* Recommended Spare Parts **A-0675 Only ***A-0676 Only
Turn knob, Item #13, clockwise to decrease flow, counterclockwise to
increase flow. Each complete turn of the knob results in a 10% change in
stroke setting. Each groove on the spindle, Item #15 Page 4, is equal to
25% change in stroke setting. To adjust pump while stopped, make sure
plunger is in the full forward position.
* Recommended Spare Parts
* Parts are directly interchangable with Series 4100, 4200 and 4300 Pumps
Parts used when a common motor is used to drive more than one Gear Box Assembly
* Apply Lubriplate 630 AA or equal
* Apply Lubriplate 630 AA or equal between shaft and seal lips
*Assembly oil seal flush with end of cartridge
* Recommended Spare Parts
* Parts are directly interchangable with Series 4100, 4200 and 4300 Pumps
Parts used when a common motor is used to drive more than one Gear Box Assembly
Note: Drip Ring moves with the Plunger.
3
/16” ¼”
Item numbers in this chart correspond with drawing on page 8.
¼”
*Recommended Spare Parts
*Volume expressed in U.S. Gallons Per Day
Number of Gear Boxes (possible 2 heads per box)
It is not necessary to remove crosshead, guide rods, or worm gear
in order to remove the drive shaft and its component parts.
