Scribd
Upload
10 views13 pages

F. Arc Length and Area of Sector - Unlocked

This worksheet provides instructions on calculating arc lengths and sector areas in geometry, featuring worked examples and guided practice questions. It covers both major and minor arcs, detailing the steps to derive the necessary values using given formulas. The document includes sections for practice, allowing students to apply their understanding of the concepts presented.

Uploaded by

owaisanwar001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views13 pages

F. Arc Length and Area of Sector - Unlocked

This worksheet provides instructions on calculating arc lengths and sector areas in geometry, featuring worked examples and guided practice questions. It covers both major and minor arcs, detailing the steps to derive the necessary values using given formulas. The document includes sections for practice, allowing students to apply their understanding of the concepts presented.

Uploaded by

owaisanwar001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

GCSE Maths – Geometry and Measures

Arc Length and Area of Sector


Worksheet

NOTES SOLUTIONS

This worksheet will show you how to work out different types of arc length
and sector area questions. Each section contains a worked example, a
question with hints and then questions for you to work through on your own.

This work by PMT Education is licensed under https://bit.ly/pmt-cc


https://bit.ly/pmt-edu-cc CC BY-NC-ND 4.0

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Section A
Worked Example

Calculate the major arc length of PQ to 1 decimal place.

Step 1: Work out numerical values for r and 𝜃𝜃.

𝑟𝑟 = 4 𝑐𝑐𝑐𝑐

For the major arc length, we use the angle that is greater than 180°.
Angles around a point add up to 360°:

𝜃𝜃 = 360° − 72°
𝜃𝜃 = 288°

Step 2: Substitute the values into the equation.

𝜃𝜃
𝐴𝐴𝐴𝐴𝐴𝐴 𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿ℎ = 2𝜋𝜋𝜋𝜋 ×
360
288
𝐴𝐴𝐴𝐴𝐴𝐴 𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿ℎ = 2𝜋𝜋(4) ×
360

Step 3: Calculate the numerical value of the arc length and round the answer to the required
degree of accuracy.

288
𝐴𝐴𝐴𝐴𝐴𝐴 𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿ℎ = �2(4) × � 𝜋𝜋
360

𝐴𝐴𝐴𝐴𝐴𝐴 𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿ℎ = 6.4𝜋𝜋

𝐴𝐴𝐴𝐴𝐴𝐴 𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿ℎ = 20.106 … 𝑐𝑐𝑐𝑐

The major arc length PQ is 20.1 𝑐𝑐𝑐𝑐 to 1 decimal place.

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Guided Example

Calculate the minor arc length of PQ to 1 decimal place.

Step 1: Work out numerical values for r and 𝜃𝜃.

Step 2: Substitute values into the equation.

Step 3: Calculate the numerical value of the arc length and round the answer to the required degree
of accuracy.

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Now it’s your turn!
If you get stuck, look back at the worked and guided examples.

1. Calculate the minor arc length to 1 decimal place

2. Calculate the major arc length to 1 decimal place.

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
3. Calculate the minor arc length to 1 decimal place.

4. Calculate the major arc length to 1 decimal place.

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Section B
Worked Example

Calculate the area of the major sector to 1 decimal place.

Step 1: Work out numerical values for r and 𝜃𝜃.

𝑟𝑟 = 4 𝑐𝑐𝑐𝑐

For the major sector, we use the angle that is greater than 180°.

𝜃𝜃 = 360° − 72°

𝜃𝜃 = 288°

Step 2: Substitute values into the equation.

𝜃𝜃
𝐴𝐴𝐴𝐴𝐴𝐴𝐴𝐴 = 𝜋𝜋𝑟𝑟 2 ×
360

288
𝐴𝐴𝐴𝐴𝐴𝐴𝐴𝐴 = 𝜋𝜋(4)2 ×
360

Step 3: Calculate the numerical value of the sector area and round the answer to the required
degree of accuracy.

288
𝐴𝐴𝐴𝐴𝐴𝐴𝐴𝐴 = �(16) × � 𝜋𝜋
360

𝐴𝐴𝐴𝐴𝐴𝐴𝐴𝐴 = [12.8]𝜋𝜋

𝐴𝐴𝐴𝐴𝐴𝐴𝐴𝐴 = 40.21 … 𝑐𝑐𝑚𝑚2

The area of the major arc sector is 40.2 𝑐𝑐𝑚𝑚2 to 1 decimal place.

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Guided Example

Calculate the area of the minor sector to 1 decimal place.

Step 1: Work out numerical values for r and 𝜃𝜃.

Step 2: Substitute values into the equation.

Step 3: Calculate the numerical value of the arc area in terms of 𝜋𝜋.

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Now it’s your turn!
If you get stuck, look back at the worked and guided examples.

5. Calculate the area of the minor arc sector to 1 decimal place.

6. Calculate the area of the major arc sector to 1 decimal place.

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
7. Calculate the area of the minor arc sector to 1 decimal place.

8. Calculate the area of the major arc sector to 1 decimal place

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Section C
Worked Example

𝜃𝜃° 3.1cm

Calculate 𝜽𝜽 to 1 decimal place when the minor arc length is 3.5 cm

Step 1: Work out numerical values for r.


𝑟𝑟 = 3.1 𝑐𝑐𝑐𝑐

For minor arc length we use the angle that is less than 180°- calling this 𝑥𝑥°

Step 2: Substitute values into the equation.

𝜃𝜃
𝐴𝐴𝐴𝐴𝐴𝐴 𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿ℎ = 2𝜋𝜋𝜋𝜋 ×
360
𝑥𝑥
𝐴𝐴𝐴𝐴𝐴𝐴 𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿ℎ = 2𝜋𝜋(3.1) ×
360
Step 3: Calculate the numerical value of the arc length in terms of 𝜋𝜋.

𝑥𝑥
𝐴𝐴𝐴𝐴𝐴𝐴 𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿ℎ = �2(3.1) × � 𝜋𝜋
360
6.2𝑥𝑥
𝐴𝐴𝐴𝐴𝐴𝐴 𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿𝐿ℎ = 𝜋𝜋
360

Step 4: Equate the arc length with the value in the question

6.2𝑥𝑥
3.5 = 𝜋𝜋
360

Step 5: Solve for the angle 𝑥𝑥


6.2𝜋𝜋
3.5 ÷ ( ) = 𝑥𝑥
360
64.688. . ° = 𝑥𝑥

Step 6: Calculate 𝜃𝜃
Angles around a point equal 360°

360 − 𝑥𝑥 = 𝜃𝜃
360 − 64.688. . = 𝜃𝜃
295.31. . = 𝜃𝜃
𝜃𝜃 = 295.3 to 1.d.p

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Guided Example

10.3cm
𝜃𝜃°

Calculate 𝜽𝜽 to 1 decimal place when the major arc length is 56.3 cm

Step 1: Work out numerical values for r.

Step 2: Substitute values into the equation.

Step 3: Calculate the numerical value of the arc length in terms of 𝜋𝜋.

Step 4: Equate the arc length with the value in the question

Step 5: Solve for 𝑥𝑥

Step 6: Calculate 𝜃𝜃

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
Now it’s your turn!
If you get stuck, look back at the worked and guided examples.

9. Calculate 𝜃𝜃 to 1 decimal place when the major arc length is 341.3 cm

68 cm

𝜃𝜃°

10. Calculate 𝜃𝜃 to 1 decimal place when the minor arc length is 34.2 cm

14.5 cm
𝜃𝜃°

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc
11. Calculate 𝜃𝜃 to 1 decimal place when the major arc length is 47.7 cm

𝜃𝜃°
11.5 cm

12. Calculate 𝜃𝜃 to 1 decimal place when the area of the major sector is 1876 cm2

32 cm

𝜃𝜃°

https://bit.ly/pmt-cc
https://bit.ly/pmt-edu https://bit.ly/pmt-cc

You might also like