1.10.
2 Heat exchangers
Shell and tube exchangers and double pipe heat ASME Sec. I, V, VIlI Div. 1 or 2,
exchangers and process gas waste Heat Boilers and TEMA Class R, API 660
ASME Sec. VIl Div.1/HEI (Heat
Surface condensers
Exchanger Institute)
Air cooled exchangers API 661, ASME Sec. VIl
Plate exchangers API 662, ASME Sec. VillI Div. 1
Vendor's standards and / or ASME
Welded type heat exchanger
Sec. Vill Div. 1
1.10.3 Pressure vessels, reactors and columns
Pressure vessels ASME Sec. VIl Div.1 or 2
1.10.4 Storage tanks
Design and construction of large, welded, low- API 620
pressure storage tanks
Welded steel tanks for oil storage API 650
Pressurized and spherical storage tanks ASME Section VIll, Div. 1 or Div.2
1.10.5 Rotating machinery for process
Compressors
-Axial and centrifugal compressors and API 617
expander-compressors
Reciprocating compressors API 618
Rotary-type positive displacement compressors API 619
Packaged, integrally geared centrifugal air
compressors API 672
Pumps
-Centrifugal pumps API 610, except for slurry pumps or any
other particular pumps which cannot be
covered by API, well known International
standard to be specified.
Positive displacement pumps reciprocating API 674
Positive displacement pumps controlled
volume API 675
Positive displacement pumps rotary
Sealless centrifugal pumps API 676
API 685
Fan
Centrifugal fans API 673
Liquid ring vacuum pumps and compressors API 681
Steam turbines
General purpose steam turbine API 611
steam turbines API 612
Special-purpose applications
Gear
General-purpose gear units API 677
Special purpose gear units API 613
Lubrication, shaft-sealing and control-oil systems and API 614
auxiliaries
Pumps-shaft sealing systems for centrifugal rotary API 682
pumps
Machinery protection systems API 670
Gas turbines API 616
Chemical injection units VENDOR'S standard
Ancillary ltems VENDOR'S standard
1.10.6 Boiler (except for process gas waste heat boilers)
ABMA, Press. parts ASME Sec.1, others vendor's standard or equivalent European standard.
1.10.7 Piping
Process piping: ASTM
1.10.8 Electrical
General IEC, NEC,NEMA, ISO,ANSI,
API,EN,CENELEC,BS
Bearing of motors ISO R281 or equivalent
llumination level API 540
Fire alarm system NFPA, IEC, BS or equivalent
Air craft warning system EC 529, ICAO or equivalent
Cathodic protection system NACE, IEC, NEC or equivalent
Area classification API RP 505 HTAS suggest to use IEC
60079-10 and IP 15 from the Energy
Institute of London- HOLD
Classification of equipment for hazardous areas: IEC,EN,CENELEC,BS,NFPA,ANSI,API
or equivalent (as per licensee approval)
Ex-type electrical equipment selection EC 79
1.11 Instrumentation
General ISO, ISA, API, IEC, NFPA
Orifice ISO 5167
Thermocouple IEC-60584
