GE Healthcare

Innova™ IGS 5
with AutoRight™
PRODUCT DATA SHEET
Table of Contents
I Image Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

II Dose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

III Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

IV Gantry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

V Patient Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

VI User interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

VII In room display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

VIII Image management, connectivity and workflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

IX Privacy and Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

X Room Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2 | GE Healthcare
I Image Chain
X-Ray Generator
The IGS system uses a 100 kW high-frequency Jedi three-phase power unit that provides grid pulsed fluoroscopy capability.

Maximum power available 100 kW

Maximum kVp available 125 kVp

Maximum continuous input power 3200 W for the tube unit

Pulse frequency 0.5 to 50 fps

Radiographic/recording mode 50 to 125 kVp

Radiographic mA ratings 1 – 1000 mA

Max. continuous power in fluoro mode 3200 W

Fluoroscopy mode 60 – 120 kVp

Fluoroscopy mA ratings 1 – 130 mA (up to 140 mA with PCI ASSIST)

Fluoroscopic timer Yes

X-Ray Tube
The IGS system is equipped with the high-performance, highly reliable Performix™ 160A metal X-ray tube, which meets requirements for
all vascular applications.

Anode diameter 160 mm brazed graphite

Anode rotation 7800 rpm/ 130 Hz

Anode Target angle 11.25°

Anode heat storage capacity 2.7 MJ (3.7 MHU)

Anode steady state heat dissipation 6.72 kW

Cathode Bi-filament design

Coincident focal spot sizes 0.3, 0.6 and 1.0

• 3200 W (continuous)
Fluoroscopic power
• 4500 W (peak capability for maximum of 10 minutes)

Maximum casing heat storage 5.14 MJ (6.9 MHU)

Continuous casing heat dissipation 3200 W

Maximum anode cooling rate 544 KHU/min (6.72 kW)

Total filtration (IEC 60601-1-3) 1.0 mm Al

Leakage radiation (IEC 60601-1-3) <50 mR/h measured at 3.2 kW (125 kv, 25.4 mA)

Product Data Sheet | 3

 Tube Cooling Unit COOLIX 4100

Cooling type Closed-loop remote water chiller

Maximum Cooling capacity 4100 W

Flow rate 12 l/min

Coolant volume 23 liters in chiller + 17 liters in pipes

Dry weight 120 kg +/- 5

Collimation

Number of collimation blades 2 pairs

0.1, 0.2, 0.3, 0.6 and 0.9 mm of copper (20cm detector)

0.1, 0.2, 0.3 mm of copper (30cm and 40cm detector)
1 integrated contour filter blades (20cm detector)
Spectral filtration
3 integrated contour filter blades (30cm and 40cm detector)
motorized, tapered filter blade that can be rotated 360° as well as
translated in and out using a simple joystick control at tableside

Detector1
The Innova IGS 5 system comes with 3 detector configurations : 20cm detector, 30cm detector or 40cm detector.

Detector manufacturer GE

20.5 cm x 20.5 cm (20 cm detector)

Size of the detector 31 cm x 31 cm (30 cm detector)
41 cm x 41 cm (40 cm detector)

Material Amorphous silicon photodiode array on a continuous substrate

Pixel size 200 x 200 μm

1024 x 1024 (20 cm detector)

Image matrix 1536 x 1536 (30 cm detector)
2048 x 2048 (40 cm detector)

Bit acquisition 14 bit

Mode @ Dose/Fr

DQE values at average fluoro and record dose operating points

Record, e.g. DSA 175 nGy (20 uR) 80% (20 cm detector), 84% (30 cm and 40 cm detector)

Fluoro 8.8 nGy (1 uR) 77% (20 cm detector), 81% (30 cm and 40 cm detector)

Additional DQE values at minimum fluoro dose operating point

Fluoro 2.2 nGy (0.25 uR) 68% (20 cm detector), 73% (30 cm and 40 cm detector)

1
In clinical use, the results of dose reduction techniques will vary depending on the clinical task, patient size, anatomical location and clinical practice.
Physicians assisted by a physicist as necessary have to determine the appropriate settings for each specific clinical task

4 | GE Healthcare
 Note: DQE values given are typical at f = 0 cycles/mm with RQA5 conditions as defined by IEC62220-1-3 standards

Anti-scatter Grid: The system is configured with an anti-scatter grid to enhance image quality during routine imaging. Removal of the
grid can improve the X-ray dose efficiency for infants (e.g. less than one-year-old) for field of view (FOV) smaller than 20 cm (7.9 in).

Grid ratio 13:1

Focal distance of the grid 100 cm (39 in)
Grid Line frequency 70 LP/cm

Image acquisition
Fluoroscopy modes Non-subtracted, subtracted, roadmap, Blended Roadmap†
Fluoroscopy frame rate 30 fps, 15 fps, 7.5 fps and 3.75* fps
Fluorostore 450 fluoro images (up to 900)
Sub/no sub simultaneous display† Yes

• DSA (digital subtracted angiography) at 0 .5 – 7 .5 fps including automated pixel shift

Angio Acquisition Package
• Multi-segment DSA with flexible frame rate and duration and single shot capabilities

Dynamic Acquisition Package 30 fps, 15 fps and 7.5 fps

Innova Chase acquisition 5 fps
Digital output 1024 x 1024
20 cm, 17 cm, 15 cm, and 12 cm (20cm detector)
Field-of-view adjustment from tableside with
30 cm, 20 cm, 16 cm and 12 cm (30cm detector)
four magnification selections (records mode)
40 cm, 32 cm, 20 cm and 16 cm (40cm detector)
Image flip capability Horizontal and vertical image flip capability for all acquisition
Shutter Automated electronic shutter matched to collimated portion of image
Integrated X-ray dose tracking and in-room display of air kerma and dose area product
A configurable auditable tone is activated when using the fluoro mode
*: non-subtracted Fluoro mode only

Image Processing and Review

Immediate auto-review of acquisition
Next and prior sequences or images
Slow and fast review of sequences, forward and reverse
Pause, adjust brightness and contrast during review
Image review with or without edge enhancement filters
Mask select, pixel shift
Store/recall reference images

AutoRight™: Intelligent Image Chain Powered by Edison

AutoRight is the industry’s first AI-driven, neural network-based image chain powered by Edison and digital twin, including embedded
applied intelligence and advanced modelization featuring a complete re-design of GEHC IGS image chain.
AutoRight, is designed to deliver repeatable & faster choices, making image optimization fully automated, dynamically throughout the
entire procedure, from acquisition, to processing and display, regardless of patient size, anatomy or C-arm angulations, which helps
remove the burden of manual adjustment.
AutoRight is the right platform to address the growing demand for full combination capabilities in the interventional suite.
AutoRight’s live parameter optimization provides consistent image quality with the patient’s arms down throughout the whole spin. Not
only is the image quality of these difficult acquisitions consistent and repeatable, which can reduce dose exposure, but it also enables
the use of advanced applications such as virtual injection planning in 3D and the ability to simulate therapy efficacy. Overall, it allows the
clinical team to better plan for, guide, and assess complex procedures in their daily practice.
AutoRight makes the machine an integral part of the team, capable of relieving clinicians and technologists of the tedious yet complex
task of optimizing IQ and dose, helping them focus all their attention and expertise on their patients.
Product Data Sheet | 5
II Dose
Dose Reduction Dose Map†
Dose Map is a feature used to calculate, display and record an
Dose Personalization
estimated local cumulated dose during procedures done on the
Several image-quality and dose strategies are available and can GE X-Ray angiographic system. It is designed to provide to the
be customized for the various clinical acquisition protocols in both user a visualization of the distribution of the local cumulated dose
fluoro and record acquisitions. throughout the exam as well as the current projection of the beam.

InnovaSense†
InnovaSense is an advanced patient contouring technology Estimated local cumulated dose Yes
available with 20cm and 30cm detector configurations that uses
an intelligent algorithm during gantry motion to select the optimal Pediatric patient Yes
position for the image receptor relative to the patient. By reducing
the distance from receptor to patient, the system optimizes Real-time calculation Yes
imaging geometry and helps reduce radiation exposure. The user
also can position both the gantry and detector with one integrated Configurable alert Yes
operation. Capacitive sensor technology and optimized collision
avoidance software enable a speed of pivot and C-arm, of up to 20°
per second.

Dose Awareness
Integrated dose monitoring
The user can monitor air kerma rate, integrated air kerma over
the exam, and the total dose area product received by the patient
during a procedure. The threshold of cumulated dose displayed
on a gauge icon is customizable to warn operator when such
threshold has been reached. The threshold is customizable
depending on the protocol.

Dose reporting
The system provides DICOM** compatible Radiation Dose
Structured Report allowing the export of the dose and related
acquisition parameters.

6 | GE Healthcare
III Applications
2D Applications
InnovaChase™ StentVesselViz†
InnovaChase™ is a dynamic, unsubtracted acquisition at a fixed Being able to see the position of stent into the vessel is especially
frame rate of 5 fps with manual and remote panning of the table. critical in cases of complex clinical situations such as bifurcations
It is optimized for visualization of a run off. or calcified lesions. A complete apposition of stent onto vessel wall
can contribute to prevent stent thrombosis and restenosis.
ECG acquisition package†
StentVesselViz† improves the user confidence in the assessment
With the ECG acquisition package the heart rate is displayed on of the position, correct deployment and shape of the stent in
the console and live monitor. relation with the vessel in 2D versus cine.
The ECG acquisition package is compatible with recording system Thanks to an intuitive workflow, StentVesselViz† is operated
outputs providing analog ECG signals comprised between +/-5 V. smoothly and can help the user position and expand stent
Connection cables compatible with Mac-LabTM†, CardioLab™†, appropriately. The StentVesselViz† option delivers from a single
Combolab† and some third party recording systems are provided acquisition a StentViz† image and then the fusion of this one
with this package. with an image of the injected vessel. Those two images are
automatically fading together for optimized and simultaneous
Quantitative Analysis Package† visualization of stent into the vessel pre and post deployment.
Stenosis Analysis† and Left Ventricle Analysis† allow the user to
perform stenosis and left ventricle measurements and analysis.
With OneTouchQA†, the user can select measurement points
with a fingertip directly on the selected image frame displayed
on the Central Touch Screen at tableside – no mouse or joystick
is required. OneTouchQA† is available for stenosis analysis and
distance measurements.

PCI ASSIST†
PCI ASSIST† is an ASSIST package containing StentViz and
StentVesselViz applications and including High Contrast Fluoro
that increases the mA peak up to 36%, and decreases the pulse
width by 38%. While the dose is equivalent, it is delivered in an
efficient way that helps significantly reduce the blurring in the
image due to organ motion.

StentViz†
The StentViz option enhances visibility of the stent structure. It
is particularly useful in verifying placement and deployment of
stents during coronary interventions where moving arteries could
make visibility challenging. StentViz† processing is fully automated
and can be launched at the press of a button on the Central touch
screen. The result is automatically displayed on the reference
monitor and shows two zoomed and enhanced images of the
stent: One with the guidewire in view and a second one where the
guidewire is subtracted out in the area between the two balloon
markers to allow better visualization of the stent struts or borders.

Product Data Sheet | 7

Blended Roadmap† InnovaBreeze™ peripheral angiography†
Blended Roadmap is a vascular road mapping application that InnovaBreeze†, available with 30 cm and 40 cm detector configurations,
superimposes a previously acquired vascular image over live lets the user follow the contrast using variable panning speed control
fluoroscopy. This advanced application helps clinicians view the in the control room while looking at subtracted images in real time.
progression of guidewires and devices through the vessels. InnovaBreeze† includes Advantage Paste.
Clinicians can select any DSA or bolus image as a reference
roadmap image. By using this image multiple times, Blended
Roadmap has the potential to minimize contrast media injections
during road mapping.
Blended Roadmap† provides additional features to enhance road
mapping procedures, including:
• Adjustment of the subtraction level
• Adjustment of vessel transparency
• Automatic resizing of the roadmap image to adapt to the
fluoroscopic field-of-view
• Pixel shift of the vessel image to compensate for motion
• Blended Roadmap† is available on systems with either
the Omega V or InnovaIQ tables . The Central touch screen
is recommended for table side control .

Advantage Paste*
Advantage paste is an application running on AW VolumeShare
Workstation that provides the ability to reconstruct and visualize
the entire length of the subtracted bolus chasing acquisition on a
single image.

InnovaSpin™†
The offset C-arm permits fast-spin rotational angiography over
a maximum range of 200° at variable speeds from 20° to 40°/
sec (maximum speed of 30°/s from LAO to RAO) with flexible
cranio/caudal oblique angulations. The enhanced InnovaSpin™
trajectories are not constrained to a single transverse plane and
can be used at oblique angulations within physical constraints. A
total of seven trajectories can be preset (limited to five on a tilting
table). The entire workflow for the test run and spin acquisition
can take place at tableside. The spin acquisitions can be performed
in the cardiac record mode for coronaries, or peripheral image
quality can be optimized in the InnovaChase™ mode.

INTERACT – ViewX †
INTERACT View X enables display of the Live X-Ray or fusion of
Pre-Op CT with Live X-Ray, on the Vivid E95 / S70N (with ViewX) as
a picture in picture. With INTERACT View X, the echo cardiologist
is able to follow the whole workflow of the procedure from the
echo display, helping facilitate communication between the echo
cardiologist and the interventional cardiologist.

8 | GE Healthcare
3D Applications MAR†
3DCT HD MAR reduces streak artifacts induced by the presence
3DCT*† of small metallic devices such as coils or clips within the 3D field
3DCT is intended for imaging vessels, bone and other internal of view.
body structures. It helps physicians in diagnosis, surgical planning,
interventional procedures and treatment follow-up. 3DCT Motion Freeze†
performs at 40 degree/sec and can be used with 4 different field of 3DCT HD Motion Freeze is designed to reduce artefacts caused by
views. It utilizes automatic exposure technique to optimize image involuntary respiratory motion during the rotational acquisition
quality and dose all along the rotational acquisition. and recover small detail visibility impacted by motion.

3DCT HD*† INTERACT – Active Tracker†

3DCT HD is intended for imaging vessels, bone, soft tissues, and 3DCT HD Active Tracker automatically detects the omniTRAX™
other internal body structures. It helps physicians in diagnosis, Active Tracked device and adds its location to the 3DCT HD
surgical planning, interventional procedures and treatment datasets. GE LOGIQ E9 can use the Active Tracked locations in
follow-up. 3DCT HD offers 3 rotation speeds: 16, 28 and 40 degree/ order to facilitate fusion with live ultrasound images.
sec, and 4 different field of views. It utilizes automatic exposure
technique to optimize image quality and dose all along the Subtracted 3D*†
rotational acquisition.
Subtracted 3D† enhances the 3DCT / 3DCT HD application by
adding automated sequential mask and contrast spin acquisitions
3DCT 3DCT HD with processing protocols to produce subtracted 3D vascular
images. Clinicians may use Subtracted 3D† to quickly visualize
Spin duration 5 sec. 5, 7, 13 sec. vessels without the need to remove surrounding bone, tissue,
and implanted devices. The output of the 3D processing provides
Frame rate 50 fps 50 fps convenient side-by-side and separate visualization of the mask
series, the subtracted vascular anatomy and the standard
512x512x512 512x512x512 segmented 3D vascular images.
Reconstructed 3D
model resolution 256x256x256 256x256x256 Interventional devices such as coils, stents, glue and clips, as well
as calcified plaque, are visible on the mask image and can be fused
onto the subtracted image. Their transparency can be adjusted for
optimal visualization of the implanted devices in relationship to the
vascular anatomy.

Workstations
Two optional workstations, the AW and the CA1000 workstations,
can be connected to the system depending on site requirements.
AW is a multi-modality (CT, MR, XR, TEP, CBCT…) image review,
comparison, and processing workstation. It allows the use
of real-time image fusion applications through a dedicated
communication interface: fastlink (1Gb/sec).
CA1000 provides comprehensive image viewing capabilities for
nearly all DICOM** images in a cardiology-specific display protocol
and it also provides advanced cardiac X-ray analysis tools.

Transfer of the acquired data to the AW workstation is automated

including image reconstruction, processing and display. The resulting
3D model can be visualized as axial slices and volume rendering.
Slice reconstruction for 3DCT/3DCT HD can be exported as DICOM
CT format.

Product Data Sheet | 9

IV Gantry
Positioner specifications

L-arm rotation on vertical axis ±100° (±95° motorized limit set)

C-arm angulation 50° cranial and 45° caudal

Combination of movements of the C-arm and L-arm Permits -/+55° cranial and caudal angulations

C-arm angulations speed 0 to 15° (Up to 20°/sec with InnovaSense†)

Offset C-arm -117°/+105° RAO/LAO rotations

107 cm (42 in) with L-arm at 0° provides femoral coverage on

Offset C-arm throat depth
most patients without rotating the L-arm

Fully motorized SID 8.9 cm/s – 3.5 in/s

85 cm to 119 cm (33 in to 47 in) – 20cm detector configuration

SID range 89 cm to 119 cm (35 in to 47 in) – 30cm detector configuration
95 cm to 119 cm (37 in to 47 in) – 40cm detector configuration

Tube Focal Spot distance to Isocenter (SOD) 72 cm (28 in)

Isocenter to floor distance 107 cm (42 in)

• Anatomical mode to hold the view while moving the L-arm to

an optimum patient access position.
Positioning modes • Mechanical angulation allows movement of any one of the
three axes independently for maximum positioning flexibility
and vessel profiling

Support Floor-mounted

~ 670 kg (20cm detector configuration)

Weight ~705 kg (30cm detector configuration)
~750 kg (40cm detector configuration)

10 | GE Healthcare
V Patient Table
The Innova IGS 5 system comes with either Omega table (Omega IV table is only available with 20cm detector configuration) or with
InnovaIQ table.

Omega IV Omega V

Maximum total load 304 kg (670 lbs.) 304 kg (670 lbs.)

Maximum patient weight 204 Kg (450 lbs.) 204 Kg (450 lbs.)

100 kg (220 lbs.) while complying with the 100 kg (220 lbs.) while complying with the
following -maximum weight requirements: following -maximum weight requirements:
• 40 kg (88lbs.) on each of the two fixed • 40 kg (88lbs.) on each of the two fixed
Maximum accessories weight
side rails side rails
• 20 kg (44 lbs.) of accessories on the table • 20 kg (44 lbs.) of accessories on the table
foot-end rail (option) foot-end rail (option)

CPR 50 kg (110 lbs.) additional maximum load 50 kg (110 lbs.) additional maximum load

Less than 0.85mm Al 1100 Equivalence, Less than 0.85mm Al 1100 Equivalence,
Tabletop absorption
100 KVp 100 KVp

Tabletop Material Radio translucent carbon fiber tabletop Radio translucent carbon fiber tabletop

Tabletop length 300 cm (118 in) 333 cm (131 in)

Tabletop width 46 cm (18 in) in patient trunk area 46 cm (18 in) in patient trunk area

Horizontal Float Movement 8-way 8-way

Longitudinal travel Up to 110 cm (43.3”) Up to 170 cm (67”)

Longitudinal Speed 15 cm/s 15 cm/s

Up to 187 cm (73 in) – 20 cm detector

Imaging coverage with
Up to 127 cm (50 in) Up to 195 cm (76 in) – 30 cm detector
table panning
Up to 201 cm (79 in) – 40 cm detector

Transverse Travel ± 14 cm (± 5.5”) ± 14 cm (± 5.5 in)

Vertical travel above floor From 78 cm (30.7 in) to 108 cm (42.7 in) From 78 cm (30.7 in) to 108 cm (42.7 in)

2 cm/s (0.8 in/s) at 50 Hz 2 cm/s (0.8 in/s) at 50 Hz

Vertical Speed
2.5 cm/s (1 in/s) at 60 Hz 2.5 cm/s (1 in/s) at 60 Hz

Available on the base section of the tabletop Available on the base section of the tabletop
Accessories rails
to mount tableside controls and IV pole to mount tableside controls and IV pole

Table weight ~ 590 kg ~ 590 kg

Product Data Sheet | 11

 InnovaIQ Table

Maximum total load 320 kg (705 lbs.)

Maximum patient weight 250 kg (551 lbs.)

Maximum accessories weight 116kg (255 lbs.) while complying with the following -maximum weight requirements:
• 40 kg (88 lbs.) on each of the two fixed side rails
• 20 kg (44 lbs.) on each of the two removable side rails
• 16 kg (35 lbs.) for other miscellaneous components/accessories

CPR 50 kg (110 lbs.) additional maximum load

Position for CPR accessible using a dedicated auto-positioner memory position

Imaging coverage with table Up to 187 cm (76 in) – 20 cm detector

panning Up to 195 cm (76’ in) – 30 cm detector
Up to 201 cm (79 in) –40 cm detector

Tabletop absorption Less than 0.85 mm Al Equivalence, 100 KVp

Tabletop material Radio translucent carbon fiber tabletop

Tabletop length 333 cm (131 in)

Tabletop width 46 cm (18 in) in the patient trunk area

Longitudinal travel Up to 170 cm (67 in)

Longitudinal speed Up to 25 cm/s

Transverse travel • +/-14 cm (5.5 in) in manual mode

• +/-13 cm (5.1 in) with motorized panning

Vertical travel • Without tilt: From 78 cm (30.7 in) to 108 cm (42.7 in)
• With tilt: From 80 cm (31.5 in) to 137 cm (53.9 in)

Vertical speed Up to 2.5 cm/s (1 in/s)

Tilting angles 20° Trendelenburg (head down), 12° reverse Trendelenburg (head up) 2

Tilting speed Up to 2°/sec

Tilting modes • Isocenter tracking mode to help maintain the region of interest centered during the tilt
• Incidence-keeping mode: The gantry moves in synchronization with the table tilt. In this
mode, clinicians can also pan the table to follow the contrast media

Patient mattress 5 cm (2 in) mattress

Mattress is a sandwich of 2 Visco Elastic foams of 1 in thickness each, top layer of which with
density of 85 Kg/m3 (provides support and envelops quickly and efficiently adapting to patient
body shape) is laminated to a lower layer with density of 110 Kg/m3 (capable of redistributing
loading forces), with X-Ray absorption of < 1.2mm Al Equivalence @ 3.6HVL, 100 KVp

Table weight ~ 1017 kg

Auto-positioning features Memorizes the table and gantry position simultaneously or separately. Table auto-positioning
includes longitudinal, lateral, vertical and tilt movements of the tabletop.

Auto-positioning control From tableside or from the control room†

Interconnect panel Includes connectors for injectors, two potential equalization outlets, gantry and
tableside status control

Accessories rails Available on the base section of the tabletop to mount tableside controls and IV pole

12 | GE Healthcare
Table accessories for InnovaIQ table
Tilt accessories† Dedicated shoulder and foot rests provide optimal patient comfort when using maximum tilt

Anesthesia screen holder† Malleable screen holder that helps separate the patient’s head from the surgical site during
procedures

Removable rails3 Standard size table rails that can be adapted on the trunk section of the table to
accommodate tableside user interface or comfort accessories

Arm boards with cushions† Arm boards with thick pads that can be mounted on the removable rails4

Patient comfort accessories† • Table width extenders

• Patient restraint straps
• Head support widener

Sockets† • Universal clamp

• Easy Lock socket

TSUI adaptor rail† Allows attachment of TSUI on removable rails

Rail extenders† To be adapted on the head section of the table; can handle up to 15 kg (33 lbs.) of accessories
on each of the two side rails.

Accessories cart† For accessories storage

2
Typical values
3
Available as an option with the InnovaIQ Table
4
Available in US (0.4 x 1.1 in) and European (10 x 25 mm) standard sizes
Product Data Sheet | 13
VI User interface
In the examination room

Table and gantry controls

SmartBox or SmartHandle5 (A second SmartBox or SmartHandle can be added at tableside or in the control room) provide simple
gantry and table motion access throughout the exam. SmartBox or SmartHandle control system motions, disable/enable patient
contouring, system lock/unlock and emergency stop.

The Tableside Status Control (TSSC) provides simple access to key acquisition and review parameters throughout the exam. A
second TSSC can be added at tableside or in the control room. TSSC controls: Acquisition preference settings, fluoro level, fields-of-
view, subtracted/non-subtracted fluoro, fluoro landscape, room light on/off, fluoro timer reset, fluorostore and auto positioner.

To provide more AW capabilities at tableside, an interface kit† enabling to connect an in room wireless mouse to drive the AW from
table side is available.

The IGS system fluoro/acquisition footswitch can optionally come as wireless footswitch†.

Smart Nav is an innovative solution to control some IGS system functionalities from tableside and from the control room. It allows
fast function access in displaying menu controls on the reference monitor upon user request. With Smart Nav, the user can keep his/
her attention on the screen monitors where clinical images are also displayed. Smart Nav is controlled from the central touch screen,
local keypad or remote keypad, providing intuitive and context-based navigation. Smart Nav controls: In-room browser, review and
processing tools, review sequence/photo, stopwatch (play, pause, stop, reset), Dose Map†, StentViz†, StentVesselViz†.

In the control room

A remote stand is provided to use the second tableside user interface† in the control room

The IGS system includes one B&W 48 cm (19 in) LCD monitor for display of live images in the control room.
Additional reference and subtracted roadmap repeater monitors† are available

Dedicated keypad for convenient control of commonly used review functions provides an image shuttle knob
to control playback and one-touch access to image review functions

Pause, adjust brightness and contrast during review

Flat graphic display with easy point-and-click mouse control supports patient management and
advanced processing and analysis features

Keyboard enables patient data entry

5
The SmartHandle is available with the Omega table only

14 | GE Healthcare
VII In room display
IGS system can be installed with 48 cm (19 in) LCD monitors as primary display or GE Large Display Monitor as primary display.

48 cm (19 in) live and reference imaging monitors

RX 150

Diagonal 48 cm (19 in)

Active Display 376 x 301 mm

Display matrix 1280 x 1024

800 cd/m² (typical)

Brightness
400 cd/m² (calibrated)

Viewing angles 176°, 176° (typical)

LUT 10 Bit

Frequency 50 – 75 Hz

Contrast ratio 1000:1 (typical)

Greyscale Tones 1024

Power consumption 65 W

AW color monitor

MX 193

Diagonal 48 cm (19 in)

Active Display 376 x 301 mm

Display matrix 1280 x 1024

Brightness 330 cd/m² (typical)

Viewing angles 178°, 178° (typical)

Frequency 31 – 64 Hz

Contrast ratio 900:1 (typical)

Power consumption < 31W

Product Data Sheet | 15

GE Large Display Monitor†
The GE Large Display Monitor† (LDM) is an in-room primary monitor designed to streamline procedure workflow. It includes a video server
solution and is fully integrated with the Central Touch Screen at tableside.

GE Large Display Monitor specifications

Diagonal 148 cm (58 in)

Active Display 127 x 72 cm

8 megapixels
Display matrix
3840 x 2160-pixel array

Calibrated brightness 400 cd/m²

Viewing angles 176°, 176° (typical)

Frequency 59.7 – 60.3 Hz

Contrast ratio At least 3500:1

10 video inputs6 for Live, Reference, AW and optional subtracted Fluoro monochrome
Video inputs signals as well as for a wide variety of other video signals usually used in an interventional
environment – including three free open inputs compatible with VGA and DVI video formats.

• Up to 200
Layouts • Organized into user or application groups
• Digital zoom (up to 200%)

User interface Layouts are selectable from the central touch screen

48 cm (19 in) live and reference monitors attached at the back of the LDM or on
Back-up monitors
another suspension†

Additional HD output† For HD video compatible solutions (second 8MP monitor, 2MP HD monitor, recorder…)

Protection screen† Yes

V-Point† In-room HDMI connector for other modality source display on the Large Display Monitor

An optional kit to interface a third-party suspension according to GE Healthcare specifications allows users to install another third-party
suspension instead of the standard GE Healthcare monitor suspension offering.

6
Can optionally be equipped with video processor up to 16 inputs and over 120 layouts

16 | GE Healthcare
VIII Image management, connectivity and workflow

Record images stored in 8 bits, maximum 450 images per sequence. Storage capacity: 136,000 record images

DSA images with 12 bits data stored in 16 bits, maximum 450 images per sequence. Storage capacity: 68,000 DSA images

DICOM image output on 100Mbit Ethernet with Autosend and background transfer for fast transmission with minimal user interaction.

Patient worklist capability provides a single point of entry of patient data, increasing staff productivity and eliminating clerical errors:
patient information can easily be imported into the digital system from information systems that support DICOM Worklist Service
Class Provider.

Multi-destination Push enables images to be sent to multiple remote DICOM destinations sequentially (one after another). Multi-
destination helps to support a clinical scenario of handling post processing and archival activities in multiple destinations independently
of each other (workstation, PACS). Multi-destination provides a seamless integration of the system into clinical workflow.

MPPS: Modality Performed Procedure Step allows the IGS system to share the main exam parameters with the hospital information system.

For the 3DCT/3DCT HD option, users can direct-push the 3D acquisition directly to the pre-configured AW, even if the images of the
exam are pushed to a PACS or another archiving system.

For further information about DICOM** conformance statement:

[Link]

Product Data Sheet | 17

.

Access controls The provisioning of password-protected user accounts allows controlling the access to sensitive
information of the clinical application and the operating system. The clinical application can be accessed
through local accounts as well as centralized enterprise accounts. Local accounts of the clinical application
and the operating system support password changes, and configuration of complex password rules and
account policies.

User authorization The user accounts are members of role-based groups, which grants the users with the group’s
permissions. It allows restricting the access by unauthorized users to specific parts of the application.
An unauthenticated emergency access mode can be configured, which makes the clinical application
available for clinical procedures.

Audit trails The audit trail capability generates and exports to a central server the audit records of events
related to security and privacy: system state changes, user authentication, account management,
patient data manipulation, malware detection, network communications and service operations.
This provides means to remotely monitor such events, and to protect the system against individuals
falsely denying having performed actions to be covered by non-repudiation.

Anti-malware† A whitelisting-based malware protection contains a list of all authorized executables to create a
closed protected system. It blocks any kind of modification to the whitelisted files as well as the
execution of any unauthorized program. This provides a complete endpoint security against malware.

Firewall The IGS system provides two levels of network firewall: (1) operating system firewall, and (2) external
firewall/router device. These firewalls isolate network traffic to only those systems required for
communication. The firewalls can manage inbound and outbound traffic rules to deny-all and allow-
by-exception based on authorized ports and/or IP addresses.

Data privacy The IGS system provides de-identification and encryption capabilities to limit privacy risks to
sensitive information. The patient data exported during clinical workflow may be encrypted by using
the DICOM TLS protocol. The person names and patient identifying attributes that are collected for
service purposes are anonymized by using FIPS 140-2 compliant one-way hashing algorithms.

18 | GE Healthcare
X Room Requirements

Load distribution for the gantry 2678 kg/m²

Load distribution for the Omega Table 3065 kg/m²

Load distribution for the InnovaIQ Table 2260 kg/m²

2.71 m with dual arm fix point suspension or 2.74 m with rails
Minimum ceiling height
and bridge suspension (9 ft)

Minimum Room dimensions with Omega IV table

5.47 m (17 ft 11 in) length and 4.4 m (14 ft 5 in) width
(without accessories)

Minimum Room dimensions with Omega V table

6.04 m (19 ft 10 in) length and 4.4 m (14 ft 5 in) width
(without accessories)

Minimum Room dimensions with InnovaIQ table

6.14 m (20 ft 2 in) length & 4.4 m (14 ft 5 in) width
(without accessories)

Humidity 20 to 70 % in exam room

Range of temperature 15 to 32 °C in exam room

Atmospheric pressure 70 to 106 kPa

System Power

Nominal 380 to 480 Volts AC, three phase 50 or 60 Hz without neutral.

Maximum momentary power demand: 150 kVA

Emergency power supply

In case of power outage, an Uninterruptible Power Supply† (UPS) supports the system.

1kVA UPS 8kVA UPS 20kVA UPS

Only available with IGS systems Available with all configurations .

with Omega table

Supports proper system Supports emergency table control and Supports emergency table control and
shutdown in case of power vital components (preventing to fluoroscopy until the power is restored
outage require to re-boot) until the power is
restored

Product Data Sheet | 19

Typical room layout

Customer service
Advanced remote connectivity allows GE to monitor systems and intervene if necessary.

Serviceability
The Digital System Manager simplifies troubleshooting and minimizes downtime with built-in equipment error logging and power-up
diagnostics in real time. Resident software monitors the entire system, including peripheral hardware. The IGS system features 24-hour
InSiteTM remote service diagnostics and repair. InSiteTM service is available to systems covered by the original warranty or by a GE service
contract (broadband required).

Extended service†
An optional full-service contract ensures uptime even after the original warranty expires and provides advanced remote diagnostics
through a broadband or phone connection.

20 | GE Healthcare
Product Data Sheet | 21
22 | GE Healthcare
Product Data Sheet | 23
Product may not be available in all countries and regions .
Cannot be placed on the market or put into service until it has been made
to comply with all required regulatory authorizations including the Medical
Device Directive requirements for CE marking .
Full product technical specification is available upon request .
Contact a GE Healthcare Representative for more information .
Please visit www .gehealthcare .com/promotional-locations .
Data subject to change .
© 2020 General Electric Company . DOC1996665
GE, the GE Monogram, imagination at work are trademarks of General
Electric Company .
† Option
*Requires AW .
**DICOM is a registered trademark of National Electrical Manufacturers
Association, All third party trademarks are the property of their respective
owners .
IGS system refers to Innova IGS 5 system
Reproduction in any form is forbidden without prior written permission
from GE . Nothing in this material should be used to diagnose or treat any
disease or condition . Readers must consult a healthcare professional .

GEA33295A I 12/2020