(Q) 1. The end A of line AB 10 mm above HP and 35 mm in front of VP.
While other end 45mm
below HP and 55mm behind VP. The end projector of the line 65mm draw projection and
determined true length and inclination.
(Q) 2. The elevation of a rectangular lamina ABCD of 25 x 50 mm. sides is a square of 25 mm
side when its side AB is in V.P. and the side AD is making an angle of 20°to the H.P. Draw the
Projections.
(Q) 3. Draw the isometrics view of hexagonal prism base is 30mm and axis 70mm long which
is rest on ground with base corner is in HP.
.
(Q) 4. Name and explain five edit commands in CAD.
(Q) 5. What is CAD? Explain its advantages and disadvantages.
(Q) 6. Draw the Projection of a circle of 40 mm dia. resting on H.P. on a Point on the
circumference. Its plane is inclined at 30’ to the H.P. and perpendicular to the V.P. Its centre is 35
mm in front of the V.P.
(Q) 7. A pentagonal pyramid, base 25 mm side and axis 50 mm long has one of its triangular faces
in the V.P. and the edge of the base contained by that face make an angle of 30’ with the H.P. Draw
its projections.
(Q) 8. A Cylinder of diameter of base 40 mm and axis 55 mm long is resting on its base on H.P. It
is cut by a sectional plane perpendicular to V.P. and inclined at 45’ to H.P. The section plane is
passing through the top end of an extreme generator of the cylinder. Draw the development of the
lateral surface of the cut cylinder
(Q) 9. ) A Rectangular plot of 100 km2 is represented on a certain map by a rectangular area of 4
cm2 Draw a scale to show 50 km and mark a distance of 41 km an it.
(Q) 10. (A) To construct a scale to show meter and decimeter and 2.5cm represents 1m and long enough to measured up
to [Link] a distance 4.5m on it.
(B)Construct a scale of 3/100 showing meter, decimeter and centimeter and long enough to measure up to 5m. Show the
distance of 3.69m on it.
(Q) 11. Construct an ellipse when the distance of its focus from the directrix is 50mm and eccentricity is 2/[Link]
draw a tangent and normal to the curve at a point 70 mm away from the directrix.
(Q) 12. Draw a curve when a rolling circle of diameter 60mm rolls outside on another circle of diameter 120mm for
one complete revolution. Name the [Link] also draw a tangent & normal at any point.
Q. [Link] front view of a line AB measures 65 mm and makes an angle of 45°with XY.A is in the H.P. and
the V.T. of the line is 15 mm below the H.P. The line is inclined at 30° to the V.P. Draw the Projections of
AB and find its true length and inclination with the H.P. Also of AB and find its true length and inclination
with the H.P. Also locate its H.T.
(Q) 14Write short notes
A) Orthographic Projection
B)Traces of a line
c)First angle and third angle projection
(Q) 15 Differance between 2D and 3D Wireframe modeling ?
(Q) 16 Draw the projection of cone base diameter 50mm and axis 65mm long its base rest on the ground,
it is cut by section plane perpendicular to VP passing through 30mm above the base and make an angle 40*
to HP. Draw sectional top view and true shape of the section?
(Q) 17 Draw the isometric view of cylinder having 50mm base diameter and 70mm long axis?
(Q) 18 An area of 144 cm2 on a map represents an area of 36 km2 on the field. Find the R.F. of the
scale for the map and draw a diagonal scale to show kilometers, hectameters and decameters and to
measure upto 10 km. Indicate on the scale a distance of 7 km 5 hm and 6 dm.
(Q) 19 The end A of line AB 10 mm above HP and 35 mm in front of VP. While other end 45mm
below HP and 55mm behind VP. The end projector of the line 65mm draw projection and
determined true length and inclination.
(Q) 20 A line PQ is in first quadrant. Its ends P and Q are 15 mm and 45 mm in front of the V.P.
respectively. The Distance between the end projectors is 55 mm. The line is inclined at 30° to the
H.P. and its H.T. is 8 mm above XY line .Draw the projections of the line PQ and find its true
length and locate its V.T.
(Q) 21 A 3.2 cm long line represents a distance of 4 m. Extend the line to measure up to 25 m and
show on it units of m and 5 m. show a length of 16 m on this line.
(Q) 22 A right regular pentagonal pyramid side of base20 mm and height 45 mm. rests on a corner
of its base on H.P. such that its axis is inclined at 45’ to the H.P. and is Parallel to the V.P. Draw its
projections.
(Q) 23 A right circular cone diameter of base 50 mm and height 62 mm .lies on H.P. on one of its
elements with axis parallel to V.P. Draw the projections of the cone
(Q) 24 A Pentagonal pyramid side of base 35 mm and axis 60 mm long rests with its base on H.P.
such that one of the edges of the base is perpendicular to V.P. A section Plane perpendicular to H.P.
and parallel to V.P. cut the pyramid at a distance of 20 mm from the corner of the base nearer to the
observer .Draw its top and sectional front view.
(Q) 25 Area of field is 50,000 sq [Link] length and breadth of the field on the map is 10 cm and 8
cm respectively construct a diagonal scale which can read up to [Link] the length of 235 metre
on the [Link] is the R.F. of the scale?
