003_040 atennas e mastheads 23-09-2004 16:54 Pagina 31

Masthead products

A wide range of filters, combiners and amplifiers that unites good

performance with simple installation

Combiners Page 32
Filters and combiners 33
Mast amplifiers - ES series 34
Mast amplifiers - MAP series 35-36
Mast amplifiers - JK-EK series 37
Broadband amplifiers 38
Multi-socket range amplifiers 39
Power suppliers - AM - PSU - AL series 40
003_040 atennas e mastheads 23-09-2004 16:54 Pagina 32

Combiners

TM.. ESP2 ES.. MEF/..

Dimensions mm 74 x 91 x 54 Dimensions mm 74 x 36 x 58 Dimensions mm 74 x 36 x 58 For mast up to ∅ 60 mm max
Dimensions mm 85 x 115 x 64

ANTENNA COMBINERS

Item code Two inputs - one output 75Ohm

For coupling two antennas receiving the same channels. V.S.W.R. < 1.25.
Mast clamp ∅ 42mm max.
No through loss.
Packaging 10pcs

TM5 For UHF band 4

For coupling two antennas of any type. For coupling two signals.
Power pass is available on one or both inputs.
Attenuation 4dB
Separation between two inputs ~ 20dB.
ESP2 Adjustable plastic strap for mast mounting ∅ 60mm max.

MAST COMBINER saddle and clamp connections

Weatherproof plastic housing. V.S.W.R. ≤ 2. Can be used as splitters using the output mix as an input with insertion loss
as shown. Fixing suitable for masts up to ∅ 60mm. Packaging 10pcs

Item code Strap fixing suitable for masts up to ∅ 60mm.

Input bands: VHF, 4 and 5. Atten.: 0.5dB in VHF; 1dB in b. 4 and b.5.
ESV45 Power pass in band 5
Input bands: VHF, 4 and 5. Atten.: 0.5dB in VHF; 1dB in b. 4 and b.5. Band 5 begins at 590MHz (channel
ESV45S E36). Power pass in band 5
Input bands: VHF, UHF, UHF. Atten.: 0.5dB in VHF; 4dB in UHF.
ESVUU Power pass on clamp UHF + d.c.
ES345/43 Input bands: 3, UHF (c. E21 - E41), UHF (channels E43 - E69)

Input bands: VHF and UHF. Attenuation: 1 dB in both VHF and UHF bands.
ESVU Power pass provided in UHF band only

ESVU2 Power pass provided in VHF band only

Two separate outputs. Attenuation: 4dB in VHF and UHF.
ESVU22 Remote power feed is available in VHF. Power pass available on both outputs
Input bands: 5, 4, VHF. Attenuation: 1dB in b. 4 and VHF; 2dB in b. 5. We cannot guarantee pass or
ES54V attenuation in upper band 4 and lower 5. Power pass is available in b. 5 only

For mixing any UHF channel on any type of installation. Selected UHF channel attenuation 2 dB; attenuation
other channels (excluding adjacent ones): 20dB. Attenuation on the down-line existing channels: 0.5dB;
MEF/.. (1) selected UHF channel: 25dB. Packaging 1pc

(1) To complete the code with channel reflence. The two channels or group of channels cannot be adiacent; there can be three groups in band 4 and
four groups in band 5.

32
003_040 atennas e mastheads 23-09-2004 16:54 Pagina 33

Filters and combiners

SF.. FUS/45 PAS ... JS.. MXST

Dimensions Dimensions Dimensions
mm 28 x 78 x 20 mm 85 x 115 x 64 mm 76 x 35 x 89

CHANNEL ATTENUATORS
For installation between the antenna and the amplifier. For two or more sections which can be tuned onto different
frequencies or the same frequency if greater attenuation is required. The various sections are independent and individual
and do not affect each other. To tune, turn the core of the trimmer. D.C. through-line (apart from SF5).
Packaging 10pcs.

Item code Two cells

FOR INDOOR INSTALLATIONS - Coaxial connectors I.E.C. ∅ 9.5mm.

SF4 Stop one or two band 4channels. Attenuation from 20 to 30dB

SF5 Stop one or two band 5channels. Attenuation from 20 to 30dB
FOR OUTDOOR INSTALLATIONS - For mast mounting. Waterproof housing. Screw terminal connectors.
FUS/45 Stop one or two UHF band channels. Attenuation from 25 to 35dB per section. For mast ∅ 60mm max

Five cells
FOR INDOOR INSTALLATIONS
Can be used outside if placed inside a CN1 housing. Female coaxial connectors ∅ 9.5mm. Each cell has
two trimmers for regulating channel attenuation and the width of the attenuated band. Attenuation per cell
FE5U from 6 to 20dB depending on the frequency. May be tuned onto any UHF channel

IMPEDANCE
IZ2 For D.C. transfer between two terminals on multi-band amplifiers. Packaging 100pcs

COMBINER
INPUT 1 INPUT 2 INPUT 3

PAS0303 VHF # UHF # –

PAS0302 VHF + UHF IF # –
PAS0312 VHF UHF IF #
PAS0311 B I - FM B III UHF #
# : indicates that the remote power supply is sent to the corresponding input

INDOOR COMBINER with “F” type connectors

Totally shielded metal frame. V.S.W.R. ≤2.

2 inputs: one VHF+S (40÷446MHz) and one UHF (470÷862MHz).

JSVU3 Attenuation: 1dB on both inputs.

INDOOR TV SAT COMBINER

For mixing or demixing a TV signal with a SAT signal, allowing D.C. between SAT input (output) and output (input).
Packaging 1pc.

2 input: TV and SAT (950÷2150MHz). Attenuation: 0,5dB an both inputs.

MXST Very good TV - SAT isolation and V.S.W.R.
PAS0303011 2 input: TV and SAT (950÷2150MHz). Attenuation: 0,5dB an both inputs.

33
003_040 atennas e mastheads 23-09-2004 16:54 Pagina 34

Multiband mast amplifiers - ES series

ES.. JS2RT
Dimensions mm 74 x 36 x 58 Dimensions mm -- x -- x --

MULTI-BAND MAST AMPLIFIERS - ES series

Weatherproof plastic housing. Strap fixing suitable for masts up to Ø 60mm.
To couple and amplify signals coming from 2 or 3 groups of antennas belonging to the bands shown below.
Shielded saddle and clamp terminals improve isolation between inputs.
Powered via coaxial downlead. One coupled output.
Max. output 108dBµV (250mV).
Noise figure ≤ 4dB.
V.S.W.R. ≤ 2.

Item code Input Amplified bands Power consumption Gain Packaging

No. MHz mA @ 12Vdc dB pcs

ES1/Q 1 174÷862 – 28 12 10
ES1/RVU 2 47÷230 470÷862 27 4÷12 10
ES2/Q 1 174÷862 – 50 22 10
ES2RT 1 47÷862 – 50 8÷23 10
ES2/RU 1 470÷862 – 55 10÷25 10

MULTI-BAND MAST AMPLIFIERS - JS2RT

Totally shielded metal frame
F connector
1 output
Power requirement 12V on the single output
Noise figure ≤ 5dB.
V.S.W.R. ≤ 2.

Item code Input Amplified bands Power consumption Gain Packaging

No. MHz mA @ 12Vdc dB pcs

JS2RT 1 47÷862 6 7÷22 10

34
003_040 atennas e mastheads 23-09-2004 16:54 Pagina 35

MAP series

MAP1.. - MAP2.. - MAP3.. MAP4.. - MAP5..

Dimensions mm 105 x 60 x 95 Dimensionis mm 105 x 60 x120

MAST AMPLIFIER - MAP series - 12 Volts

The MAP amplfiers mix and amplify the signals from one or more antennas.
They are fully screened in a metallic case and have “F” type connectors.
The innovative system of the plastic housing locks the cover in place and rotates the case to guarantee safety and speed on
installation.
Power requirement 12V, on a single output.
V.S.W.R. < 2
Individual amplifiers

No. of Band inputs Gain Max output’s Gain adj. Noise fig. Power con. Packaging
Item code inputs level
(dB typ.) dBµV (dB typ.) dB mA max pcs N
MAP108 1 1+3 25 108 15 5 65 10
MAP107 1 4 24 108 15 5 60 10
MAP104 1 5 25 108 15 5 60 10
MAP105 1 UHF 33 108 15 6 85 10
MAP106 1 VHF + UHF 34 108 15 5 75 10
MAP109(2) 1 VHF + UHF, 5 OUT 17 92 15 4 65 10
MAP205(1) 2 VHF + 4, 5 -2, 11 105 -, - -, 5 40 10
MAP210 2 VHF + 4, 5 -2, 11 105 -, - -, 5 40 10
MAP204 2 VHF, UHF 26, 24 108 15, 15 5, 5 65 10
MAP207 2 3+ UHF, UHF 21, 21 108 15, 15 8, 8 65 10
MAP208 2 3, UHF 34, 35 108 15, 15 4, 3 80 10
MAP206 2 VHF, UHF 35, 36 108 15, 15 5, 5 75 10
MAP303 3 VHF, 4, 5 -2, -2, 12 105 -, -, - -, -, 5 40 10
MAP304(1) 3 VHF, 4, 5 -2, -2, 12 105 -, -, - -, -, 5 40 10
MAP311(3) 3 FM, DAB, UHF -1, 25, 24 105 -, 15, 15 4, 5 60 10
MAP312 3 VHF, 4, 5 25, 24, 25 108 15, 15, 15 5, 6, 6 65 10
MAP313 3 VHF, UHF, UHF 24, 30, 30 108 15, 15, 15 5, 8, 8 80 10
MAP315 3 VHF, UHF, UHF 34, 40, 40 108 15, 15, 15 5, 8, 8 95 10
MAP400 4 VHF, VHF, UHF, UHF -4, 21, 19, 19 105 -, 15, 15, 15 -, 5, 8, 8 60 10
MAP500 5 1, 3, 4, 5, UHF 16, 15, 10, 10, 11 108 -, -, -, -, - 4, 4, 8, 8, 8 40 10
MAP501 5 1, 3, 4, 5, UHF 24, 24, 19, 20, 20 108 15, 15, 15, 15, 15 4, 4, 8, 8, 8 60 10
MAP502(1) 5 1, 3, 4, 5, UHF 16, 15, 10, 10, 11 108 -, -, -, -, - 5, 5, 9, 9, 9 40 10
MAP503(1) 5 1, 3, 4, 5, UHF 24, 24, 19, 20, 20 108 15, 15, 15, 15, 15 5, 5, 9, 9, 9 60 10

(1) Band 4 = ch 21÷32 and band 5 = ch 36÷69.

(2) 1 input and 5 output.
(3) DAB = 216÷240MHz.

35
003_040 atennas e mastheads 23-09-2004 16:54 Pagina 36

MAP series

MAP1.. - MAP2.. - MAP3.. MAP4.. - MAP5..

Dimensions mm 105 x 60 x 95 Dimensions mm 105 x 60 x120

MAST AMPLIFIER - MAP series - 24Volts

The MAP amplfiers mix and amplify the signals from one or more antennas.
They are fully screened in a metallic case and have “F” type connectors.
The innovative system of the plastic housing locks the cover in place and rotates the case to guarantee safety and speed on
installation.
Power requirement 24V, on a single output.
V.S.W.R. < 2
Individual amplifiers

Band Gain Gain adj. Output Noise figure Power Packaging

Item code level consumption
(dB typ.) (dB typ.) dBµV dB mA max pcs

MAP102 UHF 33 15 108 6 70 10

MAP103 VHF + UHF 34 15 108 5 70 10
MAP201 3, UHF 34, 35 15, 15 108 4, 3 75 10
MAP202 VHF, UHF 35, 36 15, 15 108 5, 5 70 10
MAP209 VHF, UHF 26, 24 15, 15 108 5, 5 70 10
MAP300 VHF, UHF, UHF 34, 40, 40 15, 15, 15 108 5, 8, 8 95 10
MAP306 VHF, 4, 5 34, 32, 34 15, 15, 15 108 5, 6, 6 80 10
MAP314 VHF, UHF, UHF 24, 30, 30 15, 15, 15 108 5, 8, 8 80 10
MAP402 VHF, 4, 5, UHF 34, 41, 41, 42 15, 15, 15, 15 108 5, 8, 8, 8 90 10

36
003_040 atennas e mastheads 23-09-2004 16:54 Pagina 37

Multiband mast amplifiers

JK series and EK series

JK … EK5/... - EK6/..
Dimensions mm 100 x 56 x 128 Dimensions mm 112 x 52 x 112

MULTI-INPUT MAST AMPLIFIERS - JK series

Totally shielded metal case with “F” type connectors. Power supply: +12Vdc negative ground. For masts up to Ø 60mm.
To mix and amplify signals from several groups of antennas.
Power supplied through coax cable: 1 mixed output. Gain adjustment (20dB) with independent attenuators.
V.S.W.R. ≤ 2.
Separate VHF and UHF amplification.

Item code No. of Bands Gain (reg.) Noise figure Output level Gain Consumption Packaging
input dBµV adjustment
dB ≤ dB b1 b2 UHF dB mA pcs
JK6QR345(3) 1 3+4+5 19,27,26 4,7,6 108 112 112 x,x,x 100 5
JK6RPUU 3 1+3,UHF,UHF 20+20,29,29 4+4,7,7 105 108 112 x,x,x 75 5
JK6RPUU0(1) 3 1+3,UHF,UHF 20+20,29,29 4+4,7,7 105 108 112 x,x,x 75 5
JK6RP45 3 1+3,4,5 20+20,29,31 4+4,5,5 105 108 112 x,x,x 75 5
JK6RP45S(2) 3 1+3,4,5 20+20,29,31 4+4,5,5 105 108 112 x,x,x 75 5
JK6R1345U 5 1,3,4,5,UHF 21,19,28,28,28 3,3,7,8,7 105 108 112 x,x,x,x,x 75 5
JK6R1345US(2) 5 1,3,4,5,UHF 21,19,28,28,28 3,3,7,8,7 105 108 112 x,x,x,x,x 75 5

MULTI-BAND MAST AMPLIFIERS - EK series

Weatherproof plastic housing. Suitable for mast mounting ∅ 42mm max. For coupling and amplifying the signals from several
groups of antennas. Shielded saddle and clamp terminals for improved isolation between inputs. Powered by coaxial
downlead. One coupled output. V.S.W.R. ≤ 2. Suitable for pre-amplifiers. 12Vdc.
Separate attenuators with adjustable attenuation (20dB).
Separate VHF and UHF amplification.

No. of Inputs bands Gain Noise figure Output level Gain Consumption Packaging
input adjustment
dB ≤ dB dBµV dB mA pcs
EK6/Q-345 1 3+4+5 20,27,25 4,5,5 108,110,110 x,x,x 60 10
EK6RPUU 3 1+3,U,U 21+19,25,25 3.5,8,8 106+108,110,110 x,x,x 60 10
EK6RPUU0(1) 3 1+3+C,U,U 21+19,25,25 3.5,8,8 106+108,110,110 x,x,x 60 10
EK6RP45 3 1+3,4,5 21+19,27,28 3.5,4.5,5 106+108,108,110 x,x,x 60 10
EK6RP45S(1) 3 1+3,4,5 21+19,27,28 3.5,4.5,5 106+108,108,110 x,x,x 60 10
EK6R1345U 3 1,3,4,5,U 23,18,25,25,25 5,5,8,8,8 103,108,108,108,108 x,x,x,x,x 60 10
EK6R1345U0 5 1+C,3,4,5,U 23,18,25,25,25 5,5,8,8,8 103,108,108,108,108 x,x,x,x,x 60 10
EK6R1345US(1) 5 1,3,4,5,U 23,18,25,25,25 5,5,8,8,8 103,108,108,108,108 x,x,x,x,x 60 10

(1) In b. 1 input also passes channel C.

(2) Letter S shows that band is only for channels 21-32, 470÷565 MHz b. 5 is = 590÷862 MHz (channels 36 - 69).
(3) Q in model number indicates one input for bands 3, 4, and 5 with gain adjustment for each band.

37
003_040 atennas e mastheads 23-09-2004 16:54 Pagina 38

Broadband amplifiers

ABLA101-102-3RT JAX13DC - JA21R

Dimensions mm 105 x 62 x 53 Dimensions mm 92 x 49 x 109

INDOOR BROADBAND AMPLIFIERS

MAINS POWERED
Power supply required: 220-230V~ - 50Hz.
Insulation: class II.
Operating temperature: -10°C ÷ +55°C.
240V ± 10% by special order. For all TV bands (47÷862MHz). V.S.W.R. ≤ 2. 1 input - 1 output

Item code No. of Gain (reg.) Max. output Noise figure Power consumption Packaging
transistors dB dBµV ≤ dB W pcs

With shielded clamps

ABLA101 1 8 108 5 1,2 10
ABLA102 2 19 108 5 1,6 10
ABLA3RT 3 14 ÷ 34 (20) 113 5 3,0 10

INDOOR BROADBAND AMPLIFIERS

MAINS POWERED
Power supply 220-230V~ - 50/60Hz. Insulation: class II.
Operating temperature: -10°C ÷ +55°C.
It can be placed either on the back of the TV set, a table or fixed to the wall.
For table and wall mounting remove the hook on the bottom. «F»-type input and output connectors.
Totally shielded RF section to prevent interferences.

Gain No. of Output level Noise figure Band V.S.W.R. Power consumption Packaging
dB outputs dBµV ≤ dB MHz ≤ W pcs

JA21R 7÷22 1 110 5 47÷862 2 3,5 1

TV+SAT BROADBAND AMPLIFIERS (5÷2400MHz)

TV and SAT amplifiers with V.S.W.R. charateristics and typical noise figures of a professional product, to be used as
amplifiers for single SAT systems, Multiswitch and single IF distribution.
Passes the D.C. 22KHz and DiSEqC between input and output.
Power supply: 220-230V~ - 50/60Hz.
Insulation class: II.
Operating temperature: -10 ÷ 55°C.
Totally shielded RF section to prevent interferences.

Gain No. of Output level Noise figure Band V.S.W.R. Power consumption Packaging
dB outputs dBµV ≤ dB MHz ≤ W pcs

JAX13DC 13 1 115 7 5÷2400 1,5 3,5 1

38
003_040 atennas e mastheads 23-09-2004 16:54 Pagina 39

Multi-socket range amplifiers

AMP9201-9200 AMP9300-9301 AMP9311

INTERNAL AMPLIFIERS FOR SMALL BLOCKS OF FLATS

• Metal cased products with F connectors
• CMS components
• F connectors supplied with all products
• Built in 230V power supply

Item code Frequency band Gain Output level Noise figure Consumption Fixing
(per input) (dB) (dBµV) (dB) W

B I - FM 2 - 12
AMP9201 B III 12 -22 105 4 3 Wall
UHF 12 - 22
47-862MHz
AMP9200 20 105 4 3 Wall
broad band

INDOOR APARTMENT AMPLIFIERS

Frequency band Gain Output level Number of Noise figure Consumption Fixing
(per input) outlets
MHz (dB) (dBµV) (dB) W

AMP9300 174 - 862 2 x 14 2 x 98 2 4 2 Wall

With return path for CATV

88 - 862 2 x (5-15)
AMP9301 2 x 104 2 6 2 Wall
5 - 55 -6 dB
AMP9311 88 - 862 2 x (10-16) 2 x 106 2 7 5 Wall

39
003_040 atennas e mastheads 23-09-2004 16:54 Pagina 40

Power supplies
AM series - PSU series - AL series

AM … PSU... AL50S
Dimensions mm 50 x 87 x 46 Dimensions mm 92 x 49 x 109 Dimensions mm 52 x 87 x 84

POWER SUPPLIES - AM series

The new AM series is an effective answer to all power supply requirements that may arise in every aerial installation.
Models available: 12Vdc, 50mA and 100mA.
The new AM series is designed to meet the strictest safety requirements and to shut down in case of a short circuit.
Value for money, the wide range of models and the look of the new AM series makes it the best solution for those
installations where the overall quality is as important as the price.
Input 220-230V~ - 50Hz.
Insulation: class II.
Operating temperature: -10°C ÷ +55°C.

Item code
AM50N Power supply 12Vdc - 50mA - 1 output - Pack. 20pcs
AM100N Power supply 12Vdc - 100mA - 1 output - Pack. 20pcs
AM102N Power supply 12Vdc - 100mA - 2 output - Pack. 20pcs

POWER SUPPLIES - PSU series

STABALIZED
Input: 220-240V - 50/60Hz. Class: II isolation
Temperature of operation: -10° C +55 °C
With short circuit protection.
New plastic case suitable for fixing to a table or a wall.
Low energy consumption “F” type connectors on the input and output.
Componets are screened to prevent any RF inteferences.

Output voltage Power Outputs Packinging

V mA pcs

PSU411 12 200 1 1
PSU412 12 200 2 1
PSU341 24 100 1 1
PSU342 24 100 2 1

POWER SUPPLIES - AL series

Input 220 - 50Hz. Output 12V continous. - Class II isolation.
Temperature of operation: -10° C +55 °C
With short circuit protection and self reset.
Max current 42mA connection.

Output’s tension Power Outputs Packinging

V mA pcs

AL50S(1) 12 42 1 1

(1) With IEC Connector’s Type 9.5mm

40