Series 21Y

Piezoresistive pressure transmitters in a compact design

Features

• Compensated over the entire temperature range

• Compact design for space-critical applications
• Robust stainless steel housing
• High long term stability

Technology

• Insulated and encapsulated piezoresistive pressure sensor

• Fully welded design with no internal seals
• Direct analog signal path with high bandwidth

Typical applications

• Industrial applications
• Heat pumps
• Air-conditioning technology
• Food industry

Accuracy
± 0,5 %FS
Total error band
1,5 %FS @ -10…80 °C
Pressure ranges
0…2,5 to 0…1000 bar

Series 21Y
HEX19

68

Version 03/2025
Subject to changes Find your local KELLER contact [Link]
info@[Link]

Page 1 of 7
Series 21Y – Specifications
Standard pressure ranges

Relative pressure Relative pressure Proof pressure Absolute pressure Absolute pressure Proof pressure
PR PR PAA PA
0...2,5 -1...2,5 9 0...2,5 9
0...4 -1...4 12 0...4 0...4 12
0...6 -1...6 18 0...6 0...6 18
0...10 -1...10 30 0...10 0...10 30
0...16 -1...16 48 0...16 0...16 48
0...25 -1...25 75 0...25 0...25 75
bar rel. bar 0...40 0...40 120

Reference pressure at Based on 0...60 0...60 180

atmospheric pressure reference pressure 0...100 0...100
300
0...160 0...160
0...250 0...250 500
0...400 0...400 800
0...600 0...600
1200
0...1000 0...1000
bar abs. bar bar

Reference pressure at Reference pressure at Based on

0 bar abs. (vacuum) 1 bar abs. reference pressure

Performance

Pressure

Non-linearity (best fitted straight line BFSL), pressure hysteresis,

Accuracy ≤ ± 0,5 %FS
non-repeatability

Total error band 0…50 °C ≤ ±1,0 %FS Maximum deviation within the compensated pressure and
Total error band -10…80 °C ≤ ± 1,5 %FS temperature range

Compensated temperature range -10...80 °C

Long term stability ≤ ± 0,3 %FS Per year under reference conditions

Calibrated in vertical installation position with pressure connection facing

Position dependency ≤ ± 1,5 mbar
downwards

Total error band

This graph shows the maximum deviation

over the entire medium temperature range
(-20…125 °C, optional: -40…125 °C) of the
21Y series.

Within the compensated pressure and tem-

perature range, the maximum total error has a
constant value of ± 1,0 %FS (0...50 °C) or ± 1,5
%FS (-10...80 °C).

Experience shows that outside the compensated

temperature range, the total error increases
linearly by 0,04 %FS/K.

Version 03/2025
Subject to changes Find your local KELLER contact [Link]
info@[Link]

Page 2 of 7
Series 21Y – Specifications
Electrical data

Connectivity 2-wire 3-wire

Analog interface 4…20 mA 0…10 V 0,5…4,5 V
Signal output limitation 3,2…22,3 mA -1,2…11,2 V 0,1…4,9 V
Voltage supply 8…32 VDC 13…32 VDC 8…32 VDC
Power consumption < 5 mA < 4 mA

Start-up time (power supply ON) < 5 ms (0…99 %)

Overvoltage and reverse polarity protection ± 32 VDC
GND-CASE insulation > 10 MΩ @ 300 VDC

Analog interface
< (U - 8 V) / 25 mA 2-wire
Load resistance
> 5 kΩ 3-wire
Limiting frequency 1 kHz

Electrical connection
Round plug M12 x 1 DIN EN 61076-2-101, A-coded, 4-pole
Valve connector Form Ci (9,4mm) DIN EN 175301-803 CI (formerly mpm-393)
Plug
Packard plug Metri Pack Series 150 P2S, 3-pin
Valve connector Form A (18mm) DIN EN 175301-803-A (formerly DIN 43650)
Cable ø 3.3 mm, PUR sheath 3-pin / 2-pin

Electromagnetic compatibility

EN IEC 61326-1 / EN IEC 61326-2-3 / EN IEC 61000-6-1 / EN IEC 61000-6-2 / EN IEC 61000-6-3 /
CE conformity as per 2014/30/EU (EMC)
EN IEC 61000-6-4

Mechanical data

Materials in contact with media

Pressure connection Stainless steel AISI 316L
Pressure transducer separating diaphragm Stainless steel AISI 316L
Pressure transducer seal (internal) None
Pressure connection seal (external) FKM (75 Shore, -20…200 °C)

Other materials
Pressure transducer oil filling Silicone oil Others on request

Further details
G1/4 male
G1/8 male
Pressure connection 7/16-20UNF female See Dimensions and options
7/16-20UNF male
1/4-18NPT
Diameter × length ø 16,6 mm × approx. 60 mm
Weight (excluding cable) approx. 50 g

Version 03/2025
Subject to changes Find your local KELLER contact [Link]
info@[Link]

Page 3 of 7
Series 21Y – Specifications
Environmental conditions

Medium temperature range -20…125 °C Optional: -40...125 °C

Ambient temperature range -20…85 °C Optional: -40…100 °C Icing not permitted
Storage temperature range -20…85 °C
IP67 Round plug, M12x1 For relative pressure IP54
IP67 Packard plug For relative pressure IP54

Valve connector, For relative pressure, use a cable with inte-

IP65
Protection Form Ci (9,4mm) grated capillary

Valve connector, For relative pressure, use a cable with inte-

IP65
Form A (18 mm) grated capillary

IP67 Cable For relative pressure IP54

Notes • Degrees of protection are only valid with the corresponding mating plug in the connected state
Vibration resistance 10 g, 10…2000 Hz, ± 10 mm IEC 60068-2-6
Shock resistance 50 g, 11 ms IEC 60068-2-27
Load cycles @ RT (20…25 °C) > 10 mn. pressure cycles 0…100 %FS Pressure ranges > 600 bar on request

Version 03/2025
Subject to changes Find your local KELLER contact [Link]
info@[Link]

Page 4 of 7
Series 21Y – Dimensions and options
Electrical connections

16,6

16,6
16,6

16,6
39 45,5
39 45,5
16,616,6

16,6
n16,6 16,6

16,6
Round plug 2-wire 3-wire Packard plug 2-wire 3-wire

16,6
M12 × 1 4…20 mA 0…max. 10 V 4…20 mA 0…max. 10 V

n16,6
1 +Vs 1 +Vs A n.c. A GND
4 2 n.c. 2 n.c. B +Vs B +Vs
1
3 31
OUT/GND 3 GND C36 OUT/GND C +OUT
3 31 36
2 4 n.c. 4 +OUT
39 45,5
39 45,5
16,6
16,6
16,6

16,6
16,6

16,6
n16,6

n16,6

39 45,5
42 31 36
36
41
41
n16,616,6

16,6

Cable outlet 2-wire 3-wire Valve connector 2-wire 3-wire

16,6

Cable ø 3,3 4…20 mA 0…max. 10 V Form Ci (9,4mm) 4…20 mA 0…max. 10 V

WH OUT/GND WH +OUT 1 OUT/GND 1 GND
GN n.c. GN GND 2 n.c. 2 +OUT
BN 31 +Vs BN +Vs 36 3 +Vs 3 +Vs
4 n.c. 4 n.c.

41 41
16,6

41
Valve connector 2-wire 3-wire
Form A (18mm) 4…20 mA 0…max. 10 V
1 OUT/GND 1 GND
2 n.c. 2 +OUT
3 +Vs 3 +Vs
n.c. n.c.

Version 03/2025
Subject to changes Find your local KELLER contact [Link]
info@[Link]

Page 5 of 7
 10
HEX19 HEX19

15
12
G1/4 1/4-18 NPT
18,6
ASME/ANSI B 1.20.1
ASME/ANSI B 1.20.1
1/4-18NPT
Series 21Y – Dimensions and options
1/4-18NPT
DIN EN ISO 1179-2 ASME/ANSI B 1.20.1
Available pressure
G1/4connections DIN 1/4-18NPT
EN ISO 1179-2 ANSI/ASME B1.1
G1/8 7/16-20UNF
G1/4 male G1/8 male
88

9 HEX19
9 HEX19

8
108
1515
10

HEX17
HEX19 HEX19
HEX17

11,5
11,2
15
1/4-18 NPT
158
12

1/4-18 NPT
G1/8 90°
G1/4 1/4-18 NPT 9
14
18,6 7/16-20UNF
DIN EN ISO 1179-2
ANSI/ASME B1.1 DIN EN ISO 1179-2
ANSI/ASME B1.1
ANSI/ASME B1.1
7/16-20UNF ANSI/ASMEfemale
7/16-20UNF B1.1
7/16-20UNF 7/16-20UNF female
7/16-20UNF male 7/16-20UNF female
DIN EN ISO 1179-2 ANSI/ASME B1.1 ANSI/ASME B1.1
G1/8  2 DAT
2
 7/16-20UNF 7/16-20UNF female
88

HEX17 HEX17  2
7 HEX17 HEX17
11,5
11,2

7
11,5
11,2
8
1015

HEX17
15

90° HEX17
90°HEX17
11,5
11,2
90°
90°
15

9 7/16-20UNF
8

9 7/16-20UNF
7/16-20UNF 90°
G1/8 7/16-20UNF 90°
ANSI/ASME B1.1 / pressure 9 7/16-20UNF
ASME/ANSI B 1.20.1ranges restricted ANSI/ASME B1.1
14
1/4-18NPT 7/16-20UNF
1/4-18NPT
Originalgrösse: A3
Originalgrösse: A3
DATENBLATT 21Y
DATENBLATT 21Y // 21Zio
21Zio
Originalgrösse: A3
8

X19 HEX19
DATENBLATT 21Y / 21Zio
15

1/4-18 NPT
ASME/ANSI B 1.20.1

Other pressure connections available on request.

ANSI/ASME B1.1 ANSI/ASME B1.1

7/16-20UNF options
Other customer-specific 7/16-20UNF female

• Other compensated pressure ranges

• Other electrical connections
 2
• Seal rings made of other materials
8

• Other oil filling types for pressure transducers

• HEX17
Modifications to customer-specific applications
HEX17
17
11,5
11,2
15

90°
90°
9 7/16-20UNF
7/16-20UNF

Version 03/2025
Subject to changes Find your local KELLER contact [Link]
info@[Link]
Originalgrösse: A3
DATENBLATT 21Y / 21Zio Page 6 of 7
Series 21Y – Variants and accessories
Application-specific variants

Air-conditioning technology / HVAC

21Y with solder tube connection available for

large-volume projects

Examples of similar products

• Series 23SY: Piezoresistive pressure transmitters for increased requirements and pressure ranges from 0,1 bar
• Series 25SY: Front-flush piezoresistive pressure transmitters for increased requirements
• OEM series: OEM Pressure transmitters (e.g. Series 9LY or 20Y with thread) for installation in own systems

Scope of delivery

Mating plug to valve connector form Ci Mating plug to valve connector form A

Accessories

Mating plug to round plug M12x1

• Angled socket, cable 2 m

PN 602015.0018
• Female connector, cable 2 m
PN 602015.0017
• Female connector, cable 5 m
PN 602015.0035

Version 03/2025
Subject to changes Find your local KELLER contact [Link]
info@[Link]

Page 7 of 7