000 1200 500 245 351 463 581 704 831 231 330 436 547 663 782 239 341 450 565 684 808 220 314 414 520 630 744 234 335 442 555 672 793 215 308 406 510 618 729
2000 1200 600 265 379 500 627 760 897 248 355 469 588 713 842 258 368 486 610 739 872 245 350 462 580 702 829 248 355 469 588 713 842 235 336 444 557 675 796
2000 1200 700 285 407 538 674 817 965 269 384 507 637 771 910 274 392 518 649 787 929 260 372 491 616 746 881 265 379 500 627 759 897 256 366 483 605 733 866
2000 1200 800 308 441 582 730 884 1044 288 411 543 681 825 974 294 420 554 695 842 994 275 394 520 652 790 933 279 398 526 660 799 944 270 387 510 640 775 915
2000 1200 900 331 474 625 784 950 1122 307 439 580 727 881 1040 312 446 589 739 895 1057 291 417 550 690 835 986 292 418 552 692 839 990 283 405 534 670 812 959
2000 1200 1000 355 508 670 841 1019 1203 328 469 619 776 940 1110 330 472 623 782 947 1118 307 439 580 727 881 1040 309 439 581 729 883 1044 296 423 558 700 848 1001
2200 300 400 86 122 162 203 246 290 77 110 146 183 221 261 73 104 137 172 209 247 64 92 121 152 185 218 59 84 111 140 169 200 53 75 99 125 151 178
2200 300 500 104 149 196 246 298 352 96 138 182 228 276 326 92 132 174 218 264 312 84 120 158 198 240 284 76 108 143 179 217 257 66 94 125 156 189 223
2200 300 600 125 179 237 297 360 425 118 168 222 279 338 399 106 152 201 252 305 360 101 144 190 239 289 342 91 130 171 214 260 307 83 119 157 197 239 282
2200 300 700 144 206 272 341 413 487 139 198 262 328 398 470 123 176 233 292 354 417 117 168 221 278 336 397 103 147 194 244 295 349 98 140 185 232 281 332
2200 300 800 153 218 288 362 438 517 152 217 287 360 436 515 140 201 265 332 402 475 135 193 254 319 387 456 115 164 217 272 330 389 111 159 210 263 319 377
2200 300 900 165 236 312 391 473 559 164 234 309 388 470 554 152 218 288 361 437 516 150 214 283 355 430 507 128 183 241 303 367 433 123 176 233 292 354 418
2200 300 1000 180 257 339 425 515 609 178 255 336 422 511 603 160 228 302 378 458 541 160 225 298 373 451 533 142 202 267 335 406 479 137 196 258 324 392 463
2200 400 400 106 152 201 252 305 360 97 138 183 229 278 328 95 136 180 226 274 323 86 123 162 203 246 290 84 121 159 200 242 286 73 104 138 173 209 247
2200 400 500 130 186 245 308 373 440 119 170 224 281 340 402 114 163 215 269 326 385 104 149 197 247 299 353 101 144 191 239 290 342 90 129 171 214 260 306
2200 400 600 148 212 279 351 425 501 142 203 267 336 406 480 132 189 250 313 379 448 122 175 231 289 350 414 112 161 212 266 322 380 108 154 204 255 309 365
2200 400 700 157 224 296 371 450 531 156 223 295 370 448 529 147 210 278 348 422 498 141 202 267 335 405 479 127 182 241 302 366 432 117 168 221 277 336 397
2200 400 800 173 247 326 409 496 585 168 240 317 397 481 568 157 225 297 372 451 533 156 222 294 368 446 527 142 204 269 337 409 483 134 192 253 317 384 454
2200 400 900 189 270 356 447 541 639 183 262 345 433 525 619 170 243 320 402 487 575 167 238 315 395 478 565 154 220 290 364 441 521 149 212 280 352 426 503
2200 400 1000 208 297 392 492 596 704 201 287 379 475 575 679 182 260 343 430 521 615 179 256 338 424 514 607 165 236 312 391 473 559 164 235 310 389 471 556
2200 500 400 130 186 245 308 373 440 115 165 218 273 331 391 117 167 221 277 335 396 104 149 197 247 299 353 104 149 196 246 299 352 95 135 178 224 271 320
2200 500 500 149 213 281 352 426 504 141 201 265 333 403 476 138 198 261 328 397 469 124 177 234 293 355 420 122 174 230 289 350 413 112 160 211 264 320 378
2200 500 600 159 228 301 377 457 539 158 226 298 373 452 534 155 221 292 367 444 524 144 206 272 341 413 487 138 197 260 326 395 467 126 180 237 298 361 426
2200 500 700 176 252 333 417 505 597 169 242 319 400 485 573 167 239 317 397 480 567 159 228 301 377 457 540 152 218 287 361 437 516 142 202 267 335 406 479
2200 500 800 195 280 369 463 561 662 185 265 350 439 531 627 176 251 332 416 504 595 171 245 324 406 492 580 165 236 311 391 473 559 160 229 302 379 459 541
2200 500 900 213 304 401 504 610 720 205 293 387 486 588 695 191 273 360 451 547 646 185 264 348 437 530 625 178 255 334 421 515 605 172 246 324 407 493 582
2200 500 1000 226 323 426 535 648 765 223 319 420 527 639 754 207 296 390 490 593 701 199 285 376 472 572 675 183 261 345 433 524 619 176 252 335 418 501 595
2200 600 400 148 212 279 351 425 501 134 192 254 318 385 455 139 199 263 330 400 472 122 175 231 289 350 414 127 182 240 301 365 431 112 160 211 265 321 379
2200 600 500 159 228 301 377 457 539 154 221 291 366 443 523 155 222 293 367 445 526 144 206 272 341 413 487 146 209 276 346 419 494 129 185 244 307 371 438
2200 600 600 177 253 334 419 508 600 168 240 317 397 481 568 166 238 314 394 477 563 162 232 306 385 467 551 161 230 304 382 463 547 147 210 277 347 421 497
2200 600 700 198 283 374 469 568 671 185 265 350 439 532 628 180 257 340 426 516 610 174 248 328 411 498 588 167 239 316 396 480 567 165 236 311 390 473 558
2200 600 800 215 307 406 509 617 728 205 293 387 485 587 694 197 282 372 467 566 668 188 269 356 446 540 638 179 255 337 423 512 605 175 250 330 414 501 592
2200 600 900 230 329 434 545 660 779 225 322 425 533 646 762 214 306 404 507 614 725 203 291 384 481 583 688 192 274 362 454 550 649 187 268 354 444 538 635
2200 600 1000 245 351 463 581 703 830 239 343 452 567 687 811 228 326 430 539 653 771 221 316 417 523 633 747 204 292 386 484 586 692 199 285 376 472 572 675
2200 700 400 157 224 296 371 450 531 150 214 282 354 429 506 154 220 290 364 441 520 141 202 267 335 405 479 148 211 279 350 424 500 130 186 246 308 374 441
2200 700 500 176 252 333 417 505 597 165 236 311 390 473 558 167 239 316 396 479 566 159 228 301 377 457 540 162 231 305 383 463 547 150 214 282 354 429 506
2200 700 600 198 283 374 469 568 671 182 261 344 432 523 618 184 264 348 437 529 624 174 247 326 410 497 587 175 249 327 411 498 589 167 239 315 395 479 565
2200 700 700 216 309 408 512 620 732 203 290 383 481 583 688 201 287 379 476 576 681 189 270 357 448 542 640 184 264 348 437 529 624 181 259 341 428 519 612
2200 700 800 232 332 439 550 667 787 226 323 426 534 647 764 220 315 415 521 631 745 206 294 388 487 590 696 199 285 376 472 571 674 192 275 363 455 551 651
2200 700 900 248 355 468 587 711 840 240 344 454 569 689 814 232 332 438 550 666 786 224 321 423 531 643 759 213 305 403 506 612 723 205 293 387 485 588 694
2200 700 1000 265 379 501 628 761 898 256 367 484 607 736 868 246 351 464 582 704 832 241 344 454 570 690 815 230 329 434 544 659 778 221 316 417 523 634 748
2200 800 400 173 247 326 409 496 585 160 229 302 379 459 541 165 236 312 391 474 559 156 222 294 368 446 527 160 229 302 379 459 541 150 214 283 355 430 508
2200 800 500 195 280 369 463 561 662 178 255 336 422 511 603 183 261 345 433 524 619 171 245 324 406 492 580 173 248 327 411 497 587 167 239 315 396 479 566
2200 800 600 215 307 406 509 617 728 199 285 376 471 571 674 203 290 383 481 582 688 188 269 356 446 540 638 188 270 356 446 541 638 180 258 341 427 518 611
2200 800 700 232 332 439 550 667 787 221 315 416 522 633 747 222 318 420 526 638 753 206 294 388 487 590 696 206 295 389 487 590 697 194 278 367 460 557 658
2200 800 800 249 356 470 590 715 844 239 342 452 567 687 811 235 336 444 557 674 796 225 322 426 534 647 764 221 317 418 524 635 750 209 299 395 495 600 708
2200 800 900 267 382 504 632 766 904 256 366 483 606 734 867 249 356 470 590 714 844 242 346 457 574 695 820 236 337 445 558 676 799 226 324 428 536 650 767
2200 800 1000 285 408 539 676 818 966 273 390 515 647 783 925 265 379 501 628 761 898 258 368 486 610 739 872 247 353 466 584 708 835 243 348 459 576 697 824
2200 1000 400 208 297 392 492 596 704 184 263 347 436 528 623 198 283 373 469 568 670 179 256 338 424 514 607 189 271 357 448 543 641 176 251 331 416 504 595
2200 1000 500 226 323 426 535 648 765 210 300 396 497 602 711 220 314 415 520 630 744 199 285 376 472 572 675 210 300 396 497 602 711 193 276 364 457 553 653
2200 1000 600 245 351 463 581 703 830 232 332 438 549 665 785 235 336 444 557 675 797 221 316 417 523 633 747 228 327 431 541 655 773 211 301 397 499 604 713
2200 1000 700 265 379 501 628 761 898 250 358 472 592 718 847 252 360 475 596 722 853 241 344 454 570 690 815 242 346 457 573 694 820 231 330 436 546 662 782
2200 1000 800 285 408 539 676 818 966 268 384 506 635 769 908 270 386 510 639 774 914 258 368 486 610 739 872 258 369 488 610 740 874 251 359 474 594 720 850
2200 1000 900 307 439 579 727 881 1040 289 413 546 685 829 979 290 414 547 686 830 981 273 391 516 648 785 926 275 393 517 648 786 928 264 378 499 626 758 895
2200 1000 1000 333 476 628 788 954 1126 312 446 589 739 895 1057 307 439 580 727 881 1040 290 415 548 688 833 983 285 407 538 674 817 964 278 397 524 657 796 940
2200 1200 400 231 331 437 548 663 783 215 307 405 508 616 727 228 326 430 539 653 771 207 297 392 491 595 703 222 318 420 527 638 753 201 288 380 477 577 682
2200 1200 500 255 365 481 604 732 864 237 338 447 560 679 801 246 352 465 584 707 835 232 331 437 548 664 784 241 344 454 570 690 815 224 320 423 531 643 759
2200 1200 600 278 397 525 658 797 941 257 368 485 609 738 871 266 380 501 629 762 900 249 356 470 590 715 844 257 368 485 609 738 871 242 346 456 572 693 819
2200 1200 700 302 432 570 715 866 1023 278 398 525 659 799 943 288 412 544 682 826 975 269 385 508 637 772 911 273 391 516 647 784 926 264 378 499 626 758 895
2200 1200 800 327 467 616 773 937 1106 302 432 570 715 866 1022 308 440 581 729 883 1042 286 410 541 678 822 970 291 416 549 689 835 985 278 398 526 659 799 943
2200 1200 900 357 511 674 846 1024 1209 326 466 615 772 935 1104 332 474 626 785 951 1123 305 437 577 723 876 1035 308 440 581 729 883 1042 294 420 554 695 842 994
2200 1200 1000 387 554 731 917 1111 1312 350 501 661 829 1004 1186 354 506 668 838 1016 1199 324 463 611 766 928 1096 323 463 611 766 928 1096 308 440 581 728 882 1042

204
IP 55 E-Kabin E Series cooling power values

Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W)

H (mm) W (mm) D (mm) 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K

500 600 250 33 48 63 79 96 113 32 46 61 77 93 110 30 43 57 71 86 102 27 39 51 65 78 93
650 600 250 37 54 71 89 108 128 36 52 68 86 104 123 34 49 64 81 98 116 31 45 59 74 90 106
800 600 250 41 59 78 99 119 141 40 57 76 95 115 136 37 52 69 87 106 125 34 50 66 82 100 118
950 600 250 47 68 89 112 136 160 45 64 85 107 130 153 40 57 75 95 115 135 38 55 72 91 110 130
1100 600 250 50 71 94 118 143 169 48 69 91 114 139 164 45 65 86 108 131 155 42 61 80 101 122 145
1250 600 250 51 72 95 120 145 171 60 86 114 143 173 204 57 81 107 134 162 192 53 76 101 127 153 181
Single Door

800 800 250 54 77 102 129 156 184 53 77 101 127 154 182 51 73 96 121 147 173 46 66 87 110 133 157
950 800 250 64 91 121 152 184 217 60 86 113 142 172 204 53 76 101 127 153 181 52 75 99 124 150 177
1100 800 250 69 99 131 165 200 236 68 97 128 161 195 230 62 89 118 148 179 211 56 81 107 134 163 192
1250 800 250 72 103 135 170 206 243 69 99 131 164 198 234 64 92 122 153 185 218 75 107 141 177 214 252
1500 600 220 62 89 117 147 178 210 60 86 114 143 173 204 52 74 98 123 149 176 63 91 120 150 182 214
1500 800 220 89 127 167 210 254 300 83 119 156 196 238 281 75 107 141 177 214 253 88 125 165 207 251 297
1800 600 220 79 112 148 186 225 266 72 103 136 171 207 245 63 90 119 149 181 213 80 115 152 190 231 272
1800 800 220 101 145 191 240 291 343 97 139 183 230 279 329 90 128 169 212 257 304 113 161 213 267 323 382
2000 600 220 89 127 168 211 255 301 85 121 160 200 243 286 72 103 135 170 206 243 91 130 172 216 261 309
2000 800 220 112 161 212 266 322 381 108 155 204 256 310 367 98 140 184 231 280 331 125 178 235 295 357 422

IP 66 E-Kabin O Series cooling power values

Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W)

H (mm) W (mm) D (mm) 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K

300 200 150 10 14 18 22 27 32 9 13 17 21 25 30 8 11 15 19 23 27 7 10 13 17 20 24
300 300 200 15 21 28 35 42 50 14 20 26 32 39 46 13 18 24 30 36 43 11 16 21 26 31 37
400 300 150 14 20 26 33 40 47 13 18 24 30 37 44 12 17 22 28 34 41 10 15 20 25 31 37
400 300 200 16 23 30 38 46 54 14 21 28 35 42 50 14 19 25 32 39 46 12 17 22 28 34 41
400 400 200 19 28 37 47 57 67 18 26 35 44 53 63 17 24 32 41 50 59 15 21 28 36 43 51
500 350 150 18 25 34 42 51 61 17 24 32 40 48 58 16 22 30 37 45 53 14 20 27 34 41 49
500 350 200 22 32 42 52 63 75 21 29 39 49 59 69 19 27 36 45 54 64 17 24 32 40 49 58
500 400 200 22 32 42 53 64 76 21 30 40 50 60 72 20 28 37 46 56 66 17 25 33 41 50 59
500 500 200 26 38 50 63 77 91 25 36 48 60 73 86 24 34 45 56 68 81 21 30 40 50 61 72
600 400 150 22 32 42 53 64 76 21 30 40 50 61 73 20 28 37 47 57 67 18 26 35 43 53 62
600 400 200 25 36 48 60 73 86 23 34 44 56 68 80 22 31 41 52 63 74 20 28 37 47 57 68
600 400 300 31 44 58 73 89 105 28 41 54 67 82 97 26 37 49 61 75 88 23 33 43 55 66 78
600 500 300 36 51 68 85 104 122 33 48 63 79 96 114 31 44 59 74 89 105 27 39 52 65 79 93
600 600 200 34 49 65 82 99 117 33 47 62 78 94 112 31 44 59 74 89 106 28 40 53 67 81 95
600 600 250 38 54 72 90 109 129 36 51 68 85 103 122 33 48 64 80 97 114 30 43 56 71 86 102
700 500 200 33 47 62 78 95 112 31 44 59 74 89 105 29 41 55 69 84 99 26 38 50 63 77 91
700 500 300 39 56 75 94 114 134 37 52 69 87 106 125 34 48 64 80 97 115 30 43 57 72 87 103
800 600 200 41 59 78 98 119 141 39 56 74 93 113 133 37 53 70 88 107 126 34 49 65 81 99 116
800 600 250 45 65 85 107 130 154 42 61 80 101 122 145 40 57 75 95 115 136 36 52 69 86 105 123
800 600 300 51 73 96 121 146 173 47 68 90 112 136 161 42 61 81 101 123 145 38 55 73 91 110 131

IP 66 E-Kabin M Series cooling power values

Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W) Maximum Power Distribution (W)

H (mm) W (mm) D (mm) 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K 15 K 20 K 25 K 30 K 35 K 40 K

800 800 300
900 600 300 55 79 105 132 160 189 52 75 99 125 151 178 46 66 87 109 132 156 42 60 79 99 120 142
1000 600 300
1000 700 300 70 100 132 165 200 237 62 89 117 147 178 210 57 82 108 136 165 194 55 79 104 130 158 187
1000 800 300
1000 800 400
1200 600 300
1200 800 300 92 132 174 218 265 313 85 122 161 202 245 289 77 110 145 182 221 261 72 103 137 172 208 246
1200 800 400 112 160 211 265 321 379 103 148 195 245 297 350 90 128 170 213 258 305 80 115 151 190 230 272

205
Stainless Steel Electrical Enclosures

It is generally preferred that the electrical enclosures are

manufactured from stainless steel material in various industrial
applications where corrosion resistance is important. However,
there are rules to be considered when selecting and using
stainless steel materials.

Stainless Steel Enclosures

Stainless steel is a proven it’s reliability in various industrial
applications as electrical equipment enclosures. In the
corrosion resistance of the stainless steel, the environment and
its conditions of the application, the grade of steel and the
surface treatment have determinant importance.

When the characteristics of stainless steel enclosures are

determined for using in a project, by careful consideration
of the factors stated here, the required level of corrosion taking special precautions. In cold climate zones, chlorides
protection and the overall success of the application can be are used as defrosting chemicals and also, can cause point
possible. corrosion on 304 stainless steel surfaces.

Stainless steel self-repair feature In industrial environments, chlorides can be existing in smoke
and flying ashes. These are dirt and debris deposits on non-
Oxygen Passive Layer
washed, uncleaned surfaces and eventually they may cause
point corrosion. Even if the right stainless steel is chosen,
corrosive substances condensed in the accumulation of
impurities in that way, may cause the protective passive layer
on the stainless steel surface to be pierced. In such cases,
Stainless steel
cleaning is necessary. By this way, self-repairing of stainless
The metallic satin finish of the stainless steel makes steel material can be provided and the stainless steel surfaces
itself passive, if a suitable environment is provided, can be prevented from condensation of sulfur-dioxide, chloride
i.e. sufficient oxygen and available rich chromium
or ferrous deposits.
oxidation.

This reaction occurs spontaneously in very short time In another particular attention should be paid not only to the
once the sufficient oxygen contacts on the surface, general climatic conditions, but also to the specific micro-
and the protective layer thus formed becomes thick climatic conditions where the enclosure is to be mounted.
over time. The most obvious example to this, is the negative effect in
the settlement areas especially in highways, where salt and
The resistance against corrosion on the surface has the
chemicals are is used as de-icing, which can be carried up to
ability to repair itself in case of mechanical defection.
a distance by the vehicles. Likewise, the effects of increased
exhaust gas emission by the dense and stopped traffic on
Environment and its conditions; the underpass, in the tunnel or at the ticket office, can be
The climate of the area where the application will be, has a evaluated in terms of attracting attention to the micro-climatic
great effect on the corrosion resistance of the stainless steel conditions.
material.
Which grade of stainless steel?
For example, 304 grade stainless steel is resistant to corrosion 304 grade stainless steel is the most widely used type in
under a wide range of environment conditions and climate different applications where a special corrosion resistance
effects, but it is inevitable to experience corrosion in salt and is not required. More harsh environments require the use
other chloride environments. De facto, 304 grade stainless of 316 qualities which is more expensive grade of stainless
steel should not be used up to 10 km inside by the sea coast; steel. However, even for 316 grade stainless steel, chemicals,
but the actual length of this distance can be determined by their concentration and their level of aggressiveness in the
evaluating the climatic conditions according to the application environment must be examined, evaluated and observed in
area specifications. By this reason, it is not recommended to deep detail; because there may be cases where this grade is
use 304 grade stainless steel in marine applications without not sufficient.

206
304 Grade Stainless Steel
SEA 304-304L / EN 1.4301-1.4303
Classified as 304 grade by the American Society of
Automotive Engineers - SAE, stainless steel contains 18-20%
chromium and 8-10.5% nickel. The 304 grade sometimes
referred to as ‘18 -8 ‘, is widely used as standard stainless steel
grade in different industrial applications. The most common
application where the use of 304 quality stainless steel is
inconvenient, is the outdoor applications in the coastal areas
where the salt is deposited on the surfaces by flying.

In the food and beverage industry, it is necessary for the

enclosures to be washed frequently without worrying about
rusting. 304 grade stainless steel is used extensively here. Due
to its high resistance to various acids found in meat, milk, iodides which are not chlorides. Another important factor is
fruits and vegetables, 304 grade stainless steel has become the presence of water oxidizers (e.g. ozone); the risk of point
the ideal raw material for control and control equipment corrosion is also increasing as long as water oxidizing power
enclosures of machines used in food and beverage processes. increases. In such some cases, 316 grade stainless steel is also
Nevertheless, a stronger stainless steel grade may be required, insufficient.
if the environment has excessive chloride usage, or cleaning
procedures require high corrosion resistance solvents. 316 grade stainless steel commonly known as the marine
standard, cannot withstand to be presented in continuous
The use of 304 grade stainless steel may be sufficient in a saline water (equivalent to 19,000 ppm chlorine). However, it
majority of waste treatment and clean water treatment plants. can be used in overwater applications such as temporary and
However, in some clean water treatment plants, chlorine short-term salt spray applications. It should not be forgotten
gas is used as a disinfectant and sulfur dioxide is used to to take various precautions for the application areas with
remove the residues of used chlorine. When the nature of narrow and closed low airflow a difficult harsh environment
the environment with high humidity and the corrosive effect conditions with low pH or high temperature. 316 grade
of these gases are combined together, the capabilities of stainless steel is generally considered as an adequate enclosure
304 grade stainless steel are exceeded. Some municipalities for marine applications such as ships and oil platforms and
put efforts to use less chemicals with environment friendly even for salt mines. Essentially, the stainless steel grade is 316
approaches and apply ultraviolet treatment for water which should be used mainly in corrosive environments where
treatment. 304 quality stainless steel can be used, due to no high chloride levels are present.
chemical usage in such facilities.
316 grade stainless steel should be preferred because of
316 Grade Stainless Steel having high chloride resistance in food processing plants using
SEA 316-316L / EN 1.4401-1.4404 excessive acidic chemicals and concentrated chloride salts. 316
The second most widely used grade of stainless steel is 316 grade stainless steel having considerable degree of resistance
when the limits of 304 are reached. In general, 316 quality against sulfuric acid solutions (<10%) and sulfur-containing
stainless steel, which is 25-35% more expensive, has a higher gases, is used as the raw materials for the enclosures used in
nickel content and an additive molybdenum content of 2-3%. industries where they are frequently found. For example, 316
Molybdenum additive provides increase of corrosion resistance grade stainless steel is used in the paper industry. Similarly, in
especially against chlorides. other industries such as vulcanization process for the rubber or
gun powder manufacturing, it is also widely used.
The rate of chloride contained in water is the most
determinant factor in the selection of stainless steel enclosure Nitric and hydrochloric acid
material for water treatment plants. 304 grade stainless steel As a general rule, 316 grade stainless steel enclosures are
is able to withstand against the corrosive effect of water more resistant to aggressive chemical environments than
containing up to 100 ppm of chloride. On the contrary, in the 304 grade. Nitric acid is at the top of special cases which
316 grade stainless steel material, this limit is up to 1000 ppm does not suit this rule. Nitric acid is especially used in
of chloride. In addition to chlorides, there are other substances fertilizer production, pharmaceutical industry and explosive
that affect the corrosive behavior of the water. Especially, production; also, it can be used in synthetic yarn and polymer
attention should be paid to halides such as bromides or manufacturing or in water treatment plants.

207
 of chloride concentration in the contact zones considerably
increase the likelihood of corrosion.

It is necessary to pay special attention to the selection of

the right material in swimming pool applications. Especially,
attention should be paid to the selection of materials for
enclosures placed in closed areas such as machine rooms of
pools. Special precautions such as micro climate air quality,
should be taken in these applications. It is obvious that
the selection of 316 grade stainless steel will not sufficient
alone in the presence of oxidizing substances such as ozone
or where disinfectant chemicals are stored. In this case
application of lacquer coating or 316 quality stainless steel or
All stainless steel grades have a slight resistance to nitric acid, both is required.
but in industries where the use of nitric acid is widespread,
304 grade stainless steel should be preferred due to its high Surface treatment
resistance against this substance. In this case, the self-passive Grinding is common surface treatment for stainless steel
ability of the stainless steel is enhanced by the strong oxidizing enclosures used in industrial applications. The protective film
effect of nitric acid and the corrosion resistance of the stainless as the purpose of masking, adhered on the outer surfaces of
steel is increased. the enclosures is kept to the very last of the manufacturing
steps, after removing the film and the possible adhesive
It is important to consider that neither the 304 grade nor the residues are cleaned with special chemicals, the enclosure is
316 grade stainless steel will be able to withstand against packed with an air-permeable material before last packaging.
the chemical corrosion caused by hydrochloric acid. This acid
destroys the passive surface and leaves the metal vulnerable. In addition to the surface treatment quality, the direction of
grinding of the stainless steel surface is also important in terms
Swimming pool environments of corrosion resistance. The vertically oriented grinding allows
The swimming pool atmosphere is generally characterized cleaning to be done easily and in case of outdoor applications,
by at a relative humidity approximately 60-70% together rain water can flow down itself with help of gravity. Some
with chlorine and chlorine compounds relatively high levels. stainless steel enclosures can be painted. Especially, it is known
The original “pool smell” is existent due to these. These that outdoor stainless steel enclosures exposed to intense
substances can be spread to the entire space as both steam solar radiation can be 10 degrees cooler, if they are painted
and aerosol. In addition to sodium chloride, relatively high with a light color. It is also possible to consider the paint
amounts of calcium and magnesium chloride are found in as an additional layer of protection for extremely corrosive
many applications. Typical values are 2-5% for the chloride environments. Stainless steel can be painted by using standard
ratio and 3-4 for the pH value. The high relative humidity paint process.
rate fluctuates by depending on the intensity of swimming
activity, the temperature changes during the day and resulting Hygienic applications
in the accumulation of deposits at various locations with Stainless steel enclosures are also preferred for their superior
the switched off air conditioning system in the nights. The hygienic features in addition to their corrosion resistance.
evaporation of chloride-containing liquids and the increase It is more difficult to stick and reproduce for bacterias and
microbes on stainless steel surfaces (assuming to have
appropriate surface smoothness). The smooth and though
surface of the stainless steel allows for easier and more
effective cleaning.

Precautions for storage and construction site

environment
In order to ensure that the surface qualities of stainless
steel enclosures are also protected under storage and site
conditions, some precautions might be needed to be taken
in addition to the manufacturer’s precautions such as product
packaging.

208
Water which may accumulate during storage and transport, removed by gentle cleaning creams and polishing pastes
especially under heat shrinkage or under the plastic packaging which are available in the market. These cleaning products
of the stretch-film construction, may cause corrosion. This contain substances that can penetrate the surface together
is the case when the packaged product is left in a humid with calcium carbonate. Household cleaners are also based
environment for a long time. on lemon acid and suitable for cleaning. Grinding powders
containing iron adhering to the surface in a short time ago,
Strong acids (chloride based) which can be used for cleaning should be cleaned with saturated solutions of oxalic acids.
after ground work, especially stone or ceramic laying in new Firstly, it must be applied to the surface without pressing
buildings, should be prevented from getting in contact with hardly with a soft cotton cloth or cotton-based polishing pad
stainless steel surfaces. Any cleaning or rinsing fluid must not and waited for a few minutes. Thus, as a rule, it is ensured
be interacted with the surrounding metals. that the particles are separated from the surface without
scratches and damages on the surface. Moderate level
During storage, transfer, positioning and assembling in rust stains are cleaned using cleaning products containing
construction site environment, contamination of stainless steel phosphoric acid. Careful cleaning is done without damaging
enclosures’ surfaces with carbon steel or iron must be avoided. the surface and changing color. Alternatively, small amounts
For example, metal machining, grinding or welding around of iron particles treated on the surface are successfully cleaned
stainless steel enclosures should be avoided or precautions with slenderized nitric acid. It is only possible to clean the
should be taken. Carbon steel metal burrs or slag splashing on surface treated with rust thoroughly with acid processing and
the stainless steel surfaces will cause corrosion of splinters. / or passivation to be done professionally. The acid cleaning
process should be considered as a thin layer removal from
the surface. For this, a mixture of nitric acid and hydrofluoric
acid is generally used. Passivation process is a controlled and
accelerated reconstitution of the impaired passive layer on the
surface in the nitric acid environment. However, first of all, the
oil and organic soils on the surface must be cleaned.

Maintenance
For all stainless steel applications, periodic surface
maintenance should be planned and applied during operation.

Cleaning before delivery

304 and 316 grades raw material discrimination test:
The stainless steel electrical enclosures manufactured by EAE,
are delivered in an air-permeable package material, after the
protective film is stripped and the surface is cleaned with
flying chemicals which have protective features for stainless
steel. Before the final delivery against the contamination, it
is necessary to clean the surface defections which may be
occurred in the workshop environment or the construction site
environment.
304 316
Mortars and cement particles can be cleaned with 10-15% A fine liquid from Monil 304-316 separator solution
phosphoric acid. The solution should be applied hot onto is dropped on the surface (under room temperature).
20-25 minutes to be waited. The colour of drop is
the surface, subsequently, neutralized by the ammonia
watched. On the tested surface, in 5 minutes, yellow-
solution, finally rinsed with water purified from the minerals.
green-brown color changes in sequence as the proof
Cleaning products manufacturers offer some special products of 316 grade stainless steel. For 316L grade stainless
for this type of cleaning. The superficial light stains can be steel, more than 5 minutes to be waited.

209
Earthing

Introduction

Main function of an electrical enclosure is to ensure the safety of operator and equipment. Appropriate precautions must be taken
for the safety of personnel, property and electrical equipment located inside enclosures. Even careful design of switching systems and
expert planning cannot prevent unwanted short-circuits when operating electrical systems. These must therefore be equipped with
appropriate short circuit provisions. They must be able to conduct short-circuit currents without impairing safety.

Earthing connections are additional path for electrical current to return safely to the ground without danger to anyone in the event
of a short circuit. If a short circuit did occur, the current would flow through the earthing connection. Causing a fuse blow or a circuit
breaker trip is much preferable than the fatal shock that could result if the current was not grounded.

Regulations and Standards

The following standards should be considered regarding earthing:

• EN 62208:2011
Empty enclosures for low-voltage switchgear and control gear assemblies – General requirement

• EN 61439-1:2011
Low-voltage switchgear and control gear assemblies - Part 1: General rules

• EN 60204-1:2016
Safety of machinery - Electrical equipment of machines - Part 1: General requirements

Test method to verify earth continuity

It shall be verified that the different exposed conductive parts of the enclosure are effectively connected to the earthing terminal or
contact of the protective circuit and that the resistance of the circuit does not exceed 0,1 Ω.

Verification shall be made using a resistance measuring instrument or arrangement which is capable of driving a current of at least
10 A (a.c. or d.c.). The current is passed between each exposed conductive part and the earthing termination point. The voltage drop
between these points is measured. The resistance calculated from the current and this voltage drop shall not exceed 0,1 Ω.

Requirements for earth continuity providing protection against the consequences of faults
within the enclosure

EAE enclosures have been designed to ensure earth continuity protection against the consequences of faults within the enclosure, so
all exposed conductive parts are interconnected together and have low resistance to the earthing terminal. Thus, earthing terminal can
be bonded via an earthing conductor to the earthing arrangement of the system. These interconnections may be achieved either by
metal screwed connections, welding or other conductive connections or by a separate protective conductor.

For the continuity of these connections during operation or maintenance the following shall apply:

a) When a part of the enclosure is removed, for example for routine maintenance, the protective circuits (earth continuity) for the
remainder of the enclosure shall not be interrupted.

b) For lids, doors, cover plates and the like, the usual metal screwed connections and metal hinges are considered sufficient to ensure
continuity provided that no electrical equipment exceeding the limits of extra low voltage (ELV) (50 V AC or 120 V DC see: IEC 61140-
2016) is attached to them.

If apparatus with a voltage exceeding the limits of extra-low voltage are attached to lids, doors, or cover plates additional measures
shall be taken to ensure earth continuity, therefore EAE accessories shall be mounted as protective conductors. These parts shall be
fitted with a protective conductor (PE) whose cross-sectional area is in accordance with EN 61439-1:2011 Table 3 depending on the

210
highest rated operational current Ie of the apparatus attached, if the rated operational current of the attached apparatus is less than or
equal to 16 A or an equivalent electrical connection especially designed and verified for this purpose (sliding contact, hinges protected
against corrosion).
Exposed conductive parts of a device that cannot be connected to the protective circuit by the
fixing means of the device shall be connected separately to the protective terminal of the enclosure by a conductor whose cross-
sectional area is chosen according to EN 61439-1:2011 Table 3.

Current carrying capacity of the integrated contacting

The integrated contacting system of EAE enclosures ensure a conducting connection between all elements. The results of our tests
and measurements confirm that the connections possess a contact resistance of less than 0.1 Ω, as demanded in EN 62208:2011.

With regard to the inclusion of the door in the protection measures for “Protection in case of indirect contact” we recommend
connection of a separate earth conductor to the door, when an apparatus is attached on the door and the rated operational current
of the attached apparatus is higher than 16 A. The applicant must determine whether or not the integrated contacting is sufficient for
the earthing system. Attention is here drawn to the regulations and standards. EAE enclosure doors are supplied with 6 mm2 cross-
section earthing cable for attached apparatus rated current up to 63A.

EN 61439-1:2011 Tablo 3 - Cross-sectional area of a copper protective conductor ([Link].2)

Rated operational current, le Minimum cross-sectional area of a protective conductorı
A mm2

le ≤ 20 S
20 < le ≤ 25 2,5
25 < le ≤ 32 4
32 < le ≤ 63 6
63 < le 10

Integrated contacting
paint-masking
The integrated contacting system of EAE enclosures ensure a
contacting connection between all elements. All elements are
made of galvanized sheet steel even if they are painted for
esthetical reasons.

Conducting connection of painted elements is achieved,

by paint-masking of touching surfaces

by using earthing components
by self-tapping screws with earthing feature
by earthing washers and nuts

earthing component

211
 self-tapping screw
with earthing feature

earthing washer and nut

EAE enclosure’s doors are supplied with

6 mm2 cross-section earthing cable for
attached apparatus rated current up to
63A.

For additional earthing accessories

please refer to product brochures and
catalogues.

212
 SİSMİK ÖNLEMLER VE SİSMİK MONTAJ KURALLARI
Seismic Precautions and Seismic Assembly
SİSMİK ÖNLEMLERRules
VE SİSMİK MONTAJ KURALLARI
PanelMaster ürünleri ve bunların sismik uygulamaları IEC 60068-3-3 ve IEC 60890 standartlarına göre ulus
akredite laboratuvarlarda
PanelMaster
PanelMaster products ürünleri
and their test
seismic ve edilerek
bunların
applications havesismik
sismik
been dayanımları
uygulamaları
tested IEC kanıtlanmıştır.
60068-3-3
in internationally ve IECaccredited
recognized 60890 standartlarına
laboratories göre uluslara
according to IEC 60068-3-3
akredite and IEC 60980 standards,
laboratuvarlarda and their
test edilerek seismic
sismik resistance has
dayanımları been verified .
kanıtlanmıştır.

PanelMaster Floor Standing Type and Wall Mounted Type Panels

IEC 60068-3-3 (Zone 4) Class: 0, IEC 60980 (Zone 4), for Nuclear Plants

TS EN IEC 60068-3-3 : 2019-12 - Table 3

Seismic activity zone Zone 0 Zone 1 Zone 2 Zone 3 Zone 4

Ground acceleration, ag (m/s2) 0 1 2 3 5

Below is a table of equivalence between seismic classifications depending on the peak ground acceleration value.

TS EN IEC 60068-3-3 : 2019-12, Table-4

Peak Ground Acceleration (PGA) Modified Mercalli Index
Seismic Activity Zone Richter scale
(PGA) (m/s2) (MMI)

0.01 I 0-2
0.01 - 0.02 II 1-2
0
0.02 - 0.05 II 2-3
0.05 - 0.1 IV 3-4
0.1 - 0.2 V 4-5
1
0.2 - 0.5 VI 5-6
2 0.5 - 1 VII 5-7
3 1-2 VIII 6-8
2-5 IX 7-9
5 - 10 X 8 or more than 8
4
10 - 20 XI

Sıralama Kriterleri more than 20 XII

TS EN IEC 60068-3-3 : 2019-12

Qualification Kriter
criteria0: Sismik deneye tabi tutulup deney esnasında ve deney sonrasında hiç arıza göstermeyen cihaz.
Sıralama
Criterion 0 :Kriterleri
KriterEquipment
1: Sismiksubjected
deneyetotabi seismic testing
tutulup whichesnasında
deney experiencedbirno arıza
malfunction either
geçiren during
fakat or after the
deneyden [Link] duruma
sonra
Criterion 1 : Equipment subjected to seismic testing which suffered a malfunction during the test but reverted to its
geri dönen cihaz.
correct state after the test.
Kriter
Kriter 0: Sismik2: Sismik
deneye deneye
tabi tabi tutulup
tutulup deney
deney esnasındavebirdeney
esnasında arıza geçiren
sonrasındave deneyin
hiç arıza tamamlanmasından
göstermeyen cihaz. sonra
Criterion 2 : Equipment subjected to seismic testing which experienced a malfunction during the test and required
Kriter 1: Sismik yeniden
resettingdeneye kurma
or adjustment
ve ayar gerektiren
tabi tutulup deney
on completion
fakat herhangi
esnasında
of the
birgeçiren
bir arıza
test but required
parça değiştirme
no replacement fakat veya tamir
deneyden
or repair.
gerektirmeyen
sonra normal durum cih
geri Deprem
It is dönen riski bulunan bölgelerdeki tesislerde, enerjinin kesintisiz bir şekilde
[Link], Low voltage panels should be be tested and certified according to IEC 60068
very important sağlanması için kullanıla
alçak gerilim panolarının IEC 60068 riskstandartlarına togöre gerekli testlerin
[Link]ırılmış ve sertifikalandır
Kriter 2: Sismik
standards for facilities
deneye tabi located
tutulup in earthquake
deney esnasında areas inbir
order
arıza get uninterrupted
geçiren ve deneyin tamamlanmasından son
oldukça önemlidir.
yeniden kurma ve ayar gerektiren fakat herhangi bir parça değiştirme veya tamir gerektirmeyen
Deprem riski bulunan bölgelerdeki tesislerde, enerjinin kesintisiz bir şekilde sağlanması için kulla
213
alçak gerilim panolarının IEC 60068 standartlarına göre gerekli testlerin yaptırılmış ve sertifikalan
Seismic Installation Rules For Stand Alone Panels

Rigid Installation From Top

DETAIL A

DETAIL B

1. Each panel section will be fixed to the mounting floor with M12 anchor bolts with minimum 8.8 mechanical strength
through 4 mounting holes in its base.
2. Each panel section will be fixed to the reinforced concrete building element by using M12 anchor bolts with strong
brackets made of steel material of minimum 3 mm thickness from at least one of the upper lifting connection bolts.
3. It is assumed that structural elements which the connections are made have their own seismic strength.

214
Steel Wire Connection From Top:

PANELMASTER® DİKİLİ TİP KABİNLERİN (PANOLARIN) SİSMİK MONTAJ KURALLARI

1. Her pano gözü, bazasında bulunan 4 adet montaj deliğinden minimum 8.8 mekanik mukavemete sahip M12 ankraj
ÜSTTEN HALAT İLE BAĞLANTI
cıvataları ile montaj zeminine bağlanacaktır.
2. Her pano gözü taşıma halkalarından minimum 4.8 mm çapında çelik halatlar ile M12 ankraj cıvataları kullanılarak
betonarme yapı elemanına bağlanacaktır. İlk ve son gözlerde tekli taşıma halkaları, ara gözlerde ise ikili askı taşıma
halkaları kullanılacaktır.
3. Çelik halatların kabin (pano gözü) üst yüzeyi ile oluşturacağı açı 60° 'yi geçmeyecektir.
4. Bağlantıların gerçekleştirildiği yapı elemanlarının ve buradaki bağlantı şeklinin kendi sismik dayanımının olduğu
Maximum
Maximum
varsayılmaktadır. 60° 60°

14.01.2021 Sayfa 236 / 255

DETAIL A DETAIL A

1. Each panel section will be fixed to the mounting floor with M12 anchor bolts with minimum 8.8 mechanical strength through
4 mounting holes in its base.
2. Each panel section will be fixed to the reinforced concrete building element by using minimum 4.8 mm diameter steel
wire and M12 anchor bolts at carrying rings. Single carrying ring will be used in the first and last sections, and double carrying rings
will be used in the intermediate sections.
3. The angle that the steel wire will create with the upper surface of the cabinet will not exceed 60°
4. It is assumed that structural elements which the connections are made have their own seismic strength.

215
Seismic Rules for Wall
PANELMASTER® Moundted
DİKİLİ TİP KABİNLERİN Panels
(PANOLARIN) SİSMİK MONTAJ KURALLARI

DUVAR TİPİ KABİNLERİN (PANOLARIN) SİSMİK MONTAJ KURALLARI

Concrete WallPANELMASTER® DİKİLİ TİP KABİNLERİN (PANOLARIN)
Betonarme Duvar : SİSMİK MONTAJ KURALLARI

Wall mountedDuvar
panels
tipiwill be fixed
kabinler to reinforced
DUVAR
betonarme TİPİ concrete
KABİNLERİN
duvarlara walls by using 4xM8
(PANOLARIN)
bağlantı SİSMİK
braketlerinden anchor
MONTAJ
minimum bolts
8.8 with minimum
KURALLARI
mekanik 8.8 sahip
mukavemete mechanical
4 adetstrength at
connection brackets.
M8 ankraj cıvatası ile bağlanacaktır. Betonarme Duvar :

ApplicationDuvar
Example:
tipi kabinler
Uygulama Örneği :betonarme duvarlara bağlantı braketlerinden minimum 8.8 mekanik mukavemete sahip 4 adet
M8 ankraj cıvatası ile bağlanacaktır.

Uygulama Örneği :

Betonarme Olmayan Duvar

Non-Concrete Wall
Duvar tipi kabinler betonarme olmayan duvarlara doğrudan bağlanmayacaktır. Bu gibi durumlarda betonarme
Wall-mountedtaban
panelsvewill notarasına
tavan be directly
çelikfixed to non-reinforced
taşıyıcı concrete
Betonarme
konstrüksüyon walls.
Olmayan
yapılacak In such
Duvar
ve kabinin cases, a steel
(panonun) carrier
bağlantı construction will be used (fixed
braketleri
between the concrete floor and the
bu konstrüksüyona ceiling) and
minimum the connection
8.8 mekanik bracketssahip
mukavemete of the4 panel will acıvata
adet M8 be fixedile
tosabitlenecektir.
this construction by using 4 pieces of M8
Duvar tipi
bolts with mechanical kabinlerofbetonarme
strength olmayan duvarlara doğrudan bağlanmayacaktır. Bu gibi durumlarda betonarme
minimum 8.8.
taban ve tavan
Uygulama arasına
Örneği : çelik taşıyıcı konstrüksüyon yapılacak ve kabinin (panonun) bağlantı braketleri
bu konstrüksüyona
Application Example: minimum 8.8 mekanik mukavemete sahip 4 adet M8 acıvata ile sabitlenecektir.

Uygulama Örneği :

All dimensions are in mm.

14.01.2021 Sayfa 237 / 255

14.01.2021 Sayfa 237 / 255

216
 Degree of Protection - IP

IK Mechanical Impact Protection

0,25 kg 0,25 kg 0,25 kg 0,25 kg 0,25 kg 0,25 kg 0,5 kg 1,7 kg 5 kg 5 kg
140 mm

200 mm

280 mm

400 mm

400 mm

300 mm

200 mm

400 mm
56 mm

80 mm

IK Value 01 02 03 04 05 06 07 08 09 10

Impact value (Joule) 0.14 0.20 0.35 0.50 0.70 1 2 5 10 20

Falling Height (mm) 56 80 140 200 280 400 400 300 200 400

Equivalent Weight (kg) 0.25 0.25 0.25 0.25 0.25 0.25 0.50 1.70 5 5

217
Framework Assembly

M8 20 Nm
M8x20

YP A Attention!
2 Assembly should be
X - Width done in such a way
1 that this hole detail jill
DP be visible from sides
3 of the framework.
Y - Depth

X4

x8

Y - Depth

X - Width x2

RECOMMENDED TIGHTENING TORQUE

3,9*9,5 M5 M6 M8 M12

2 Nm 3,5 Nm 6 Nm 20 Nm 40 Nm

218
One enclosure framework including plinth and roof panel can be assembled by two worker in 15 minutes.

PACKING

21 cm

21 cm
VERTICAL PROFILE SET

m
6c
20+ MODULE SET
00/2
0/2
18
11 cm

0
FIXED PANEL /12
10
00/1
40 /1
/50 /90
/60 /80
/70 0/70
/80 /6
FRONT DOOR /50
40

219
Notes:

220