Footstep Power Generator
PRESENTED BY:
• ABHIRAJ KUMAR
. GAURAV KUMAR
. HIMANSHU KUMAR
. ASHUTOSH KUMAR SINGH
. AMRENDRA KUMAR
. ANAND SINGH
DATE : [ 3/4/2025 ]
INTRODUCTION
1. .FOOTSTEP POWER GENERATION ISAN INNOVATIVE METHOD
OF HARNESSING KINETIC ENERGY FROM HUMAN FOOT
TRAFFIC AND CONVERTING ITINTO USABLE ELECTRICAL
POWER. THIS TECHNOLOGY ISPARTICULARLY USEFUL IN
HIGH-FOOTFALL AREAS SUCH AS TRAIN STATIONS, AIRPORTS,
SHOPPING MALLS, AND SCHOOLS.
2. ITPROVIDES AN ECO-FRIENDLY SOLUTION TO ENERGY
NEEDS BY UTILIZING WASTED MECHANICAL ENERGY.
COMPONENTS
1. step motor – convert energy by steping it .
.2. valve spring – for pressure
.3. BATTERY STORAGE – STORES GENERATED ELECTRICITY FOR LATER USE
.4. VOLTAGE REGULATOR – ENSURES STABLE POWER OUTPUT
.5 . Led bulb 9w – for glow through generator
6. BASE FRAME – PROVIDES STRUCTURAL SUPPORT FOR THE SYSTEM.
WORKING PRINCIPLE
THE FOOTSTEP POWER GENERATOR WORKS BASED ON THE
PRINCIPLE OF MECHANICAL ENERGY CONVERSION. WHEN A
PERSON WALKS OVER A SPECIALLY DESIGNED FLOOR PANEL,
PRESSURE IS EXERTED ON MECHANICAL SYSTEMS (SUCH AS
DYNAMO-BASED SETUPS), GENERATING ELECTRICITY. THIS POWER
CAN BE STORED IN BATTERIES OR USED DIRECTLY TO POWER SMALL
DEVICES AND LIGHTING SYSTEMS.
ADVANTAGE
1. ECO-FRIENDLY – NO HARMFUL EMISSIONS, MAKING IT
SUSTAINABLE.
2. RENEWABLE SOURCE – ENERGY ISCONTINUOUSLY AVAILABLE
IN BUSY AREAS.
3. COST-EFFECTIVE – REDUCES DEPENDENCE ON FOSSIL FUELS.
4. LOW MAINTENANCE – ONCE INSTALLED, REQUIRES MINIMAL
UPKEEP.
5. REDUCES ENERGY WASTAGE – CONVERTS NORMALLY
WASTED KINETIC ENERGY INTO USEFUL POWER.
6. ENHANCES SMART INFRASTRUCTURE – SUPPORTS SMART
CITIES AND MODERN URBAN PLANNING.
DISADVANTAGE
1. HIGH INITIAL COST – INSTALLATION AND MATERIALS
CAN BE EXPENSIVE.
2. LIMITED POWER OUTPUT – GENERATES SMALL
AMOUNTS OF ELECTRICITY.
3. DEPENDENCE ON FOOT TRAFFIC – EFFICIENCY
DEPENDS ON CROWD MOVEMENT.
4. COMPLEX INSTALLATION – REQUIRES
INTEGRATION WITH ELECTRICAL SYSTEMS.
5. DURABILITY ISSUES – COMPONENTS MAY WEAR
OUT WITH CONSTANT PRESSURE.
APPLICATIONS
1. STREET LIGHTING – FOOTSTEP-GENERATED ENERGY CAN
POWER LED STREETLIGHTS.
2. PUBLIC TRANSPORT STATIONS – POWERING DIGITAL
DISPLAYS, TICKET MACHINES, OR WI-FI ZONES.
3. SHOPPING MALLS & AIRPORTS – REDUCING
DEPENDENCY ON CONVENTIONAL ELECTRICITY.
4. GYMNASIUMS & PARKS – USING ENERGY FROM
WORKOUTS AND PEDESTRIAN MOVEMENT.
5. SMART CITIES – INTEGRATING WITH IOT SYSTEMS FOR
EFFICIENT ENERGY USE.
FUTURE SCOPE
1. WITH ADVANCEMENTS IN MATERIAL SCIENCE AND
SENSOR TECHNOLOGY, FOOTSTEP POWER
GENERATORS CAN BECOME MORE EFFICIENT AND
WIDESPREAD.
2. INTEGRATING IOT-BASED MONITORING AND AI-
DRIVEN OPTIMIZATION CAN ENHANCE ENERGY
UTILIZATION.
3. FUTURE IMPROVEMENTS IN ENERGY STORAGE
SOLUTIONS CAN MAKE THIS TECHNOLOGY A KEY
COMPONENT OF SMART AND SUSTAINABLE CITIES.
CONCLUSION
• FOOTSTEP POWER GENERATION ISA PROMISING
INNOVATION IN THE FIELD OF RENEWABLE ENERGY.
• WHILE ITHAS LIMITATIONS, CONTINUED RESEARCH AND
TECHNOLOGICAL ADVANCEMENTS CAN OVERCOME THESE
CHALLENGES, MAKING ITA VIABLE ALTERNATIVE ENERGY
SOURCE IN URBAN AREAS.
• IMPLEMENTING THISTECHNOLOGY IN CROWDED PLACES
CAN CONTRIBUTE TO GLOBAL SUSTAINABILITY GOALS
WHILE PROMOTING ENERGY CONSERVATION.
REFERENCE
1. SINGH, R., & VERMA, A. (2020). DESIGN AND IMPLEMENTATION OF FOOTSTEP POWER
GENERATION SYSTEM USING PIEZOELECTRIC SENSORS. INTERNATIONAL JOURNAL
OF ENGINEERING RESEARCH & TECHNOLOGY (IJERT), 9(5), 234-238
2. 2. KUMAR, S., & SHARMA, P. (2019). HARVESTING ENERGY FROM HUMAN FOOTSTEPS
FOR SUSTAINABLE POWER GENERATION. IEEE CONFERENCE ON RENEWABLE ENERGY,
35(4), 98-103.
3. 3. GUPTA, P., & RAJPUT, M. (2018). DEVELOPMENT OF A SMART FOOTSTEP POWER
GENERATION SYSTEM USING PIEZOELECTRIC MATERIALS. INTERNATIONAL
CONFERENCE ON SMART ENERGY SYSTEMS, 112-120.
BOOKS & THESES:
JOHN, D. (2017). ALTERNATIVE ENERGY SOURCES: HARNESSING POWER FROM EVERYDAY
MOTION. CAMBRIDGE UNIVERSITY PRESS.
PATEL, R. (2021). MICRO ENERGY HARVESTING TECHNOLOGIES FOR SUSTAINABLE
DEVELOPMENT. PHD THESIS, MIT ENERGY LAB.
THANK YOU !
. CONTACT : [ 8969126190 , 7654441874 ,
7004780409 ]
