CORNER COLUMN FOOTING DESIGN

F-3
Input Parameters:
Concrete Strenght, fc' = 27 Mpa Longitudinal Bar, Ax = 8
Rebar yield strength, fy = 415 Mpa Traverse Bar, Ay = 6
Net allowable Soil Pressure, qa = 290 kPa Left edge, dx = -0.4
Footing Embedment Depth, Df = 3 m Upper edge, dy = 0.75
Surcharge, qs = 10 kPa Depth, Cx = 0.4
Soil Weight, ws = 16 kN/m³ Width, Cy = 0.3
Footing Thickness, t = 0.3 m Load, Pd = 104.45
Length, L = 1.2 m Load, Pl = 42.37
Width, B = 1.8 m Moment X, Mx= 0
Clear Covering, c = 75 mm Moment y, My= 0
Check Soil Bearing Capacity

Applied Load, Pd + Pl = 146.82

Surcharge, qs (LB) = 21.60
Weigth Footing, (23.5-ws) tBL= 4.86
Pn = 173.28 kN
Mx = -69.312 KNm My = 129.96 KNm
ex = -0.400 > L/6 = 0.2 m Overturned!
ey = 0.750 > B/6 = 0.300 m Overturned!
P 6M < 290.00
qnx(max) = + = 240.67
BL L²B Pass!
P 6M < 290.00
qny(max) = + = 280.78
BL B²L Pass!

Check Thickness ; Two-way Shear

Applied Load, 1.2Pd + 1.6Pl = 193.13

Surcharge, 1.2 qs (LB) = 25.92
Weigth Footing, 1.2(23.5-ws) tLB = 5.83
Pu = 224.88
Mx = -89.9536 My = 168.66
ex = -0.40 m > L/6 = 0.2
ey = 0.75 m > B/6 = 0.3
qumaxx = 312.3389 qumaxy = 364.3954 Kpa
d = 0.209 m
Vux = Pu - qux (Cx+d/2)(Cy+d) = 175.31 KN
Vuy = Pu - quy (Cx+d/2)(Cy+d) = 159.37 KN Check Flexural Reinforcement; Asmin = 0.002Bt
bo = 2(D1 + d) 2(W1 + d) = 0.909 m Mux = Bx²/6 (qux + 2qumin) Muy = By²/6 (quy + 2qum
Ø Vc1 = Ø 0.33 √fc' bo d = 244.32 KN Mux = -6.66 KNm, Muy = -15.62
bc = Long/short side of column 1.3 ,αs = 20 Asx = 1608.50 mm², Asy = 1206.37
Ø Vc2 = Ø[1+(2/βc)].17 √f'c bo d = 314.66 KN Asmx = 1080.00 mm², Asmy = 720.00
Ø Vc3 = Ø[2+(αs d/βc)].083 √f'c bo d = 315.55 KN Sx = 217 mm, Sy = 191.0
Ø Vc = min, Ø (Vc1, Vc2, Vc3) = 244.32 KN ax = Asx fy / 0.85 fc' B = 16.16
Must, ØVc > Vu, 244.32 > 175.31 Pass! ay = Asy fy / 0.85 fc' L = 18.18
Check One-way Shear; Check Tension Contolled Limit Ø=
Vux = .5 (qux+qumin)x1 d B = -1.66 KN ax/d = 0.077 ay/d = 0.087
Vuy = .5 (quy+qumin)y1 d L = 47.27 KN ab/d = 0.502 > ax/d & ay/d,
ØVcx = Ø 0.17 √fc' B d = 249.24 KN Pass! ØMnx = ØAsx fy(d-ax/2) = 120.71
ØVcy = Ø 0.17 √fc' L d = 166.16 KN Pass! ØMny = ØAsy fy(d-ay/2) = 90.08

Therefore use, 1.2x1.8x0.3m thick Footing with 16mmØ Tension Bar Grade (60) sp. @ 217mm and 191mm
along BL respectively O.C.
 2. If
design is
satisfied,
Click the
3. Copy
Title and
and
dragPaste
as
downPicture
a
to Word
little.
16 mmØ Documen
4. Save as
tPDF file.
-0.4 m, 0 from center
0.75 m, 0 from center
0.4 m Input forces here
0.3 m P1 My MZ
104.45 KN 111 17 -13
42.37 KN
0 KNm Check Soil Bearing Capacity
0 KNm -80.22 < 290.00
280.78 < 290.00
Check Thickness ; Two-way Shear
#REF! 175.31
#REF! 175.31
SOIL PRESSURE ALONG X @ FACTORED LOAD
Check One-way Shear 0 1.2 0
249.236 150 -312.339 104.113 156.169444
100
Check Flexural Reinforcement
- 50 #REF! -15.6169
0
0 - 0
-50 1 2
Check Tension Contolled
-100 Limit
ØMny = 0.000
-150
#REF! 0 0.000
-200
-250
-80.22 280.7778
-300
240.6667 -120.333
-350
-104.113 364.3954
312.3389 -156.169 Row 22 Row 23
Max 312.34 364.40 X - Twoway
Min -104.11 -156.17 Positive Negative
Tip
SOIL PRESSURE ALONG0.20
416.45 520.56 X
Y @ FACTORED
1.00
LOAD
200 69.40864 347.0432
quX -34.70 242.93 qu
100
Vu = b1, b2 0.5045 0.4045 Vu
0 Area Punch 0.20407 Vumax
1 Fu -7.08 49.57 2
-100 Vux 231.97 175.31

-200
nt; Asmin = 0.002Bt 1way
Muy = By²/6 (quy + 2qumin) Vu-300
= 224.88 224.88 0.61 0.59
-15.62 KNm X 0.90 0.30
1206.37 mm² -400 217 313.90 102.55 quY
720.00 mm² quX 209.79
Row 22 Row 23 -1.56 Area Punch
mm (Smax=450mm) 366737 Vux 223.17 -1.66 Fu
mm 41.31 Vux
mm 8877.67998 Moment X
0.9 8.87768 Pos Neg
0.087 0.4 0.8
138.82 277.63
> -6.66 Pass! qu 34.70 173.52
> -15.62 Pass! 125562 94171.18 Mu 97.73 -6.6632296
4853.926 4095.5
mm and 191mm 120708 90075.67 Moment Y
120.7076 90.07567 Pos
3 1.80
Y 1.5
3 x m 433.804
Therefore use,
1.2x1.8x0.3m quy 277.63
Mu -15.6169
Mu -15.6169
 0.6 0.9
-0.2 0.9
0.8 0
0.3 0.3

#REF!
ED LOAD #REF! Vu = qu - (WL-(D1+d)(W
1.8
-364.395

0
0
2

0
#REF!

Y - 1way f'c = 27
Positive Negative
ED LOAD 1.291 0.51 -0.209 1.291
373.3607 147.2042
217.19 -8.97
47.26746 412.9742 1.009 0.509 0.909
47.26746 412.9742 0.2 1.65
2 581.8182 3.075 1.5375

X - Twoway 2.3639063 2.3639063

Positive Negative
1.65 0.15 1375.3637
477.18 43.38 Mu = 0 1.5
321.01 -112.79 191.0 0 0.5
0.20 0 1
65.51 -23.02 450 0 433.80401
159.37 247.90 0.002075 -104.11 277.63
123.5468 0 -15.62
105.0148
0.8 0.087

1206
Moment Y 804
Neg 160.8
1.50
0.30
86.7608 thick Footing with Tension Baralong BL re L
 -69.41 16mmØ Tension Bar Grade (60) sp. @ 217mm and 191mm
296.7219 mm and Grade ( ) sp. @
296.7219 Grade (60) sp. @
60

230 33
275 40
415 60
 Mux = 720.00
Muy = -15.62
B= 1.8
L= 1.2
fy
d= 0.209
Column1
###
###
###
qu - (WL-(D1+d)(W1+d))

2.16
0.609
0.509
1.850019 577.83288

0.75
2.5
0.1678189
0.0819351

5.135

5.1961524 0.2467926

,
Ø Vc1
Ø Vc2
Ø Vc3

281.105
0.5625

218.63722
0.16
###
Asx = 1608.4954
Asy = 1206.3716