(G+F+R) MOSQUE RUWAA ZONE

RIYADH, KSA

F-05BT 30 Watt outdoor Loud Speaker

A. Rated Power :30W

B. Power tapping: 30/15/7.5 W
C. Frequency range: 80HZ-20KHz
E. Relative humidity: ˂ 95%
F. Material: Waterproof

TC-651M 50 Watt horn

A. Rated Power :50W

B. Power tapping: 50/25/12.5 W
C. Frequency range: 400Hz to 8Khz
E. Relative humidity: ˂ 95%
F. Material: Waterproof

F-08BT 60 Watt outdoor Loud Speaker

A. Rated Power :60W

B. Power tapping: 60/25/12.5 W
C. Frequency range: 60HZ-20KHz
E. Relative humidity: ˂ 95%
F. Material: Waterproof

DA-250DH AMPLIFIERS

The main amplifier is to be of modular construction with the following specification:

Output power Nominal, maximum and peak outputs shall be as required to meet load demand
according to the number of output point.

60W, 120W or 240W and 480W Power rating

Output Regulation 100V line, <2dB-no load to full load.
Frequency Response 50 Hz - 18KHz, 100V LINE.
Total harmonic distortion <0.1%at l KHz. 775mV
Sensitivity Power (green)
LED Indication Signal (green)
Fault (amber)

BACKGROUND MUSIC SYSTEM 275116

686 of 762
 Datasheet

F-05BT
SPEAKER SYSTEM

F-05BT is a 2-way surface-mount speaker system

designed to deliver high-quality audio for a variety of
applications. This versatility makes it ideal for foreground
or background music playback, as well as public
address announcements. The F-05BT boasts a sleek
aesthetic that seamlessly integrates with walls and
ceilings hardware incorporates a temporary hanging
feature, allowing for easy and secure single-handed
installation with effortless wiring and angle adjustments.

Key features
• Versatile 5-inch 2-way surface-mount speaker system
• Perfect for music and announcements
• Sleek design for seamless integration with walls and ceilings
• Safe and easy installations with included mounting bracket
• Temporary docking feature allows effortless wiring and positioning
• Flexible angle adjustment for both wall and ceiling mounts
• Ideal for permanent installs or portable setups

1
 F-05BT | Datasheet

Specifications

Enclosure Bass-reflex type

Rated Input 30 W (100 V line, 70 V line)

Power Handling Rated noise power: 60 W (8 Ω)

Continuous program: 120 W (8 Ω)

Rated Impedance 8Ω
100 V line: 330 Ω (30 W), 1 kΩ (10 W), 3.3 kΩ (3 W), 10 kΩ (1 W)
70 V line: 170 Ω (30 W), 330 Ω (15 W), 1 kΩ (5 W), 3.3 kΩ (1.5 W),10 kΩ (0.5 W)

Sensitivity 90 dB (1 W, 1 m) at installation in 1/2 free sound field

Frequency Response 60 Hz - 20 kHz, –10 dB at installation in 1/2 free sound field

Crossover Frequency 4.5 kHz

Directivity Angle Horizontal: 100°, Vertical: 100°

Speaker Component Low frequency: 13 cm (5") PP cone-type

High frequency: 25 mm (1") dome tweeter

Input Terminal Push-in Terminal

Installation Environment Indoor installation

Operating Temperature -10 °C to +50 °C (14 °F to 122 °F)

Finish Enclosure: HIPS, black (RAL 9011 equivalent), paint

Grille: Aluminum, black (RAL 9011 equivalent), paint
Speaker bracket: Die-cast aluminum, black (RAL 9011 equivalent), paint
Base bracket: Steel plate, t4, black (RAL 9011 equivalent), paint
Base bracket cover: HIPS, black (RAL 9011 equivalent)

Dimensions 162 (W) x 274 (H) x 164 (D) mm (6.38" x 10.79" x 6.46")

Weight 2.7 kg (5.95 lb)

Included Accessories Speaker bracket x 1, Base bracket x 1, Base bracket cover x 1, Bracket fixing screw x 1 set

Optional Accessories Adapter plate: HY-F05B

Speaker stand: ST-34B Note: K&M 19780 or K&M 19610 is required.

(*1) Rated noise power is defined by IEC60268-5. Continuous program is 3 dB above Rated noise power.
Note: Bolts and nuts for mounting the bracket to the wall or ceiling are not included. Prepare them separately.

2
Published on 2025/07/02
 F-05BT | Datasheet

Dimensions

3
Published on 2025/07/02
 F-05BT | Datasheet

Dimensions

4
Published on 2025/07/02
 F-05BT | Datasheet

A&E specifications
The speaker shall be a 2-way, bass-reflex type enclosure suitable for ceiling or wall mounting. The low-frequency driver shall be
a 13 cm (5") polypropylene (PP) cone-type, and the high-frequency driver shall be a 25 mm (1") dome tweeter. The speaker shall
have a rated noise power handling capacity of 60 W (8 Ω) and a continuous program power capacity of 120 W (8 Ω). The rated
input for the speaker shall be 30 W when connected to 100 V or 70 V line systems. The speaker shall offer multiple tap settings,
including 330 Ω (30 W), 1 kΩ (10 W), 3.3 kΩ (3 W), and 10 kΩ (1 W) for the 100 V line, and 170 Ω (30 W), 330 Ω (15 W), 1 kΩ
(5 W), 3.3 kΩ (1.5 W), and 10 kΩ (0.5 W) for the 70 V line. The impedance shall be 8 Ω for direct [Link] speaker shall
have a sensitivity of 90 dB at 1 W, measured at 1 m distance in a 1/2 free sound field. The frequency response of the speaker
shall range from 60 Hz to 20 kHz, with a -10 dB variance in a 1/2 free sound field. The crossover frequency shall be 4.5 kHz.
The directivity angle of the speaker shall be 100° horizontally and 100° vertically, ensuring broad coverage for optimal sound
[Link] enclosure shall be constructed of high-impact polystyrene (HIPS) and finished in either black or white. The grille
shall be made of aluminum and finished to match the enclosure color. The mounting bracket and base bracket shall be made of
die-cast aluminum and steel plate respectively, both painted to match the enclosure finish. The base bracket shall support the
mounting bracket that is attached to the enclosure and allow for temporary positioning without fixing the nut, facilitating two-
handed wiring work. The speaker shall be equipped with push-in terminal for input [Link] speaker shall be designed
for indoor installation and be capable of operating in a temperature range from -10°C to +50°C (14°F to 122°F). The overall
dimensions of the speaker shall be 162 mm (W) x 274 mm (H) x 164 mm (D) (6.38" x 10.79" x 6.46"), and the weight shall be
2.7 kg (5.95 lbs.).Included accessories shall consist of one speaker bracket, one base bracket, one base bracket cover, and one
set of bracket fixing [Link] extras:
Adapter Plate: HY-F05B/ HY-F05W
Speaker Stand: ST-34B with compatibility for K&M 19780 or K&M 19610 stands
manufactured by TOA [Link]: TOA Corporation
Model: F-05BT/ F-05WT

Specifications are subject to change without notice. 5

Published on 2025/07/02
 Datasheet

F-08BT
SPEAKER SYSTEM

F-08BT is a 2-way surface-mount speaker system

designed to deliver high-quality audio for a variety of
applications. This versatility makes it ideal for foreground
or background music playback, as well as public
address announcements. The F-08BT boasts a sleek
aesthetic that seamlessly integrates with walls and
ceilings hardware incorporates a temporary hanging
feature, allowing for easy and secure single-handed
installation with effortless wiring and angle adjustments.

Key features
• Versatile 8-inch 2-way surface-mount speaker system
• Perfect for music and announcements
• Sleek design for seamless integration with walls and ceilings
• Safe and easy installations with included mounting bracket
• Temporary docking feature allows effortless wiring and positioning
• Flexible angle adjustment for both wall and ceiling mounts
• Ideal for permanent installs or portable setups

1
 F-08BT | Datasheet

Specifications

Enclosure Bass-reflex type

Rated Input 60 W (100 V line, 70 V line)

Power Handling Rated noise power: 90 W (8 Ω)

Continuous program: 180 W (8 Ω)

Rated Impedance 8Ω
100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 3.3 kΩ (3 W)
70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 3.3 kΩ (1.5 W)

Sensitivity 91 dB (1 W, 1 m) at installation in 1/2 free sound field

Frequency Response 50 Hz - 20 kHz, –10 dB at installation in 1/2 free sound field

Crossover Frequency 3 kHz

Directivity Angle Horizontal: 100°, Vertical: 100°

Speaker Component Low frequency: 20 cm (8") PP cone-type

High frequency: 25 mm (1") dome tweeter

Input Terminal Push-in Terminal

Installation Environment Indoor installation

Operating Temperature -10 °C to +50 °C (14 °F to 122 °F)

Finish Enclosure: HIPS, black (RAL 9011 equivalent), paint

Grille: Aluminum, black (RAL 9011 equivalent), paint
Speaker bracket: Die-cast aluminum, black (RAL 9011 equivalent), paint
Base bracket: Steel plate, t4.5, black (RAL 9011 equivalent), paint
Base bracket cover: HIPS, black (RAL 9011 equivalent)

Dimensions 251 (W) x 392 (H) x 216 (D) mm (9.88" x 15.43" x 8.5")

Weight 5.2 kg (11.46 lb)

Included Accessories Speaker bracket x 1, Base bracket x 1, Base bracket cover x 1, Bracket fixing screw x 1 set

Optional Accessories Adapter plate: HY-F08B

Speaker stand: ST-34B Note: K&M 19780 or K&M 19610 is required.

(*1) Rated noise power is defined by IEC60268-5. Continuous program is 3 dB above Rated noise power.
Note: Bolts and nuts for mounting the bracket to the wall or ceiling are not included. Prepare them separately.

2
Published on 2025/07/02
 F-08BT | Datasheet

Dimensions

3
Published on 2025/07/02
 F-08BT | Datasheet

Dimensions

4
Published on 2025/07/02
 F-08BT | Datasheet

A&E specifications
The speaker shall be a 2-way, bass-reflex type enclosure suitable for ceiling or wall mounting. The low-frequency driver shall
be a 20 cm (8") polypropylene (PP) cone-type, and the high-frequency driver shall be a 25 mm (1") dome tweeter. The speaker
shall have a rated noise power handling capacity of 90 W (8 Ω) and a continuous program power capacity of 180 W (8 Ω). The
rated input for the speaker shall be 60 W when connected to 100 V or 70 V line systems. The speaker shall offer multiple tap
settings, including 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), and 3.3 kΩ (3 W) for the 100 V line, and 83 Ω (60 W), 170 Ω (30
W), 330 Ω (15 W), 670 Ω (7.5 W), and 3.3 kΩ (1.5 W) for the 70 V line. The impedance shall be 8 Ω for direct [Link]
speaker shall have a sensitivity of 91 dB at 1 W, measured at 1 m distance in a 1/2 free sound field. The frequency response
of the speaker shall range from 50 Hz to 20 kHz, with a -10 dB variance in a 1/2 free sound field. The crossover frequency
shall be 3 kHz. The directivity angle of the speaker shall be 100° horizontally and 100° vertically, ensuring broad coverage for
optimal sound [Link] enclosure shall be constructed of high-impact polystyrene (HIPS) and finished in either black or
white. The grille shall be made of aluminum and finished to match the enclosure color. The mounting bracket and base bracket
shall be made of die-cast aluminum and steel plate respectively, both painted to match the enclosure finish. The base bracket
shall support the mounting bracket that is attached to the enclosure and allow for temporary positioning without fixing the nut,
facilitating two-handed wiring work. The speaker shall be equipped with push-in terminal for input [Link] speaker shall
be designed for indoor installation and be capable of operating in a temperature range from -10°C to +50°C (14°F to 122°F). The
overall dimensions of the speaker shall be 251 mm (W) x 392 mm (H) x 216 mm (D) (9.88" x 15.43" x 8.5"), and the weight shall
be 5.2 kg (11.46 lbs.).Included accessories shall consist of one speaker bracket, one base bracket, one base bracket cover, and
one set of bracket fixing [Link] extras:
Adapter Plate: HY-F08B/ HY-F08W
Speaker Stand: ST-34B with compatibility for K&M 19780 or K&M 19610 stands
manufactured by TOA [Link]: TOA Corporation
Model: F-08BT/ F-08WT

Specifications are subject to change without notice. 5

Published on 2025/07/02
 Datasheet

SC-651
PAGING HORN SPEAKER

The SC-651 is a compact, highly intelligible speaker

suited to public address announcement applications.
Its external speaker component finished with powder
coating, and stainless steel screws ensure the unit's
weatherproof capability.

Key features
• Anti-shock construction
• High sound pressure level
• Including 600 mm cable

1
 SC-651 | Datasheet

Specifications

Rated Input 50 W (Mobile Mount use: 30 W)

Rated Impedance 16 Ω

Sensitivity 109 dB (1 W, 1 m)

Frequency Response 250 Hz - 6 kHz

Polarity Hot: Black, Com: White

Dust/Water Protection IP65

Operating Temperature -20 °C to +55 °C (-4 °F to 131 °F)(must be free from dew condensation)

Finish Horn flare: Aluminum, off-white, powder coating

Reflector horn: ABS resin, off-white
Bracket holder: Aluminum, gray, powder coating
Bracket: Steel, gray, powder coating
Rear cover: ABS resin, gray
Screws and bolts: Stainless steel
Speaker cable: Polyvinyl chloride insulated cabtyre cable
(6 mm (0.24) in diameter

Dimensions 430 (W) x 297.5 (H) x 327 (D) mm (16.93 x 11.71" x 12.87")

Weight 3.4 kg (7.5 lb)

Note: Avoid installing the speaker in locations which vibrate considerably or under environments easy to be oil-contaminated.

2
Published on 2025/04/16
 SC-651 | Datasheet

Dimensions

Specifications are subject to change without notice. 3

Published on 2025/04/16
 Datasheet

TC-651M
REFLEX HORN SPEAKER

The TC-651M is a highly intelligible, general-purpose

speaker suited to public address announcement
applications. Its external speaker component finished
with powder coating, and stainless steel screws ensure
the unit's weatherproof capability.

Key features
• High Intelligibility
• Weatherproof for outdoor application
• Stainless steel hardware (screws, bolts, nuts), and powder-coated horn and bracket ensure superb
• weatherproofing and corrosion-resistance
• Shock-resistant aluminum round horn
• With 600 mm cable

1
 TC-651M | Datasheet

Specifications

Rated Input 50 W

Rated Impedance 100 V line: 200 Ω (50 W), 330 Ω (30 W), 670 Ω (15 W)
70 V line: 100 Ω (50 W), 200 Ω (25 W), 330 Ω (15 W), 670 Ω (7.5 W)

Sensitivity 111 dB (1 W, 1 m)

Frequency Response 200 Hz - 6 kHz

Polarity Hot: Black, Com: White

Dust/Water Protection IP65

Operating Temperature -20 °C to +60 °C (-4 °F to 140 °F) (must be free from dew condensation)

Finish Horn flare: Aluminum, off-white, powder coating

Reflector horn: ABS resin, off-white
Bracket holder: Aluminum, white, powder coating
Bracket: Steel, gray, powder coating
Rear cover: ABS resin, gray
Screw and bolts: Stainless steel
Speaker Cable: Polyvinyl chloride insulated cabtyre cable
(6 mm (0.24) in diameter

Dimensions Ø400 (W) x 376 (D) mm (Ø15.75 x 14.8")

Weight 4 kg (8.82 lb)

Note: Avoid installing the speaker in locations which vibrate considerably or under environments easy to be oil-contaminated.

2
Published on 2025/04/16
 TC-651M | Datasheet

Dimensions
CAUTION
NEVER SET THE SWITCH TO " " POSITION
FOR 100 V LINE OPERATION, AS DOING SO MAY
RESULT IN DAMAGE TO THE SPEAKER.

159 [6.26"]
LINE VOLTAGE
670 70 V 100 V IMP.
BLK
330 16 50 W 100
200 OFF
OFF
25 W 50 W 200
100
15 W 30 W 330
Rear View WHT 0
7.5 W 15 W 670
(Transformer connection when the
speaker is supplied from the factory) Set the impedance selector
to the desired impedance.

Wiring diagram Impedance selection

3 [0.12"]
376 [14.8"]
288 [11.34"]
Ă400 [Ă15.75"]

Front View Side View

600
[1.97 ft]
37 [1.46"]

206 [8.11"] BLK WHT

100 [3.94"]
3-Ø11 [Ø0.43"]
51 [2.01"] 51 [2.01"]

Bracket dimensional diagram

UNIT:mm SCALE:1/10

3
Published on 2025/04/16
 TC-651M | Datasheet

A&E specifications
The specified horn speaker shall be designed especially for outdoor applications. The horn speaker shall be a reflex horn type
suitable for paging and tone signaling distribution. The speaker component shall be a compression driver with a polyimide
diaphragm to prevent deformation from heat and improve low frequency [Link] horn speaker shall be a horn speaker
that has been proved to provide 100 or more hours of operation at 50W in a continuous load test employing a test signal that meets
the International Electrotechnical Commission (IEC) 60268-1: 1985 standard. Power handling shall be 50 W. Rated impedance
shall be selectable (200 ohms, 330 ohms, 670 ohms for 100V line; 100 ohms, 200 ohms, 330 ohms and 670 ohms for 70 V line).
The sensitivity measured at 1m with 1 W of power shall be 111 dB. Frequency response shall be 200 Hz to 6k Hz.
Horizontal and vertical dispersion at -6 dB below the on-axis reference at 2k Hz shall be 50° (H) x 50° (V). The paging horn shall
comply with the IEC IP65 standard for dust and water resistance and operate within a temperature range from -20°C to +60°C
(-4°F to +140°F).The speaker shall feature shock-resistant aluminum oval horn. The mounting bracket, bracket holder and the
horn flare shall be treated with 50-micron thick powder paint coating, and external hardware (screws, bolts, nuts) shall be made
of stainless steel. The paging horn shall include an integral speaker cable, insulated polyvinyl chloride type, with strain-relief, 6
mm (0.24")diameter and 600 mm (1.97') length. Dimensions shall be ø400 x 376(D) mm (ø15.75" x 14.8"). Weight shall be 4 kg
(8.82 lb).The reflex horn speaker shall be TOA model TC-651M or equivalent.

Specifications are subject to change without notice. 4

Published on 2025/04/16
 Datasheet

DA-250DH
Digital Power Amplifiers

The DA-250DH is a 2-Channel Digital Power Amplifier designed for 100

V line high-impedance distribution and features lightweight, compact,
high power output, and high efficiency. It delivers 250 W 2 channels (40
· output) using a switching power supply. Each channel is equipped with
an independent power section. It can be electrically isolated from the
high-impedance speaker system by attaching the MT-251H Output
Transformer (optional). It can be mounted in an EIA Standard equipment
rack (1 unit size).
Key features
• 2x 250 W rated output
• 100 V speaker outputs
• Light weight and compact
• Class D design 85 % efficient
• For 19" cabinet rack mounting with 1 U height
• Independent power supply for each channel
• Forced-air cooling system
• Low heat dissipation
• Comprehensive protection circuitry
• Removable dust filters for easy cleaning