Scribd
Upload
342 views6 pages

Power Pulse System Removal Guide

This document provides a detailed procedure for the removal of the Power Pulse Compressor (D4204T23) from a vehicle. It includes steps such as depressurizing the system, disconnecting connectors, and removing various components with specified torque values. The installation process is simply the reverse of the removal steps outlined.

Uploaded by

kallatis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
342 views6 pages

Power Pulse System Removal Guide

This document provides a detailed procedure for the removal of the Power Pulse Compressor (D4204T23) from a vehicle. It includes steps such as depressurizing the system, disconnecting connectors, and removing various components with specified torque values. The installation process is simply the reverse of the removal steps outlined.

Uploaded by

kallatis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

7/29/25, 2:17 PM Power Pulse Compressor - (D4204T23) [VCC-489337-1]

Image Philosophy, General Manual Information and Symbols

For additional information on image/symbol definitions and general manual notes. Click here

Operation number: 25551-2

Power Pulse Compressor


Removal

Hint:
Removal steps in this procedure may contain installation details.

Depressurise the Power Pulse system in accordance with: Diagnostics / Components / Control modules / Engine
Control Module (ECM) / Diagnostic Sequences / Power Pulse

Remove right headlight Refer to: Headlamps

Disconnect the connectors.

Fold marked part aside.

[Link] 1/6
7/29/25, 2:17 PM Power Pulse Compressor - (D4204T23) [VCC-489337-1]

Depress the locking device.

Undo the hose from the connection.

Fold marked part aside.

Remove the nuts.

Torque: M6, 10 Nm

[Link] 2/6
7/29/25, 2:17 PM Power Pulse Compressor - (D4204T23) [VCC-489337-1]

Loosen the hose clamp.

Fold marked part aside.

Remove the screws.

Torque: M6, 10 Nm

[Link] 3/6
7/29/25, 2:17 PM Power Pulse Compressor - (D4204T23) [VCC-489337-1]

Remove the marked part.

Remove the screw.

Fold marked part aside.

[Link] 4/6
7/29/25, 2:17 PM Power Pulse Compressor - (D4204T23) [VCC-489337-1]

Remove the nuts.

Remove the marked detail/details.

Note position of components.

Disconnect the connector.

Fold marked part aside.

[Link] 5/6
7/29/25, 2:17 PM Power Pulse Compressor - (D4204T23) [VCC-489337-1]

Remove the marked part.

Installation

To install, reverse the removal procedure.

[Link] 6/6

You might also like