S. D.

JAIN MODERN SCHOOL

STD: 9 Ch:7 MOTION NOTES
Topics in the Chapter

• Introduction
• Distance and Displacement
• Uniform and Non-uniform motion
• Speed
• Velocity
• Accelerated and Decelerated motion
• Equations of motion
• Graphical representation of motion
• Uniform circular motion

Introduction

• Rest: A body is said to be in a state of rest when its position does not change with respect to a
reference point.
• Motion: A body is said to be in a state of motion when its position change continuously with
reference to a point.

→ Motion can be of different types depending upon the type of path by which the object is
going through.
(i) Circulatory motion/Circular motion – In a circular path.
(ii) Linear motion – In a straight line path.
(iii) Oscillatory/Vibratory motion – To and fro path with respect to origin.

• Scalar quantity: It is the physical quantity having own magnitude but no direction. Example:
distance, speed.
• Vector quantity: It is the physical quantity that requires both magnitude and direction.
Example: displacement, velocity.

Distance and Displacement

→ The actual path or length travelled by a object during its journey from its initial position to its
final position is called the distance.
→ Distance is a scalar quantity which requires only magnitude but no direction to explain it.
Example: Ramesh travelled 65 km. (Distance is measured by odometer in vehicles.)
→ Displacement is a vector quantity requiring both magnitude and direction for its explanation.
Example: Ramesh travelled 65 km south-west from Clock Tower.
→ Displacement can be zero (when initial point and final point of motion are same)
Example: circular motion.
Difference between Distance and Displacement

Distance Displacement

Length of actual path travelled by an Shortest length between initial point and far
object. point of an object.

It is scalar quantity. It is vector quantity.

It remains positive, can’t be ‘0’ or

negative. It can be positive (+ve), negative (-ve) or zero.

Distance can be equal to displacement Displacement can be equal to distance or its

(in linear path). lesser than distance.

Uniform and Non-uniform Motions

Uniform Motion
→ When a body travels equal distance in equal interval of time, then the motion is said to be
uniform motion.
Non-uniform Motion
→ In this type of motion, the body will travel unequal distances in equal intervals of time.
Two types of non-uniform-motion

(i) Accelerated Motion: When motion of a body increases with time.

(ii) De-accelerated Motion: When motion of a body decreases with time.
Speed

→ The measurement of distance travelled by a body per unit time is called speed.
• Speed (v) = Distance Travelled/Time Taken = s/t
• SI unit = m/s (meter/second)
→ If a body is executing uniform motion, then there will be a constant speed or uniform motion.
→ If a body is travelling with non-uniform motion, then the speed will not remain uniform but
have different values throughout the motion of such body.
→ For non-uniform motion, average speed will describe one single value of speed throughout
the motion of the body.
• Average speed = Total distance travelled/Total time taken
Conversion Factor
• Change from km/hr to m/s = 1000m/(60×60)s = 5/18 m/s
Velocity
→ It is the speed of a body in given direction.
• Velocity = Displacement/Time
→ Velocity is a vector quantity. Its value changes when either its magnitude or direction
changes.
→ For non-uniform motion in a given line, average velocity will be calculated in the same way as
done in average speed.
• Average velocity = displacement/Total time
• For uniformly changing velocity, the average velocity can be calculated as follows :
Avg. Velocity (vavg) = (Initial velocity + Final velocity)/2 = (u+v)/2
where, u = initial velocity, v = final velocity
• SI unit of velocity = ms-1
• Velocity = Displacement/Time
→ It can be positive (+ve), negative (-ve) or zero.
Acceleration
→ Acceleration is seen in non-uniform motion and it can be defined as the rate of change of
velocity with time.
• Acceleration (a) = Change in velocity/Time = (v-u)/t
where, v = final velocity, u = initial velocity
→ If v > u, then ‘a’ will be positive (+ve).
Retardation/Deaceleration
→ Deaceleration is seen in non-uniform motion during decrease in velocity with time. It has
same definition as acceleration.
• Deaceleration (a') = Change in velocity/Time = (v-u)/t
Here, v < u, ‘a’ = negative (-ve).

Graphical Representation of Equation

Distance-Time Graph (s/t graph)
(i) s/t graph for uniform motion:

(ii) s/t graph for a body at rest:

v = (s2 - s1)/(t2 - t1)

∴ v = 0/(t2 - t1) or v=0

But, s2 - s1

Velocity-Time Graph (v/t graph)

(i) v/t graph for uniform motion:

a = (v2 - v1)/(t2 - t1)

But, v2 - v1

∴ a = 0/(t2 - t1) or a = 0
In uniformly accelerated motion, there will be equal increase in velocity in equal interval of time
throughout the motion of body.

Note: The area enclosed between any two time intervals is ‘t2 - t1’ in v/t
graph will represent the total displacement by that body.

Total distance travelled by body between t2 and t1, time intervals

= Area of ∆ABC + Area of rectangle ACDB
= ½ × (v2 – v1)×(t2 - t1) + v1× (t2 - t1)

Equation of Motion (For Uniformly Accelerated Motion)

First Equation: v = u + at
Second Equation: s = ut + ½ at2
Third Equation: v2 = u2 + 2as

Uniform Circular Motion

→ If a body is moving in a circular path with uniform speed, then it is said to be executing
uniform circular motion.

→ In such a motion the speed may be same throughout the motion but its velocity (which is
tangential) is different at each and every point of its motion. Thus, uniform circular motion is an
accelerated motion.

V = 2πr / t