Scribd
Upload
19 views7 pages

Brief 5

The document details the design and analysis of a beam to column fin-plate connection according to EC 3 standards, including applied forces, basic dimensions, and material specifications. It presents a series of checks for structural integrity, detailing practices, and resistance calculations, all of which pass with satisfactory unity ratios. The results indicate that the connection is structurally sound and meets the required design criteria.

Uploaded by

Canny Engineer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views7 pages

Brief 5

The document details the design and analysis of a beam to column fin-plate connection according to EC 3 standards, including applied forces, basic dimensions, and material specifications. It presents a series of checks for structural integrity, detailing practices, and resistance calculations, all of which pass with satisfactory unity ratios. The results indicate that the connection is structurally sound and meets the required design criteria.

Uploaded by

Canny Engineer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

BRIEF 5

Beam to Column Fin-plate Connection to EC 3 (UK NAD)


Basic Data
User Defined Applied Forces at Interface
Shear Forces Flange 1 = 100.0 kN, Web 1 = 100.0 kN
Flange 2 = 100.0 kN, Web 2 = 100.0 kN
Tie Forces Flange Left 75.0, Flange Right 75.0, Web Left 75.0, Web Right 75.0 kN
Design to EC 3: Part 1-8: 2005 Design of Connections
SCI Green Book P358: Joints in steel construction: Simple joints to Eurocode 3
Fin plate flexible support Fin plate and weld designed for shear only
Bolt group designed for shear and moment Ved.z
Basic Dimensions
Flange 1-457x191UB67 [S 355] D=453.4, B=189.9, T=12.7, t=8.5, r=10.2, py=355
Flange 2-533x165UB66 [S 355] D=524.7, B=165.1, T=11.4, t=8.9, r=12.7, py=355
Web 1-457x191UB67 [S 355] D=453.4, B=189.9, T=12.7, t=8.5, r=10.2, py=355
Web 2-610x229UB125 [S 355] D=612.2, B=229.0, T=19.6, t=11.9, r=12.7, py=345
Column -254x254UC73 [S 355] D=254.1, B=254.6, T=14.2, t=8.6, r=12.7, py=355
Bolts 20 mm Ø in 22 mm holes Grade 8.8 Bolts
Plates S 355 All weld grades provided to suit minimum connected steel grade

Summary of Results (Unity Ratios)


Checks for Flange Beam on Side 1
Check 1 Detailing Practice 0.76, 0.80 0.80 OK
Check 2: Bolt Shear & Bearing 0.26, 0.25, 0.21 0.26 OK
Check 3: [Link] Connect Elmts. 0.22, 0.20, 0.23, 0.08 0.23 OK
Check 4: Shear & Bending 0.12, 0.13, 0.08 0.13 OK
Check 8: Welds , 0.17, 0.06 0.17 OK
Check 10: Supporting Member 0.05, 0.04 0.05 OK
Check 11: Structural integrity-Plate 0.12, 0.13, 0.13, 0.19, 0.15 0.19 OK
Check 12: Structural integrity-Beam 0.11, 0.13, 0.09, 0.18 0.18 OK
Checks for Flange Beam on Side 2
Check 1 Detailing Practice 0.73, 0.80 0.80 OK
Check 2: Bolt Shear & Bearing 0.21, 0.20, 0.16 0.21 OK
Check 3: [Link] Connect Elmts. 0.18, 0.17, 0.20, 0.06 0.20 OK
Check 4: Shear & Bending 0.10, 0.11, 0.06 0.11 OK
Check 8: Welds , 0.13, 0.04 0.13 OK
Check 10: Supporting Member 0.04, 0.03 0.04 OK
Check 11: Structural integrity-Plate 0.10, 0.11, 0.11, 0.16, 0.13 0.16 OK
Check 12: Structural integrity-Beam 0.09, 0.10, 0.07, 0.14 0.14 OK
Checks for Web Beam on Side 1
Check 1 Detailing Practice 0.76, 0.80 0.80 OK
Check 2: Bolt Shear & Bearing 0.26, 0.25, 0.21 0.26 OK
Check 3: [Link] Connect Elmts. 0.22, 0.20, 0.23, 0.08 0.23 OK
Check 4: Shear & Bending 0.12, 0.13, 0.08 0.13 OK
Check 8: Welds , 0.17, 0.06 0.17 OK
Check 10: Supporting Member 0.72, 0.14 0.72 OK
Check 11: Structural integrity-Plate 0.12, 0.13, 0.13, 0.19, 0.15 0.19 OK
Check 12: Structural integrity-Beam 0.11, 0.13, 0.09, 0.18 0.18 OK
Checks for Web Beam on Side 2
Check 1 Detailing Practice 0.73, 0.80 0.80 OK
Check 2: Bolt Shear & Bearing 0.17, 0.17, 0.10 0.17 OK
Check 3: [Link] Connect Elmts. 0.15, 0.15, 0.17, 0.04 0.17 OK
Check 4: Shear & Bending 0.06, 0.07, 0.03 0.07 OK
Check 8: Welds , 0.11, 0.03 0.11 OK
Check 10: Supporting Member 0.72 0.72 OK
Check 11: Structural integrity-Plate 0.09, 0.09, 0.09, 0.13, 0.11 0.13 OK
Check 12: Structural integrity-Beam 0.06, 0.06, 0.05, 0.09 0.09 OK

Checks for Flange Beam on Side 1


Check 1: Recommended Detailing Practice
Plate Depth >= 0.6•D 0.6 • 453.4 = 272 mm 360 mm OK
Plate thickness check min(tfin 8.0/0.5, tweb 8.5/0.42) / F 0.80 < 1 OK
Check 2: Supported beam - Bolt Group
i) Bolts in Shear
ß=(6•z) / (n1•(n1+1)•p1) (6•50) / (5 • (5 + 1)• 70) 0.143
Fv,Rd=αv•fub•A / γM2 0.6 • 800 • 245.0 / 1.25 94.1 kN
VRd=n•[Link]/ √((1+a•n)²+(ß•n)²) (5 • 94.08) / √((1+0.000•5)² + (0.143•5)²) 382.8 kN OK
ii) Fin plate bearing
Vert P1, e1, P2, e2, αb, k1 70.0, 40.0, 0.0, 50.0, 0.606, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γM2 2.5 • 0.606 • 470 • 20 • 8.0 / 1.25 91.2 kN
Horz P1, e1, P2, e2, αb, k1 0.0, 50.0, 70.0, 40.0, 0.758, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γM2 2.5 • 0.758 • 470 • 20 • 8.0 / 1.25 113.9 kN
[Link]=N / √( ((1+a•N) / [Link])² 5.00 / √(((1 + 0.00 • 5.00 ) / 91.15)²
+(ß•N / [Link])²) + (0.14 • 5.00) / 113.94)²) 395.7 kN OK
iii) Beam Web bearing
Vert P1, e1, P2, e2, αb, k1 70.0, 66.0, 0.0, 40.0, 0.811, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γM2 2.5 • 0.811 • 470 • 20 • 8.5 / 1.25 129.5 kN
Horz P1, e1, P2, e2, αb, k1 0.0, 40.0, 70.0, 66.0, 0.606, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γM2 2.5 • 0.606 • 470 • 20 • 8.5 / 1.25 96.8 kN
[Link]=N / √(((1+a•N) / [Link])² 5.00 / √(((1 + 0.00 • 5.00 ) / 129.53)²
+(ß•N / [Link])²) + (0.14 • 5.00) / 96.85)²) 468.3 kN OK
Check 3:Supported Beam - Connecting Elements
i) Shear
VRd.g=(hp•tp/ 1.27)•(fyp/ √3/γM0 ) (360•8/1.27 ) • (355/√3/1.0) 464.8 kN OK
VRd.n=[Link] •fup/√3/γM2net 2000 • 470/√3/1.1 493.4 kN OK
VRd.b=(0.5•fup•Ant /γM2net ) (0.5 • 470 • 312 / 1.1)
+(Fyp•Anv /√3/γM0) + (355 • 1768 / √3/1.0) 429.0 kN OK
ii) Bending
VRd=8 Hp >= 2.73•z n.a. OK
iii) Lateral torsional buckling
VRd=(Wel.P / z)•(FyP/ γM0) (172800 / 50) • (355 / 1.0) 1226.9 kN OK
Check 4: Supported Beam - Resistance at the connection
i) Shear
VRd.G=[Link]•fy.b1 / √3/ γM0 4093.57 • 355.00/√3/1.0 839.0 kN OK
VRd.N=[Link]•fu.b1 / √3 / γM2 3158.57 • 470.00/ √3/1.1 779.2 kN OK
iii) Shear & Bending Interaction of the Beam Web
data [Link], [Link], [Link] 70, 487.80, 61.76
[Link]=fy•tw/6/γM0 •((n1-1)•p1)² (355.00 • 8.50 / 6 / 1.0) •(5-1) • 70)² 39.4 kN.m
[Link]=Ved•Zp 100.00 • 50.00 5.00 kN.m
[Link]=[Link]+[Link]•(n1-1)•p1 39.43 + 69.69 •( 5-1)•70 58.94 kN.m OK
Check 8: Supporting Member Welds
Appendix C.4 Low vertical load - Full strength welds not required
Welds are designed for shear and moment
M=Q•la 100.0 x 50.0 5.0 kN.m
Stress fv=V/D/a/2 100.0/360/4.2 / 2 33.07 N/mm²
Stress fm=M/(a•D²/6)/2 5.0/(4.2 • 360²/6)/2 27.56 N/mm²
[Link]=√(σperp²+3•( τperp²+τparl²)) √(19.5² + 3•(19.5² + 33.1²)) 69.3 N/mm²
[Link]=fu/(Βw• γM2) 470.0 / (0.9 • 1.25) 417.8 N/mm² OK
and σperp<= 0.9•fu/ γM2 19.5 <= 0.9 • 470 / 1.25 338.4 N/mm² OK
Check 10: Supporting Member Local Resistance
i) Local Shear
FRd=2•hp•tp•Fyp/( √3•γM0) 2 • 360 • 14.2 • 355/(√3 • 1.0) 2095.5 kN OK
ii) Punching Shear
t2•fu,2•hp² /(VEd•6•zp•γM2) > 1 14.2 • 470 • 360² / (100.0 • 6 • 50 • 1.1) 26.211>1 OK
Tie Forces
Applied Tie Force 100.0 kN
Check 11: Structural integrity - Fin Plate
i) Tension
Part Block Tension Only 1 Shear Plane
FRd.b=fu.p•Ant/ γMu 470 • 1768 / 1.1
+ fy.p•Anv / √3 / γM0 + 355 • 312 / 1.73 • 1.0 819.4 kN OK
Full Block Tension Only 2 Shear Planes
FRd.b=fu.p•Ant/ γMu 470 • 1536 / 1.1
+ fy.p•Anv / √3 / γM0 + 355 • 624 / 1.73 • 1.0 784.2 kN OK
Full Depth Tension No Shear Planes
FRd.n=0.9•Fu.p•Anet.p / γMu 0.9 • 470 • 2000 / 1.1 769.1 kN OK
ii) Shear
Fv,Rd=αv•fub•A / γMu 0.6 • 800 • 245.0 / 1.1 106.9 kN
FRd=n•Fv,Rd 5 • 106.9 534.5 kN OK
iii) Bearing
P1, e1, P2, e2, αb, k1 0.0, 50.0, 70.0, 40.0, 0.758, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γMu 2.5 • 0.758 • 470 • 20 • 8.0 / 1.1 129.5 kN
FRd=n•Fb,Rd 5 • 129.5 647.4 kN OK
Check 12: Structural integrity - Supported Beam
i) Tension
Part Block Tension Only 1 Shear Plane
FRd.b=Fu.•Ant/ γMu 470 • 2062 / 1.1
+ Fy.B1•Anv / √3 / γM0 + 355 • 247 / 1.73 • 1.0 931.6 kN OK
Full Block Tension Only 2 Shear Planes
FRd.b=Fu.•Ant/ γMu 470 • 1632 / 1.1
+ Fy.B1•Anv / √3 / γM0 + 355 • 493 / 1.73 • 1.0 798.4 kN OK
Full Depth Tension No Shear Planes
FRd.n=0.9•Fu.p•Anet.p / γMu 0.9 • 470 • 2919 / 1.1 1122.5 kN OK
ii) Bearing
P1, e1, P2, e2, αb, k1 0.0, 40.0, 70.0, 40.0, 0.606, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γMu 2.5 • 0.606 • 470 • 20 • 8.5 / 1.1 110.1 kN
FRd=n•Fb,Rd 5 • 110.1 550.3 kN OK

Checks for Flange Beam on Side 2


Check 1: Recommended Detailing Practice
Plate Depth >= 0.6•D 0.6 • 524.7 = 314.8 mm 430 mm OK
Plate thickness check min(tfin 8.0/0.5, tweb 8.9/0.42) / F 0.80 < 1 OK
Check 2: Supported beam - Bolt Group
i) Bolts in Shear
ß=(6•z) / (n1•(n1+1)•p1) (6•50) / (6 • (6 + 1)• 70) 0.102
Fv,Rd=αv•fub•A / γM2 0.6 • 800 • 245.0 / 1.25 94.1 kN
VRd=n•[Link]/ √((1+a•n)²+(ß•n)²) (6 • 94.08) / √((1+0.000•6)² + (0.102•6)²) 481.4 kN OK
ii) Fin plate bearing
Vert P1, e1, P2, e2, αb, k1 70.0, 40.0, 0.0, 50.0, 0.606, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γM2 2.5 • 0.606 • 470 • 20 • 8.0 / 1.25 91.2 kN
Horz P1, e1, P2, e2, αb, k1 0.0, 50.0, 70.0, 40.0, 0.758, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γM2 2.5 • 0.758 • 470 • 20 • 8.0 / 1.25 113.9 kN
[Link]=N / √( ((1+a•N) / [Link])² 6.00 / √(((1 + 0.00 • 6.00 ) / 91.15)²
+(ß•N / [Link])²) + (0.10 • 6.00) / 113.94)²) 491.2 kN OK
iii) Beam Web bearing
Vert P1, e1, P2, e2, αb, k1 70.0, 66.0, 0.0, 40.0, 0.811, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γM2 2.5 • 0.811 • 470 • 20 • 8.9 / 1.25 135.6 kN
Horz P1, e1, P2, e2, αb, k1 0.0, 40.0, 70.0, 66.0, 0.606, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γM2 2.5 • 0.606 • 470 • 20 • 8.9 / 1.25 101.4 kN
[Link]=N / √(((1+a•N) / [Link])² 6.00 / √(((1 + 0.00 • 6.00 ) / 135.63)²
+(ß•N / [Link])²) + (0.10 • 6.00) / 101.41)²) 629.6 kN OK
Check 3:Supported Beam - Connecting Elements
i) Shear
VRd.g=(hp•tp/ 1.27)•(fyp/ √3/γM0 ) (430•8/1.27 ) • (355/√3/1.0) 555.2 kN OK
VRd.n=[Link] •fup/√3/γM2net 2384 • 470/√3/1.1 588.1 kN OK
VRd.b=(0.5•fup•Ant /γM2net ) (0.5 • 470 • 312 / 1.1)
+(Fyp•Anv /√3/γM0) + (355 • 2152 / √3/1.0) 507.7 kN OK
ii) Bending
VRd=8 Hp >= 2.73•z n.a. OK
iii) Lateral torsional buckling
VRd=(Wel.P / z)•(FyP/ γM0) (246533 / 50) • (355 / 1.0) 1750.4 kN OK
Check 4: Supported Beam - Resistance at the connection
i) Shear
VRd.G=[Link]•fy.b1 / √3/ γM0 4995.74 • 355.00/√3/1.0 1023.9 kN OK
VRd.N=[Link]•fu.b1 / √3 / γM2 3820.94 • 470.00/ √3/1.1 942.6 kN OK
iii) Shear & Bending Interaction of the Beam Web
data [Link], [Link], [Link] 73, 638.45, 66.70
[Link]=fy•tw/6/γM0 •((n1-1)•p1)² (355.00 • 8.90 / 6 / 1.0) •(6-1) • 70)² 64.5 kN.m
[Link]=Ved•Zp 100.00 • 50.00 5.00 kN.m
[Link]=[Link]+[Link]•(n1-1)•p1 64.51 + 72.97 •( 6-1)•70 90.04 kN.m OK
Check 8: Supporting Member Welds
Appendix C.4 Low vertical load - Full strength welds not required
Welds are designed for shear and moment
M=Q•la 100.0 x 50.0 5.0 kN.m
Stress fv=V/D/a/2 100.0/430/4.2 / 2 27.69 N/mm²
Stress fm=M/(a•D²/6)/2 5.0/(4.2 • 430²/6)/2 19.32 N/mm²
[Link]=√(σperp²+3•( τperp²+τparl²)) √(13.7² + 3•(13.7² + 27.7²)) 55.2 N/mm²
[Link]=fu/(Βw• γM2) 470.0 / (0.9 • 1.25) 417.8 N/mm² OK
and σperp<= 0.9•fu/ γM2 13.7 <= 0.9 • 470 / 1.25 338.4 N/mm² OK
Check 10: Supporting Member Local Resistance
i) Local Shear
FRd=2•hp•tp•Fyp/( √3•γM0) 2 • 430 • 14.2 • 355/(√3 • 1.0) 2503.0 kN OK
ii) Punching Shear
t2•fu,2•hp² /(VEd•6•zp•γM2) > 1 14.2 • 470 • 430² / (100.0 • 6 • 50 • 1.1) 37.395>1 OK
Tie Forces
Applied Tie Force 100.0 kN
Check 11: Structural integrity - Fin Plate
i) Tension
Part Block Tension Only 1 Shear Plane
FRd.b=fu.p•Ant/ γMu 470 • 2152 / 1.1
+ fy.p•Anv / √3 / γM0 + 355 • 312 / 1.73 • 1.0 983.4 kN OK
Full Block Tension Only 2 Shear Planes
FRd.b=fu.p•Ant/ γMu 470 • 1920 / 1.1
+ fy.p•Anv / √3 / γM0 + 355 • 624 / 1.73 • 1.0 948.3 kN OK
Full Depth Tension No Shear Planes
FRd.n=0.9•Fu.p•Anet.p / γMu 0.9 • 470 • 2384 / 1.1 916.8 kN OK
ii) Shear
Fv,Rd=αv•fub•A / γMu 0.6 • 800 • 245.0 / 1.1 106.9 kN
FRd=n•Fv,Rd 6 • 106.9 641.5 kN OK
iii) Bearing
P1, e1, P2, e2, αb, k1 0.0, 50.0, 70.0, 40.0, 0.758, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γMu 2.5 • 0.758 • 470 • 20 • 8.0 / 1.1 129.5 kN
FRd=n•Fb,Rd 6 • 129.5 776.9 kN OK
Check 12: Structural integrity - Supported Beam
i) Tension
Part Block Tension Only 1 Shear Plane
FRd.b=Fu.•Ant/ γMu 470 • 2577 / 1.1
+ Fy.B1•Anv / √3 / γM0 + 355 • 258 / 1.73 • 1.0 1153.8 kN OK
Full Block Tension Only 2 Shear Planes
FRd.b=Fu.•Ant/ γMu 470 • 2136 / 1.1
+ Fy.B1•Anv / √3 / γM0 + 355 • 516 / 1.73 • 1.0 1018.5 kN OK
Full Depth Tension No Shear Planes
FRd.n=0.9•Fu.p•Anet.p / γMu 0.9 • 470 • 3495 / 1.1 1344.0 kN OK
ii) Bearing
P1, e1, P2, e2, αb, k1 0.0, 40.0, 70.0, 40.0, 0.606, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γMu 2.5 • 0.606 • 470 • 20 • 8.9 / 1.1 115.2 kN
FRd=n•Fb,Rd 6 • 115.2 691.4 kN OK
Checks for Web Beam on Side 1
Check 1: Recommended Detailing Practice
Plate Depth >= 0.6•D 0.6 • 453.4 = 272 mm 360 mm OK
Plate thickness check min(tfin 8.0/0.5, tweb 8.5/0.42) / F 0.80 < 1 OK
Check 2: Supported beam - Bolt Group
i) Bolts in Shear
ß=(6•z) / (n1•(n1+1)•p1) (6•50) / (5 • (5 + 1)• 70) 0.143
Fv,Rd=αv•fub•A / γM2 0.6 • 800 • 245.0 / 1.25 94.1 kN
VRd=n•[Link]/ √((1+a•n)²+(ß•n)²) (5 • 94.08) / √((1+0.000•5)² + (0.143•5)²) 382.8 kN OK
ii) Fin plate bearing
Vert P1, e1, P2, e2, αb, k1 70.0, 40.0, 0.0, 50.0, 0.606, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γM2 2.5 • 0.606 • 470 • 20 • 8.0 / 1.25 91.2 kN
Horz P1, e1, P2, e2, αb, k1 0.0, 50.0, 70.0, 40.0, 0.758, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γM2 2.5 • 0.758 • 470 • 20 • 8.0 / 1.25 113.9 kN
[Link]=N / √( ((1+a•N) / [Link])² 5.00 / √(((1 + 0.00 • 5.00 ) / 91.15)²
+(ß•N / [Link])²) + (0.14 • 5.00) / 113.94)²) 395.7 kN OK
iii) Beam Web bearing
Vert P1, e1, P2, e2, αb, k1 70.0, 74.0, 0.0, 40.0, 0.811, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γM2 2.5 • 0.811 • 470 • 20 • 8.5 / 1.25 129.5 kN
Horz P1, e1, P2, e2, αb, k1 0.0, 40.0, 70.0, 74.0, 0.606, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γM2 2.5 • 0.606 • 470 • 20 • 8.5 / 1.25 96.8 kN
[Link]=N / √(((1+a•N) / [Link])² 5.00 / √(((1 + 0.00 • 5.00 ) / 129.53)²
+(ß•N / [Link])²) + (0.14 • 5.00) / 96.85)²) 468.3 kN OK
Check 3:Supported Beam - Connecting Elements
i) Shear
VRd.g=(hp•tp/ 1.27)•(fyp/ √3/γM0 ) (360•8/1.27 ) • (355/√3/1.0) 464.8 kN OK
VRd.n=[Link] •fup/√3/γM2net 2000 • 470/√3/1.1 493.4 kN OK
VRd.b=(0.5•fup•Ant /γM2net ) (0.5 • 470 • 312 / 1.1)
+(Fyp•Anv /√3/γM0) + (355 • 1768 / √3/1.0) 429.0 kN OK
ii) Bending
VRd=8 Hp >= 2.73•z n.a. OK
iii) Lateral torsional buckling
VRd=(Wel.P / z)•(FyP/ γM0) (172800 / 50) • (355 / 1.0) 1226.9 kN OK
Check 4: Supported Beam - Resistance at the connection
i) Shear
VRd.G=[Link]•fy.b1 / √3/ γM0 4093.57 • 355.00/√3/1.0 839.0 kN OK
VRd.N=[Link]•fu.b1 / √3 / γM2 3158.57 • 470.00/ √3/1.1 779.2 kN OK
iii) Shear & Bending Interaction of the Beam Web
data [Link], [Link], [Link] 70, 487.80, 61.76
[Link]=fy•tw/6/γM0 •((n1-1)•p1)² (355.00 • 8.50 / 6 / 1.0) •(5-1) • 70)² 39.4 kN.m
[Link]=Ved•Zp 100.00 • 50.00 5.00 kN.m
[Link]=[Link]+[Link]•(n1-1)•p1 39.43 + 69.69 •( 5-1)•70 58.94 kN.m OK
Check 8: Supporting Member Welds
Appendix C.4 Low vertical load - Full strength welds not required
Welds are designed for shear and moment
M=Q•la 100.0 x 50.0 5.0 kN.m
Stress fv=V/D/a/2 100.0/360/4.2 / 2 33.07 N/mm²
Stress fm=M/(a•D²/6)/2 5.0/(4.2 • 360²/6)/2 27.56 N/mm²
[Link]=√(σperp²+3•( τperp²+τparl²)) √(19.5² + 3•(19.5² + 33.1²)) 69.3 N/mm²
[Link]=fu/(Βw• γM2) 470.0 / (0.9 • 1.25) 417.8 N/mm² OK
and σperp<= 0.9•fu/ γM2 19.5 <= 0.9 • 470 / 1.25 338.4 N/mm² OK
Check 10: Supporting Member Local Resistance
Wall d/t dim check d/t = 23.3 < 40ε = 32.5 OK
i) Combined Shear
[Link]=( VEd.1 / hp.1+ VEd.2 / hp.2 )•[Link] (100.0 / 360 + 100.0 / 500) • 360 172.0 kN
FRd=2•[Link]•T2•fy.2 / ( √3•γM0) 2 • 360 • 8.6 • 355/(√3 • 1.0) 1269.1 kN OK
Tie Forces
Applied Tie Force 100.0 kN
Check 11: Structural integrity - Fin Plate
i) Tension
Part Block Tension Only 1 Shear Plane
FRd.b=fu.p•Ant/ γMu 470 • 1768 / 1.1
+ fy.p•Anv / √3 / γM0 + 355 • 312 / 1.73 • 1.0 819.4 kN OK
Full Block Tension Only 2 Shear Planes
FRd.b=fu.p•Ant/ γMu 470 • 1536 / 1.1
+ fy.p•Anv / √3 / γM0 + 355 • 624 / 1.73 • 1.0 784.2 kN OK
Full Depth Tension No Shear Planes
FRd.n=0.9•Fu.p•Anet.p / γMu 0.9 • 470 • 2000 / 1.1 769.1 kN OK
ii) Shear
Fv,Rd=αv•fub•A / γMu 0.6 • 800 • 245.0 / 1.1 106.9 kN
FRd=n•Fv,Rd 5 • 106.9 534.5 kN OK
iii) Bearing
P1, e1, P2, e2, αb, k1 0.0, 50.0, 70.0, 40.0, 0.758, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γMu 2.5 • 0.758 • 470 • 20 • 8.0 / 1.1 129.5 kN
FRd=n•Fb,Rd 5 • 129.5 647.4 kN OK
Check 12: Structural integrity - Supported Beam
i) Tension
Part Block Tension Only 1 Shear Plane
FRd.b=Fu.•Ant/ γMu 470 • 1994 / 1.1
+ Fy.B1•Anv / √3 / γM0 + 355 • 247 / 1.73 • 1.0 902.5 kN OK
Full Block Tension Only 2 Shear Planes
FRd.b=Fu.•Ant/ γMu 470 • 1632 / 1.1
+ Fy.B1•Anv / √3 / γM0 + 355 • 493 / 1.73 • 1.0 798.4 kN OK
Full Depth Tension No Shear Planes
FRd.n=0.9•Fu.p•Anet.p / γMu 0.9 • 470 • 2919 / 1.1 1122.5 kN OK
ii) Bearing
P1, e1, P2, e2, αb, k1 0.0, 40.0, 70.0, 40.0, 0.606, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γMu 2.5 • 0.606 • 470 • 20 • 8.5 / 1.1 110.1 kN
FRd=n•Fb,Rd 5 • 110.1 550.3 kN OK

Checks for Web Beam on Side 2


Check 1: Recommended Detailing Practice
Plate Depth >= 0.6•D 0.6 • 612.2 = 367.3 mm 500 mm OK
Plate thickness check min(tfin 8.0/0.5, tweb 11.9/0.42) / F 0.80 < 1 OK
Check 2: Supported beam - Bolt Group
i) Bolts in Shear
ß=(6•z) / (n1•(n1+1)•p1) (6•50) / (7 • (7 + 1)• 70) 0.077
Fv,Rd=αv•fub•A / γM2 0.6 • 800 • 245.0 / 1.25 94.1 kN
VRd=n•[Link]/ √((1+a•n)²+(ß•n)²) (7 • 94.08) / √((1+0.000•7)² + (0.077•7)²) 580.5 kN OK
ii) Fin plate bearing
Vert P1, e1, P2, e2, αb, k1 70.0, 40.0, 0.0, 50.0, 0.606, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γM2 2.5 • 0.606 • 470 • 20 • 8.0 / 1.25 91.2 kN
Horz P1, e1, P2, e2, αb, k1 0.0, 50.0, 70.0, 40.0, 0.758, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γM2 2.5 • 0.758 • 470 • 20 • 8.0 / 1.25 113.9 kN
[Link]=N / √( ((1+a•N) / [Link])² 7.00 / √(((1 + 0.00 • 7.00 ) / 91.15)²
+(ß•N / [Link])²) + (0.08 • 7.00) / 113.94)²) 586.5 kN OK
iii) Beam Web bearing
Vert P1, e1, P2, e2, αb, k1 70.0, 74.0, 0.0, 40.0, 0.811, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γM2 2.5 • 0.811 • 470 • 20 • 11.9 / 1.25 181.3 kN
Horz P1, e1, P2, e2, αb, k1 0.0, 40.0, 70.0, 74.0, 0.606, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γM2 2.5 • 0.606 • 470 • 20 • 11.9 / 1.25 135.6 kN
[Link]=N / √(((1+a•N) / [Link])² 7.00 / √(((1 + 0.00 • 7.00 ) / 181.35)²
+(ß•N / [Link])²) + (0.08 • 7.00) / 135.59)²) 1031.9 kN OK
Check 3:Supported Beam - Connecting Elements
i) Shear
VRd.g=(hp•tp/ 1.27)•(fyp/ √3/γM0 ) (500•8/1.27 ) • (355/√3/1.0) 645.5 kN OK
VRd.n=[Link] •fup/√3/γM2net 2768 • 470/√3/1.1 682.8 kN OK
VRd.b=(0.5•fup•Ant /γM2net ) (0.5 • 470 • 312 / 1.1)
+(Fyp•Anv /√3/γM0) + (355 • 2536 / √3/1.0) 586.4 kN OK
ii) Bending
VRd=8 Hp >= 2.73•z n.a. OK
iii) Lateral torsional buckling
VRd=(Wel.P / z)•(FyP/ γM0) (333333 / 50) • (355 / 1.0) 2366.7 kN OK
Check 4: Supported Beam - Resistance at the connection
i) Shear
VRd.G=[Link]•fy.b1 / √3/ γM0 7687.28 • 355.00/√3/1.0 1575.6 kN OK
VRd.N=[Link]•fu.b1 / √3 / γM2 5854.68 • 470.00/ √3/1.1 1444.3 kN OK
iii) Shear & Bending Interaction of the Beam Web
data [Link], [Link], [Link] 95, 995.53, 68.61
[Link]=fy•tw/6/γM0 •((n1-1)•p1)² (345.00 • 11.90 / 6 / 1.0) •(7-1) • 70)² 120.7 kN.m
[Link]=Ved•Zp 100.00 • 50.00 5.00 kN.m
[Link]=[Link]+[Link]•(n1-1)•p1 120.70 + 94.81 •( 7-1)•70 160.52 kN.m OK
Check 8: Supporting Member Welds
Appendix C.4 Low vertical load - Full strength welds not required
Welds are designed for shear and moment
M=Q•la 100.0 x 50.0 5.0 kN.m
Stress fv=V/D/a/2 100.0/500/4.2 / 2 23.81 N/mm²
Stress fm=M/(a•D²/6)/2 5.0/(4.2 • 500²/6)/2 14.29 N/mm²
[Link]=√(σperp²+3•( τperp²+τparl²)) √(10.1² + 3•(10.1² + 23.8²)) 45.9 N/mm²
[Link]=fu/(Βw• γM2) 470.0 / (0.9 • 1.25) 417.8 N/mm² OK
and σperp<= 0.9•fu/ γM2 10.1 <= 0.9 • 470 / 1.25 338.4 N/mm² OK
Check 10: Supporting Member Local Resistance
Wall d/t dim check d/t = 23.3 < 40ε = 32.5 OK
Tie Forces
Applied Tie Force 100.0 kN
Check 11: Structural integrity - Fin Plate
i) Tension
Part Block Tension Only 1 Shear Plane
FRd.b=fu.p•Ant/ γMu 470 • 2536 / 1.1
+ fy.p•Anv / √3 / γM0 + 355 • 312 / 1.73 • 1.0 1147.5 kN OK
Full Block Tension Only 2 Shear Planes
FRd.b=fu.p•Ant/ γMu 470 • 2304 / 1.1
+ fy.p•Anv / √3 / γM0 + 355 • 624 / 1.73 • 1.0 1112.3 kN OK
Full Depth Tension No Shear Planes
FRd.n=0.9•Fu.p•Anet.p / γMu 0.9 • 470 • 2768 / 1.1 1064.4 kN OK
ii) Shear
Fv,Rd=αv•fub•A / γMu 0.6 • 800 • 245.0 / 1.1 106.9 kN
FRd=n•Fv,Rd 7 • 106.9 748.4 kN OK
iii) Bearing
P1, e1, P2, e2, αb, k1 0.0, 50.0, 70.0, 40.0, 0.758, 2.500
Fb,Rd=k1• αb•fu,p •d•tp/ γMu 2.5 • 0.758 • 470 • 20 • 8.0 / 1.1 129.5 kN
FRd=n•Fb,Rd 7 • 129.5 906.3 kN OK
Check 12: Structural integrity - Supported Beam
i) Tension
Part Block Tension Only 1 Shear Plane
FRd.b=Fu.•Ant/ γMu 470 • 3934 / 1.1
+ Fy.B1•Anv / √3 / γM0 + 345 • 345 / 1.73 • 1.0 1749.7 kN OK
Full Block Tension Only 2 Shear Planes
FRd.b=Fu.•Ant/ γMu 470 • 3427 / 1.1
+ Fy.B1•Anv / √3 / γM0 + 345 • 690 / 1.73 • 1.0 1601.8 kN OK
Full Depth Tension No Shear Planes
FRd.n=0.9•Fu.p•Anet.p / γMu 0.9 • 470 • 5453 / 1.1 2096.8 kN OK
ii) Bearing
P1, e1, P2, e2, αb, k1 0.0, 40.0, 70.0, 40.0, 0.606, 2.500
Fb,Rd=k1• αb•fu•d•tp/ γMu 2.5 • 0.606 • 470 • 20 • 11.9 / 1.1 154.1 kN
FRd=n•Fb,Rd 7 • 154.1 1078.5 kN OK

You might also like