Jabalpur Engineering College, Jabalpur (M.
P)
(Declared Autonomous by MP Govt., Alfiliated to RGPV, Bhopal)
(AICTE Model Curriculum Based Scheme)
Bachelor of Technology @.Tech.) UII Semester (All Branches)
w.e.f. July 2023
Subject Maximum Marks Allotted Hours/Week
Code
Theory Practical
Engineering Mid-
Graphics sem
Exam
Course Objectives:
To familiarize with the construction of geometrical figures.
To familiarize with the projection of I D, 2D, 3D elements.
To familiarize with the sectioning of solids and development of surfaces.
To familiarize with preparation and interpretation of building drawings.
Course Contents:
Module-I
Scales: Representative factoq plain scales, diagonal scales, Comparative
scale, Vemier scale, scale of
chords.
conic sections: construction ofellipse, parabol4 hyperbola by different methods;
Normal and Tangent.
special Curves: cycloid, Epi-cycloid, Hypo-cycloid, lnvolute, Evolute,
Archimedean spiral and logarithmic
spiral.
^
[Link]
Projection: Types of projection, orthographic projection, first and third
angle projection, projection of
points and lines, Line inclined to one plane, Line inclined with
both the p"lane, True Lengt1 and True
inclination, Traces of straight lines.
Module-III
Projection of planes and solids: Projection of Planes like circle and polygons
in different positions;
Projection of polyhedrons like prisms, pyramids and solids ofrevolutions
positions..
ti".iina". and cone in different
Module-IV
Section of solids: Section of right solids by normal and inclined planes;
Development of Surfaces: paral)errrine and radial - line method for right
intersection of cylinders.
solids.
Modure-V L/Y---
Isometric -'r""*"rqi*-st+ffipg.9Ut n" axes, Isometric projection from orthographic drawing.
Computer Aided Drafting (CAD): introduction, Benefit, software's basic commands of drafting entities
like line, circle, polygon, polyhedron, cylinders; transformations and editing commands like move, rotate,
mirror, array; solution of projection problems on CAD.
Books References:
1. Visvesvaraya Tech. University; A Premier on Computer Aided Engg drawing; VTUBTlgaum
2. Bhatt N.D.; Engineering Drawing, Charotar
3. VenugopalK; Engineering Graphics; NewAge
4. John KC; Engg. Graphics for Degree; PHI.
5. Gill P.S.; Engineering Drawing; kataria
6. Jeyopoovan T.; Engineering drawing & Graphics using AutoCAD; vikas
7. Agrawal and Agrawal; Engineering Drawing; TMH.
8. Shah MB and Rana BC; Engg. Drawing; Pearson Education.
9. Luzadder WJ and DuffJM; Fundamental of Engg Drawing; PHI
10. Jolhe DA; Engg. Drawing an Introduction; TMH
11. Narayana K.L.; Engineering Drawing; Scitech
Course outcomes:
At the completion ofthis course, students will able to
Leamed about different standard conventions used in drawing'
Capable to construct different scales and curves used in drawings'
Able to do orthographic projection ofvarious drawing entities'
Skilled to produce section of solids, development of surfaces'
Able to draw isometric projections and their importance in product design'
packages'
Prepare a given drawing on computer ai4ed drafting software
(Pos):
Mapping of the course outcomes (COs) with program outcomes
